Material Science and Engineering Technology V

<ul><li>Preface, Committee</li><li>Chapter 1: Composites and Polymers</li><li>Desorption Behavior of Epoxy/Amine-Coated Polyester Triangular Bar Composites Pre-Exposed to Acid Environment</li><li>Study on the Mechanism of Pores Deformation in Aluminium Composites under Hot and Cold Upsetting Processes</li><li>Preliminary Study on the Acoustical, Dielectric and Mechanical Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester Composites</li><li>Tensile Properties of Unidirectional Kenaf Polypropylene Composite at Various Temperatures and Orientations</li><li>Tensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid Composite</li><li>Effect of Replacing Carbon Black with Surfactant-Modified Natural Feldspar on Mechanical Properties of Natural Rubber Composites</li><li>Effect of Type of Amine Salt and Surfactant on the Water Sorption and Flexural Properties of Modified Zeolite/Polyester Composites</li><li>Development, Manufacturing and Characterization of a New Composite Prepared from <i>Cyperus corymbosus</i> Rotth and Poly(Vinyl Chloride)</li><li>Fire Retardation Mechanism of PVC Composite Filled with White Rice Husk Ash for Ceiling Board Applications</li><li>Study on Utilization of Palm Frond for Wood Plastic Composite</li><li>Improving Interfacial Adhesion of Sub-Micro PA6 Composites with De-Sized Carbon Fiber</li><li>Morphological and Spectral Analysis of Polystyrene-Block-Polyisoprene-Poly(Butyl Acrylate) Triblock Copolymer</li><li>Modeling the Hardness and Mechanical Properties of Moulded Natural Rubber Pad</li><li>Effect of Replacing Carbon Black with Organo-Modified Bentonite and Acid-Activated Zeolite on Vulcanization Characteristics of Natural Rubber Tire Tread</li><li>Epoxidation of Waste Rubber/Zeolite Powder as Potential Filler for Epoxy Resin</li><li>Metal Organic Frameworks-Templated Hollow Mn₂NiO₄Flower for Enhanced Supercapacitor Electrodes</li><li>Reinforcement of Stereolithography Resin with Silica-Based Fillers</li><li>RAFT Polymerization of Dual Responsive Hyperbranched-Star Copolymers of Methacrylic Acid and Poly(Ethylene Glycol)</li><li>Temperature Dependence of Degradation of Colored Oxo-Biodegradable Low-Density Polyethylene Films under Accelerated Thermal Aging</li><li>Chapter 2: Nanomaterials and Nanotechnology</li><li>Conductivity Improvement of Silver Nanowire Transparent Electrodes by Surface Plasma Treatment</li><li>Thermodynamics of Formaldehyde Removal by Adsorption onto Nanosilver Loaded Bamboo-Based Activated Carbon</li><li>An Experimental Evaluation of Solid Lubricant Based Nanofluids in Small Quantity Cooling and Lubrication during Grinding</li><li>Effect of Acid/Fiber Ratio on Physical Properties of Cellulose Nanofibers Extracted from Cassava Pulp</li><li>Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature</li><li>Photocatalytic Decomposition of Glycerol Solution on TiO₂ Nanotube Arrays (TNTA) Doped with C and N to Produce Hydrogen</li><li>Molecular Oxygen Adsorbed on Gallium Doped Graphene: A First-Principles Study</li><li>The Physical and Photocatalytic Properties of N-Doped TiO₂Polycrystalline Synthesized by a Single Step Sonochemical Method at Room Temperature</li><li>Laterally Inhomogeneous Barrier Height Analysis for Thermally Annealed CuNiTi/<i>p</i>-InP Contacts</li><li>Chapter 3: Biotechnologies, Biomaterials and Technologies in Environmental Engineering</li><li>Modified Synthetic Fibers a Treatment for Heavy Metal Removal in Aqueous</li><li>Effect of Degrading Transparent Oxo-Biodegradable Polyethylene Plastic Bags to Water Quality</li><li>Effects of Various Pretreatment Variables on Hydrolysis of Lignocellulose to Produce Sugar in Bioethanol Production</li><li>Heat Effects from Far-Infrared Source towards Antioxidant Activity in <i>Aquilaria</i><i>subintegra</i> Leaves</li><li>Copper-Treated Philippine Natural Zeolites for <i>Escherichia coli</i> Inactivation</li><li>Microwave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from <i>Orthosiphon stamineus</i> Leaves</li><li>Hardness Removal from Water by Modified Starch</li><li>Enzymatic Activity of Immobilized Carbonic Anhydrase onto Amberlite XAD7</li><li>Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from <i>Labisia pumila</i></li><li>Swelling and Crosslinked Formaldehyde Chitosan as Adsorbent for Metal Ion Cu (II)</li><li>A Comparative Performance of New Materials for Carbon Dioxide Removal in Absorption Process</li><li>Addition of Mo Zn Fe and Ag into HZSM-5 and NaZSM-5 Catalysts</li><li>Effects of Alkali and Thermal Treatment on the Ti6Al4V towards Apatite Deposition in Dulbecco's Phosphate Buffered Saline (DPBS) Solution</li><li>Mechanical and Thermal Properties of Thermoplastic Film from <i>Tacca leontopetaloides</i> Starch Reinforced with Rice Husk Biochar</li><li>Preparation and Dye Removal Properties of Hyperbranched Polymeric Ionic Liquid/Poly(Vinylidene Fluoride) Composite Films</li><li>Properties of Composite Films from Sugarcane Bagasse, Coconut Coir, and Water Hyacinth Fibers/Poly(Vinyl Chloride)</li><li>Effect of Coating Adhesion on Turmeric Essential Oil Incorporated into Chitosan-Based Edible Coating</li><li>Effect of Sintering Temperature on Zinc Substituted Calcium Phosphate Ceramics</li><li>Microscopic Methods for Characterization of Selected Surface Properties of Biodegradable, Nanofibrous Tissue Engineering Scaffolds</li><li>Chapter 4: Materials and Technologies of Chemical Engineering</li><li>Development of Brominated Flame Retardants (BFRs) Analysis with Liquid Chromatography-Tandem Mass Spectrometry (LC/MS/MS) in Sewage Sludge Matrix</li><li>Photon-Induced L-Shell X-Ray Production Cross Sections for Lanthanides at 59.54 keV</li><li>Hydrogen Bonds-Enhanced Organoclay-Free Oil Based Drilling Fluid System</li><li>Interfacial Tension Measurement of Light Oil from Thailand to Enhance Oil Recovery for Surfactant Flooding Application</li><li>Study on the Preparation and Properties of Hybrid Lubricant for Invert Emulsion Drilling Fluids</li><li>The Study of Photocatalytic Oxidation of Benzyl Alcohol with g-C₃N₄ under Visible Light: Effect of pH and Salt</li><li>Molecular Dynamics Simulation Study of Lecithin Inhibiting Hydrate-Dissociation</li><li>Chapter 5: Design and Development of Fuel Cells and Batteries</li><li>Experimental Study on the Bundle Lithium-Ion Batteries Fire</li><li>The Morphology Effect on the Selectivity of SPEEK/ENR Membranes for Direct Methanol Fuel Cell</li><li>Optimization of the Microstructure of Molten Carbonate Fuel Cell Anode</li><li>Effects of SPEEK/Cloisite Concentration as Electrospinning Parameter on Proton Exchange Membrane for Direct Methanol Fuel Cell Application</li><li>Chapter 6: Design and Fabrication of Thin Films and Ceramics</li><li>Nanostructures and Properties of Vanadium Oxide Thin Film Prepared by Spray Pyrolysis Method</li><li>Physical Properties of CdS_xTe_1-xThin Films Prepared by Close Spaced Sublimation Method</li><li>Influence of Annealing Temperature on the Properties of SnS Thin Films Prepared by Vacuum Thermal Evaporation</li><li>Effect of Post-Annealing Treatment on the Structure and Luminescence Properties of AIN:Tb³⁺ Thin Films Prepared by Radio Frequency Magnetron Sputtering</li><li>Growth Mechanism of Copper Oxide Fabricaticated by Potentiostatic Electrodeposition Method</li><li>Design of Reservoir Recognition Technique Component - Open Porosity in Non-Polarizing Electrodes</li><li>Preparation and Properties of CaO-MgO-Al₂O₃-SiO₂ Glass-Ceramics from Granite Wastes</li><li>Chapter 7: Properties of Metals and Alloys, Processing Technologies</li><li>Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy</li><li>High Strain Rate Compressive Behaviour of Selective Laser Melted Ti-6Al-4V</li><li>Structure and Properties of CuCr0.6 Alloy after Severe Plastic Deformation</li><li>Influence of Microalloying (Including Rare-Earth Metals) on the Phase Composition and Properties of Aluminum Alloys</li><li>Investigation of Impact Behavior of TIG Welded Inconel 718 at Aircraft Engine Operating Temperatures</li><li>Analysis of Residual Stress on FSW AA 6061 Using Hole-Drilling with ESPI for HFMI Treated Condition</li><li>Improving Mechanical Properties of Co-Cr-W Alloys by Powder Metallurgy</li><li>Effect of Zr-Addition to Ti-14Mn Alloy</li><li>Microstructural Investigation and Characterization of Bulk Brass Melted by Conventional and Microwave Processing Methods</li><li>Implementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental Forming</li><li>Some Studies on the Bulging Characteristics of Cold-Upset Steel Preforms</li><li>Microstructure and Wear Properties of High-Pressure Torsion Processed Iron</li><li>Packing Efficiency Characterization of SiC Abrasive Machining Particles for Photovoltaic Silicon Wafer Slicing</li><li>Laser Melting of High Thermal Conductivity Steel (HTCS) Surface</li><li>Material Removal Model of Lap Grinding for Sapphire Substrate Based on Roughness Parameters</li><li>Chapter 8: Building Materials</li><li>Fabrication of Eco-Green Brick by Using of Vetiver Grass as Feldspar Replacement</li><li>Effect of Delaying Addition of Heat Stimulated Superplasticizer on Fresh Properties of Mortar</li><li>Investigation of Polyurethane Bonding to Steel in Sandwich Panels</li><li>Mechanical and Durability Properties of Concrete Using Dredged Marine Sand</li><li>Study of Sawdust and Expanded Polystyrene as Cavity Filler Material on the Effect of Thermal Conductivity in Perforated Clay Brick</li><li>Compressive Strength of Mortars Admixed with Wollastonite and Microsilica</li></ul>