Material Science and Engineering Technology V

Desorption Behavior of Epoxy/Amine-Coated Polyester Triangular Bar Composites Pre-Exposed to Acid EnvironmentStudy on the Mechanism of Pores Deformation in Aluminium Composites under Hot and Cold Upsetting ProcessesPreliminary Study on the Acoustical, Dielectric and Mechanical Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester CompositesTensile Properties of Unidirectional Kenaf Polypropylene Composite at Various Temperatures and OrientationsTensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid CompositeEffect of Replacing Carbon Black with Surfactant-Modified Natural Feldspar on Mechanical Properties of Natural Rubber CompositesEffect of Type of Amine Salt and Surfactant on the Water Sorption and Flexural Properties of Modified Zeolite/Polyester CompositesDevelopment, Manufacturing and Characterization of a New Composite Prepared from Cyperus corymbosus Rotth and Poly(Vinyl Chloride)Fire Retardation Mechanism of PVC Composite Filled with White Rice Husk Ash for Ceiling Board ApplicationsStudy on Utilization of Palm Frond for Wood Plastic CompositeImproving Interfacial Adhesion of Sub-Micro PA6 Composites with De-Sized Carbon FiberMorphological and Spectral Analysis of Polystyrene-Block-Polyisoprene-Poly(Butyl Acrylate) Triblock CopolymerModeling the Hardness and Mechanical Properties of Moulded Natural Rubber PadEffect of Replacing Carbon Black with Organo-Modified Bentonite and Acid-Activated Zeolite on Vulcanization Characteristics of Natural Rubber Tire TreadEpoxidation of Waste Rubber/Zeolite Powder as Potential Filler for Epoxy ResinMetal Organic Frameworks-Templated Hollow Mn2NiO4 Flower for Enhanced Supercapacitor ElectrodesReinforcement of Stereolithography Resin with Silica-Based FillersRAFT Polymerization of Dual Responsive Hyperbranched-Star Copolymers of Methacrylic Acid and Poly(Ethylene Glycol)Temperature Dependence of Degradation of Colored Oxo-Biodegradable Low-Density Polyethylene Films under Accelerated Thermal AgingConductivity Improvement of Silver Nanowire Transparent Electrodes by Surface Plasma TreatmentThermodynamics of Formaldehyde Removal by Adsorption onto Nanosilver Loaded Bamboo-Based Activated CarbonAn Experimental Evaluation of Solid Lubricant Based Nanofluids in Small Quantity Cooling and Lubrication during GrindingEffect of Acid/Fiber Ratio on Physical Properties of Cellulose Nanofibers Extracted from Cassava PulpEffects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment TemperaturePhotocatalytic Decomposition of Glycerol Solution on TiO2 Nanotube Arrays (TNTA) Doped with C and N to Produce HydrogenMolecular Oxygen Adsorbed on Gallium Doped Graphene: A First-Principles StudyThe Physical and Photocatalytic Properties of N-Doped TiO2 Polycrystalline Synthesized by a Single Step Sonochemical Method at Room TemperatureLaterally Inhomogeneous Barrier Height Analysis for Thermally Annealed CuNiTi/p-InP ContactsModified Synthetic Fibers a Treatment for Heavy Metal Removal in AqueousEffect of Degrading Transparent Oxo-Biodegradable Polyethylene Plastic Bags to Water QualityEffects of Various Pretreatment Variables on Hydrolysis of Lignocellulose to Produce Sugar in Bioethanol ProductionHeat Effects from Far-Infrared Source towards Antioxidant Activity in Aquilariasubintegra LeavesCopper-Treated Philippine Natural Zeolites for Escherichia coli InactivationMicrowave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from Orthosiphon stamineus LeavesHardness Removal from Water by Modified StarchEnzymatic Activity of Immobilized Carbonic Anhydrase onto Amberlite XAD7Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from Labisia pumilaSwelling and Crosslinked Formaldehyde Chitosan as Adsorbent for Metal Ion Cu (II)A Comparative Performance of New Materials for Carbon Dioxide Removal in Absorption ProcessAddition of Mo Zn Fe and Ag into HZSM-5 and NaZSM-5 CatalystsEffects of Alkali and Thermal Treatment on the Ti6Al4V towards Apatite Deposition in Dulbecco?s Phosphate Buffered Saline (DPBS) SolutionMechanical and Thermal Properties of Thermoplastic Film from Tacca leontopetaloides Starch Reinforced with Rice Husk BiocharPreparation and Dye Removal Properties of Hyperbranched Polymeric Ionic Liquid/Poly(Vinylidene Fluoride) Composite FilmsProperties of Composite Films from Sugarcane Bagasse, Coconut Coir, and Water Hyacinth Fibers/Poly(Vinyl Chloride)Effect of Coating Adhesion on Turmeric Essential Oil Incorporated into Chitosan-Based Edible CoatingEffect of Sintering Temperature on Zinc Substituted Calcium Phosphate CeramicsMicroscopic Methods for Characterization of Selected Surface Properties of Biodegradable, Nanofibrous Tissue Engineering ScaffoldsDevelopment of Brominated Flame Retardants (BFRs) Analysis with Liquid Chromatography-Tandem Mass Spectrometry (LC/MS/MS) in Sewage Sludge MatrixPhoton-Induced L-Shell X-Ray Production Cross Sections for Lanthanides at 59.54 keVHydrogen Bonds-Enhanced Organoclay-Free Oil Based Drilling Fluid SystemInterfacial Tension Measurement of Light Oil from Thailand to Enhance Oil Recovery for Surfactant Flooding ApplicationStudy on the Preparation and Properties of Hybrid Lubricant for Invert Emulsion Drilling FluidsThe Study of Photocatalytic Oxidation of Benzyl Alcohol with g-C3N4 under Visible Light: Effect of pH and SaltMolecular Dynamics Simulation Study of Lecithin Inhibiting Hydrate-DissociationExperimental Study on the Bundle Lithium-Ion Batteries FireThe Morphology Effect on the Selectivity of SPEEK/ENR Membranes for Direct Methanol Fuel CellOptimization of the Microstructure of Molten Carbonate Fuel Cell AnodeEffects of SPEEK/Cloisite Concentration as Electrospinning Parameter on Proton Exchange Membrane for Direct Methanol Fuel Cell ApplicationNanostructures and Properties of Vanadium Oxide Thin Film Prepared by Spray Pyrolysis MethodPhysical Properties of CdSxTe1-x Thin Films Prepared by Close Spaced Sublimation MethodInfluence of Annealing Temperature on the Properties of SnS Thin Films Prepared by Vacuum Thermal EvaporationEffect of Post-Annealing Treatment on the Structure and Luminescence Properties of AIN:Tb3+ Thin Films Prepared by Radio Frequency Magnetron SputteringGrowth Mechanism of Copper Oxide Fabricaticated by Potentiostatic Electrodeposition MethodDesign of Reservoir Recognition Technique Component - Open Porosity in Non-Polarizing ElectrodesPreparation and Properties of CaO-MgO-Al2O3-SiO2 Glass-Ceramics from Granite WastesHot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb AlloyHigh Strain Rate Compressive Behaviour of Selective Laser Melted Ti-6Al-4VStructure and Properties of CuCr0.6 Alloy after Severe Plastic DeformationInfluence of Microalloying (Including Rare-Earth Metals) on the Phase Composition and Properties of Aluminum AlloysInvestigation of Impact Behavior of TIG Welded Inconel 718 at Aircraft Engine Operating TemperaturesAnalysis of Residual Stress on FSW AA 6061 Using Hole-Drilling with ESPI for HFMI Treated ConditionImproving Mechanical Properties of Co-Cr-W Alloys by Powder MetallurgyEffect of Zr-Addition to Ti-14Mn AlloyMicrostructural Investigation and Characterization of Bulk Brass Melted by Conventional and Microwave Processing MethodsImplementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental FormingSome Studies on the Bulging Characteristics of Cold-Upset Steel PreformsMicrostructure and Wear Properties of High-Pressure Torsion Processed IronPacking Efficiency Characterization of SiC Abrasive Machining Particles for Photovoltaic Silicon Wafer SlicingLaser Melting of High Thermal Conductivity Steel (HTCS) SurfaceMaterial Removal Model of Lap Grinding for Sapphire Substrate Based on Roughness ParametersFabrication of Eco-Green Brick by Using of Vetiver Grass as Feldspar ReplacementEffect of Delaying Addition of Heat Stimulated Superplasticizer on Fresh Properties of MortarInvestigation of Polyurethane Bonding to Steel in Sandwich PanelsMechanical and Durability Properties of Concrete Using Dredged Marine SandStudy of Sawdust and Expanded Polystyrene as Cavity Filler Material on the Effect of Thermal Conductivity in Perforated Clay BrickCompressive Strength of Mortars Admixed with Wollastonite and Microsilica