Materials Performance, Modeling and Simulation

Effect of Strontium and T6 Heat Treatment on Structure and Performance of Al-11.6Si-0.5Mg AlloyMicrostructure and Precipitates of High-Pure Ferritic Stainless Steels Stabilized by Niobium and TitaniumExperimental and Numerical Study on Dieless Bending of 2-Piece Parallel Flow Microchannel Heat ExchangerPreparation of Tungsten-Copper Composite Powder by Electroless PlatingEffect of Coil Temperature on Microstructure and Texture Evolution of an High Strength Nb-IF Steel SheetAnalysis of Density and Mechanical Properties of Iron Powder with Upper Relaxation Assist through High Velocity CompactionEffect of Addition Zr on As-Homogenization Microstructures of 5182 Aluminum AlloyResearch on Characteristics of Heat Treatment of Squeeze Cast Al-Cu-Mg AlloyEffects of SPS Pulse Current on Interface of Al90Mn9Ce1/ZrO2 Micro-Cellular Structure CompositesEffect of Process Parameters on Hydroforming of Stainless Steel Tubular Components with Rectangular SectionEffect of Annular Electromagnetic Stirring on Microstructure and Mechanical Property of 7075 Aluminium AlloyResearch on Dieless Drawing Process of Stainless Steel Tapered TubeHot Deformation Behavior of A390 Hypereutectic Al-Si AlloyNumerical Simulation of Electro-Slag Remelting Process Solidification Structure of Cr-Co-Mo-Ni Bearing SteelInfluence of Extrusion Temperature on Microstructures and Properties of Cu-17Ni-3Al-X AlloyThe Effects of Rolling Process on the Microstructure and Properties of Columnar-Grained Cu-12 Wt%Al AlloysInfluence of Different Pouring Temperature to Properties and Organization of A356 Aluminum Alloy under Specified ConditionsNumerical Simulation Analysis of Aluminium Alloy Wheels Casting Defects and Casting Process OptimizationEffect of Compound Fluxes on A-TIG Welding Joint Depth of Cu-Cr-Zr AlloyFabrication and Properties of Cu/MgB2 Composites by Vacuum SinteringResearch Progress of Cold Working Die SteelEffect of High Density Pulsing Current on Mechanical Properties of Fe-6.5wt.%Si Alloy SheetEffect of Mixing Method on Microstructure of SiCp/Al CompositesThe Intelligent Control Method of the Density of the Metal Injection Molding Billet Based on ANNStudy on the Interface Diffusion Bonding of the Copper Alloy/30CrMnSi SteelEffects of TIG Process on Corrosion Resistance of 321 Stainless Steel Welding JointMicrostructures and Mechanical Properties of Mg Alloy FSW Joint Characterized with Asymmetric Gradient in Three DimensionCryogenic Treatment of 06Cr19Ni10 Austenitic Stainless SteelMagnetic Properties and Morphology of the Cobalt Particles Prepared in Different Liquid SolventEffects of In/Ce to Sn-3.5Ag Lead-Free Solder on Microstructures and PropertiesPreparation and Mechanism of Cu/Nano-TiO2/PBO Composite Fibers by Photocatalysis Electroless PlatingThe Study on the Reducing Friction and Anti-Wear Performance of Zinc Phosphate Nanoparticles as Lubrication AdditivesFabrication of Lotus-Type Porous Silicon by Unidirectional Solidification in Pressurized Hydrogen AtmosphereThe Microstructural Evolution of AA6111 Aluminum Alloy during Homogenization TreatmentThe Surface Heat Transfer Coefficient Model of 7075 Al-Alloy Extrusion Product and its Temperature PredictionIsothermal Bainite Transformation in Aluminium Bearing TRIP SteelEffect of Cooling Paths on Microstructure and Mechanical Properties of Vanadium Bearing Microalloyed SteelThe Influence of Inhomogeneous Deformation on the Microstructures and Properties of Thick-Plate 7150 AlloyThermal and Optical Properties of High Refractive Index xNb2O5-(1-x)La2O3 Glasses Prepared by Aerodynamic Levitation MethodEffect of Heating Temperature and Heating Rate on Austenite in the Heating Process of 300M SteelThe Metal Flowing Behaviors and Die Bearing Band Optimization of a Large Al-Alloy Extrusion ProfileThe Dynamic Recrystallization Model of 7050 Al-Alloy during Hot DeformationEffect of Heat Treatment on Microstructure and Properties of Cu-3Ti-1Al AlloyEffect of Q-P-T Process on the Microstructure and Mechanical Properties of 300M SteelThe Precipitation and Strengthening Mechanism of Cu-Ni-Si-Co AlloyEnergy Saving by Applying 3000kVA Electric Arc Furnace in Fused Magnesia ProductionEffect of Partitioning Time on the Microstructure and Mechanical Properties of Q&P SteelsEffect of Different Concentrations of Sodium Silicate Impregnated on the Performance of Carbon/Copper CompositesW-Ti Alloy Prepared by Hydrogen Reduction of Nanometer WO3-TiH2 PowdersInvestigation on the Preparation and Properties of MoCu Gradient MaterialGrain Evolution Character of Discal Parts by Roll FormingInfluence of Sulfur and Manganese Contents on Texture and Fish-Scale Resistance of DC03EK Cold-Rolled Enamel SteelMicrostructure and Mechanical Properties of AZ81 Magnesium Alloy after Unequal Channel Angular PressingMicrostructure Evolution in Undercooled Ni-Si MeltEffect of Technological Parameters on Preparation of Mg-Based Foam MaterialsInfluences of High-Temperature Short-Time Endurance Performance of Heat Resistant Steel for Ultra Supercritical UnitsPreparation and Heat Treatment of Ni60-WC/Cr12MoV Bimetallic Composite MaterialsTungsten-Copper Composite Fabricated by Hot-Shock ConsolidationInvestigation of Deibinding and Sintering of 3Y-ZrO2 Gear Fabricated by Micro Powder Injection MoldingSoftening Mechanism in Heat Affected Zone of 2519 High Strength Al-Cu AlloyResearch on Preparation Technology of High Quality Diamond FilmEffects of Strain Rate on Tensile Deformation Behavior of Quenching and Partitioning SteelEffect of Composite Master Alloy on Mechanical Properties and Electrochemical Corrosion of ZL101 AlloyHeat Transfer Performance of Lotus-Type Porous Copper Micro-Channel Heat SinkEffect of Alterative and Homogenization on the Microstructure of Cu-20Ni-5Sn AlloyProperties and Fabrication of Alumina Dispersion Strengthened Copper Alloy with High Softening TemperatureMagnetic Properties for Magnetic Quantum Dot Arrays: Fast Fourier Transformation and Micromagnetism StudyAnalysis and Simulation of the UOE Pipe Production Processing by Finite Element MethodThe Kinetics of Reorientation of Multi-Variants under the Continuous Tensile Stress: Phase-Field SimulationThe Probabilistic Safety Assessment of the Rail Mounted Gantry CranesSize Dependent Mechanical Properties of Graphene Nanoribbons: Molecular Dynamics SimulationThe Effect of the Size and Electronic Factor on Occupation and Magnetic Property of Co Addition in L10 FePt AlloyFirst-Principles Study on the Thermodynamic Properties of Nb, Cr2Nb and Nb5Si3 AlloysResearch on the out of Square of H-BeamsAtomic Modeling and Simulation of AlCoCrCuFeNi Multi-Principal-Element AlloyInfluence of Deformation and Quenching Temperature on Structures and Properties of High Nitrogen Stainless Bearing SteelPrecipitate Behavior and Microstructure Evolution of ?? Phase in Ni-Al Alloys with the Internal Elastic StrainResearch on Flow Behavior of Advanced High Strength Steel at Elevated TemperatureSimulation and Technology Optimization for Rolling Web Wave of Large Size H-BeamIndenter Size Effect on the Incipient Plasticity of Al (001) SurfacePrediction and Simulation of Microstructure-Property and Residual Stress for Large Size Hot Rolled H-BeamTheoretical Calculation of Electronic Structure and Mechanical Properties of Quenched Carbon Structural SteelComputational Modeling of Sand Cementation by Bio-Mineral CaCO3Generating 2D Non-Equiaxed Initial Microstructure for Monte Carlo Simulation Using Modified Voronoi ModelA New High Order Mathematical Model for Calculating the Energy Conservation EquationOptical Properties of Heterodiamond BC3 from First-PrinciplesNumrical Simulation on Electric Field of Galvanic Corrosion for U-Nb Alloy and 45-SteelEffects of N Concentration on Electronic Structure and Optical Absorption Properties of N-Doped SrTiO3 from First PrinciplesThe Clustering of Zn6Y9 and its Predominant Role in Long Period Stacking Order Phases in Mg-Zn-Y Alloys: A First-Principles StudyDevelopment of Thermodynamic Database of Ti-V-Based Hydrogen Storage AlloysEffects of La2O3 on Microstructure and Properties of Laser Clad Fe-Based Amorphous Composite CoatingsInterfacial Behavior of Micro-Cellular Structural Al90Mn9Ce1/TiO2 Composite Prepared by Spark Plasma SinteringWear-Resistant Coatings Prepared by Combination of SHS and Lost Foam CastingFormation Sequence of Interface Intermetallic Phases of Cold Rolling Cu/Al Clad Metal Sheet in Annealing ProcessGalvanic Corrosion between Depleted Uranium and 45 SteelSurface Stability of a Biaxially Pre-Tensioned Soft Elastic Film Interacting with a ContactorPreparation of 8YSZ and Double-Ceramic-Layer La2Zr2O7/8YSZ Thermal Barrier Coatings on GH4169 Superalloy Substrates and their Static High Temperature Oxidation BehaviourStudy on the Electrolysis Expansion of Carbon Cathode in [K3AlF6/Na3AlF6]-AlF3-Al2O3 Low Temperature MeltsEffect of Deposition Temperature on the Structure and Mechanical Properties of Ti-6Al-4V FilmThe Effect of Strain on the Impedance and Surface Potential of Austenite in 304 Stainless SteelsPreparation and Characterization of the Highly Regular Nitrogen Doped Anatase TiO2 NanotubeImpact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase Field Method