Environmental Degradation of Engineering Materials & Materials Engineering and Technologies

Preface
Electrochemical Deposition of the Ca-P Coatings on the Porous Nanocrystalline Ti-6Al-4V Alloy
Study of Iron-Based Alloys in Solid Oxide Fuel Cell Temperature and Atmosphere Conditions, Effect of a Silver-Coating
FEM Analysis of Lower Premolar Root Canal Filling
Effect of Cavitation on Absorption and Transport of Hydrogen in Iron
Prevention to Hydrogen Degradation of Steel
Determination of Failure Causes of a Steam Turbine Casing
Effect of the Ceramic Dispersion in the Nickel Matrix Composite Coatings on Corrosion Properties after Plastic Working
Iodine-Induced Stress Corrosion Cracking of Zircaloy-4: Identification of Critical Parameters Involved in Intergranular to Transgranular Crack Propagation
Application of EIS to Study the Corrosion Resistance of Passivated NiTi Shape Memory Alloy in Simulated Body Fluid
Perovskites in Solid Oxide Fuel Cells
The Effect of Low-Temperature Glow Discharge Nitriding of Duplex Stainless Steel on Absorption and Desorption of Hydrogen
Quality Investigation of Au Nanoarrays for Biosensing Application
Preparation and Characterization of TiO2 Nanostructures for Catalytic CO2 Photoconversion
Influence of Type of Material on Performance of Hydraulic Components in Thermal Shock Conditions
Underwater Welding of Duplex Stainless Steel
Degradation of Gel-Coat Layer in Glass/Polyester Laminate in Seawater Environment
Effect of Crystallization Process at Cryogenic Conditions on the Functional Properties of the SUPERSTON Alloy Used in Production the Ship's Propellers
Microbial Aspects in Corrosion Studies of Stainless Steels
Numerical Modeling of Magnetorheological Elastomers Microstructure Behavior under Magnetic Field
Surface Modification of Pure Titanium by TiB Precipitation
Formation of High Corrosion Resistant Nanotubular Layers on Titanium Alloy Ti13Nb13Zr
Electrochemical Properties of Ni-Cr and Co-Cr Alloys Used in Prosthodontics
Wear and Corrosion Characteristics of the Layers Type (Mn-P) Formed on Aluminium Alloys
Formation of Porous Structure of the Metallic Materials Used on Bone Implants
Experimental Investigations of MREs Behavior under the Cyclic Load
Oxidation Time Influence on the Structure of the Cobalt Base Clad Layer and Scale Morphology
Optimization of Self-Organized TiO2 Nanotube Geometry on Ti and Ti Alloys Using Fuzzy Logic Reasoning
Positive Effect of Hydrogen Treatment in Titanium Ti-6Al-4V Alloy
Corrosion of Ni-Al and Ni-Al-Al2O3 Flame Sprayed Coatings of "CastoDyn 8000" System in 0.01 M H2SO4 and 3.5% NaCl Solutions
The Effect of Welding Conditions on Diffusible Hydrogen Content in Deposited Metal
Cavitation Erosion Resistance of Austenitic Stainless Steel after Glow-Discharge Nitriding Process
Evaluation of Hydrogen Degradation by In Situ Ultrasonic Testing
Effects of Laser Remelting at Cryogenic Conditions on Microstructure and Wear Resistance of the Ti6Al4V Alloy Applied in Medicine
Materials Design for the Titanium Scaffold Based Implant
Indoor Atmospheric Degradation of Historical Metal Objects Studied by Spectroscopic Techniques
Modelling of the Heat Flux Density Distribution for Laser Beam Welding
Experimental and Quantum Chemical Study of Quinone Derivatives as Inhibitors of Corrosion and Hydrogen Absorption by Steel