Eco-Materials Processing and Design IX

<ul><li>Committees</li><li>Preface</li><li>A. Photocatalyst</li><li>Nano-Sized Nitrogen-Doped Ti-W Mixed Oxides: Preparation and Enhanced Photocatalytic Activities under Visible Light Irradiation</li><li>Treatment Performance of Photocatalysis/H₂O₂/Metal Membrane Process for Organics Removal</li><li>Test Method for Skin Damage of Titania Photocatalyst Nanoparticles <i>In Vitro</i></li><li>Surface Roughness Control of Zirconia Films Using a Novel Photoresponsive Precursor Molecule for Improving its Photocatalytic Activity </li><li>Influence of Calcination Temperature on the Microstructure of Porous TiO₂ Film </li><li>Nanocrystalline TiO₂ Coated-Fabric for UV Shielding and Anti-Bacterial Functions</li><li>Preparation of Ultrafine TiO₂ Nanofibers and their Application in Removal of NO_x in Air</li><li>Performance of Photocatalysis/Chemical Oxidants in Aqueous TiO₂ Suspensions</li><li>Removal of Refractory Organic Compounds Using Peroxy Radical and Ozone Reaction in Aqueous Solution</li><li>Physicochemical Characteristics of ZnS Immobilized on Spherical Activated Carbon for Removing HA(Humic Acid)</li><li>Characterization of Anodized TiO₂ for Hydrogen Evolution in Enzymatic PEC System </li><li>B. Nano Structured Materials </li><li>Machinability and Microstructure of SiC/h-BN Nano-Composites </li><li>Investigation on Gel Casting Preparation of Porous Si₃N₄ Ceramics through Orthogonal Experimental Design</li><li>Investigation of Mechanical Property and Thermal Shock Behavior of Machinable B₄C/BN Ceramics Composites</li><li>High Temperature Oxidation of WC-CrN Superhard Nanocomposite Film </li><li>Synthesis of MgO Thin Film Deposited on Soda Lime Glass by Sol-Gel Process</li><li>Study on the Recognition of the Registration Marks for Low-Energy Microcolumn Lithography </li><li>Properties of Nano-Hybrid Sol-Gel Coating Films Synthesized with Colloidal Silica and Organoalkoxy Silanes</li><li>Structural and Electrical Properties of Vanadium Tungsten Oxide Thin Films Grown on Pt/TiO₂/SiO₂/Si Substrates </li><li>Synthesis of Nickel Coated Gadolinia Doped Ceria Nanopowder by Microwave Radiation </li><li>Analysis of Cell Toxic Experiments in New Synthetic Compounds from Nano-Scaled Collagen</li><li>Corrosion Resistance of TiAlN/ZrN and TiCrN/ZrN Multilayers during Heat Treatment </li><li>Mechanical Performances of ZTM/SiC Nanocomposite Optimized through Composition and Microstructure Tailoring </li><li>C. Hybrid Materials</li><li>Phase Analysis in the Region Brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron Backscatter Diffraction</li><li>The Mechanical Properties of AlN/BN Laminated Ceramic Composites </li><li>Comparative Studies on Microstructure and Mechanical Properties of CrN, Cr-Mo-N and Cr-Si-N Coatings </li><li>Syntheses and Mechanical Properties of Ti-Al-Si-C-N Coatings by a Hybrid Coating System </li><li>Pressureless Brazing of Zirconia to Stainless Steel Using Active Filler Metal with TiH₂ Powder </li><li>Investigation of Cu/Al Metal Laminates Prepared by Plasma Activated Sintering (PAS) </li><li>Two-Step Planarization of ECMP and CMP for MEMS Copper Patterns</li><li>Optimum Material Design of Metal-Ceramic Hybrid Functionally Graded Composite</li><li>Vacuum Breakdown Behavior of CuWCr Composites </li><li>Experimental Analysis in Lithium Niobate CMP for Room Temperature Bonding </li><li>The Effect of Mixed Abrasive Slurry on CMP of 6H-SiC Substrate</li><li>The Effects of Various Substrate Temperature of Bi₂O₃ Buffer Layer on SBT (SrBi₂Ta₂O₉) Thin Films Deposited by R.F. Magnetron Sputtering</li><li>Oxidation Behavior and Cutting Performance between Ti_0.75-Al_0.25-N and Ti_0.69-Al_0.23-Si_0.08-N Coated Tool through Measurement of Cutting Temperature</li><li>Stress-Induced Martensitic Transformation of Metastable Ti-Nb-Ge Alloys for Biomedical Application</li><li>Dry Sliding Wear Characteristics of Ti-Nb-Si Alloys for Biomedical Application</li><li>Crystallization Kinetics for Synthesis Hyper-Structure in P₂O₅-ZnO-B₂O₃-BaO-Al₂O₃-TiO₂ Glass Ceramic Composite </li><li>Optical Property of Hybrid Material Including Crystalline in Amorphous Matrix</li><li>The Preparation and Characterization of Organic Solvent Dispersible Polyaniline Coated Titania Hybrid Nanocomposites </li><li>The Adhesion Evaluation of Thin Hard Coatings on Tool Steel with Nitride or Non-Nitride Layer Using the Scratch Test </li><li>The Electrical Properties of PLZT Thin Films on ITO Coated Glass with Various Post-Annealing Temperature </li><li>Mechanical Properties and Microstructure Observation with Grain Refinement in CuZnAl Alloy </li><li>Formation of TiO₂ Coating Layer on the Surface Treated Ti Alloys </li><li>Deposition of ISZO Films on Polymer Substrate Using Two Cathodes</li><li>Mechanical and Electrical Properties of Ga-Doped ZnO Films Deposited on Flexible Substrate by DC Magnetron Sputtering </li><li>A Study on the SiC/Al Composites Fabricated by Pressureless Infiltration</li><li>The Resistivity-Temperature Property of Transition Metal Oxide Co₃O₄ with In₂O₃ Addition</li><li>The Effect of Alloying Cu on Pitting Corrosion Resistance of Copper-Bearing Ferritic Stainless Steel </li><li>D. Recycling/Substitute of Hazardous Materials</li><li>Removal of Carbon Nanoparticle Using NO₂ Oxidation Technique</li><li>Effect of MSW Incineration Bottom Ash in Clay Based Ceramics</li><li>Manufacturing of Construction Materials from Municipal Incinerator Residue </li><li>Adsorption Behavior of Barley Straw Carbon for Chromium (VI) Ion</li><li>Gelatin-Glutaradehyde-Poly(Vinyl Alcohol) Bioadsorbent: Synthesis, Characterization and Application for Copper(II) Ion Removal from Synthetic Aqueous Solution</li><li>Photocatalytic Cr(VI) Reduction by Anodized TiO₂</li><li>Fabrication of WC and WC(Co) Codeposited Nickel Composite Coating by Electroplating Method for the Replacement of Chromium Coating</li><li>E. Eco-Materials </li><li>Oil Removal Using Diethyl Ether Extracted and Ground Kenaf Core</li><li>Properties of Permeable Concrete Substrate Having Dual Pore Structures</li><li>Fabrication of Porous ?-Tricalcium Phosphate with Collagen Composite Materials</li><li>Absorption and Preservation of Bentonite Containing Smectite</li><li>Absorption of Bentonite Compact with Absorbent Polymer</li><li>Preparation and Characteristics of Eu and Dy Doped Sr₄Al₁₄O₂₅ Phosphor</li><li>Optimization of Earth Resistance by Investigating the Surge-Wave Response </li><li>Numerical Simulation of Heat Evolution of Eco-Friendly Blended Portland Cements Using a Multi-Component Hydration Model</li><li>Numerical Simulation of Autogenous Shrinkage of Eco-Friendly Blended Portland Cements Using a Multi-Component Hydration Model</li><li>Using of Ethylene Glycol as Pore-Form Agent to Form Interconnected Mesopores in Carbonized Phenol Resin </li><li>Effect of Different Upper Side Types of Plaster Molds on the Pore Formation of Al Foams via Upward Foaming Method </li><li>Comparative Study on TiH₂ and CaCO₃ for Fabrication of Mg Alloy Foams </li><li>Anisotropic Mechanical Properties of Nickel Foams Fabricated by Powder Metallurgy</li><li>Concentration of Organic Acid from Fermented Food Wastes Using a MF/RO Process</li><li>Effect of Different Chemical and Physical Characteristic Having Lignocellulosic Fibers on Heavy Metal Ion Removal from Auqueous Solution </li><li>Fabrication of Porous Plate with Bimodal Pore Size Distribution Using Molten Slag from Incinerator </li><li>Development of A3003 Alloy Tube for Eco-Friendly Refrigerant Application</li><li>An Experimental Study of the Characteristics of Environment-Friendly Construction Materials by Recycling Sewage Sludge Ash </li><li>Charge and Discharge Properties of Hydrogen in the Alloy Hydride System with Open Cell Al Foam</li><li>Preparation and Characterization of High Compressive Strength Geopolymeric Monoliths Using Silica Waste </li><li>Development of Free Nitric acid, Non-P Desmut Solution for Surface Treatment Aluminium Alloys </li><li>Effect of Impurities on Formation of Pores in Porous Alumina during Unidirectional Solidification </li><li>Development of Inorganic Binder with MSWI Ash </li><li>Comparison of Porous Ceramic Materials with Low Thermal Expansion Coefficient Prepared with SiC and Black-Al₂O₃</li><li>Development of Porous Materials Using Sewage Sludge by Molten-Salt Method </li><li>Zeolite Synthesis Using Sewage Sludge by Molten-Salt Method</li><li>Effect of SPS on Surface Characteristics of Gas-Atomized Mg-6wt%Al-1wt%Zn Alloy by Non-Hazardous PEO Treatment </li><li>Dehumidification of Air by the Composite Membrane Coated with Hydrophilic Polymer on Inorganic Substrate</li><li>Mineralogical Characterization of Villa Reyes Mexico Kaolin for Industrial Applications</li><li>Performance of a Two-Phase Carbon Dioxide-Filled Thermosyphon</li><li>Refractive Index of SiO₂-B₂O₃-Al₂O₃ Glasses</li><li>Preparation and Characterization of KGM /TiO₂ Composite Membrane</li><li>Preparation of the Nano-Hydroxyapatite/Chitosan/Konjac Glucomannan Composite as a Novel Degradable Drug Delivery System</li><li>Effects of Al Addition on Mechanical Properties of Plasma Spayed Al₂O₃-Al Composite Coatings </li></ul>