Advances in Safety and Structural Integrity 2005

Fatigue Test of Al-3%Ti Using Axial Loading Testing Machine for RF MEMS Switch Corrosion Fatigue Characteristics of Artificially Sensitized Austenitic STS304A Study on the Evaluation of Pipe Fracture Characteristics Excavation-Induced Buried Pipeline Failure ? A Case Study The Oxidation and High Temperature Fatigue of P23 AlloyStructural Stress Based Fatigue Life Evaluation for Heat Exchanger Motor Operated ValveDetection and Evaluation of Localized Damage under Creep-Fatigue Loading at 1000?F Using Acoustic Emission Technique Analysis of Three-Dimensional Cracks with Independent Crack Mesh A Method of J Testing Based on Crack Opening Displacement for Circumferential Through-Wall Cracked Pipes under Combined Tension and Bending Interrelationship between Stress Intensity Factor and Acoustic Emission Parameter in the Opening Mode Fatigue Crack PropagationA Study on Characteristics of Leak Signals of Pipeline Using Acoustic Emission TechniqueQuantification of Crack-Tip Constraint Effect on Master Curve Reference Temperature Based on Two-Parameter ApproachApplication of Ultrasonic Phased Array Techniques for Inspection of Stud Bolts in Nuclear Power PlantsA Nondestructive Life Evaluation Using Creep-Fatigue Damage by SDAUltrasonic NDE System Modeling and Reliability ? An OverviewEvaluation of CVD Diamond Coating Using Back-Reflected Rayleigh Surface WaveOn-Line Monitoring to Detect Third-Party Damage on Underground Natural Gas Pipelines Using Accelerometer Virtual Demonstration Tests of Large-Scale and Complex Artifacts Using an Open Source Parallel CAE System, ADVENTURENumerical Modeling for the Characterization of Flow Excitation for the HDD Disk Vibration ControlDynamic Analysis of Contacting Spur Gear Pair for Fast System Simulation Calculation of Radiation Beam Field from Phased Array Ultrasonic Transducers Using Expanded Multi-Gaussian Beam ModelStudy on Large Scale Analysis for Infra-StructureNumerical Analysis of Compound ECT Signals due to Various Tube Defects near Support Plate in Steam Generator Effects of Varying Boundary Conditions on the Buried PipelinesCleavage Fracture Evaluation Using Local Approach for SA508 Carbon Steel at -60?CDevelopment of a Neural Network-Based Real-Time Fatigue Monitoring System for the Heavy Load Carrying FacilityThe Effect of Surface Roughness on Wear-Life of DLC Coated Silicon Disk in Dry SlidingReliability of Buried Pipeline Using a Theory of Probability of FailureRisk Assessments of Columns Using RBI Program in Petrochemical PlantEstimation of the Number of Physical Flaws from Periodic ISI Data of SG Tubes Using Effective PODEvaluation of Degree of Sensitization and Corrosion Characteristics for Artificially Sensitized Austenitic STS304Evaluation of the Burst Properties of a Steam Generator TubeSimplified Static Analysis for Shock Behavior Evaluation of Thin Glass PlatesThe Effect of Various Surface Coatings on Tribological Characteristics of Rotary Compressor Vane in Carbon Dioxide Environment