Ceramic and Metal Matrix Composites

Laminates for Very High Temperature Creep ResistanceCeramic Fibre Development and CharacterisationInterface Materials for Damage-Tolerant Oxide CompositesStructure and Stability of Synthetic Interphases in CMCsDebond Crack Roughness, Interface Properties and Fiber Coating Design in Ceramic CompositesDevelopment of Ceramic Matrix Composites and the Meaning of MicrocracksNovel Reaction-Based Processing of Co-Continuous Ceramic-Metal CompositesThe Effect of Interfacial Characteristics on the Mechanical Performance of Particulate, Fibrous and Layered Metal Matrix Composites - A Review of some Recent WorkProperties of Continuous Fibre Reinforced Al- and Mg-Matrix Composites Produced by Gas Pressure InfiltrationMicrostructural Optimization of Discontinuously-Reinforced Metal-Matrix CompositesUltra-High Strength In Situ Composites Formed by Large Plastic Straining: Structure and Mechanical Properties ModellingFabrication of CMCs and MMCs Using Novel ProcessesStatus and Prospects for Metal Matrix Composites in JapanThe Application of CMCs in High Integrity Gas Turbine EnginesProperties of Amorphous SIBNC-Ceramic FibresThermal Stability of a Silicon Nitride Based FiberThe Growth of Alumina/YAG Eutectic Fibres by the Laser-Heated Floating Zone ProcessOxidation Behaviour of a SiC Based FiberGrain Growth in Alumina Polycrystalline Fibres During NiAl/Al2O3 Composite ProcessingInfluence of the Pyrolytic Carbon Fibre Coating on the Strength of Textron SiC Fibre in an Aluminium Matrix CompositeProcessing and Properties of an Oxide/Oxide CompositeHot Isostatically Pressed Silicon Carbide Fibre/Mullite CompositesDensification of Si3N4/Si3N4-Fibre CompositesProcessing and Evaluation of RBSN Composite Containing SiC FilamentsThe Fabrication, Microstructure and Fracture Behaviour of Unidirectional Carbon Fibre Reinforced C/SiC Dual Matrix CompositesFabrication and Properties of Fiber- and Particulate-Reinforced SiC Matrix Composites Obtained with (A)HPCS as the Matrix SourcePreparation and Characterization of SiC/C/SiC Composites by Hybrid Wet/Vapour ProcessingReinfiltration Processes for Polymer Derived Fiber Reinforced CeramicsFibre Reinforced Silicon Carbide: Effect of Densification Method and ParametersSi-C-O Fibre-Reinforced Ceramic Matrix Composites: Processing by Tape Casting and PropertiesIn-Situ Joined CMC ComponentsOn the Formation of Aluminium Carbide During Al/C-Composite ProductionCarbon Fibre Reinforced Copper Matrix Composites: Processing Routes and PropertiesManufacture of Hoop Reinforced Ti-MMC Rings by Spray/Wind ProcessBonding of SiC Fibre Reinforced Ti-6Al-4V MMC Sheet by Resistance HeatingModelling Consolidation of Ti-6Al-4V / SiC Matrix-Coated Fibre Metal Matrix CompositesThermodynamic and Experimental Modeling of Interfacial Reactivity in Metal Matrix CompositesThe Production of Aligned Short Fibre Ceramic Matrix Composites Using a Twin Rolling MillDensification and Microstructural Evolution in a Reactive Silicon Nitride/Alumina Platelet SystemMechanosynthesis and Consolidation of Nanocrystalline VSi2/SiC CompositeFabrication and Properties of Silicon Reinforced Titanium Nitride CompositeMicrostructure and Properties of 3Y-TZP-5WT% SiC CompositesCeramic and Ceramic Matrix Composites Based on Clinker Portland: SinterabilityTitanium-Based Composites Produced by Powder MetallurgyMicrostructure and Mechanical Properties of in Situ Ti/TiB MMCs Produced by a Blended Elemental Powder Metallurgy MethodCeramic-Metal Composite Formation by Reactive Metal PenetrationStrengthening Porous Ceramics by Molten Metal InfiltrationEffect of Iron Addition on the Mechanical Properties of Al2O3-NiAl CMMCsEffect of Particle Size on the Mechanical Properties of SiC Particulate Reinforced Aluminium Alloy AA6061Effect of Alloying Additions on Threshold Pressure for Infiltration and Porosity of Aluminium-Based Melt Infiltrated Silicon Carbide Powder CompactsA New Production Technology for Discontinuously Reinforced Al-SiC CompositesEffects of Pre-Compaction Annealing on Mechanical Properties of SiCp/Al CompositesMicrostructure-Properties Relationship of AS9U3/SiCp Composites Formed by Sand and Permanent Mold CastingInfluence of Mg and Stirring on the Strength of an Aluminium Matrix Composite Obtained by CompocastingBehavior of Ceramic Particles at Solid/Liquid Interface During Solidification of Metal Matrix CompositesA New Metal Matrix Composite: Al-AlN from Partially Nitrided Aluminum PowdersCold Plastic Formability of Aluminium-Based MMCsAssessment of the Forging Conditions of 6061/Al2O3/10p Using Processing Maps and Stability CriteriaHigh Speed Steel Sludge Waste as a Starting Material for Wear Resistance ComponentsPreparation and Characterization of SiC/SiC Microcomposites with Composition Graded C(B) InterphasesZirconia Interface Layers Applied to Single Crystal Alumina Fibres by PVD and CVDLaser Based Coating of Carbon Fibres for Manufacturing CMCSilicon Carbide Laminates with Carbon Interlayers by Electrophoretic DepositionNanostructure and Mechanical Properties of Interlayers in Fibre Reinforced CompositesInterphase in Composite Materials1D SiCf-YMAS Glass-Ceramic Composites: Microstructure, Interfaces and Creep BehaviourInterfacial Micromechanical Characterisation of a Ceramic Matrix CompositeSiC/SiC Interface Characterisation Using Nanoindentation TechniquesPush-Out Tests on Small Fibres and Interfacial Properties of a Fibre-Reinforced Ceramic Matrix Composite (SiCf/SiC)Interfacial Characterisation of MMCs and CMCs Using a SEM-Pushout TechniqueA Comprehensive Approach to Understanding the Influence of the Fiber/Matrix Interface on the Properties of SiC Fiber/Ti-Alloy CompositesProcessing-Related Interface Properties in Titanium Metal Matrix CompositesStudy of Push-Out Micromechanical Test: Response of SCS-6/Ti-6242 CompositeThe Effect of Interfacial Strength on the Response of Ti MMCs to Single Fibre Push-Out and Transverse Tensile TestingInterfacial Studies in Titanium Aluminide/SiCf CompositesAssessment and Control of Surface Reactions of Carbon Fibres in Light Weight Metal Matrix CompositesInfluence of Metal-Ceramic Interfaces on the Behaviour of Metal Matrix Composites and their JointsInterface Analysis on Diffusion Bonded Bimetallic Composites. Part I: Extended Solid SolubilityInterface Analysis on Diffusion Bonded Bimetallic Composites. Part II: Formation of IntermetallicsFirst Matrix Cracking Behavior in Fiber Reinforced Ceramic CompositesA Quantitative Mesoscale Characterization of the Mechanical Behavior of Ceramic Matrix CompositesHigh Strain-Rate and High Temperature Tensile Behaviour of CAS/SiCExperimental Technique for High Temperature and High Strain Rate Testing of CMCsFatigue and Friction Heating in Ceramic Matrix CompositesMechanical Properties of Hi-Nicalon Fibre-Reinforced Silicon Nitride Matrix CompositesMechanical Properties of Ceramic-Matrix Composites for Aeroengine ApplicationsCrack Growth in the 90? Plies and Creep of 2D SiCf-MLAS CompositesMicrostructure of Cf-SiC CompositesDamage and Creep Mechanisms for a 2D SiCf Experimental Composite MaterialMaterial Testing for Multiaxial Macroscopic Modelling of Ceramic Matrix CompositesBending Test for CMC's Toughness TestingLocal Mechanical Characterisation of the Hi-Nicalon Fibre Reinforced a - Si3N4 Ceramic Matrix Composite using Microindentation TestsMechanical Behaviour of Fibre-Reinforced Aluminium Alloy Plate and TubeFibre Damage in Silicon Carbide Reinforced Aluminium Alloy in Relation to Internal StressesDeformation and Failure of Monofilament-Reinforced Titanium under Axial Compressive LoadingProperties and Damage Mechanism in Three Classes of Titanium Composite MatricesMeasurement of Thermal Residual Stresses in Continuous Fibre CompositesDeformation of Continuous Carbon Fibre Reinforced Mg-Alloys by Thermally Induced StressesAnalysis of the Mechanical Behaviour of Bimetallic Composites under Uniaxial TensionMicrostructure and Properties of MoSi2-SiC and MoSi2-Si3N4 CompositesThe Role of Platelet Orientation on the Creep Behaviour of Al2O3/SiC CompositesEvaluation of R-Curve Behavior from Indented Strength in SiC Particle-Dispersed Al2O3 CompositeGrowth of Small Surface Indentation Cracks in Alumina and Zirconia Toughened AluminaMechanical Properties of Newly Developed TiB2 Based CermetsInfluence of Microstructure on Mechanical Properties of Hypereutectic Al-Si AlloysThe Effect of Particle Clustering on the Deformation and Failure of Al-Si Reinforced with SiC Particles: A Quantitative StudyP/M Aluminum Composite Reinforced with Ni3AlThe Effect of Clustering on Damage Formation in Particulate Reinforced MMCs Deformed in CompressionDamage Nucleation and Growth in Particle Reinforced Aluminium Matrix CompositesSuperplastic Deformation of the 2009-15%SiCw CompositeStructure and Texture Evolution of the Metal Matrix Composite PM2014 Al-20%Al2O3 during Superplastic DeformationOn the Structure and Strength of Severe Strained Metal Matrix Composite Al-30%SiCwMechanical and Microstructural Characterization of Al-SiC Composite Material Obtained by Dynamic CompactionThe Effects of SiCp Clusters and Porosity on the Mechanical Properties of PM Al Matrix CompositesEffect of Thermal Cycling on the Damping Behaviour of Mg Matrix CompositesDislocation Generation in Mg Matrix Composites due to Thermal CyclingWear Behavior of Copper Matrix CompositesWear and Mechanical Behaviour of PM High Speed Steels with Carbide ReinforcementInfluence of Phase Morphology and Deformation Mode on the Behaviour during Hot Working of a Two-Ductile Phase CompositeStudy of the Role of the Interface Coherence on the Hot Deformation Behaviour of Duplex Stainless SteelsTensile Fracture of Brittle Matrix Composites Reinforced with Continuous FibresAn Explicit Behavioural Damage Model for the Design of Components in Ceramic Matrix CompositesComparison between Experimental Stiffness Changes and Crack-Thickness-Dependent Predictions on a 1D SiC-SiC CompositeInterface Oxidation and Stress-Rupture of NicalonTM/SiC CFCCs at Intermediate TemperaturesStrain Redistribution around Holes and Notches in Fiber-Reinforced Cross-Woven Brittle Matrix CompositesModelling of Matrix Cracking in Fibre-Reinforced CeramicsDamage Evolution in a Continuous Fibre Reinforced CMC: Measurements and ModellingThermal Stress in Cylinders Made of Composite MaterialsA Three-Dimensional Modeling of Transverse Matrix Cracking in Laminated CompositesThe Contribution of Bridging Ligament Rupture to Energy Absorption during Fracture of Metal-Ceramic LaminatesSimulation and Assessment of Crack Behaviour in Discontinuously Reinforced Composite MaterialsCreep of a Metal Matrix Composite with or without Diffusion and Sliding on Matrix/Reinforcement Interfaces2-Dimensional Simulation of Crack Propagation in Al2O3 Matrix Composites Dispersed with SiC ParticlesThe Stress-Strain Relationship in Al356/SiC Particulate CompositesModelling of Damage in Particulate Metal Matrix CompositesCyclic Behavior of Metal-Matrix Composites: An Experimental and Theoretical InvestigationInvestigation of Residual Stress Induced Crack Closure and its Effects on Fatigue in Metal Matrix CompositesA Numerical Study of Effect of Grain Boundaries on Elastic and Plastic Properties in Nanocomposite MaterialsFunctionally Graded Material Properties for Disks and RotorsA Microstructural Approach to the Effective Transport Properties of MMCs and CMCsNumerical Simulation of Plane Strain Compression Tests of a Bimetallic CompositeThermodynamic Modelling and Experimental Studies in the Design of Integrated Oxidation Protection Systems for Ceramic Matrix CompositesThe Use of Finite Element Analysis in the Design of Integrated Oxidation Protection Systems for Ceramic Matrix CompositesThe Influence of Heat Treatment on the Tensile Strength of Single Fibre Composites (SiC Fibre / Titanium Alloy)The Effect of W-Core/SiC Reaction on the Strength of SiC Fibers in SiC/Ti-Alloy CompositesStudy of the Thermal Treatment of an Alumina Short Fibre Reinforced Aluminium CompositeApplications of CMCs to Turbojet Engines: Overview of the SEP ExperienceProduction of MMC-Wearparts