Eco-Materials Processing and Design IX

Nano-Sized Nitrogen-Doped Ti-W Mixed Oxides: Preparation and Enhanced Photocatalytic Activities under Visible Light IrradiationTreatment Performance of Photocatalysis/H2O2/Metal Membrane Process for Organics RemovalTest Method for Skin Damage of Titania Photocatalyst Nanoparticles In VitroSurface Roughness Control of Zirconia Films Using a Novel Photoresponsive Precursor Molecule for Improving its Photocatalytic Activity Influence of Calcination Temperature on the Microstructure of Porous TiO2 Film Nanocrystalline TiO2 Coated-Fabric for UV Shielding and Anti-Bacterial FunctionsPreparation of Ultrafine TiO2 Nanofibers and their Application in Removal of NOx in AirPerformance of Photocatalysis/Chemical Oxidants in Aqueous TiO2 SuspensionsRemoval of Refractory Organic Compounds Using Peroxy Radical and Ozone Reaction in Aqueous SolutionPhysicochemical Characteristics of ZnS Immobilized on Spherical Activated Carbon for Removing HA(Humic Acid)Characterization of Anodized TiO2 for Hydrogen Evolution in Enzymatic PEC System Machinability and Microstructure of SiC/h-BN Nano-Composites Investigation on Gel Casting Preparation of Porous Si3N4 Ceramics through Orthogonal Experimental DesignInvestigation of Mechanical Property and Thermal Shock Behavior of Machinable B4C/BN Ceramics CompositesHigh Temperature Oxidation of WC-CrN Superhard Nanocomposite Film Synthesis of MgO Thin Film Deposited on Soda Lime Glass by Sol-Gel ProcessStudy on the Recognition of the Registration Marks for Low-Energy Microcolumn Lithography Properties of Nano-Hybrid Sol-Gel Coating Films Synthesized with Colloidal Silica and Organoalkoxy SilanesStructural and Electrical Properties of Vanadium Tungsten Oxide Thin Films Grown on Pt/TiO2/SiO2/Si Substrates Synthesis of Nickel Coated Gadolinia Doped Ceria Nanopowder by Microwave Radiation Analysis of Cell Toxic Experiments in New Synthetic Compounds from Nano-Scaled CollagenCorrosion Resistance of TiAlN/ZrN and TiCrN/ZrN Multilayers during Heat Treatment Mechanical Performances of ZTM/SiC Nanocomposite Optimized through Composition and Microstructure Tailoring Phase Analysis in the Region Brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron Backscatter DiffractionThe Mechanical Properties of AlN/BN Laminated Ceramic Composites Comparative Studies on Microstructure and Mechanical Properties of CrN, Cr-Mo-N and Cr-Si-N Coatings Syntheses and Mechanical Properties of Ti-Al-Si-C-N Coatings by a Hybrid Coating System Pressureless Brazing of Zirconia to Stainless Steel Using Active Filler Metal with TiH2 Powder Investigation of Cu/Al Metal Laminates Prepared by Plasma Activated Sintering (PAS) Two-Step Planarization of ECMP and CMP for MEMS Copper PatternsOptimum Material Design of Metal-Ceramic Hybrid Functionally Graded CompositeVacuum Breakdown Behavior of CuWCr Composites Experimental Analysis in Lithium Niobate CMP for Room Temperature Bonding The Effect of Mixed Abrasive Slurry on CMP of 6H-SiC SubstrateThe Effects of Various Substrate Temperature of Bi2O3 Buffer Layer on SBT (SrBi2Ta2O9) Thin Films Deposited by R.F. Magnetron SputteringOxidation Behavior and Cutting Performance between Ti0.75-Al0.25-N and Ti0.69-Al0.23-Si0.08-N Coated Tool through Measurement of Cutting TemperatureStress-Induced Martensitic Transformation of Metastable Ti-Nb-Ge Alloys for Biomedical ApplicationDry Sliding Wear Characteristics of Ti-Nb-Si Alloys for Biomedical ApplicationCrystallization Kinetics for Synthesis Hyper-Structure in P2O5-ZnO-B2O3-BaO-Al2O3-TiO2 Glass Ceramic Composite Optical Property of Hybrid Material Including Crystalline in Amorphous MatrixThe Preparation and Characterization of Organic Solvent Dispersible Polyaniline Coated Titania Hybrid Nanocomposites The Adhesion Evaluation of Thin Hard Coatings on Tool Steel with Nitride or Non-Nitride Layer Using the Scratch Test The Electrical Properties of PLZT Thin Films on ITO Coated Glass with Various Post-Annealing Temperature Mechanical Properties and Microstructure Observation with Grain Refinement in CuZnAl Alloy Formation of TiO2 Coating Layer on the Surface Treated Ti Alloys Deposition of ISZO Films on Polymer Substrate Using Two CathodesMechanical and Electrical Properties of Ga-Doped ZnO Films Deposited on Flexible Substrate by DC Magnetron Sputtering A Study on the SiC/Al Composites Fabricated by Pressureless InfiltrationThe Resistivity-Temperature Property of Transition Metal Oxide Co3O4 with In2O3 AdditionThe Effect of Alloying Cu on Pitting Corrosion Resistance of Copper-Bearing Ferritic Stainless Steel Removal of Carbon Nanoparticle Using NO2 Oxidation TechniqueEffect of MSW Incineration Bottom Ash in Clay Based CeramicsManufacturing of Construction Materials from Municipal Incinerator Residue Adsorption Behavior of Barley Straw Carbon for Chromium (VI) IonGelatin-Glutaradehyde-Poly(Vinyl Alcohol) Bioadsorbent: Synthesis, Characterization and Application for Copper(II) Ion Removal from Synthetic Aqueous SolutionPhotocatalytic Cr(VI) Reduction by Anodized TiO2Fabrication of WC and WC(Co) Codeposited Nickel Composite Coating by Electroplating Method for the Replacement of Chromium CoatingOil Removal Using Diethyl Ether Extracted and Ground Kenaf CoreProperties of Permeable Concrete Substrate Having Dual Pore StructuresFabrication of Porous ?-Tricalcium Phosphate with Collagen Composite MaterialsAbsorption and Preservation of Bentonite Containing SmectiteAbsorption of Bentonite Compact with Absorbent PolymerPreparation and Characteristics of Eu and Dy Doped Sr4Al14O25 PhosphorOptimization of Earth Resistance by Investigating the Surge-Wave Response Numerical Simulation of Heat Evolution of Eco-Friendly Blended Portland Cements Using a Multi-Component Hydration ModelNumerical Simulation of Autogenous Shrinkage of Eco-Friendly Blended Portland Cements Using a Multi-Component Hydration ModelUsing of Ethylene Glycol as Pore-Form Agent to Form Interconnected Mesopores in Carbonized Phenol Resin Effect of Different Upper Side Types of Plaster Molds on the Pore Formation of Al Foams via Upward Foaming Method Comparative Study on TiH2 and CaCO3 for Fabrication of Mg Alloy Foams Anisotropic Mechanical Properties of Nickel Foams Fabricated by Powder MetallurgyConcentration of Organic Acid from Fermented Food Wastes Using a MF/RO ProcessEffect of Different Chemical and Physical Characteristic Having Lignocellulosic Fibers on Heavy Metal Ion Removal from Auqueous Solution Fabrication of Porous Plate with Bimodal Pore Size Distribution Using Molten Slag from Incinerator Development of A3003 Alloy Tube for Eco-Friendly Refrigerant ApplicationAn Experimental Study of the Characteristics of Environment-Friendly Construction Materials by Recycling Sewage Sludge Ash Charge and Discharge Properties of Hydrogen in the Alloy Hydride System with Open Cell Al FoamPreparation and Characterization of High Compressive Strength Geopolymeric Monoliths Using Silica Waste Development of Free Nitric acid, Non-P Desmut Solution for Surface Treatment Aluminium Alloys Effect of Impurities on Formation of Pores in Porous Alumina during Unidirectional Solidification Development of Inorganic Binder with MSWI Ash Comparison of Porous Ceramic Materials with Low Thermal Expansion Coefficient Prepared with SiC and Black-Al2O3Development of Porous Materials Using Sewage Sludge by Molten-Salt Method Zeolite Synthesis Using Sewage Sludge by Molten-Salt MethodEffect of SPS on Surface Characteristics of Gas-Atomized Mg-6wt%Al-1wt%Zn Alloy by Non-Hazardous PEO Treatment Dehumidification of Air by the Composite Membrane Coated with Hydrophilic Polymer on Inorganic SubstrateMineralogical Characterization of Villa Reyes M?xico Kaolin for Industrial ApplicationsPerformance of a Two-Phase Carbon Dioxide-Filled ThermosyphonRefractive Index of SiO2-B2O3-Al2O3 GlassesPreparation and Characterization of KGM /TiO2 Composite MembranePreparation of the Nano-Hydroxyapatite/Chitosan/Konjac Glucomannan Composite as a Novel Degradable Drug Delivery SystemEffects of Al Addition on Mechanical Properties of Plasma Spayed Al2O3-Al Composite Coatings