Advanced Materials and Processing

Sticking Mechanisms Occurring during Hot Rolling of Ferritic Stainless SteelsSound Radiation Characteristics for Structural Damage IdentificationOptimization Results of High Strength Steel Production ProcessMetal Injection Molding of Nickel-Free Austenitic Stainless-Steels I-Manufacturing ProcessMetal Injection Molding Method of Ni-Free Austenitic Stainless Steel II - Microstructure and Mechanical PropertiesAqueous Corrosion Characteristics of Iron AluminidesContinuous Cooling Transformation Behavior of High Strength Low-Alloyed Cold Rolled Sheet Steel Study of High Temperature Wear Resistance of Hot Work Steel for Magnesium Alloy Die CastingDry Sliding Wear Mechanisms of the High Nitrogen Austenitic 18Cr-18Mn-2Mo-0.9N Steel at Different Applied LoadsFluid-Structure Coupled Analyses of Composite Wind Turbine Blades Cementite Decomposition of Pearlitic Steels during Cold DrawingThe Texture Evolution of Dual Phase Steel SheetsEffects of Finishing Rolling Temperature on the Microstructural Behavior for Fe-0.1C Steel as a Function of Niobium ContentPlastic Deformation Behavior of Micro-Alloyed Cold Forging SteelAbnormal Grain Growth of Fe-3%Si Steel Approached by Solid-State Wetting MechanismAnalysis on Void Closure Behavior during Hot Open Die ForgingFIB and TEM Studies on the Bainitic Microstructure in Low Carbon HSLA SteelsThe Potentiality of Micro-Scaled Multi-Filament Wire Forming Using Repetitive Hydrostatic Extrusion ProcessMechanical Behaviors of Mg-6%Al-0.2%Mn Based Casting AlloysProcessing and Tensile Property of Nano Dispersed Al-Fe-(Mo, V, Zr) Bulk AlloyEnhanced Formability of AZ31 Magnesium Alloy Sheet Processed by Equal Channel Angular Rolling and Annealing TreatmentThe Effect of Alloying Elements on the c/a Ratio of Magnesium Binary AlloysForging Process Design of Al Rotating Arm Holder by FE AnalysisEffects of Heat Treatments on Microstructure of AM50 Magnesium AlloyHomogeneity of Grain Refinement of Aluminum Alloy with Compressive Torsion ProcessingEffect of Alloying Elements on Mechanical Properties for A356 Casting AlloyResearch and Development of Mg-Al-Sr AlloysPreparation of Mg-Sr Alloy Using Electrochemical ReductionRelationship between Tensile Deformation and Crystallographic Orientation of Grains in the Balanced Al-Mg2 Si AlloysRelationship between Tensile Deformation and Crystallographic Orientation of Grains in Al-Mg-Si Alloys with CuInfluence of Compressive Torsion Processing Temperature on Microstructure Refinement and Property of Aluminum AlloyHeat Resistance of Mg-Nd Based Casting Alloys Containing Gadolinium and YttriumEffect of Ca and Sr Content on Elevated Temperatures Mechanical Properties of a Cast AZ91 Magnesium AlloyMechanical Properties of Twin Roll Cast AZ91 Magnesium Alloy at Room TemperatureInfluence of Initial Texture on Twin Formation and Plastic Deformation of Rolled AZ31 Mg AlloyMicrostructure and Dynamic Ultra-Micro Hardness of the As-Cast and Extruded Mg-Al-Ca-Sm Alloys HRTEM Observation of the Age Hardening Precipitates in Mg-Zn AlloyContinuous Rheological Forming of A6061 Wrought Aluminum Alloy by Using Helical Shape Stirrer and its Thixoforging ProcessEffect of Heat Treatment on Microstructures and Properties of Mg-9Gd-4Y-0.3Zr AlloyTitanium Hydriding and Consolidation for Recycling of Titanium Tuning ChipInfluence of Microstructure Change on the Superplastic Properties of Ti3Al Base AlloyThermodynamic Analysis of Nb-Cr Powders of Mechanical AlloyingAttempt to Control Spatial Distribution of Nano-Gold Particles Using Nanoporous Surfaces of FeAl Single CrystalEffect of Heat Treatment Conditions on Microstructure and Fracture Toughness of a Cast Ti-Al AlloyInterfacial Characteristics of Iron Aluminides Intermetallic Layers on Al-Coated Steel SheetCrystal Structure and Thermoelectric Properties of ReSi1.75 Based Alloys Effect of Texture on Deformation Behavior of AZ31 Mg AlloyFirst Principles Calculations of Thermodynamic Quantities and Phase Diagrams of High Temperature BCC Ta-W and Mo-Ta AlloysMechanical Properties According to Heat Treatment for Gas Turbine Blade MaterialEffect of Creep Deformation on the Crystallographic Orientation Distribution in Ni Base SuperalloyEffect of Applied External Stress on Hydrogen Desorption from Metal HydridesElastic Properties of L10-Ordered Single CrystalsMicrostructure Evolution during Lithiation and Delithiation of Ni3Sn2 Anode for Lithium Secondary BatteriesCrystal Structure Variation of Ru2Si3 Upon Alloying with MnCreep Deformation and Microstructure of Alloy 617 Foil at High TemperatureFabrication of Textured SrBi2Nb2O9 Ceramics by Templated Grain GrowthStudy on the Properties of Doped La in BaBi4Ti4O15 CeramicCharacterization of Bismuth Titanate PowdersIn Situ Synthesis of TiB2-TiCx Ceramic Matrix Composites by Hot Isostatic PressingPreparations and Characterizations of Perovskite PMN Ceramics by Using a One-Step Calcination MethodCorrosion Behavior of Si3N4 Ceramics under High-Temperature and High-Pressure Water ConditionElectromechanical Properties of NKN-5LT Multilayer ActuatorH2/CO2 Gas Separation Characteristic of Zeolite Membrane at High TemperatureHydrogen Separation Characteristics of SiC Nanoporous Membrane at High TemperatureElectrochemical Properties of Cathode for Solid Oxide Fuel Cell with Gd-Doped Ceria ElectrolyteFabrication of Porous Alumina Ceramics by Spark Plasma Sintering MethodDynamic Thermo-Mechanical Properties of Chemically Surface Modified MWCNTs Reinforced Polymeric Composites Fabrication of Carbon Nanotubes Reinforced Polyethylene Fibers by Melt Spinning: Process Optimization and Mechanical Strength Characterization Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron CompositesSpectral Element Modeling for Elastic Two-Layer BeamsProperties of CB/Rubber Composites Filled by Carbon Black Used as Catalysts for Hydrocarbon DecompositionElectromagnetic Interference Shielding Properties of Carbon Nanotubes Reinforced CompositesA Study on Fatigue Properties of a TiNi/Al Shape Memory AlloyMicrostructure and Superconductive Property of the Extruded MgB2/Al Composite MaterialsNumerical Simulations for Uniaxial Ratcheting of SiCP/6061Al Composites Concerning Particulate ArrangementFabrication of Oxide Ceramics Composite by Reactive Infiltration ProcessEffect of Powder Blending Ratio on Synthesis of TiB2 Particles by Al-Ti-B Combustion ReactionDevelopment of Hybrid FRP-Concrete Composite Compression MembersEffect of Phosphorus Doping into the Silicon as an Anode Material for Lithium Secondary BatteriesA Study on the Design Curves for Pultruded Composite ColumnsStructural Behavior of Polymer Mortar GFRP Composite PipePhysical Characteristic of Ready Mixed Concrete with Different Replacement Ratio of Recycled AggregateEvaluation of the Influence of Additives on the Mechanical Properties and Photo-Stability of Glass Fiber Reinforced Epoxy Pipes Using Central Composite DesignMicrostructure, Hardness, and Wear Resistance of Powder-Injection-Molded Products of Fe-Based Metamorphic Powders Fabrication of Sandwich Structure with Superplastic Forming Process from Diffusion Bonded Ti-6Al-4V SheetsPreparation and Characterization of Tungsten Heavy Alloy Feedstock for Metal Injection MoldingThe Effect of Isothermal Forging Process Parameters on the Microstructure and the Properties of TA15 Near a Titanium AlloyTemperature Dependent Microstructure and Mechanical Behavior in AZ31 Alloy Processed by an Asymmetric RollingResearch on Horizontal Electromagnetic Continuous Casting of Sn-P Bronze StripsEffects of Temperature and Strain Rate on Compressive Mechanical Properties of Ultrafine-Grained CP TitaniumRecrystallization Characteristics of Ti-50.9at%Ni Alloy Processed by Equal Channel Angular ExtrusionExperimental Study of Springback in Draw Bend Test of AZ31B Magnesium Alloy SheetTexture and Formability of Frictionally Rolled AA 1050 Aluminum Alloy SheetsThe Study of Residual Stresses for Roller Hemmed Aluminum AlloysFormability and Mechanical Property of Aluminum Sheets Locally Surface-Modified by the Concept of Surface Friction JoiningEvolution of Microstructure and Texture of Pure Al Single Crystal Having {112} Orientation during Severe Plastic DeformationCharacterization of Mg-Al Sheet Clad Materials Fabricated by Hot RollingMechanical Properties of Ultra-Fine Grained Fe-Cr-Ni Alloy Fabricated by ARB Extrudability and Bonding Strength of Copper Clad Aluminum Alloy Composites Produced by Indirect Extrusion ProcessEffects of Microstructure on Mechanical Properties of HRS Processed SUS316L Stainless Steel Analysis of Surface Roughness of Immersion Sn Plating Film via Micro Etch Process Ring-Rolling Process for Manufacturing Ti-6Al-4V Plane and Profiled Ring-ProductsDynamic Recrystallization during Hot Extrusion in Mg-3Al-0.1Y AlloyWarm Forging Characteristics of AZ31 AlloyLow-Pressure Preheating Combustion Synthesis of Silicon NitrideImproved Density Distribution in Powder Metallurgy Parts with Filtering MethodsDynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 AlloysStudy on Automated Scrap-Sorting by an Image Processing TechnologyMicrowave Assisted Esterification of Waste Cotton Fabrics for Biodegradation Films PreparationInfluence of Annealing Atmosphere on the Mechanical and Wear Properties of Free-Cutting Phosphor Bronze AlloyGrain Refinement of Mg-Y-Zn Alloy by Friction Stir Processing Mechanical Milling of Prealloyed Cu-Cr Powders Prepared by Gas Atomization An Activity Model of N and V in Fe-C-V-N Molten MetalOptimization of Laser-Arc Interspacing Distance during CO2 Laser-GMA Hybrid Welding by Using High-Speed Imaging Mechanical Properties and Microstructure of Strip Casted Ag-27%Cu-25%Zn-3%Sn Brazing Alloy Micro-Structural Evolution of AlCu5MnCdVA Cast Aluminum Alloy by Semi-Solid Isothermal Annealing ProcessA Study of Electroslag Welding Process for Special Welding Joint with Thick PlateSintering Mechanism of Composite Ag Nanoparticles and its Application to Bonding Process-Effects of Ag2CO3 Contents on Bondability to Cu-Studies for the Influences of Welding Parameters of GMA Welded 600MPa Grade TRIP SteelEffects of the Process Parameters on Beads by Plasma Arc Welding of the Membrane for LNG Ships The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel Characteristics of SnOx-ZnO Composite Film on Poly Ethylene Terephalate (PET) Substrate Prepared by ECR-MOCVDThermodynamic Calculation of Alpha-Case Formation in Titanium AlloysFunctions and Morphology of Metal Lead Addition to Ancient Chinese BronzesIn Situ Combustion Synthesis of Ti-Al Intermetallic Compounds in Al Alloy Casting ProcessPermanent Mold Casting Practice and Microstructure and Mechanical Properties of Thin-Sectioned ADI CastingEffect of Additive Powder on Microstructural Evolution in the Wide-Gap Brazed Region by In Situ High Temperature ESEMA Study on the Welding Characteristics of Dissimilar Metal Using a High Power CW Nd:YAG Laser Rheocast of Al-Si-Mg Alloy Containing 1Mass% IronImprovement of the Accuracy of High Temperature Slab Weight in Continuous Casting Surface Roughness of Cu-Be Alloy (C17200) Rod Alloy Produced by Horizontal Type Continuous Casting ProcessEffects of Electric Pulse on Solidification Structure of KS282 AlloyFatigue Crack Characteristics of Friction Stir Welded Aluminum Alloy JointsAlignment of Primary Phase of a Binary Alloy during SolidificationMicrostructure and Properties of Cu-3.2Ni-0.75Si-0.3Zn Alloy for Lead FramePreparation of CaAl2O4: Eu2+ Long Persistent Blue PhosphorLarge Isothermal Magnetic Entropy Change after Hydrogen Absorption into La0.5Pr0.5(Fe0.88Si0.12)13Exchange Bias Field Change of FeMn-NiFe Films by He Ion Irradiation Using DuoPIGatron SourceElectrodeposited Nickel Nanowire ArreyEffect of Continuous Casting Parameters on Microstructure and Texture of Gold Bonding Wire for Semiconductor PackagingFabrication of Ta-Al-N Thin Films and its Cu Diffusion on Barrier PropertiesSynthesis and Growth Mechanism of ZnO Nanoneedles Using Thermal Oxidation Upon a Plated Zn Nanocrystalline LayerSolventless Synthesis of Bi2S3 Nanowires and their Application to Solar CellsThe Improvement of Permeability and Strength in Soft Magnetic Composites Motor Core Using Spark Plasma Sintering ProcessNanocrystalline Diamond Film Produced by Argon Addition in the CH4-H2 Microwave CVD PlasmasImproving the Properties of Sapphire by CoatingsDirected Crystallization of Amorphous Silicon Deposits on Glass SubstratesRecovery of Structural and Luminescent Properties in Zinc-Implanted ZnO Films Visible-Light Photodegradation of Rhodamine B on Carbon Doped Titanium Oxide Thin Film Prepared by Atmospheric MOCVDEffect of Plating Condition on the Mechanical Properties and Residual Stress of Electroplated Copper FilmCharacterization of (Ti, Al) N Films Synthesized by Arc Ion PlatingLow-Temperature Deposition of Amorphous Carbon Films for Surface Passivation of Carbon-Doped Silicon OxidePreparation and Characterization of Doped Nanometer TiO2Effect of Residual Stress on P Doped Nano-Crystalline Silicon Deposited by HWCVD FilmsMOCVD Growth of SiC Nanowires Aiming at the Control of their ShapeFabrication of OTFT Array with Coated Thin Film Dielectric and Printed Electrodes by Using Microcontact PrintingSynthesis and Characterization of Y3Al5O12 NanocrystalsPreparation of Nano-Particles of Metal Oxides via a Novel Solid-Liquid Mechanochemical Reaction TechnologyCrystal Growth in Amorphous Binary Alloys of Zr-Ni SystemEffect of Magnetic Field on Crystallization of Fe-Based Metallic GlassMicrostructure and Optical Properties of Fe-Doped SnO2 Nanoparticles Synthesized by Hydrothermal MethodStructural Defects and Changes in Al-Pd-Fe Crystalline ApproximantFabrication of Homogeneous Bulk Nanocrystalline Ni-W Alloys by an Electroforming ProcessBulk Mechanical Alloying of Al/Fe Multilayer by Accumulative Roll-Bonding ProcessStructural and Mechanical Behaviors of Partially Devitrified Ti-Based Bulk Metallic Glass Synthesis Behavior of La0.7Ca0.3MnO3 by Hydrothermal MethodMelting Liquid Joint Method of Ti(Cu)-Base Bulk Metallic Glassy AlloyY-Shaped Carbon Nanowires Obtained from Ethanol Flames and their Growth MechanismComparison between Tribological Characteristics of Al-Cu-Fe-B Quasicrystalline and Mo CoatingsUpsetting of Ultrafine-Grained Bulk Al-Mg Alloy Consolidated by Hydrostatic ExtrusionGlass Transition within the Cluster Variation ApproximationCarbon Nanotubes Obtained by ECC Technique with Cobalt Salt as Catalyst PrecursorSynthesis of Carbon Nanofibers by Ethanol Catalytic Combustion TechniqueThe Influence of Catalyst Nature on the Morphology of Multi-Directionally Grown Carbon NanofibersSynthesis of Zr-Based Glassy Alloy Foams Magnetic and Mechanical Properties of Fe-Co-B-Si-Nb-M (M = Al, V, Mo,) Bulk Metallic GlassesFine Crystalline Phase Dispersion in Zr-Based Bulk Metallic Glass by Laser IrradiationHigh-Field Maxwell Stress Effect of Dielectric Actuator Based on Segmented PolyurethaneTopology Optimization of Three-Dimensional Biodegradable Polymer Multi-Layer Microstructure for Implantable Drug Controlled ReleaseEvaluation of BAp Orientation Using Mouse Models for Osteoporosis (OPG-KO) and Osteopetrosis (op/op)Biofunctionalization of Metal Surface by Immobilization of Poly(Ethylene Glycol) Terminated Amine Microstructure and Mechanical Properties of Hot-Pressed Co-Cr-Mo Alloy Compacts Effect of Co-Doping Cation on Phase Stability of Zirconia Bioceramics in Hot WaterEffect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion and Mechanical PropertiesEffect of Second Phase Particles on Phase Stability of Zirconia in Hot WaterEffects of Additional Elements on Structure, Mechanical Strength and Chemical Properties of Ni-Free Ti-Based Bulk Metallic Glasses for BiomaterialsEffect of Thermo-Mechanical Processing on Texture and Elastic Modulus of Ti-Nb-Si Alloys for Biomedical ApplicationConfiguration Optimization of Truss Structures Using Harmony Search Heuristic AlgorithmHydroxyapatite Formation and Protein Absorption on Triethyl Phosphate Modified Titanium SurfacePreparation of Silicon-Containing Apatite Coating on TitaniumBall-Like Carbon Deposits Synthesized by Catalytic CombustionRaman Spectroscopic Characterization for Carbon Nanofibers Produced by Using Ferric Chloride of Different Concentration as Catalyst PrecursorElectrochemical Properties of TiN and ZrN Coated Ti-Hf AlloyAC Impedance Behaviors of Ti-Zr Binary Alloys for BiomaterialsElectrochemical Characteristics of Osteoblast Cultured Ti-Ta Alloy for Dental ImplantEffects of Multi-Layered TiN/ZrN/Tooth-Ash Composite Coatings on the Surface Characteristics of Ti-(Nb, Zr, Ta, Hf) Dental Implant Alloys with Low Elastic ModulusStudy on Electrochemical Hydrogen Storage of Multi-Walled Carbon NanotubesNano Composite Membranes of Sulfonated Poly(2,6-Dimethyl-1,4-Phenylene Oxide)/Poly(2,6-Diphenyl-1,4-Phenylene Oxide) Copolymer and SiO2 for Fuel Cell ApplicationProgress on the Composite Membranes for PEM Fuel Cells Investigation of PTFE-Reinforced Integral Multi-Layered Self-Humidifying Membranes for PEM Fuel Cells ApplicationIncrease of Electrolysis Cell Performance by Addition of PVDF and Graphite Powder on MEA for Regenerative Fuel CellsImprovement of Electrical and Thermal Properties of Epoxy Based Graphite Bipolar Plate for PEMFC Hydrogen Storage Properties of Mg-Al Alloy Prepared by Super Lamination TechniqueSurface Fractals and Wetting Properties of Porous Anodes Strengthened by Ni3Al for Molten Carbonate Fuel CellEffect of Ni Coating on Hydrogenation Kinetics in Pure Mg and Mg-Mg2Ni Eutectic AlloySynthesis and Decomposition of Pure Ca(AlH4)2Hydrogen Solubility and Resistance to Hydrogen Embrittlement of Nb-Pd Based Alloys for Hydrogen Permeable MembraneDevelopment of Environmental Cell for Gas Reaction of Nano-Size ParticlesApplication of Open Celled Al in the Alloy Hydride System for Hydrogen StorageHigh-Pressure Synthesis of Novel Hydride in Ca-TM SystemsElectronic Transport Properties of Tin-Filled Cobalt AntimonidesApplication of Porous Concrete to a Structural Foundation in Soft GroundNb-NbN Cermet Film as Solar Selective CoatingFabrication of Magnesium Foam by Precursor Method Using Machined ChipsFabrication of Long Scale Aluminum Foam by Transfer Heat Foaming of PrecursorOptimization of Heat Treatment Parameters of Mo-Free High-Cr Cast Iron Mill BallsCombustion Synthesis in Mn-Si-C-N Using Mn as a Surrogate for AmFabrication of Monolithic UAl2 Pellet for High-Density Nuclear FuelMicrostructural Evolution in Cerium Dioxide Irradiated with Heavy Ions at High TemperatureFirst-Principles Study of Structural and Electronic Property of Pyrochlore Dy2Sn2O7Material Property of a Passive Oxide Formed on Alloy 600 Modeling and Simulation of Driveline Test Bench for Automotive Chassis Component SystemNumerical Simulation of Unidirectional Solidification Process of Turbine Blade CastingsEffect of Orifice Shape in Contour Crafting with Ceramic Material: A Simulation for Extrusion and Deposition MechanismA New Growth Kinetics in Simulation of Dendrite Growth by Cellular Automaton MethodNumerical Simulation on Stress Fields of Lasers Braze Fusion Welding Electronic State Calculation of Manganese Dioxide and Manganese-Molybdenum Oxide for Dimensionally Stable AnodeSolidification Behavior of AZ31 Magnesium Alloy Plate during HCC with Constant VelocityOptimization of Preform in Forging Process Using Kriging ModelSpringback Compensation Based on Finite Element for Multi-Point Forming in ShipbuildingApplication of RBF Network for Forecasting Characteristics of In-Flight Particles by Plasma SprayingThermodynamic Analysis of the Ti-Zr-H Ternary Phase DiagramNumerical Simulation and Experimental Research on Rolling Process of Conical Ring with Inner StepsFriction Stir Weld Modeling of Aluminum AlloysEffect of Grain Boundary Characteristics on Lattice OrientationsThe Injection Molding Simulation of Lever Cam Ass?y Using High-Functional PolymerHot Tearing Prediction of Aluminum Alloy in the Casting ProcessReal-Time Simulation Measurement System for Transient Temperature of Impacting Droplet Based on the Virtual InstrumentRecovery of Magnesium Oxide and Magnesium Hydroxide from the Waste BittrenNumerical Analysis on Flow Stress of AZ61B Magnesium Alloy during Hot Compression Simulation TestingStructure Stability and Electronic Structure of Semiconducting Rhenium Silicide with DopingCharacterization of Dynamic Globularization Behavior during Hot Working of Ti-6Al-4V AlloyPrediction of Mechanical Properties and Microstructure Distribution of Normalized Large Marine CrankthrowApplication of Numerical Simulation Technology on the Design of Camera Shell during Die Casting ProcessFinite Element Analysis of Cable Products for High Impaction and Fatigue Resistance with Nonlinear Material ModelsThe Effect of the Heat Flux and Temperature on Thermal Strain of Aluminum Alloy Casting MoldOn the Microstructure and Properties of Tungsten Heavy AlloysPhysical Property Evaluation for High Purity Niobium and Tantalum Rare MetalsHigh Temperature Corrosion Behaviors of Carbon Steels by A Pressurized WaterPulse Electroplating of Ni-P-Nano TiO2 and ZrO2 for Steam Generator Tube RepairLong Term Degradation Behavior of Impact Properties of Hydraulic Forged Superalloy 718 during Exposure at High TemperatureNatural Photo-Oxidation Degradation of Polypropylene Containing Nucleating AgentElectric Field-Induced Structural Modulation of Epitaxial PbZrTiO3 Ferroelectric Thin Films as Studied Using X-Ray MicrodiffractionPhotocatalytic Activity of TiO2 Modified by Heteropolytungstate Acid Application of a Temperature-Compensating FBG Sensor to Strain MeasurementPrecipitation Behavior of MN(M=V,Nb) Phase in the 7Cr-1.5Mo Ferritic Heat Resistant SteelsDislocations in Phase-Change Ge2Sb2Te5 AlloyExplosion Bulge Test of High Srength Low Alloy Steel PFS-700 in Air and UnderwaterPb(Zr0.95Ti0.05)O3 Powders Synthesized by PEG Modified Pechini Method: Characterization and Sintering BehaviorNanostructural Characterization of Hydrothermally Stable ?-Alumina-Based Composite Materials by Transmission Electron MicroscopyAdhesion Promoter and Anti-Sticking Layer Effects on Adhesion Properties Using Symmetric AFM ProbeA Study of Mechanical Behavior of Au Films by Visual Image Tracing SystemEffect of Cyclic Strain Rate on Environmental Fatigue Behaviors of SA508 Gr.1a Low Alloy Steel in 310?C Deoxygenated Water Effect of Processing Conditions of Dolomite on the Antiviral ActivityFatigue Crack Growth Behaviors of AISI Type 347 Nuclear Piping MaterialHydrazine-Dependency of Low-Alloy Steel Flow-Accelerated Corrosion in a Deoxygenated Solution at 250?CCarbon Nanostructures by Using FeCl3 as Catalyst PrecursorThe Effect of Alloy Elements on Cyclic Fatigue Behavior of Bucket Candidate Materials for USC Power PlantsEvaluation of Corrosion Fatigue Crack Propagation Characteristics of TMCP Steel in Synthetic Seawater under Cathodic ProtectionApplication of Continuous Indentation Technique in Thermal Power PlantMicro-Scratch Analysis on Adhesion between Thin Films and PES SubstrateMicrostructure-Based Computational Simulation and Experimental Measurement of Stresses in Spheroidized SteelsAssessment of Behaviour Characteristics for Geobag Wall System Using Recycled Waste ConcreteNanoindentation Characterization of Mechanical Properties of Ferrite and Austenite in Duplex Stainless SteelCharacterization of Solid Synthetic Fuel Derived from Physic Nut and Glycerol Waste Using Single Particle Reactivity AnalysisCharacteristics of Residual Stress in P92 Steel WeldsAE Evaluation of Relationship between AE Signals and Fracture Mechanisms for the Weldment of Pressure Vessel SteelMeasurement of Residual Stress in Thin-Sized Steel Wires by Using Focused Ion Beam and Digital Image Correlation MethodThermal Crack Propagation Behavior on Nitrided H13 Hot Work Die SteelNew Compositionally-Ordered GeSi Nano Dots Fabricated with 1250 keV ElectronsHigh-Resolution Dynamic Analysis of the Phase Transformation in Ge2Sb2Te5 AlloyTerrace Formation of SrTiO3 (111) Substrates for Epitaxial Thin Film Growth with Various Etching ConditionsMicrostructures and Growth Characteristics of Self-Assembled InAs/GaAs Quantum Dots Investigated by Transmission Electron MicroscopyDistribution Characteristics of Stress Corrosion Cracks in a Retired Steam GeneratorA Study on the Evaluation of Characteristics and Useful Life Prediction of Rubber Component for Elevator CabinThe Effect of Strain Rate on the Fracture Modes of Mg Alloys The Evaluation of the Fatigue Life in Arc Welded Parts of SAPH45 Steels Using an Acoustic Emission MethodDevelopment of a Fretting Wear Evaluation Method in the Nuclear Fuel Fretting by Using a Wear Scar ShapeDesign of Electrical Panels of Naval Vessels for Improved Fatigue, Shock and Vibration PerformanceA New Method for Nondestructive Evaluation of Mechanical Properties Using Instrumented Indentation TechniqueStudy on Assessing Safety of Materials with Defect by Thermal Image CameraMechanical Properties of Railway Wheel for Standard ReinforcementFatigue Life Evaluation of Pipe Welds in Power Plant Using Advanced Nondestructive MethodsExperimental Study of Interference Factors and Finite Element Simulation on Oil-Gas Pipeline Magnetic Flux Leakage DensityThermophysical Behavior of Micro Void in ?-Via of Microelectronic Substrate during Reliability TestDamage Index Comparison for a Composite Stiffened Panel Using Lamb WaveCrack Initiation Factor by Impact Fretting Wear at INCONEL Alloy for Steam Generator Tube in Nuclear Power PlantsSpherulitic Structures in Bisphenol-A Polycarbonate Crystallized at High PressureHRTEM Observation of a-Phase in Cu-Zn Alloy Annealed at Lower TemperatureDeformation and Corrosion Behavior of a High Purity Manganese Free AZ31 Magnesium AlloyEffect of Cold-Rolling on Precipitation Phenomena in 316L Austenitic Stainless SteelFemtosecond Laser Synthesis of High-Pressure Phases of Sia Phase Forming on Surface Layer and Precipitating inside of a Ti-Mo Based Alloy Annealed in AirStrain Aging of Heavily Drawn Pearlitic Steel WiresPhase Changes in AISI 436L Ferritic Stainless Steel after Nitrogen Permeation Heat TreatmentThe Effects of Si on the Nucleation Kinetics of Ferrite in Dual Phase SteelsTransmission Electron Microscopy (TEM) Observations of Phase-Separations of Gamma-Prime Precipitates in Ni-Al-Fe and Ni-Si-Fe Ternary AlloysECCI Observation of Dislocation Structure Formed around an Intergranular Fatigue Crack in CopperMicrostructures of Ni/Cu and Ni-Co/Cu Multilayers Produced by Electrodeposition MethodFriction Behavior of HVOF Thermal Spray Coating of Micron Size WC-Co PowderMicrostructures and Cavitation Erosion Resistance of Ni60/TiC Plasma-Clad CoatingGrain Boundary Character Distributions of Strain-Annealed 304 Stainless Steel First Principles Study on the Adsorption of Alkali Metal on C(100)( 2?1)Some Observations Regarding Erosion-Corrosion Performance of HVOF-Sprayed Cr3C2- NiCr and Cr3C2- NiCr-(25) WC-Co Coatings in Actual Boiler EnvironmentJoining of Aluminum Foam/Aluminum Metal by Spark Plasma Sintering ProcessThe Evolution of Surface Damage in Press-Fitted Shaft According to the Bending Stress Pack Boronizing of a Co-Cr-W-C Alloy Study on the Properties of Chromium Matrix Composite Plated with Nanosized Diamond Powders