Advanced Materials XII

New Developments in NdFeB-Based Permanent MagnetsComputational Model of Phase Transformations in Thermo-Chemical Cathodes Using Kinetic ApproachRecent Advances in Fatigue Crack GrowthViscoelastic Response of HTPB Based Solid Fuel to Horizontal and Vertical Storage Slumping Conditions and it's Affect on Service LifeHigh Temperature Oxidation Behaviour of Nickel Based Nanostructured Composite CoatingsSurface Modification and Characterization of Bulk Amorphous MaterialsStructural, Electrical and Dielectric Properties of Nanocrystalline Mg-Zn FerritesAn Inquisitive into the Indirect Measurement and Comparison of the Viscosity of Nanoconfined Polystyrene NanoparticlesEffect of Grain Size and Load Ratio on the near Threshold Stress Intensity Factor during Fatigue Crack Propagation of Dual Phase SteelCerium Doped Bismuth Based High Tc Superconductor: Synthesis and Study of Superconducting PropertiesTempering Response to Different Morphologies of Martensite in Tensile Deformation of Dual-Phase SteelEffects on Structural, Electronic Transport & Optical Properties of Doped & Undoped ZnTe Thin Films for CdTe/CdS Solar CellsThe Effect of Double Pass GMAW Process on Microstructure and Mechanical Properties of Aa 6061-T6 Joining PlatesMartensitic Transformation and Microstructural Characteristics in Copper Based Shape Memory AlloysEffect of Ageing on Mechanical and Shape Memory Properties of Ti-5Cr-4Ag AlloyA Hierarchical Approach to Purify and Functionalize Pristine Carbon NanotubesSynthesis of Single and Multi Walled Carbon Nanotubes by Improved Arc Discharge MethodEffect of Substrate Temperature on the Structural and Electrical Properties of MBE Grown ZnOSynthesis, Crystallization Behavior and Surface Modification of Ni-Cr-Si-Fe Amorphous AlloyAcoustic Properties of Ho2Si2O7 Single Crystal Investigated by Brillouin Light ScatteringLiner Material's Output Characteristics of Explosively Formed Projectiles (EFPs)Characterization of Physical Properties of Thermally Evaporated Doped CdS Thin Films for PhotovoltaicsEffect of Sintering Temperature on Structural, Electrical and Dielectric Parameters of Mn-Zn Nano FerritesSynthesis and Thermoelectric Studies in Cr Doped Cobalt Ferrites Nano ParticlesOptoelectronic Properties of Cadmium Sulfide Thin Films Deposited by Thermal Evaporation TechniqueSynthesis, Characterization and Hall Effect Measurements of Nanocrystalline ZnO Thin FilmsElectrical and Dielectric Spectroscopic Characterization of Polycrystalline Dy2Si2O7Role of Synthesis Parameters on Structural and Electrical Properties of M-Type Hexa-FerritesFailure of the Pressure Bulkhead of a Passenger Aircraft - A Case StudyEffect of Heat Treatment on Deformation Induced Martensite in Austenitic Stainless SteelMicrostructures, Electrical and Magnetic Properties of Zn Doped Co NanoferritesInvestigation of Source of N-Type Conductivity in Bulk ZnOStudy of Corrosion-Electrochemical Behavior of Aluminum-Beryllium Alloys Alloyed with Yttrium, Lanthanum and CeriumEffect of Zirconium Addition on the Grain Size and Mechanical Behavior of Aluminum Grain Refined by Titanium Plus Boron (Ti+B) in the as Cast and Cold Extruded ConditionsPreparation, Structural and Electrical Properties of Nanocrystalline Zr-Mn Cobalt-Ferrite Synthesized by the Co-Precipitation MethodStructural and Thermal Characterization of Polymorphic Er2Si2O7Laser Induced Backside Dry Etching of BK-7 and Quartz in VacuumComparative Study of Temperature Dependent Barrier Heights of Pd/ZnO Schottky Diodes Grown along Zn- and O-FacesPreparation and Characterization of Carbon Supported Nano-Nickel and its Sorption Behavior for Zinc from Aqueous SolutionsEffect of Cork Loading on Mechanical and Thermal Properties of Silica-Ethylene-Propylene-Diene Monomer CompositeAn Electrochemical Impedance Spectroscopy Study of Al-Zn and Al-Zn-Sn Alloys in Tropical SeawaterA Comparison of the Electrical and Thermal Behavior of ZrO2-Ni Interpenetrating Phase Composite Produced by Microwave and Conventional SinteringElectrical, Dielectrical and Magnetic Properties of Zr-Mn Doped Nano-FerritesIsotropic and Anisotropic Nanocrystalline NdFeB-Based Magnets Prepared by Spark Plasma Sintering and Hot DeformationSingle Step Heat Treatment Cycle for Development of Isotropic Fe-Cr-Co MagnetsInfluence of Contact Materials on Phenomena in a Short Electrical ArcAnomalous Behavior of Chemically Synthesized Magnetoplumbite Strontium Ferrite Nano ParticlesEffect of Thermal Treatments on the Structural and Optical Properties of Thermally Deposited Polycrystalline Cu Thin FilmsProficient Ni-Zn-Cr Ferrites: Synthesis and CharacterizationEffect of Sintering Temperature on Nanostructured Multiferroic BiFeO3 CeramicsEffect of Zirconium Addition on Welding of Aluminum Grain Refined by TitaniumEffect of Thermal Treatment on Nano-Crystallites and Phase Transformation of CaZrO3Thermal Barrier CoatingsImproved Hydrogen Desorption Kinetics of MgH2 Nanoparticles by Using TiC NanocatalystSoftware Development for Specific Geometry and Safe Design of Isotropic Material Multicell BeamsMaterial Selection for Design, Manufacturing and ApplicationRole of Heat Treatment in Magnetic Properties of Fe-Co-Ni-Al-Cu-Ti AlloyFailure Analysis of a Helicopter's Main Rotor BearingCombustion Characteristics of the Mustard Methyl EstersResistance Pressure Sensor Based on Ag/Cu2O-PEPC-NiPc/Al CompositeRole of Equiaxed Primary Alpha (a?) and Mechanical Properties of Ti-6Al-4V AlloyComparison of Structural Properties of Thermally Evaporated CdTe Thin Films on Different SubstratesEffect of Strain Rate on Cavity Closure during Compression between Flat Platens Using Superplastic Tin-Lead AlloySEM Examination and Analysis of the Interface Character in Surface Modified Aramid-Epoxy CompositeVariations in Structural and Electrical Properties of Ba-Hexaferrite due to Pb SubstitutionSynthesis of Phase Pure Strontium Doped Lead Zirconate Titanate Nano Crystalline Powder by Sol-Gel ApproachNon-Destructive Evaluation of Plasma Sprayed CaZrO3 Coatings by Eddy Current TechniqueEffect of Post-Deposition Annealing Treatment on the Structural, Optical and Gas Sensing Properties of TiO2 Thin FilmsCharacterization of Cold Rolled Austenitic Stainless Steel by Ultrasonic Longitudinal VelocityEffect of Vanadium Addition to Aluminum and Aluminum Grain Refined by Titanium on their Chemical Corrosion Rate in Acidic Solution, HCL, at Different TemperaturesCorrelation of Microstructures with Electrical Transport Properties in Mn Doped Co Nanoferrite ParticlesSynthesis of Laser Beam Rapidly Solidified Novel Surfaces on D2 Tool SteelInfluence of Solid Particle Size on Burning and Mechanical Properties of AP/Al/HTPB CompositesDevelopment of Fe-Cr-Co Permanent Magnets by Single Step Thermo-Magnetic TreatmentFailure Analysis of Engine BearingPiezoelectricity in 0-3 PZT-PVDF Nano Composites Prepared via a Modified Solution Casting ProcessSynthesis and AC Electrical Characterization of Co Doped Bismuth Manganite NanoparticlesEffect of Carbon Black on Curing Behavior, Mechanical Properties and Viscoelastic Behavior of Natural Sponge Rubber-Based Nano-CompositesEffect of Air Plasma Spraying Parameters on WC-Co Cermet CoatingPlasma Sprayed Alumina Coating on Ti6Al4V Alloy for Orthopaedic Implants: Microstructure and Phase AnalysisInfluence of Degree of Deformation on Anisotropy in Mechanical Properties in Wrought Magnesium Alloy ZK60Design of Axially Loaded Helical Spring Isolation SystemsComparative Performance of Locally Made and the Foreign Made Dynamic Compression PlatesInvestigation of Fiber-Reinforced Modified Epoxy Resin CompositesEffects of Sintering Temperature on Structural and Electrical Transport Properties of Zinc Ferrites Prepared by Sol-Gel RouteUse of Flexible Engineered Cementitious Composite in BuildingsMeasurement of Loose Powder DensityPermeability Measurement of some Barrier Materials as a Function of Temperature and PressureDevelopment of APDL Program for Analysis of Composite Material Multicell Beams