Proceedings of the Conference on the Rehabilitation and Reconstruction of Buildings (CRRB 2014)

Application of Colored Impregnating Glazes on Wood and Color Changes due to Artificial AgingResearch of Fire-Retardant Properties of Timber Constructions, Protected Geocement-Based Coating, after their OperationHeat-Reflecting Geocement Based Coatings Containing Perlite for Fire Protection of TimberMineralization Influence on the Strength Parameter of Solid WoodReconstruction of Historical Timber Roofs at Z?ehus?ice CastleWooden Facade with Bonded Joints - Experimental TestDetermination of Compressive Strength of Cement and Polymer-Modified Cement Pastes with PozzolansDevelopment of Thermal Insulation, Capillary Active Plasters Suitable for Historical BuildingsFormation of Efflorescence on the Surface of Construction Products in the Process of their Operation
In Situ Applicability of Selected Nanotextiles on Surfaces of Historic PlastersRemediation of Old Sandstone Structures via Hydroinsulating Injection GelsThe Effect of the Flood in 2002 on Microflora of the Sandstone Blocks of Charles Bridge in PragueA Survey of Historic Galleries in the Area of the Prague CastleDrying Technologies in Masonry StructuresPossibilities of Hydrophobization of Masonry Construction for High Risk Flood AreasProtecting the Brickworks against Technical SeismicitySpecial Mortars for Repair Masonry: The Problem of the OptimizationThe Application of Carbon Composites in the Rehabilitation of Historic VaultsDetermining the Presence of the Corrosion Inhibitors Based on Amines in Hardened MortarsDevelopment of Repair Mortars Based on Alkali Activated Materials for Application in Chemically Aggressive SurroundingsFine Grain Portland Cement Concrete with Complex Nanodisperse Admixture for Structure RehabilitatingInfluence of Temperature on Structure Formation Processes Geocements for Rehabilitation of ConcreteReconstruction of the Municipal Bath HouseShielding Silicate Composition of Increased Durability for Repair and RehabilitationSpecial Repair Materials and Influence of Aggressive Environment on their PropertiesThe Suitability of Sealants for Use with Concrete StructuresDevelopment of Lightweight Repair Materials Applicable to Re-Profiling to the Lightweight ConcreteComparison of Standardized Test Methods for Determining the Permeability of the Surface Layer of ConcreteEnhancing the Wood Glue Bond Using Cellulose Modified EpoxyExperimental Comparison of Air Pore Content of Concrete with Different Dosage of Cement by Microscopic AnalysisExperimental Determination of Innovative Plaster Moisture ExpansionInfluence of Firing Temperature on the Quality of Fly Ash BodyInvestigating Interior Changes in Historical Building by Computational Modeling and Determination Critical Places for Structural ConservationLong-Term Durability of Modified Wood-Polymer Composite to Alternate the Solid Wood External ApplicationMicroscopic Analysis of Degradation of Polymer Fibers Subjected to Aggressive EnvironmentNon-Destructive Defectoscopy of Building Structures by Lock-In ThermographyNon-Destructive Defectoscopy of Building Structures by Pulsed ThermographySelection of Alternative Additives and their Influence on High-Temperature Resistance of Repair MortarsSingle-Sided Nuclear Magnetic Resonance as a Non-Invasive Tool to Evaluate Sprayed Polymer ConcreteStorage Properties of Water-Solube Salts in Bastion Historical BrickTermographical Measurement of the Surface Temperature and Emissivity of Glossy Materials Using the Method of Four PointsThe Effect of Long Term Storage on Properties and Stability of Dry MixtureThe Thermographic Measuring of the Surface Temperature of the Peripheral Wall after Removing a Technical Device for Elimination of Reflected RadiationThermally-Technical Comparing of Traditional Double Timber Window and EurowindowThermotechnical Calculation of Air Cavities by Rehabilitation of Wet BrickworksUse of Glassy Slag from Biomass Combustion in the Building Industry ? Coarse AggregateUse of Separated Dust from the Formatting and Grinding Cement-Bonded Chipboards to Modify their CompositionUtilization of Liquefying Additives in Clay Fly Ash Grouting MixturesVerification of Applicability of Alternate Sources of Heat for Determination of the Surface Temperature and Emissivity of Glossy MaterialsVerification of Applicability of Thermographical Measuring of the Surface Temperature and the Influence of Emissivity of Glossy Materials while Eliminating the Reflected Radiation Using a Metal ShieldComparison of Two Medieval Trusses from the Viewpoint of Geometric and Static AnalysisStatistical Simulation of Accidental Loads in the Problems of Constructional MechanicsFactors Affecting the Accuracy of Computations of Historic StructuresFlexural Buckling of Columns Strengthened under LoadInsufficient Maintenance an Achilles Heel of the Broumov Group of ChurchesLongitudinal Shear Analysis of Composite Slabs with Prepressed EmbossmentsNumerical Investigation of Reinforcing a Masonry Column with Fiber Reinforced Strain Hardening Cementitious CompositeThe Corner Radius Influence on the Deformation Behavior of Brick Pillars Strengthened by CFRP ConfinementThe Shear Strength of Epoxy Adhesive Used for Chemical Anchors