Ceramic and Metal Matrix Composites

<ul><li>FOREWORD</li><li>Laminates for Very High Temperature Creep Resistance</li><li>Ceramic Fibre Development and Characterisation</li><li>Interface Materials for Damage-Tolerant Oxide Composites</li><li>Structure and Stability of Synthetic Interphases in CMCs</li><li>Debond Crack Roughness, Interface Properties and Fiber Coating Design in Ceramic Composites</li><li>Development of Ceramic Matrix Composites and the Meaning of Microcracks</li><li>Novel Reaction-Based Processing of Co-Continuous Ceramic-Metal Composites</li><li>The Effect of Interfacial Characteristics on the Mechanical Performance of Particulate, Fibrous and Layered Metal Matrix Composites - A Review of some Recent Work</li><li>Properties of Continuous Fibre Reinforced Al- and Mg-Matrix Composites Produced by Gas Pressure Infiltration</li><li>Microstructural Optimization of Discontinuously-Reinforced Metal-Matrix Composites</li><li>Ultra-High Strength In Situ Composites Formed by Large Plastic Straining: Structure and Mechanical Properties Modelling</li><li>Fabrication of CMCs and MMCs Using Novel Processes</li><li>Status and Prospects for Metal Matrix Composites in Japan</li><li>The Application of CMCs in High Integrity Gas Turbine Engines</li><li>Properties of Amorphous SIBNC-Ceramic Fibres</li><li>Thermal Stability of a Silicon Nitride Based Fiber</li><li>The Growth of Alumina/YAG Eutectic Fibres by the Laser-Heated Floating Zone Process</li><li>Oxidation Behaviour of a SiC Based Fiber</li><li>Grain Growth in Alumina Polycrystalline Fibres During NiAl/Al₂O₃ Composite Processing</li><li>Influence of the Pyrolytic Carbon Fibre Coating on the Strength of Textron SiC Fibre in an Aluminium Matrix Composite</li><li>Processing and Properties of an Oxide/Oxide Composite</li><li>Hot Isostatically Pressed Silicon Carbide Fibre/Mullite Composites</li><li>Densification of Si₃N₄/Si₃N₄-Fibre Composites</li><li>Processing and Evaluation of RBSN Composite Containing SiC Filaments</li><li>The Fabrication, Microstructure and Fracture Behaviour of Unidirectional Carbon Fibre Reinforced C/SiC Dual Matrix Composites</li><li>Fabrication and Properties of Fiber- and Particulate-Reinforced SiC Matrix Composites Obtained with (A)HPCS as the Matrix Source</li><li>Preparation and Characterization of SiC/C/SiC Composites by Hybrid Wet/Vapour Processing</li><li>Reinfiltration Processes for Polymer Derived Fiber Reinforced Ceramics</li><li>Fibre Reinforced Silicon Carbide: Effect of Densification Method and Parameters</li><li>Si-C-O Fibre-Reinforced Ceramic Matrix Composites: Processing by Tape Casting and Properties</li><li>In-Situ Joined CMC Components</li><li>On the Formation of Aluminium Carbide During Al/C-Composite Production</li><li>Carbon Fibre Reinforced Copper Matrix Composites: Processing Routes and Properties</li><li>Manufacture of Hoop Reinforced Ti-MMC Rings by Spray/Wind Process</li><li>Bonding of SiC Fibre Reinforced Ti-6Al-4V MMC Sheet by Resistance Heating</li><li>Modelling Consolidation of Ti-6Al-4V / SiC Matrix-Coated Fibre Metal Matrix Composites</li><li>Thermodynamic and Experimental Modeling of Interfacial Reactivity in Metal Matrix Composites</li><li>The Production of Aligned Short Fibre Ceramic Matrix Composites Using a Twin Rolling Mill</li><li>Densification and Microstructural Evolution in a Reactive Silicon Nitride/Alumina Platelet System</li><li>Mechanosynthesis and Consolidation of Nanocrystalline VSi₂/SiC Composite</li><li>Fabrication and Properties of Silicon Reinforced Titanium Nitride Composite</li><li>Microstructure and Properties of 3Y-TZP-5WT% SiC Composites</li><li>Ceramic and Ceramic Matrix Composites Based on Clinker Portland: Sinterability</li><li>Titanium-Based Composites Produced by Powder Metallurgy</li><li>Microstructure and Mechanical Properties of in Situ Ti/TiB MMCs Produced by a Blended Elemental Powder Metallurgy Method</li><li>Ceramic-Metal Composite Formation by Reactive Metal Penetration</li><li>Strengthening Porous Ceramics by Molten Metal Infiltration</li><li>Effect of Iron Addition on the Mechanical Properties of Al₂O₃-NiAl CMMCs</li><li>Effect of Particle Size on the Mechanical Properties of SiC Particulate Reinforced Aluminium Alloy AA6061</li><li>Effect of Alloying Additions on Threshold Pressure for Infiltration and Porosity of Aluminium-Based Melt Infiltrated Silicon Carbide Powder Compacts</li><li>A New Production Technology for Discontinuously Reinforced Al-SiC Composites</li><li>Effects of Pre-Compaction Annealing on Mechanical Properties of SiC_p/Al Composites</li><li>Microstructure-Properties Relationship of AS9U3/SiCp Composites Formed by Sand and Permanent Mold Casting</li><li>Influence of Mg and Stirring on the Strength of an Aluminium Matrix Composite Obtained by Compocasting</li><li>Behavior of Ceramic Particles at Solid/Liquid Interface During Solidification of Metal Matrix Composites</li><li>A New Metal Matrix Composite: Al-AlN from Partially Nitrided Aluminum Powders</li><li>Cold Plastic Formability of Aluminium-Based MMCs</li><li>Assessment of the Forging Conditions of 6061/Al₂O₃/10p Using Processing Maps and Stability Criteria</li><li>High Speed Steel Sludge Waste as a Starting Material for Wear Resistance Components</li><li>Preparation and Characterization of SiC/SiC Microcomposites with Composition Graded C(B) Interphases</li><li>Zirconia Interface Layers Applied to Single Crystal Alumina Fibres by PVD and CVD</li><li>Laser Based Coating of Carbon Fibres for Manufacturing CMC</li><li>Silicon Carbide Laminates with Carbon Interlayers by Electrophoretic Deposition</li><li>Nanostructure and Mechanical Properties of Interlayers in Fibre Reinforced Composites</li><li>Interphase in Composite Materials</li><li>1D SiC_f-YMAS Glass-Ceramic Composites: Microstructure, Interfaces and Creep Behaviour</li><li>Interfacial Micromechanical Characterisation of a Ceramic Matrix Composite</li><li>SiC/SiC Interface Characterisation Using Nanoindentation Techniques</li><li>Push-Out Tests on Small Fibres and Interfacial Properties of a Fibre-Reinforced Ceramic Matrix Composite (SiC_f/SiC)</li><li>Interfacial Characterisation of MMCs and CMCs Using a SEM-Pushout Technique</li><li>A Comprehensive Approach to Understanding the Influence of the Fiber/Matrix Interface on the Properties of SiC Fiber/Ti-Alloy Composites</li><li>Processing-Related Interface Properties in Titanium Metal Matrix Composites</li><li>Study of Push-Out Micromechanical Test: Response of SCS-6/Ti-6242 Composite</li><li>The Effect of Interfacial Strength on the Response of Ti MMCs to Single Fibre Push-Out and Transverse Tensile Testing</li><li>Interfacial Studies in Titanium Aluminide/SiC_f Composites</li><li>Assessment and Control of Surface Reactions of Carbon Fibres in Light Weight Metal Matrix Composites</li><li>Influence of Metal-Ceramic Interfaces on the Behaviour of Metal Matrix Composites and their Joints</li><li>Interface Analysis on Diffusion Bonded Bimetallic Composites. Part I: Extended Solid Solubility</li><li>Interface Analysis on Diffusion Bonded Bimetallic Composites. Part II: Formation of Intermetallics</li><li>First Matrix Cracking Behavior in Fiber Reinforced Ceramic Composites</li><li>A Quantitative Mesoscale Characterization of the Mechanical Behavior of Ceramic Matrix Composites</li><li>High Strain-Rate and High Temperature Tensile Behaviour of CAS/SiC</li><li>Experimental Technique for High Temperature and High Strain Rate Testing of CMCs</li><li>Fatigue and Friction Heating in Ceramic Matrix Composites</li><li>Mechanical Properties of Hi-Nicalon Fibre-Reinforced Silicon Nitride Matrix Composites</li><li>Mechanical Properties of Ceramic-Matrix Composites for Aeroengine Applications</li><li>Crack Growth in the 90 degrees Plies and Creep of 2D SiC_f-MLAS Composites</li><li>Microstructure of C_f-SiC Composites</li><li>Damage and Creep Mechanisms for a 2D SiC_f Experimental Composite Material</li><li>Material Testing for Multiaxial Macroscopic Modelling of Ceramic Matrix Composites</li><li>Bending Test for CMC's Toughness Testing</li><li>Local Mechanical Characterisation of the Hi-Nicalon Fibre Reinforced ? - Si₃N₄ Ceramic Matrix Composite using Microindentation Tests</li><li>Mechanical Behaviour of Fibre-Reinforced Aluminium Alloy Plate and Tube</li><li>Fibre Damage in Silicon Carbide Reinforced Aluminium Alloy in Relation to Internal Stresses</li><li>Deformation and Failure of Monofilament-Reinforced Titanium under Axial Compressive Loading</li><li>Properties and Damage Mechanism in Three Classes of Titanium Composite Matrices</li><li>Measurement of Thermal Residual Stresses in Continuous Fibre Composites</li><li>Deformation of Continuous Carbon Fibre Reinforced Mg-Alloys by Thermally Induced Stresses</li><li>Analysis of the Mechanical Behaviour of Bimetallic Composites under Uniaxial Tension</li><li>Microstructure and Properties of MoSi₂-SiC and MoSi₂-Si₃N₄ Composites</li><li>The Role of Platelet Orientation on the Creep Behaviour of Al₂O₃/SiC Composites</li><li>Evaluation of R-Curve Behavior from Indented Strength in SiC Particle-Dispersed Al₂O₃ Composite</li><li>Growth of Small Surface Indentation Cracks in Alumina and Zirconia Toughened Alumina</li><li>Mechanical Properties of Newly Developed TiB₂ Based Cermets</li><li>Influence of Microstructure on Mechanical Properties of Hypereutectic Al-Si Alloys</li><li>The Effect of Particle Clustering on the Deformation and Failure of Al-Si Reinforced with SiC Particles: A Quantitative Study</li><li>P/M Aluminum Composite Reinforced with Ni₃Al</li><li>The Effect of Clustering on Damage Formation in Particulate Reinforced MMCs Deformed in Compression</li><li>Damage Nucleation and Growth in Particle Reinforced Aluminium Matrix Composites</li><li>Superplastic Deformation of the 2009-15%SiC_w Composite</li><li>Structure and Texture Evolution of the Metal Matrix Composite PM2014 Al-20%Al₂O₃ during Superplastic Deformation</li><li>On the Structure and Strength of Severe Strained Metal Matrix Composite Al-30%SiC_w</li><li>Mechanical and Microstructural Characterization of Al-SiC Composite Material Obtained by Dynamic Compaction</li><li>The Effects of SiC_p Clusters and Porosity on the Mechanical Properties of PM Al Matrix Composites</li><li>Effect of Thermal Cycling on the Damping Behaviour of Mg Matrix Composites</li><li>Dislocation Generation in Mg Matrix Composites due to Thermal Cycling</li><li>Wear Behavior of Copper Matrix Composites</li><li>Wear and Mechanical Behaviour of PM High Speed Steels with Carbide Reinforcement</li><li>Influence of Phase Morphology and Deformation Mode on the Behaviour during Hot Working of a Two-Ductile Phase Composite</li><li>Study of the Role of the Interface Coherence on the Hot Deformation Behaviour of Duplex Stainless Steels</li><li>Tensile Fracture of Brittle Matrix Composites Reinforced with Continuous Fibres</li><li>An Explicit Behavioural Damage Model for the Design of Components in Ceramic Matrix Composites</li><li>Comparison between Experimental Stiffness Changes and Crack-Thickness-Dependent Predictions on a 1D SiC-SiC Composite</li><li>Interface Oxidation and Stress-Rupture of Nicalon^TM/SiC CFCCs at Intermediate Temperatures</li><li>Strain Redistribution around Holes and Notches in Fiber-Reinforced Cross-Woven Brittle Matrix Composites</li><li>Modelling of Matrix Cracking in Fibre-Reinforced Ceramics</li><li>Damage Evolution in a Continuous Fibre Reinforced CMC: Measurements and Modelling</li><li>Thermal Stress in Cylinders Made of Composite Materials</li><li>A Three-Dimensional Modeling of Transverse Matrix Cracking in Laminated Composites</li><li>The Contribution of Bridging Ligament Rupture to Energy Absorption during Fracture of Metal-Ceramic Laminates</li><li>Simulation and Assessment of Crack Behaviour in Discontinuously Reinforced Composite Materials</li><li>Creep of a Metal Matrix Composite with or without Diffusion and Sliding on Matrix/Reinforcement Interfaces</li><li>2-Dimensional Simulation of Crack Propagation in Al₂O₃ Matrix Composites Dispersed with SiC Particles</li><li>The Stress-Strain Relationship in Al356/SiC Particulate Composites</li><li>Modelling of Damage in Particulate Metal Matrix Composites</li><li>Cyclic Behavior of Metal-Matrix Composites: An Experimental and Theoretical Investigation</li><li>Investigation of Residual Stress Induced Crack Closure and its Effects on Fatigue in Metal Matrix Composites</li><li>A Numerical Study of Effect of Grain Boundaries on Elastic and Plastic Properties in Nanocomposite Materials</li><li>Functionally Graded Material Properties for Disks and Rotors</li><li>A Microstructural Approach to the Effective Transport Properties of MMCs and CMCs</li><li>Numerical Simulation of Plane Strain Compression Tests of a Bimetallic Composite</li><li>Thermodynamic Modelling and Experimental Studies in the Design of Integrated Oxidation Protection Systems for Ceramic Matrix Composites</li><li>The Use of Finite Element Analysis in the Design of Integrated Oxidation Protection Systems for Ceramic Matrix Composites</li><li>The Influence of Heat Treatment on the Tensile Strength of Single Fibre Composites (SiC Fibre / Titanium Alloy)</li><li>The Effect of W-Core/SiC Reaction on the Strength of SiC Fibers in SiC/Ti-Alloy Composites</li><li>Study of the Thermal Treatment of an Alumina Short Fibre Reinforced Aluminium Composite</li><li>Applications of CMCs to Turbojet Engines: Overview of the SEP Experience</li><li>Production of MMC-Wearparts</li></ul>