Material Engineering and Application II

Effect of Plating Thickness on Fatigue Strength of Galvanized SteelInfluence of Nano-Silica Dosage on Properties of Cement Paste Incorporating with High Calcium Fly AshMechanical and Shrinkage Behaviors of Ductile Fiber-Reinforced Polymer Repair MortarDevelopment of a TAPE-Agar Liquid Gel BandageFrequent Start-Stop Test Study of Graphene Coatings on Journal BearingsA New Technology to Prevent the Formation of Limescale in Hot Water Supply SystemsDevelopment of a CuFe2O4 - Reduced Graphene Oxide-Based Electrochemical Sensor for MalathionNano-Crystallization of Steel Surface by Slide-BurnishingNumerical Simulation of Material Plastic Deformation Using the Drawing Forming Process of Contoured Internal Surface TubesSolvent Absorption and Dissolution Kinetics Modelling for the Chemical Recycling of Waste Plastic LaminatesFeasibility of Paper Production from Oil Palm Trunk Using Arrowroot Flour as a BinderStudy on Morphology Features and Mechanical Properties of Nanofibers Films Prepared by Different Composite Electrospinning MethodsStudying the Stability and Conductivity of the Composite Films via Electrospinning/Spray ProcessElectrospinning/Spray: The Interaction between Graphene Nanosheets and Different NanofibersTensile Properties of Cellulose-Filled Recycled Thermoplastic Composite Filaments for 3D Printing3D Reconstruction of Microstructure for Centrifugal Casting Babbitt Lining of Bimetallic Bearing Based on MimicsX-Ray Powder Diffraction Data and Crystal Refinement of Ternary Compound Ti4ZrSi3The Green Preparation of Cellulose Fibrils from Oil Palm Leaf Stalk Fibers for Hydrogel ApplicationsEvaluation of Recycled Aggregate (RAP) Presence Impact under Indirect Tensile Strength of Bitumen Stabilized Mix with Foamed Asphalt for a Base LayerScanning Electron Microscope in Rocks and their Comparison with Physical-Mechanical PropertiesNatural Additive to Retard the Setting of a Mortar and Increase its ResistanceElectrochemical Synthesis of Hydroxyapatite Nanosheet-Assembled Porous Structures with Bipolar MembraneThe Comparison between Mechanical Properties of Laser-Welded Ultra-High-Strength Austenitic and Martensitic SteelsMechanical Properties of Concrete Using Treated Recycled Concrete Aggregate in Marine EnvironmentFailure Analysis of Spur Gears Used in Transmission System Applied on a Hand TractorBiofuel Production from Jatropha Bio-Oil Derived Fast Pyrolysis: Effect of Catalysts SupportedExperimental Investigation and Modelling of Claystone from Mae Moh Coal Mine, ThailandPreliminary Investigation of Crushed Rock-Based Geopolymer for Road ApplicationsHemp Fiber Reinforced Geopolymer Composites: Effects of NaOH Concentration on Fiber Pre-Treatment ProcessCrushed Rock Geopolymer as a Future Road Construction Material: An Evaluation on Strength Performance and Compaction CharacteristicsResponse Behavior of Local Surface Failure due to Repetitive Impact of Stainless SteelStudy of Properties of 3D Printed Short Carbon Fiber CompositeHigh Purity Lime as an Ecologic Alternative for Construction Mortars and PastesCemented Mortar Matrices Densified with Organic AdditionsEvaluation of the Electrical Resistivity, Ultrasonic Pulse Velocity and Mechanical Properties in Portland Cement Pastes Type IICharacterization of Hydraulic Concrete with Polystyrene-Based EmulsionPreparation and Performance Study of Fluorosilicone Oligomer Anti-Sticking CoatingsThe Effect of Alloying on the Fractional Composition, Shape and Grain Size Distribution of the Structure Alloy GAP the Fe-Nd-B SystemOptimization of Methylene Blue Adsorption via Functionalized Activated Carbon Using Response Surface Methodology with Central Composite DesignRejection Rate Reduction of the Automotive Thermoplastic Parts in Injection Moulding Using Response Surface MethodologySimulation of Gap Flow Field in EDM Process Uesd Oil-in-Water Working FluidSynthesis, Preparation and Characterization of Amine-Induced Bacterial Cellulose-Poly(Vinyl Alcohol) Semi-Interpenetrating Network HydrogelEffect of Substrate Temperature on the Electronic Properties of MgO Thin Films on Si (100) Grown by Electron Beam EvaporationButton of Hydroxyapatite Composite for Craniotomy Flap Fixation: Fabrication and Mechanical PropertiesAnalysis of Physical and Mechanical Properties of Backhoe's Bucket Repairment with Cladding MethodeFabrication Study of Cu-C-Ni for EDM Electrode by a Sintering TechniqueSynthesis and Characterization of Active Biocarbon Material for Use in Cosmetics and Personal Care ProductsCharacterization of Adsorbents Derived from Palm Fiber Waste and its Potential on Methylene Blue AdsorptionPotential Activity Evaluation of Phosphorus on CoMo/Al2O3-TiO2 Catalysts to Co-Processing ModelInvestigation of the Tensile and Flexural Behavior of Polylactic Acid Based Jute Fiber Bio CompositeFatigue and Fracture Mechanism of Aluminum-Carbon Fiber Reinforced Hybrid CompositesFatigue-Corrosion of High Strength Steels in Synthetic Seawater under Cathodic ProtectionEffect of Cr and Si Contents on the Magnetic and Mechanical Properties of Fe-Cr-Si Alloys by MIM ProcessMicrostructure and Mechanical Properties of Laser Welded 316L SLM PartsThe Effect of Calcination Temperature on Metakaolin Characteristic Synthesized from Badau Belitung KaolinFlavor Quality Changes of Turbot (Psetta maxima) Stored at -2 and 0°CInvestigation on Mechanical Behavior of Sisal Fiber Reinforced Polylactic Acid and Sisal/Epoxy CompositesEvaluation of Mechanical Properties of Sugarcane Reinforced Hybrid Natural Fibre Composites by Conventional Fabrication and Finite Element MethodStudy of Deep Cryogenic Treatment Process Effect on Microstructure and Properties of CuBeZr AlloyCasting of High Aluminum Content AM Series Magnesium Alloys by Using a Horizontal Twin Roll CasterEstimation of Cold Roll Forming Characteristics of Wrought Magnesium Alloy with Tension-Compression AsymmetryAnalogy of Non-Destructive Tests for the Detection of Defectologies in Aluminium Cylinder HeadsSurface Roughness Prediction Based on Acoustic Emission Signals in High-Precision Diamond Turning of Rapidly Solidified Optical Aluminum Grade (RSA443)Flow Field Analysis and Experimental Investigation of Electrochemical Etching3D FEM Study of the Flow Uniformity of Flat Polypropylene Film/Sheet Extrusion DiesPrediction of the Fatigue Life of the SAE 5160 Carbon Steel Coil Spring Based on Strain-Life ApproachDesign and Optimization of Die Body for Polymer Extrusion