Proceedings of the Conference on the Rehabilitation and Reconstruction of Buildings (CRRB 2014)

Preface and Committees
Chapter 1: Protection and Remediation of Wood Structures
Application of Colored Impregnating Glazes on Wood and Color Changes due to Artificial Aging
Research of Fire-Retardant Properties of Timber Constructions, Protected Geocement-Based Coating, after their Operation
Heat-Reflecting Geocement Based Coatings Containing Perlite for Fire Protection of Timber
Mineralization Influence on the Strength Parameter of Solid Wood
Reconstruction of Historical Timber Roofs at Z?ehus?ice Castle
Wooden Facade with Bonded Joints - Experimental Test
Chapter 2: Surface Treatment
Determination of Compressive Strength of Cement and Polymer-Modified Cement Pastes with Pozzolans
Development of Thermal Insulation, Capillary Active Plasters Suitable for Historical Buildings
Formation of Efflorescence on the Surface of Construction Products in the Process of their Operation

In Situ Applicability of Selected Nanotextiles on Surfaces of Historic Plasters
Chapter 3: Restoration of Stone
Remediation of Old Sandstone Structures via Hydroinsulating Injection Gels
The Effect of the Flood in 2002 on Microflora of the Sandstone Blocks of Charles Bridge in Prague
Chapter 4: Redevelopment of Masonry
A Survey of Historic Galleries in the Area of the Prague Castle
Drying Technologies in Masonry Structures
Possibilities of Hydrophobization of Masonry Construction for High Risk Flood Areas
Protecting the Brickworks against Technical Seismicity
Special Mortars for Repair Masonry: The Problem of the Optimization
The Application of Carbon Composites in the Rehabilitation of Historic Vaults
Chapter 5: Redevelopment of Concrete Structures
Determining the Presence of the Corrosion Inhibitors Based on Amines in Hardened Mortars
Development of Repair Mortars Based on Alkali Activated Materials for Application in Chemically Aggressive Surroundings
Fine Grain Portland Cement Concrete with Complex Nanodisperse Admixture for Structure Rehabilitating
Influence of Temperature on Structure Formation Processes Geocements for Rehabilitation of Concrete
Reconstruction of the Municipal Bath House
Shielding Silicate Composition of Increased Durability for Repair and Rehabilitation
Special Repair Materials and Influence of Aggressive Environment on their Properties
The Suitability of Sealants for Use with Concrete Structures
Development of Lightweight Repair Materials Applicable to Re-Profiling to the Lightweight Concrete
Chapter 6: Materials Properties and Measurements in Building
Comparison of Standardized Test Methods for Determining the Permeability of the Surface Layer of Concrete
Enhancing the Wood Glue Bond Using Cellulose Modified Epoxy
Experimental Comparison of Air Pore Content of Concrete with Different Dosage of Cement by Microscopic Analysis
Experimental Determination of Innovative Plaster Moisture Expansion
Influence of Firing Temperature on the Quality of Fly Ash Body
Investigating Interior Changes in Historical Building by Computational Modeling and Determination Critical Places for Structural Conservation
Long-Term Durability of Modified Wood-Polymer Composite to Alternate the Solid Wood External Application
Microscopic Analysis of Degradation of Polymer Fibers Subjected to Aggressive Environment
Non-Destructive Defectoscopy of Building Structures by Lock-In Thermography
Non-Destructive Defectoscopy of Building Structures by Pulsed Thermography
Selection of Alternative Additives and their Influence on High-Temperature Resistance of Repair Mortars
Single-Sided Nuclear Magnetic Resonance as a Non-Invasive Tool to Evaluate Sprayed Polymer Concrete
Storage Properties of Water-Solube Salts in Bastion Historical Brick
Termographical Measurement of the Surface Temperature and Emissivity of Glossy Materials Using the Method of Four Points
The Effect of Long Term Storage on Properties and Stability of Dry Mixture
The Thermographic Measuring of the Surface Temperature of the Peripheral Wall after Removing a Technical Device for Elimination of Reflected Radiation
Thermally-Technical Comparing of Traditional Double Timber Window and Eurowindow
Thermotechnical Calculation of Air Cavities by Rehabilitation of Wet Brickworks
Use of Glassy Slag from Biomass Combustion in the Building Industry - Coarse Aggregate
Use of Separated Dust from the Formatting and Grinding Cement-Bonded Chipboards to Modify their Composition
Utilization of Liquefying Additives in Clay Fly Ash Grouting Mixtures
Verification of Applicability of Alternate Sources of Heat for Determination of the Surface Temperature and Emissivity of Glossy Materials
Verification of Applicability of Thermographical Measuring of the Surface Temperature and the Influence of Emissivity of Glossy Materials while Eliminating the Reflected Radiation Using a Metal Shield
Chapter 7: Static and Dynamic Analysis of Buildings and Constructions
Comparison of Two Medieval Trusses from the Viewpoint of Geometric and Static Analysis
Statistical Simulation of Accidental Loads in the Problems of Constructional Mechanics
Factors Affecting the Accuracy of Computations of Historic Structures
Flexural Buckling of Columns Strengthened under Load
Insufficient Maintenance an Achilles Heel of the Broumov Group of Churches
Longitudinal Shear Analysis of Composite Slabs with Prepressed Embossments
Numerical Investigation of Reinforcing a Masonry Column with Fiber Reinforced Strain Hardening Cementitious Composite
The Corner Radius Influence on the Deformation Behavior of Brick Pillars Strengthened by CFRP Confinement
The Shear Strength of Epoxy Adhesive Used for Chemical Anchors