Advances in Safety and Structural Integrity 2005

<ul><li>Fatigue Test of Al-3%Ti Using Axial Loading Testing Machine for RF MEMS Switch </li><li>Corrosion Fatigue Characteristics of Artificially Sensitized Austenitic STS304</li><li>A Study on the Evaluation of Pipe Fracture Characteristics </li><li>Excavation-Induced Buried Pipeline Failure - A Case Study </li><li>The Oxidation and High Temperature Fatigue of P23 Alloy</li><li>Structural Stress Based Fatigue Life Evaluation for Heat Exchanger Motor Operated Valve</li><li>Detection and Evaluation of Localized Damage under Creep-Fatigue Loading at 1000 degreesF Using Acoustic Emission Technique </li><li>Analysis of Three-Dimensional Cracks with Independent Crack Mesh </li><li>A Method of J Testing Based on Crack Opening Displacement for Circumferential Through-Wall Cracked Pipes under Combined Tension and Bending </li><li>Interrelationship between Stress Intensity Factor and Acoustic Emission Parameter in the Opening Mode Fatigue Crack Propagation</li><li>A Study on Characteristics of Leak Signals of Pipeline Using Acoustic Emission Technique</li><li>Quantification of Crack-Tip Constraint Effect on Master Curve Reference Temperature Based on Two-Parameter Approach</li><li>Application of Ultrasonic Phased Array Techniques for Inspection of Stud Bolts in Nuclear Power Plants</li><li>A Nondestructive Life Evaluation Using Creep-Fatigue Damage by SDA</li><li>Ultrasonic NDE System Modeling and Reliability - An Overview</li><li>Evaluation of CVD Diamond Coating Using Back-Reflected Rayleigh Surface Wave</li><li>On-Line Monitoring to Detect Third-Party Damage on Underground Natural Gas Pipelines Using Accelerometer </li><li>Virtual Demonstration Tests of Large-Scale and Complex Artifacts Using an Open Source Parallel CAE System, ADVENTURE</li><li>Numerical Modeling for the Characterization of Flow Excitation for the HDD Disk Vibration Control</li><li>Dynamic Analysis of Contacting Spur Gear Pair for Fast System Simulation </li><li>Calculation of Radiation Beam Field from Phased Array Ultrasonic Transducers Using Expanded Multi-Gaussian Beam Model</li><li>Study on Large Scale Analysis for Infra-Structure</li><li>Numerical Analysis of Compound ECT Signals due to Various Tube Defects near Support Plate in Steam Generator </li><li>Effects of Varying Boundary Conditions on the Buried Pipelines</li><li>Cleavage Fracture Evaluation Using Local Approach for SA508 Carbon Steel at -60 degreesC</li><li>Development of a Neural Network-Based Real-Time Fatigue Monitoring System for the Heavy Load Carrying Facility</li><li>The Effect of Surface Roughness on Wear-Life of DLC Coated Silicon Disk in Dry Sliding</li><li>Reliability of Buried Pipeline Using a Theory of Probability of Failure</li><li>Risk Assessments of Columns Using RBI Program in Petrochemical Plant</li><li>Estimation of the Number of Physical Flaws from Periodic ISI Data of SG Tubes Using Effective POD</li><li>Evaluation of Degree of Sensitization and Corrosion Characteristics for Artificially Sensitized Austenitic STS304</li><li>Evaluation of the Burst Properties of a Steam Generator Tube</li><li>Simplified Static Analysis for Shock Behavior Evaluation of Thin Glass Plates</li><li>The Effect of Various Surface Coatings on Tribological Characteristics of Rotary Compressor Vane in Carbon Dioxide Environment</li></ul>