Materials Performance, Modeling and Simulation

<ul><li>Preface and Organizers</li><li>Advanced Processing of Materials</li><li>Effect of Strontium and T6 Heat Treatment on Structure and Performance of Al-11.6Si-0.5Mg Alloy</li><li>Microstructure and Precipitates of High-Pure Ferritic Stainless Steels Stabilized by Niobium and Titanium</li><li>Experimental and Numerical Study on Dieless Bending of 2-Piece Parallel Flow Microchannel Heat Exchanger</li><li>Preparation of Tungsten-Copper Composite Powder by Electroless Plating</li><li>Effect of Coil Temperature on Microstructure and Texture Evolution of an High Strength Nb-IF Steel Sheet</li><li>Analysis of Density and Mechanical Properties of Iron Powder with Upper Relaxation Assist through High Velocity Compaction</li><li>Effect of Addition Zr on As-Homogenization Microstructures of 5182 Aluminum Alloy</li><li>Research on Characteristics of Heat Treatment of Squeeze Cast Al-Cu-Mg Alloy</li><li>Effects of SPS Pulse Current on Interface of Al₉₀Mn₉Ce₁/ZrO₂ Micro-Cellular Structure Composites</li><li>Effect of Process Parameters on Hydroforming of Stainless Steel Tubular Components with Rectangular Section</li><li>Effect of Annular Electromagnetic Stirring on Microstructure and Mechanical Property of 7075 Aluminium Alloy</li><li>Research on Dieless Drawing Process of Stainless Steel Tapered Tube</li><li>Hot Deformation Behavior of A390 Hypereutectic Al-Si Alloy</li><li>Numerical Simulation of Electro-Slag Remelting Process Solidification Structure of Cr-Co-Mo-Ni Bearing Steel</li><li>Influence of Extrusion Temperature on Microstructures and Properties of Cu-17Ni-3Al-X Alloy</li><li>The Effects of Rolling Process on the Microstructure and Properties of Columnar-Grained Cu-12 Wt%Al Alloys</li><li>Influence of Different Pouring Temperature to Properties and Organization of A356 Aluminum Alloy under Specified Conditions</li><li>Numerical Simulation Analysis of Aluminium Alloy Wheels Casting Defects and Casting Process Optimization</li><li>Effect of Compound Fluxes on A-TIG Welding Joint Depth of Cu-Cr-Zr Alloy</li><li>Fabrication and Properties of Cu/MgB₂ Composites by Vacuum Sintering</li><li>Research Progress of Cold Working Die Steel</li><li>Effect of High Density Pulsing Current on Mechanical Properties of Fe-6.5wt.%Si Alloy Sheet</li><li>Effect of Mixing Method on Microstructure of SiCp/Al Composites</li><li>The Intelligent Control Method of the Density of the Metal Injection Molding Billet Based on ANN</li><li>Study on the Interface Diffusion Bonding of the Copper Alloy/30CrMnSi Steel</li><li>Effects of TIG Process on Corrosion Resistance of 321 Stainless Steel Welding Joint</li><li>Microstructures and Mechanical Properties of Mg Alloy FSW Joint Characterized with Asymmetric Gradient in Three Dimension</li><li>Cryogenic Treatment of 06Cr19Ni10 Austenitic Stainless Steel</li><li>Magnetic Properties and Morphology of the Cobalt Particles Prepared in Different Liquid Solvent</li><li>Effects of In/Ce to Sn-3.5Ag Lead-Free Solder on Microstructures and Properties</li><li>Preparation and Mechanism of Cu/Nano-TiO₂/PBO Composite Fibers by Photocatalysis Electroless Plating</li><li>The Study on the Reducing Friction and Anti-Wear Performance of Zinc Phosphate Nanoparticles as Lubrication Additives</li><li>Fabrication of Lotus-Type Porous Silicon by Unidirectional Solidification in Pressurized Hydrogen Atmosphere</li><li>The Microstructural Evolution of AA6111 Aluminum Alloy during Homogenization Treatment</li><li>The Surface Heat Transfer Coefficient Model of 7075 Al-Alloy Extrusion Product and its Temperature Prediction</li><li>Isothermal Bainite Transformation in Aluminium Bearing TRIP Steel</li><li>Effect of Cooling Paths on Microstructure and Mechanical Properties of Vanadium Bearing Microalloyed Steel</li><li>The Influence of Inhomogeneous Deformation on the Microstructures and Properties of Thick-Plate 7150 Alloy</li><li>Thermal and Optical Properties of High Refractive Index xNb₂O₅-(1-x)La₂O₃ Glasses Prepared by Aerodynamic Levitation Method</li><li>Effect of Heating Temperature and Heating Rate on Austenite in the Heating Process of 300M Steel</li><li>The Metal Flowing Behaviors and Die Bearing Band Optimization of a Large Al-Alloy Extrusion Profile</li><li>The Dynamic Recrystallization Model of 7050 Al-Alloy during Hot Deformation</li><li>Effect of Heat Treatment on Microstructure and Properties of Cu-3Ti-1Al Alloy</li><li>Effect of Q-P-T Process on the Microstructure and Mechanical Properties of 300M Steel</li><li>The Precipitation and Strengthening Mechanism of Cu-Ni-Si-Co Alloy</li><li>Energy Saving by Applying 3000kVA Electric Arc Furnace in Fused Magnesia Production</li><li>Effect of Partitioning Time on the Microstructure and Mechanical Properties of Q&P Steels</li><li>Effect of Different Concentrations of Sodium Silicate Impregnated on the Performance of Carbon/Copper Composites</li><li>W-Ti Alloy Prepared by Hydrogen Reduction of Nanometer WO₃-TiH₂ Powders</li><li>Investigation on the Preparation and Properties of MoCu Gradient Material</li><li>Grain Evolution Character of Discal Parts by Roll Forming</li><li>Influence of Sulfur and Manganese Contents on Texture and Fish-Scale Resistance of DC03EK Cold-Rolled Enamel Steel</li><li>Microstructure and Mechanical Properties of AZ81 Magnesium Alloy after Unequal Channel Angular Pressing</li><li>Microstructure Evolution in Undercooled Ni-Si Melt</li><li>Effect of Technological Parameters on Preparation of Mg-Based Foam Materials</li><li>Influences of High-Temperature Short-Time Endurance Performance of Heat Resistant Steel for Ultra Supercritical Units</li><li>Preparation and Heat Treatment of Ni60-WC/Cr12MoV Bimetallic Composite Materials</li><li>Tungsten-Copper Composite Fabricated by Hot-Shock Consolidation</li><li>Investigation of Deibinding and Sintering of 3Y-ZrO₂ Gear Fabricated by Micro Powder Injection Molding</li><li>Softening Mechanism in Heat Affected Zone of 2519 High Strength Al-Cu Alloy</li><li>Research on Preparation Technology of High Quality Diamond Film</li><li>Effects of Strain Rate on Tensile Deformation Behavior of Quenching and Partitioning Steel</li><li>Effect of Composite Master Alloy on Mechanical Properties and Electrochemical Corrosion of ZL101 Alloy</li><li>Heat Transfer Performance of Lotus-Type Porous Copper Micro-Channel Heat Sink</li><li>Effect of Alterative and Homogenization on the Microstructure of Cu-20Ni-5Sn Alloy</li><li>Properties and Fabrication of Alumina Dispersion Strengthened Copper Alloy with High Softening Temperature</li><li>Materials Modeling and Simulation</li><li>Magnetic Properties for Magnetic Quantum Dot Arrays: Fast Fourier Transformation and Micromagnetism Study</li><li>Analysis and Simulation of the UOE Pipe Production Processing by Finite Element Method</li><li>The Kinetics of Reorientation of Multi-Variants under the Continuous Tensile Stress: Phase-Field Simulation</li><li>The Probabilistic Safety Assessment of the Rail Mounted Gantry Cranes</li><li>Size Dependent Mechanical Properties of Graphene Nanoribbons: Molecular Dynamics Simulation</li><li>The Effect of the Size and Electronic Factor on Occupation and Magnetic Property of Co Addition in L10 FePt Alloy</li><li>First-Principles Study on the Thermodynamic Properties of Nb, Cr₂Nb and Nb₅Si₃ Alloys</li><li>Research on the out of Square of H-Beams</li><li>Atomic Modeling and Simulation of AlCoCrCuFeNi Multi-Principal-Element Alloy</li><li>Influence of Deformation and Quenching Temperature on Structures and Properties of High Nitrogen Stainless Bearing Steel</li><li>Precipitate Behavior and Microstructure Evolution of ?' Phase in Ni-Al Alloys with the Internal Elastic Strain</li><li>Research on Flow Behavior of Advanced High Strength Steel at Elevated Temperature</li><li>Simulation and Technology Optimization for Rolling Web Wave of Large Size H-Beam</li><li>Indenter Size Effect on the Incipient Plasticity of Al (001) Surface</li><li>Prediction and Simulation of Microstructure-Property and Residual Stress for Large Size Hot Rolled H-Beam</li><li>Theoretical Calculation of Electronic Structure and Mechanical Properties of Quenched Carbon Structural Steel</li><li>Computational Modeling of Sand Cementation by Bio-Mineral CaCO₃</li><li>Generating 2D Non-Equiaxed Initial Microstructure for Monte Carlo Simulation Using Modified Voronoi Model</li><li>A New High Order Mathematical Model for Calculating the Energy Conservation Equation</li><li>Optical Properties of Heterodiamond BC₃ from First-Principles</li><li>Numrical Simulation on Electric Field of Galvanic Corrosion for U-Nb Alloy and 45-Steel</li><li>Effects of N Concentration on Electronic Structure and Optical Absorption Properties of N-Doped SrTiO₃ from First Principles</li><li>The Clustering of Zn6Y9 and its Predominant Role in Long Period Stacking Order Phases in Mg-Zn-Y Alloys: A First-Principles Study</li><li>Development of Thermodynamic Database of Ti-V-Based Hydrogen Storage Alloys</li><li>Materials Surface and Interface</li><li>Effects of La₂O₃ on Microstructure and Properties of Laser Clad Fe-Based Amorphous Composite Coatings</li><li>Interfacial Behavior of Micro-Cellular Structural Al₉₀Mn₉Ce₁/TiO₂ Composite Prepared by Spark Plasma Sintering</li><li>Wear-Resistant Coatings Prepared by Combination of SHS and Lost Foam Casting</li><li>Formation Sequence of Interface Intermetallic Phases of Cold Rolling Cu/Al Clad Metal Sheet in Annealing Process</li><li>Galvanic Corrosion between Depleted Uranium and 45 Steel</li><li>Surface Stability of a Biaxially Pre-Tensioned Soft Elastic Film Interacting with a Contactor</li><li>Preparation of 8YSZ and Double-Ceramic-Layer La₂Zr₂O₇/8YSZ Thermal Barrier Coatings on GH4169 Superalloy Substrates and their Static High Temperature Oxidation Behaviour</li><li>Study on the Electrolysis Expansion of Carbon Cathode in [K₃AlF₆/Na₃AlF₆]-AlF₃-Al₂O₃ Low Temperature Melts</li><li>Effect of Deposition Temperature on the Structure and Mechanical Properties of Ti-6Al-4V Film</li><li>The Effect of Strain on the Impedance and Surface Potential of Austenite in 304 Stainless Steels</li><li>Preparation and Characterization of the Highly Regular Nitrogen Doped Anatase TiO₂Nanotube</li><li>Impact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase Field Method</li></ul>