Advanced Materials XII

<ul><li>Preface, Committees and Sponsors</li><li>New Developments in NdFeB-Based Permanent Magnets</li><li>Computational Model of Phase Transformations in Thermo-Chemical Cathodes Using Kinetic Approach</li><li>Recent Advances in Fatigue Crack Growth</li><li>Viscoelastic Response of HTPB Based Solid Fuel to Horizontal and Vertical Storage Slumping Conditions and it's Affect on Service Life</li><li>High Temperature Oxidation Behaviour of Nickel Based Nanostructured Composite Coatings</li><li>Surface Modification and Characterization of Bulk Amorphous Materials</li><li>Structural, Electrical and Dielectric Properties of Nanocrystalline Mg-Zn Ferrites</li><li>An Inquisitive into the Indirect Measurement and Comparison of the Viscosity of Nanoconfined Polystyrene Nanoparticles</li><li>Effect of Grain Size and Load Ratio on the near Threshold Stress Intensity Factor during Fatigue Crack Propagation of Dual Phase Steel</li><li>Cerium Doped Bismuth Based High T_c Superconductor: Synthesis and Study of Superconducting Properties</li><li>Tempering Response to Different Morphologies of Martensite in Tensile Deformation of Dual-Phase Steel</li><li>Effects on Structural, Electronic Transport & Optical Properties of Doped & Undoped ZnTe Thin Films for CdTe/CdS Solar Cells</li><li>The Effect of Double Pass GMAW Process on Microstructure and Mechanical Properties of Aa 6061-T6 Joining Plates</li><li>Martensitic Transformation and Microstructural Characteristics in Copper Based Shape Memory Alloys</li><li>Effect of Ageing on Mechanical and Shape Memory Properties of Ti-5Cr-4Ag Alloy</li><li>A Hierarchical Approach to Purify and Functionalize Pristine Carbon Nanotubes</li><li>Synthesis of Single and Multi Walled Carbon Nanotubes by Improved Arc Discharge Method</li><li>Effect of Substrate Temperature on the Structural and Electrical Properties of MBE Grown ZnO</li><li>Synthesis, Crystallization Behavior and Surface Modification of Ni-Cr-Si-Fe Amorphous Alloy</li><li>Acoustic Properties of Ho₂Si₂O₇ Single Crystal Investigated by Brillouin Light Scattering</li><li>Liner Material's Output Characteristics of Explosively Formed Projectiles (EFPs)</li><li>Characterization of Physical Properties of Thermally Evaporated Doped CdS Thin Films for Photovoltaics</li><li>Effect of Sintering Temperature on Structural, Electrical and Dielectric Parameters of Mn-Zn Nano Ferrites</li><li>Synthesis and Thermoelectric Studies in Cr Doped Cobalt Ferrites Nano Particles</li><li>Optoelectronic Properties of Cadmium Sulfide Thin Films Deposited by Thermal Evaporation Technique</li><li>Synthesis, Characterization and Hall Effect Measurements of Nanocrystalline ZnO Thin Films</li><li>Electrical and Dielectric Spectroscopic Characterization of Polycrystalline Dy₂Si₂O₇</li><li>Role of Synthesis Parameters on Structural and Electrical Properties of M-Type Hexa-Ferrites</li><li>Failure of the Pressure Bulkhead of a Passenger Aircraft - A Case Study</li><li>Effect of Heat Treatment on Deformation Induced Martensite in Austenitic Stainless Steel</li><li>Microstructures, Electrical and Magnetic Properties of Zn Doped Co Nanoferrites</li><li>Investigation of Source of N-Type Conductivity in Bulk ZnO</li><li>Study of Corrosion-Electrochemical Behavior of Aluminum-Beryllium Alloys Alloyed with Yttrium, Lanthanum and Cerium</li><li>Effect of Zirconium Addition on the Grain Size and Mechanical Behavior of Aluminum Grain Refined by Titanium Plus Boron (Ti+B) in the as Cast and Cold Extruded Conditions</li><li>Preparation, Structural and Electrical Properties of Nanocrystalline Zr-Mn Cobalt-Ferrite Synthesized by the Co-Precipitation Method</li><li>Structural and Thermal Characterization of Polymorphic Er₂Si₂O₇</li><li>Laser Induced Backside Dry Etching of BK-7 and Quartz in Vacuum</li><li>Comparative Study of Temperature Dependent Barrier Heights of Pd/ZnO Schottky Diodes Grown along Zn- and O-Faces</li><li>Preparation and Characterization of Carbon Supported Nano-Nickel and its Sorption Behavior for Zinc from Aqueous Solutions</li><li>Effect of Cork Loading on Mechanical and Thermal Properties of Silica-Ethylene-Propylene-Diene Monomer Composite</li><li>An Electrochemical Impedance Spectroscopy Study of Al-Zn and Al-Zn-Sn Alloys in Tropical Seawater</li><li>A Comparison of the Electrical and Thermal Behavior of ZrO₂-Ni Interpenetrating Phase Composite Produced by Microwave and Conventional Sintering</li><li>Electrical, Dielectrical and Magnetic Properties of Zr-Mn Doped Nano-Ferrites</li><li>Isotropic and Anisotropic Nanocrystalline NdFeB-Based Magnets Prepared by Spark Plasma Sintering and Hot Deformation</li><li>Single Step Heat Treatment Cycle for Development of Isotropic Fe-Cr-Co Magnets</li><li>Influence of Contact Materials on Phenomena in a Short Electrical Arc</li><li>Anomalous Behavior of Chemically Synthesized Magnetoplumbite Strontium Ferrite Nano Particles</li><li>Effect of Thermal Treatments on the Structural and Optical Properties of Thermally Deposited Polycrystalline Cu Thin Films</li><li>Proficient Ni-Zn-Cr Ferrites: Synthesis and Characterization</li><li>Effect of Sintering Temperature on Nanostructured Multiferroic BiFeO₃ Ceramics</li><li>Effect of Zirconium Addition on Welding of Aluminum Grain Refined by Titanium</li><li>Effect of Thermal Treatment on Nano-Crystallites and Phase Transformation of CaZrO₃Thermal Barrier Coatings</li><li>Improved Hydrogen Desorption Kinetics of MgH₂ Nanoparticles by Using TiC Nanocatalyst</li><li>Software Development for Specific Geometry and Safe Design of Isotropic Material Multicell Beams</li><li>Material Selection for Design, Manufacturing and Application</li><li>Role of Heat Treatment in Magnetic Properties of Fe-Co-Ni-Al-Cu-Ti Alloy</li><li>Failure Analysis of a Helicopter's Main Rotor Bearing</li><li>Combustion Characteristics of the Mustard Methyl Esters</li><li>Resistance Pressure Sensor Based on Ag/Cu₂O-PEPC-NiPc/Al Composite</li><li>Role of Equiaxed Primary Alpha (??) and Mechanical Properties of Ti-6Al-4V Alloy</li><li>Comparison of Structural Properties of Thermally Evaporated CdTe Thin Films on Different Substrates</li><li>Effect of Strain Rate on Cavity Closure during Compression between Flat Platens Using Superplastic Tin-Lead Alloy</li><li>SEM Examination and Analysis of the Interface Character in Surface Modified Aramid-Epoxy Composite</li><li>Variations in Structural and Electrical Properties of Ba-Hexaferrite due to Pb Substitution</li><li>Synthesis of Phase Pure Strontium Doped Lead Zirconate Titanate Nano Crystalline Powder by Sol-Gel Approach</li><li>Non-Destructive Evaluation of Plasma Sprayed CaZrO₃ Coatings by Eddy Current Technique</li><li>Effect of Post-Deposition Annealing Treatment on the Structural, Optical and Gas Sensing Properties of TiO₂ Thin Films</li><li>Characterization of Cold Rolled Austenitic Stainless Steel by Ultrasonic Longitudinal Velocity</li><li>Effect of Vanadium Addition to Aluminum and Aluminum Grain Refined by Titanium on their Chemical Corrosion Rate in Acidic Solution, HCL, at Different Temperatures</li><li>Correlation of Microstructures with Electrical Transport Properties in Mn Doped Co Nanoferrite Particles</li><li>Synthesis of Laser Beam Rapidly Solidified Novel Surfaces on D2 Tool Steel</li><li>Influence of Solid Particle Size on Burning and Mechanical Properties of AP/Al/HTPB Composites</li><li>Development of Fe-Cr-Co Permanent Magnets by Single Step Thermo-Magnetic Treatment</li><li>Failure Analysis of Engine Bearing</li><li>Piezoelectricity in 0-3 PZT-PVDF Nano Composites Prepared via a Modified Solution Casting Process</li><li>Synthesis and AC Electrical Characterization of Co Doped Bismuth Manganite Nanoparticles</li><li>Effect of Carbon Black on Curing Behavior, Mechanical Properties and Viscoelastic Behavior of Natural Sponge Rubber-Based Nano-Composites</li><li>Effect of Air Plasma Spraying Parameters on WC-Co Cermet Coating</li><li>Plasma Sprayed Alumina Coating on Ti6Al4V Alloy for Orthopaedic Implants: Microstructure and Phase Analysis</li><li>Influence of Degree of Deformation on Anisotropy in Mechanical Properties in Wrought Magnesium Alloy ZK60</li><li>Design of Axially Loaded Helical Spring Isolation Systems</li><li>Comparative Performance of Locally Made and the Foreign Made Dynamic Compression Plates</li><li>Investigation of Fiber-Reinforced Modified Epoxy Resin Composites</li><li>Effects of Sintering Temperature on Structural and Electrical Transport Properties of Zinc Ferrites Prepared by Sol-Gel Route</li><li>Use of Flexible Engineered Cementitious Composite in Buildings</li><li>Measurement of Loose Powder Density</li><li>Permeability Measurement of some Barrier Materials as a Function of Temperature and Pressure</li><li>Development of APDL Program for Analysis of Composite Material Multicell Beams</li></ul>