Eco-Materials Processing & Design IV
Published on 7. August 2003
Software
Digital media
388 pages
978-3-03859-925-8 (ISBN)
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Ecomaterials, or "Green Materials", are those designed so as to minimize their environmental impact, while still maintaining or even increasing the desired operational performance. Ecomaterials research is an interdisciplinary field where scientists and engineers with backgrounds in both chemistry, and in materials such as metals, ceramics, polymers, and carbon, are involved in raising the environmental consciousness of industry and in motivating ecological research. This volume contains the papers presented during the fourth international symposium on ecomaterials processing and design, which was held on February 4-6, 2003 in Kangnung, Korea.
Ecomaterials, or "Green Materials", are those designed so as to minimize their environmental impact, while still maintaining or even increasing the desired operational performance. Ecomaterials research is an interdisciplinary field where scientists and engineers with backgrounds in both chemistry, and in materials such as metals, ceramics, polymers, and carbon, are involved in raising the environmental consciousness of industry and in motivating ecological research. This volume contains the papers presented during the fourth international symposium on ecomaterials processing and design, which was held on February 4-6, 2003 in Kangnung, Korea.
More details
Language
English
Place of publication
Switzerland
Publishing group
Trans Tech Publications
Target group
Professional and scholarly
Dimensions
Height: 142 mm
Width: 125 mm
Thickness: 10 mm
Weight
200 gr
ISBN-13
978-3-03859-925-8 (9783038599258)
DOI
10.4028/www.scientific.net/MSF.439
Schweitzer Classification
Other editions
Additional editions
Trans Tech Publications Ltd | Hyung Sun Kim | Sang Yeup Park
Eco-Materials Processing & Design IV
E-Book
11/2003
Trans Tech Publications Ltd
€211.86
Available for download
Hyung Sun Kim | Sang-Yeup Park | Soo Wohn Lee
Eco-Materials Processing & Design
Book
08/2003
1st Edition
Trans Tech Publications Ltd
€158.00
Article exhausted; check different version
Content
Lead-Free Layered Perovskite Film Capacitor for Ferroelectric Random Access MemoryEffects of Fourth Alloying Additives on Interfacial Microstructure of Sn-Ag-Cu Lead-Free Soldered JointsEffect of Viscosity of Liquid Resin on Resin Self-Alignment CapabilityApplication of Lead-Free Glass to Barrier Rib Materials in Plasma Display PanelJoining and Processing in Engineering Ceramics to Metallic Materials, in Biomorphic SiC Ceramics, and in Bioactive and Bioinert CeramicsBiocompatibility of Plasma-Sprayed Biomedical CoatingsTiO2-Coated Plastic Optical Fibers for PurificationPorosity Variation on the Compressive Deformation of Pre-Sintered Al-Si-Fe Based AlloyMechanical Characteristics of Mg and its Composites Recycled from Mg ChipsViscosity and Surface Tension of Al and Effects of Additional ElementTin-Cobalt Alloy Plating in a Pyrophosphate BathPorosity-Grading Porous Materials by Centrifugal SinteringImprovement of Strength in Porous Ceramics by Control of AdditivesMicrostructure and Mechanical Behavior of Porous/Dense Alumina Multilayer CompositesMicrostructure and Wear Properties of Al2O3/TiO2 NanocompositesPreparation of Fine Alumina Dispersed Ytterbia-Stabilized Cubic Zirconia Based CompositesFracture and Tribological Behaviors of Al2O3 / 5 vol.% SiC NanocompositesEffect of Chemical Composition on the Grain Orientation of Alumina in Oxide Laminate Composites Effect of Silicate Addition on the Microstructure Texturing of Alumina Laminate Composites Synthesis of Calcium Sulfoaluminate Clinker Using Alunite Effect of WC Particle Size on Grain Growth Inhibition in the WC-xVC-Co SystemMechanical and Thermal Properties of Hot-Pressed Si3N4 with Added AlNEffect of Compaction Pressure on the Microstructure Evolution of Anode Substrate for SOFC ApplicationProperties of Hot-Pressed AlN/BN Nanocomposites Measurement Method of Carbon Char Content from Industry SludgeHydrogen Treatment of Ti ScrapEffect of Viscosity on the Separation of Copper from Al2O3-CaO-SiO2-10wt%MgO Slag SystemImprovement of Silver Recovery Efficiency by High-Speed RotationSynthesis of Ordinary Portland Cement Clinker Using Waste POSCO SludgeCharacterization of Waste Vinyl from a Farm Village and its Application to Cement Kiln ProcessCharacterization of Glass Abrasive Sludge and its Reutilization as a Cement AdmixtureProduction and Properties of Glass-Ceramic from Incinerator Fly AshSilica Honeycomb-Crystal Structure Prepared by Fabrication of Silica-Coated ParticlesEffect of Gas Bubbling and Impeller Agitation on Degassing Kinetics during Magnesium Alloy (AZ91D) Melt Recycling ? Water Model ApproachFlow Modeling in Negative-Pressure Infiltration Casting Process of Aluminum Open-Cell Fabrication Discharged Photoelectrocatalytic System for the Enhancement of Photocatalytic PerformanceAdsorption of Heavy Metal Ions onto the Surface of Metal-Incorporated Hydrous Ferric Oxide ParticlesEffect of Phosphorus or Boron Addition on Water-Resistance of Water-Glass AdhesivesFabrication and Sagging Behavior of Three-Layer Al-Si/Al-Mn-Zn/Al-Si Clad Sheets for Automotive Heat ExchangerImprovement in Mechanical Properties of Magnesium Alloy (AZ31) Sheet Fabricated by Casting and Subsequent Plastic WorkingFabrication of Various Nano Noble Metal Composite Materials by Ecological Sono-ProcessEvaporation Behavior of Magnesium under Reduced Pressure Influence of Final Crystal with Synthesis of Basic Calcium Carbonate by Carbonation ProcessFabrication of Metastable Oxide Ceramics with Oxygen VacancySintering Behavior and Electrical Properties of (Bi1/2 Na 1/2) 0.99Ca0.01TiO3 Ceramics by Two-Stage Calcination MethodEffect of Different Annealing Condition on Bake Hardenability for Environmental Automotive Panel Preparation of TiO2 Fiber and Its Photocatalytic PropertiesPlasma Model in Aluminum Nano-FilmsEffect on Compression Properties of Al Alloy Foam Materials by Added SiEffect of TiO2 Powder Size on the Reactivity of PhotocatalystMechanical Properties of Ti3SiC2 Synthesized by Reaction Sintering Organism Resolution Ability of Titania Photocatalyst in WaterSynthesis and Photocatalytic Properties of Nano TiO2 Coated on Fly AshNano-Scaled Microstructure and Tensile Behavior of Spray-Formed and Subsequently Worked Al-8Fe-2Mo-2V-1Zr AlloysPrecipitation Behavior and Mechanical Properties of a Supersaturated Co-Based SuperalloyPolypyrrole-Based Methanol Sensors Prepared by Chemical and Vapor State PolymerizationSensing Mechanism of Conducting Polymer Sensor for Volatile Organic CompoundsApatite-Coated Titanium Dioxide PhotocatalystVolatile Organic Gas Recognition Using Conducting Polymer Sensor ArrayFabrication and Sensing Behavior of NASICON Thick Film SO2 Gas Sensor by Screen-Printing MethodFabrication and Microstructure of Pt/SiO2 Composite Membranes by a Reverse Micelle and Sol-Gel Gas Sensing Properties of Nanocrystalline ITO Thick Films with Different Particle Sizes