Advanced Materials and Processing

<ul><li>Sticking Mechanisms Occurring during Hot Rolling of Ferritic Stainless Steels</li><li>Sound Radiation Characteristics for Structural Damage Identification</li><li>Optimization Results of High Strength Steel Production Process</li><li>Metal Injection Molding of Nickel-Free Austenitic Stainless-Steels I-Manufacturing Process</li><li>Metal Injection Molding Method of Ni-Free Austenitic Stainless Steel II - Microstructure and Mechanical Properties</li><li>Aqueous Corrosion Characteristics of Iron Aluminides</li><li>Continuous Cooling Transformation Behavior of High Strength Low-Alloyed Cold Rolled Sheet Steel </li><li>Study of High Temperature Wear Resistance of Hot Work Steel for Magnesium Alloy Die Casting</li><li>Dry Sliding Wear Mechanisms of the High Nitrogen Austenitic 18Cr-18Mn-2Mo-0.9N Steel at Different Applied Loads</li><li>Fluid-Structure Coupled Analyses of Composite Wind Turbine Blades </li><li>Cementite Decomposition of Pearlitic Steels during Cold Drawing</li><li>The Texture Evolution of Dual Phase Steel Sheets</li><li>Effects of Finishing Rolling Temperature on the Microstructural Behavior for Fe-0.1C Steel as a Function of Niobium Content</li><li>Plastic Deformation Behavior of Micro-Alloyed Cold Forging Steel</li><li>Abnormal Grain Growth of Fe-3%Si Steel Approached by Solid-State Wetting Mechanism</li><li>Analysis on Void Closure Behavior during Hot Open Die Forging</li><li>FIB and TEM Studies on the Bainitic Microstructure in Low Carbon HSLA Steels</li><li>The Potentiality of Micro-Scaled Multi-Filament Wire Forming Using Repetitive Hydrostatic Extrusion Process</li><li>Mechanical Behaviors of Mg-6%Al-0.2%Mn Based Casting Alloys</li><li>Processing and Tensile Property of Nano Dispersed Al-Fe-(Mo, V, Zr) Bulk Alloy</li><li>Enhanced Formability of AZ31 Magnesium Alloy Sheet Processed by Equal Channel Angular Rolling and Annealing Treatment</li><li>The Effect of Alloying Elements on the c/a Ratio of Magnesium Binary Alloys</li><li>Forging Process Design of Al Rotating Arm Holder by FE Analysis</li><li>Effects of Heat Treatments on Microstructure of AM50 Magnesium Alloy</li><li>Homogeneity of Grain Refinement of Aluminum Alloy with Compressive Torsion Processing</li><li>Effect of Alloying Elements on Mechanical Properties for A356 Casting Alloy</li><li>Research and Development of Mg-Al-Sr Alloys</li><li>Preparation of Mg-Sr Alloy Using Electrochemical Reduction</li><li>Relationship between Tensile Deformation and Crystallographic Orientation of Grains in the Balanced Al-Mg₂ Si Alloys</li><li>Relationship between Tensile Deformation and Crystallographic Orientation of Grains in Al-Mg-Si Alloys with Cu</li><li>Influence of Compressive Torsion Processing Temperature on Microstructure Refinement and Property of Aluminum Alloy</li><li>Heat Resistance of Mg-Nd Based Casting Alloys Containing Gadolinium and Yttrium</li><li>Effect of Ca and Sr Content on Elevated Temperatures Mechanical Properties of a Cast AZ91 Magnesium Alloy</li><li>Mechanical Properties of Twin Roll Cast AZ91 Magnesium Alloy at Room Temperature</li><li>Influence of Initial Texture on Twin Formation and Plastic Deformation of Rolled AZ31 Mg Alloy</li><li>Microstructure and Dynamic Ultra-Micro Hardness of the As-Cast and Extruded Mg-Al-Ca-Sm Alloys </li><li>HRTEM Observation of the Age Hardening Precipitates in Mg-Zn Alloy</li><li>Continuous Rheological Forming of A6061 Wrought Aluminum Alloy by Using Helical Shape Stirrer and its Thixoforging Process</li><li>Effect of Heat Treatment on Microstructures and Properties of Mg-9Gd-4Y-0.3Zr Alloy</li><li>Titanium Hydriding and Consolidation for Recycling of Titanium Tuning Chip</li><li>Influence of Microstructure Change on the Superplastic Properties of Ti₃Al Base Alloy</li><li>Thermodynamic Analysis of Nb-Cr Powders of Mechanical Alloying</li><li>Attempt to Control Spatial Distribution of Nano-Gold Particles Using Nanoporous Surfaces of FeAl Single Crystal</li><li>Effect of Heat Treatment Conditions on Microstructure and Fracture Toughness of a Cast Ti-Al Alloy</li><li>Interfacial Characteristics of Iron Aluminides Intermetallic Layers on Al-Coated Steel Sheet</li><li>Crystal Structure and Thermoelectric Properties of ReSi_1.75 Based Alloys </li><li>Effect of Texture on Deformation Behavior of AZ31 Mg Alloy</li><li>First Principles Calculations of Thermodynamic Quantities and Phase Diagrams of High Temperature BCC Ta-W and Mo-Ta Alloys</li><li>Mechanical Properties According to Heat Treatment for Gas Turbine Blade Material</li><li>Effect of Creep Deformation on the Crystallographic Orientation Distribution in Ni Base Superalloy</li><li>Effect of Applied External Stress on Hydrogen Desorption from Metal Hydrides</li><li>Elastic Properties of L1₀-Ordered Single Crystals</li><li>Microstructure Evolution during Lithiation and Delithiation of Ni₃Sn₂ Anode for Lithium Secondary Batteries</li><li>Crystal Structure Variation of Ru₂Si₃ Upon Alloying with Mn</li><li>Creep Deformation and Microstructure of Alloy 617 Foil at High Temperature</li><li>Fabrication of Textured SrBi₂Nb₂O₉ Ceramics by Templated Grain Growth</li><li>Study on the Properties of Doped La in BaBi₄Ti₄O₁₅ Ceramic</li><li>Characterization of Bismuth Titanate Powders</li><li>In Situ Synthesis of TiB₂-TiC_x Ceramic Matrix Composites by Hot Isostatic Pressing</li><li>Preparations and Characterizations of Perovskite PMN Ceramics by Using a One-Step Calcination Method</li><li>Corrosion Behavior of Si₃N₄ Ceramics under High-Temperature and High-Pressure Water Condition</li><li>Electromechanical Properties of NKN-5LT Multilayer Actuator</li><li>H₂/CO₂ Gas Separation Characteristic of Zeolite Membrane at High Temperature</li><li>Hydrogen Separation Characteristics of SiC Nanoporous Membrane at High Temperature</li><li>Electrochemical Properties of Cathode for Solid Oxide Fuel Cell with Gd-Doped Ceria Electrolyte</li><li>Fabrication of Porous Alumina Ceramics by Spark Plasma Sintering Method</li><li>Dynamic Thermo-Mechanical Properties of Chemically Surface Modified MWCNTs Reinforced Polymeric Composites </li><li>Fabrication of Carbon Nanotubes Reinforced Polyethylene Fibers by Melt Spinning: Process Optimization and Mechanical Strength Characterization </li><li>Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites</li><li>Spectral Element Modeling for Elastic Two-Layer Beams</li><li>Properties of CB/Rubber Composites Filled by Carbon Black Used as Catalysts for Hydrocarbon Decomposition</li><li>Electromagnetic Interference Shielding Properties of Carbon Nanotubes Reinforced Composites</li><li>A Study on Fatigue Properties of a TiNi/Al Shape Memory Alloy</li><li>Microstructure and Superconductive Property of the Extruded MgB₂/Al Composite Materials</li><li>Numerical Simulations for Uniaxial Ratcheting of SiC_P/6061Al Composites Concerning Particulate Arrangement</li><li>Fabrication of Oxide Ceramics Composite by Reactive Infiltration Process</li><li>Effect of Powder Blending Ratio on Synthesis of TiB₂ Particles by Al-Ti-B Combustion Reaction</li><li>Development of Hybrid FRP-Concrete Composite Compression Members</li><li>Effect of Phosphorus Doping into the Silicon as an Anode Material for Lithium Secondary Batteries</li><li>A Study on the Design Curves for Pultruded Composite Columns</li><li>Structural Behavior of Polymer Mortar GFRP Composite Pipe</li><li>Physical Characteristic of Ready Mixed Concrete with Different Replacement Ratio of Recycled Aggregate</li><li>Evaluation of the Influence of Additives on the Mechanical Properties and Photo-Stability of Glass Fiber Reinforced Epoxy Pipes Using Central Composite Design</li><li>Microstructure, Hardness, and Wear Resistance of Powder-Injection-Molded Products of Fe-Based Metamorphic Powders </li><li>Fabrication of Sandwich Structure with Superplastic Forming Process from Diffusion Bonded Ti-6Al-4V Sheets</li><li>Preparation and Characterization of Tungsten Heavy Alloy Feedstock for Metal Injection Molding</li><li>The Effect of Isothermal Forging Process Parameters on the Microstructure and the Properties of TA15 Near ? Titanium Alloy</li><li>Temperature Dependent Microstructure and Mechanical Behavior in AZ31 Alloy Processed by an Asymmetric Rolling</li><li>Research on Horizontal Electromagnetic Continuous Casting of Sn-P Bronze Strips</li><li>Effects of Temperature and Strain Rate on Compressive Mechanical Properties of Ultrafine-Grained CP Titanium</li><li>Recrystallization Characteristics of Ti-50.9at%Ni Alloy Processed by Equal Channel Angular Extrusion</li><li>Experimental Study of Springback in Draw Bend Test of AZ31B Magnesium Alloy Sheet</li><li>Texture and Formability of Frictionally Rolled AA 1050 Aluminum Alloy Sheets</li><li>The Study of Residual Stresses for Roller Hemmed Aluminum Alloys</li><li>Formability and Mechanical Property of Aluminum Sheets Locally Surface-Modified by the Concept of Surface Friction Joining</li><li>Evolution of Microstructure and Texture of Pure Al Single Crystal Having {112}<110> Orientation during Severe Plastic Deformation</li><li>Characterization of Mg-Al Sheet Clad Materials Fabricated by Hot Rolling</li><li>Mechanical Properties of Ultra-Fine Grained Fe-Cr-Ni Alloy Fabricated by ARB </li><li>Extrudability and Bonding Strength of Copper Clad Aluminum Alloy Composites Produced by Indirect Extrusion Process</li><li>Effects of Microstructure on Mechanical Properties of HRS Processed SUS316L Stainless Steel </li><li>Analysis of Surface Roughness of Immersion Sn Plating Film via Micro Etch Process </li><li>Ring-Rolling Process for Manufacturing Ti-6Al-4V Plane and Profiled Ring-Products</li><li>Dynamic Recrystallization during Hot Extrusion in Mg-3Al-0.1Y Alloy</li><li>Warm Forging Characteristics of AZ31 Alloy</li><li>Low-Pressure Preheating Combustion Synthesis of Silicon Nitride</li><li>Improved Density Distribution in Powder Metallurgy Parts with Filtering Methods</li><li>Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys</li><li>Study on Automated Scrap-Sorting by an Image Processing Technology</li><li>Microwave Assisted Esterification of Waste Cotton Fabrics for Biodegradation Films Preparation</li><li>Influence of Annealing Atmosphere on the Mechanical and Wear Properties of Free-Cutting Phosphor Bronze Alloy</li><li>Grain Refinement of Mg-Y-Zn Alloy by Friction Stir Processing </li><li>Mechanical Milling of Prealloyed Cu-Cr Powders Prepared by Gas Atomization </li><li>An Activity Model of N and V in Fe-C-V-N Molten Metal</li><li>Optimization of Laser-Arc Interspacing Distance during CO2 Laser-GMA Hybrid Welding by Using High-Speed Imaging </li><li>Mechanical Properties and Microstructure of Strip Casted Ag-27%Cu-25%Zn-3%Sn Brazing Alloy </li><li>Micro-Structural Evolution of AlCu5MnCdVA Cast Aluminum Alloy by Semi-Solid Isothermal Annealing Process</li><li>A Study of Electroslag Welding Process for Special Welding Joint with Thick Plate</li><li>Sintering Mechanism of Composite Ag Nanoparticles and its Application to Bonding Process-Effects of Ag₂CO₃ Contents on Bondability to Cu-</li><li>Studies for the Influences of Welding Parameters of GMA Welded 600MPa Grade TRIP Steel</li><li>Effects of the Process Parameters on Beads by Plasma Arc Welding of the Membrane for LNG Ships </li><li>The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel </li><li>Characteristics of SnO_x-ZnO Composite Film on Poly Ethylene Terephalate (PET) Substrate Prepared by ECR-MOCVD</li><li>Thermodynamic Calculation of Alpha-Case Formation in Titanium Alloys</li><li>Functions and Morphology of Metal Lead Addition to Ancient Chinese Bronzes</li><li>In Situ Combustion Synthesis of Ti-Al Intermetallic Compounds in Al Alloy Casting Process</li><li>Permanent Mold Casting Practice and Microstructure and Mechanical Properties of Thin-Sectioned ADI Casting</li><li>Effect of Additive Powder on Microstructural Evolution in the Wide-Gap Brazed Region by In Situ High Temperature ESEM</li><li>A Study on the Welding Characteristics of Dissimilar Metal Using a High Power CW Nd:YAG Laser </li><li>Rheocast of Al-Si-Mg Alloy Containing 1Mass% Iron</li><li>Improvement of the Accuracy of High Temperature Slab Weight in Continuous Casting </li><li>Surface Roughness of Cu-Be Alloy (C17200) Rod Alloy Produced by Horizontal Type Continuous Casting Process</li><li>Effects of Electric Pulse on Solidification Structure of KS282 Alloy</li><li>Fatigue Crack Characteristics of Friction Stir Welded Aluminum Alloy Joints</li><li>Alignment of Primary Phase of a Binary Alloy during Solidification</li><li>Microstructure and Properties of Cu-3.2Ni-0.75Si-0.3Zn Alloy for Lead Frame</li><li>Preparation of CaAl₂O₄: Eu²⁺ Long Persistent Blue Phosphor</li><li>Large Isothermal Magnetic Entropy Change after Hydrogen Absorption into La_0.5Pr_0.5(Fe_0.88Si_0.12)₁₃</li><li>Exchange Bias Field Change of FeMn-NiFe Films by He Ion Irradiation Using DuoPIGatron Source</li><li>Electrodeposited Nickel Nanowire Arrey</li><li>Effect of Continuous Casting Parameters on Microstructure and Texture of Gold Bonding Wire for Semiconductor Packaging</li><li>Fabrication of Ta-Al-N Thin Films and its Cu Diffusion on Barrier Properties</li><li>Synthesis and Growth Mechanism of ZnO Nanoneedles Using Thermal Oxidation Upon a Plated Zn Nanocrystalline Layer</li><li>Solventless Synthesis of Bi2S3 Nanowires and their Application to Solar Cells</li><li>The Improvement of Permeability and Strength in Soft Magnetic Composites Motor Core Using Spark Plasma Sintering Process</li><li>Nanocrystalline Diamond Film Produced by Argon Addition in the CH₄-H₂ Microwave CVD Plasmas</li><li>Improving the Properties of Sapphire by Coatings</li><li>Directed Crystallization of Amorphous Silicon Deposits on Glass Substrates</li><li>Recovery of Structural and Luminescent Properties in Zinc-Implanted ZnO Films </li><li>Visible-Light Photodegradation of Rhodamine B on Carbon Doped Titanium Oxide Thin Film Prepared by Atmospheric MOCVD</li><li>Effect of Plating Condition on the Mechanical Properties and Residual Stress of Electroplated Copper Film</li><li>Characterization of (Ti, Al) N Films Synthesized by Arc Ion Plating</li><li>Low-Temperature Deposition of Amorphous Carbon Films for Surface Passivation of Carbon-Doped Silicon Oxide</li><li>Preparation and Characterization of Doped Nanometer TiO₂</li><li>Effect of Residual Stress on P Doped Nano-Crystalline Silicon Deposited by HWCVD Films</li><li>MOCVD Growth of SiC Nanowires Aiming at the Control of their Shape</li><li>Fabrication of OTFT Array with Coated Thin Film Dielectric and Printed Electrodes by Using Microcontact Printing</li><li>Synthesis and Characterization of Y₃Al₅O₁₂ Nanocrystals</li><li>Preparation of Nano-Particles of Metal Oxides via a Novel Solid-Liquid Mechanochemical Reaction Technology</li><li>Crystal Growth in Amorphous Binary Alloys of Zr-Ni System</li><li>Effect of Magnetic Field on Crystallization of Fe-Based Metallic Glass</li><li>Microstructure and Optical Properties of Fe-Doped SnO₂ Nanoparticles Synthesized by Hydrothermal Method</li><li>Structural Defects and Changes in Al-Pd-Fe Crystalline Approximant</li><li>Fabrication of Homogeneous Bulk Nanocrystalline Ni-W Alloys by an Electroforming Process</li><li>Bulk Mechanical Alloying of Al/Fe Multilayer by Accumulative Roll-Bonding Process</li><li>Structural and Mechanical Behaviors of Partially Devitrified Ti-Based Bulk Metallic Glass </li><li>Synthesis Behavior of La_0.7Ca_0.3MnO₃ by Hydrothermal Method</li><li>Melting Liquid Joint Method of Ti(Cu)-Base Bulk Metallic Glassy Alloy</li><li>Y-Shaped Carbon Nanowires Obtained from Ethanol Flames and their Growth Mechanism</li><li>Comparison between Tribological Characteristics of Al-Cu-Fe-B Quasicrystalline and Mo Coatings</li><li>Upsetting of Ultrafine-Grained Bulk Al-Mg Alloy Consolidated by Hydrostatic Extrusion</li><li>Glass Transition within the Cluster Variation Approximation</li><li>Carbon Nanotubes Obtained by ECC Technique with Cobalt Salt as Catalyst Precursor</li><li>Synthesis of Carbon Nanofibers by Ethanol Catalytic Combustion Technique</li><li>The Influence of Catalyst Nature on the Morphology of Multi-Directionally Grown Carbon Nanofibers</li><li>Synthesis of Zr-Based Glassy Alloy Foams </li><li>Magnetic and Mechanical Properties of Fe-Co-B-Si-Nb-M (M = Al, V, Mo,) Bulk Metallic Glasses</li><li>Fine Crystalline Phase Dispersion in Zr-Based Bulk Metallic Glass by Laser Irradiation</li><li>High-Field Maxwell Stress Effect of Dielectric Actuator Based on Segmented Polyurethane</li><li>Topology Optimization of Three-Dimensional Biodegradable Polymer Multi-Layer Microstructure for Implantable Drug Controlled Release</li><li>Evaluation of BAp Orientation Using Mouse Models for Osteoporosis (OPG-KO) and Osteopetrosis (op/op)</li><li>Biofunctionalization of Metal Surface by Immobilization of Poly(Ethylene Glycol) Terminated Amine </li><li>Microstructure and Mechanical Properties of Hot-Pressed Co-Cr-Mo Alloy Compacts </li><li>Effect of Co-Doping Cation on Phase Stability of Zirconia Bioceramics in Hot Water</li><li>Effect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion and Mechanical Properties</li><li>Effect of Second Phase Particles on Phase Stability of Zirconia in Hot Water</li><li>Effects of Additional Elements on Structure, Mechanical Strength and Chemical Properties of Ni-Free Ti-Based Bulk Metallic Glasses for Biomaterials</li><li>Effect of Thermo-Mechanical Processing on Texture and Elastic Modulus of Ti-Nb-Si Alloys for Biomedical Application</li><li>Configuration Optimization of Truss Structures Using Harmony Search Heuristic Algorithm</li><li>Hydroxyapatite Formation and Protein Absorption on Triethyl Phosphate Modified Titanium Surface</li><li>Preparation of Silicon-Containing Apatite Coating on Titanium</li><li>Ball-Like Carbon Deposits Synthesized by Catalytic Combustion</li><li>Raman Spectroscopic Characterization for Carbon Nanofibers Produced by Using Ferric Chloride of Different Concentration as Catalyst Precursor</li><li>Electrochemical Properties of TiN and ZrN Coated Ti-Hf Alloy</li><li>AC Impedance Behaviors of Ti-Zr Binary Alloys for Biomaterials</li><li>Electrochemical Characteristics of Osteoblast Cultured Ti-Ta Alloy for Dental Implant</li><li>Effects of Multi-Layered TiN/ZrN/Tooth-Ash Composite Coatings on the Surface Characteristics of Ti-(Nb, Zr, Ta, Hf) Dental Implant Alloys with Low Elastic Modulus</li><li>Study on Electrochemical Hydrogen Storage of Multi-Walled Carbon Nanotubes</li><li>Nano Composite Membranes of Sulfonated Poly(2,6-Dimethyl-1,4-Phenylene Oxide)/Poly(2,6-Diphenyl-1,4-Phenylene Oxide) Copolymer and SiO₂ for Fuel Cell Application</li><li>Progress on the Composite Membranes for PEM Fuel Cells </li><li>Investigation of PTFE-Reinforced Integral Multi-Layered Self-Humidifying Membranes for PEM Fuel Cells Application</li><li>Increase of Electrolysis Cell Performance by Addition of PVDF and Graphite Powder on MEA for Regenerative Fuel Cells</li><li>Improvement of Electrical and Thermal Properties of Epoxy Based Graphite Bipolar Plate for PEMFC </li><li>Hydrogen Storage Properties of Mg-Al Alloy Prepared by Super Lamination Technique</li><li>Surface Fractals and Wetting Properties of Porous Anodes Strengthened by Ni₃Al for Molten Carbonate Fuel Cell</li><li>Effect of Ni Coating on Hydrogenation Kinetics in Pure Mg and Mg-Mg₂Ni Eutectic Alloy</li><li>Synthesis and Decomposition of Pure Ca(AlH₄)₂</li><li>Hydrogen Solubility and Resistance to Hydrogen Embrittlement of Nb-Pd Based Alloys for Hydrogen Permeable Membrane</li><li>Development of Environmental Cell for Gas Reaction of Nano-Size Particles</li><li>Application of Open Celled Al in the Alloy Hydride System for Hydrogen Storage</li><li>High-Pressure Synthesis of Novel Hydride in Ca-TM Systems</li><li>Electronic Transport Properties of Tin-Filled Cobalt Antimonides</li><li>Application of Porous Concrete to a Structural Foundation in Soft Ground</li><li>Nb-NbN Cermet Film as Solar Selective Coating</li><li>Fabrication of Magnesium Foam by Precursor Method Using Machined Chips</li><li>Fabrication of Long Scale Aluminum Foam by Transfer Heat Foaming of Precursor</li><li>Optimization of Heat Treatment Parameters of Mo-Free High-Cr Cast Iron Mill Balls</li><li>Combustion Synthesis in Mn-Si-C-N Using Mn as a Surrogate for Am</li><li>Fabrication of Monolithic UAl₂ Pellet for High-Density Nuclear Fuel</li><li>Microstructural Evolution in Cerium Dioxide Irradiated with Heavy Ions at High Temperature</li><li>First-Principles Study of Structural and Electronic Property of Pyrochlore Dy₂Sn₂O₇</li><li>Material Property of a Passive Oxide Formed on Alloy 600 </li><li>Modeling and Simulation of Driveline Test Bench for Automotive Chassis Component System</li><li>Numerical Simulation of Unidirectional Solidification Process of Turbine Blade Castings</li><li>Effect of Orifice Shape in Contour Crafting with Ceramic Material: A Simulation for Extrusion and Deposition Mechanism</li><li>A New Growth Kinetics in Simulation of Dendrite Growth by Cellular Automaton Method</li><li>Numerical Simulation on Stress Fields of Lasers Braze Fusion Welding </li><li>Electronic State Calculation of Manganese Dioxide and Manganese-Molybdenum Oxide for Dimensionally Stable Anode</li><li>Solidification Behavior of AZ31 Magnesium Alloy Plate during HCC with Constant Velocity</li><li>Optimization of Preform in Forging Process Using Kriging Model</li><li>Springback Compensation Based on Finite Element for Multi-Point Forming in Shipbuilding</li><li>Application of RBF Network for Forecasting Characteristics of In-Flight Particles by Plasma Spraying</li><li>Thermodynamic Analysis of the Ti-Zr-H Ternary Phase Diagram</li><li>Numerical Simulation and Experimental Research on Rolling Process of Conical Ring with Inner Steps</li><li>Friction Stir Weld Modeling of Aluminum Alloys</li><li>Effect of Grain Boundary Characteristics on Lattice Orientations</li><li>The Injection Molding Simulation of Lever Cam Ass'y Using High-Functional Polymer</li><li>Hot Tearing Prediction of Aluminum Alloy in the Casting Process</li><li>Real-Time Simulation Measurement System for Transient Temperature of Impacting Droplet Based on the Virtual Instrument</li><li>Recovery of Magnesium Oxide and Magnesium Hydroxide from the Waste Bittren</li><li>Numerical Analysis on Flow Stress of AZ61B Magnesium Alloy during Hot Compression Simulation Testing</li><li>Structure Stability and Electronic Structure of Semiconducting Rhenium Silicide with Doping</li><li>Characterization of Dynamic Globularization Behavior during Hot Working of Ti-6Al-4V Alloy</li><li>Prediction of Mechanical Properties and Microstructure Distribution of Normalized Large Marine Crankthrow</li><li>Application of Numerical Simulation Technology on the Design of Camera Shell during Die Casting Process</li><li>Finite Element Analysis of Cable Products for High Impaction and Fatigue Resistance with Nonlinear Material Models</li><li>The Effect of the Heat Flux and Temperature on Thermal Strain of Aluminum Alloy Casting Mold</li><li>On the Microstructure and Properties of Tungsten Heavy Alloys</li><li>Physical Property Evaluation for High Purity Niobium and Tantalum Rare Metals</li><li>High Temperature Corrosion Behaviors of Carbon Steels by A Pressurized Water</li><li>Pulse Electroplating of Ni-P-Nano TiO₂ and ZrO₂ for Steam Generator Tube Repair</li><li>Long Term Degradation Behavior of Impact Properties of Hydraulic Forged Superalloy 718 during Exposure at High Temperature</li><li>Natural Photo-Oxidation Degradation of Polypropylene Containing Nucleating Agent</li><li>Electric Field-Induced Structural Modulation of Epitaxial PbZrTiO3 Ferroelectric Thin Films as Studied Using X-Ray Microdiffraction</li><li>Photocatalytic Activity of TiO₂ Modified by Heteropolytungstate Acid </li><li>Application of a Temperature-Compensating FBG Sensor to Strain Measurement</li><li>Precipitation Behavior of MN(M=V,Nb) Phase in the 7Cr-1.5Mo Ferritic Heat Resistant Steels</li><li>Dislocations in Phase-Change Ge₂Sb₂Te₅ Alloy</li><li>Explosion Bulge Test of High Srength Low Alloy Steel PFS-700 in Air and Underwater</li><li>Pb(Zr_0.95Ti_0.05)O₃ Powders Synthesized by PEG Modified Pechini Method: Characterization and Sintering Behavior</li><li>Nanostructural Characterization of Hydrothermally Stable ?-Alumina-Based Composite Materials by Transmission Electron Microscopy</li><li>Adhesion Promoter and Anti-Sticking Layer Effects on Adhesion Properties Using Symmetric AFM Probe</li><li>A Study of Mechanical Behavior of Au Films by Visual Image Tracing System</li><li>Effect of Cyclic Strain Rate on Environmental Fatigue Behaviors of SA508 Gr.1a Low Alloy Steel in 310 degreesC Deoxygenated Water </li><li>Effect of Processing Conditions of Dolomite on the Antiviral Activity</li><li>Fatigue Crack Growth Behaviors of AISI Type 347 Nuclear Piping Material</li><li>Hydrazine-Dependency of Low-Alloy Steel Flow-Accelerated Corrosion in a Deoxygenated Solution at 250 degreesC</li><li>Carbon Nanostructures by Using FeCl₃ as Catalyst Precursor</li><li>The Effect of Alloy Elements on Cyclic Fatigue Behavior of Bucket Candidate Materials for USC Power Plants</li><li>Evaluation of Corrosion Fatigue Crack Propagation Characteristics of TMCP Steel in Synthetic Seawater under Cathodic Protection</li><li>Application of Continuous Indentation Technique in Thermal Power Plant</li><li>Micro-Scratch Analysis on Adhesion between Thin Films and PES Substrate</li><li>Microstructure-Based Computational Simulation and Experimental Measurement of Stresses in Spheroidized Steels</li><li>Assessment of Behaviour Characteristics for Geobag Wall System Using Recycled Waste Concrete</li><li>Nanoindentation Characterization of Mechanical Properties of Ferrite and Austenite in Duplex Stainless Steel</li><li>Characterization of Solid Synthetic Fuel Derived from Physic Nut and Glycerol Waste Using Single Particle Reactivity Analysis</li><li>Characteristics of Residual Stress in P92 Steel Welds</li><li>AE Evaluation of Relationship between AE Signals and Fracture Mechanisms for the Weldment of Pressure Vessel Steel</li><li>Measurement of Residual Stress in Thin-Sized Steel Wires by Using Focused Ion Beam and Digital Image Correlation Method</li><li>Thermal Crack Propagation Behavior on Nitrided H13 Hot Work Die Steel</li><li>New Compositionally-Ordered GeSi Nano Dots Fabricated with 1250 keV Electrons</li><li>High-Resolution Dynamic Analysis of the Phase Transformation in Ge₂Sb₂Te₅ Alloy</li><li>Terrace Formation of SrTiO₃ (111) Substrates for Epitaxial Thin Film Growth with Various Etching Conditions</li><li>Microstructures and Growth Characteristics of Self-Assembled InAs/GaAs Quantum Dots Investigated by Transmission Electron Microscopy</li><li>Distribution Characteristics of Stress Corrosion Cracks in a Retired Steam Generator</li><li>A Study on the Evaluation of Characteristics and Useful Life Prediction of Rubber Component for Elevator Cabin</li><li>The Effect of Strain Rate on the Fracture Modes of Mg Alloys </li><li>The Evaluation of the Fatigue Life in Arc Welded Parts of SAPH45 Steels Using an Acoustic Emission Method</li><li>Development of a Fretting Wear Evaluation Method in the Nuclear Fuel Fretting by Using a Wear Scar Shape</li><li>Design of Electrical Panels of Naval Vessels for Improved Fatigue, Shock and Vibration Performance</li><li>A New Method for Nondestructive Evaluation of Mechanical Properties Using Instrumented Indentation Technique</li><li>Study on Assessing Safety of Materials with Defect by Thermal Image Camera</li><li>Mechanical Properties of Railway Wheel for Standard Reinforcement</li><li>Fatigue Life Evaluation of Pipe Welds in Power Plant Using Advanced Nondestructive Methods</li><li>Experimental Study of Interference Factors and Finite Element Simulation on Oil-Gas Pipeline Magnetic Flux Leakage Density</li><li>Thermophysical Behavior of Micro Void in ?-Via of Microelectronic Substrate during Reliability Test</li><li>Damage Index Comparison for a Composite Stiffened Panel Using Lamb Wave</li><li>Crack Initiation Factor by Impact Fretting Wear at INCONEL Alloy for Steam Generator Tube in Nuclear Power Plants</li><li>Spherulitic Structures in Bisphenol-A Polycarbonate Crystallized at High Pressure</li><li>HRTEM Observation of ?-Phase in Cu-Zn Alloy Annealed at Lower Temperature</li><li>Deformation and Corrosion Behavior of a High Purity Manganese Free AZ31 Magnesium Alloy</li><li>Effect of Cold-Rolling on Precipitation Phenomena in 316L Austenitic Stainless Steel</li><li>Femtosecond Laser Synthesis of High-Pressure Phases of Si</li><li>? Phase Forming on Surface Layer and Precipitating inside of a Ti-Mo Based Alloy Annealed in Air</li><li>Strain Aging of Heavily Drawn Pearlitic Steel Wires</li><li>Phase Changes in AISI 436L Ferritic Stainless Steel after Nitrogen Permeation Heat Treatment</li><li>The Effects of Si on the Nucleation Kinetics of Ferrite in Dual Phase Steels</li><li>Transmission Electron Microscopy (TEM) Observations of Phase-Separations of Gamma-Prime Precipitates in Ni-Al-Fe and Ni-Si-Fe Ternary Alloys</li><li>ECCI Observation of Dislocation Structure Formed around an Intergranular Fatigue Crack in Copper</li><li>Microstructures of Ni/Cu and Ni-Co/Cu Multilayers Produced by Electrodeposition Method</li><li>Friction Behavior of HVOF Thermal Spray Coating of Micron Size WC-Co Powder</li><li>Microstructures and Cavitation Erosion Resistance of Ni60/TiC Plasma-Clad Coating</li><li>Grain Boundary Character Distributions of Strain-Annealed 304 Stainless Steel </li><li>First Principles Study on the Adsorption of Alkali Metal on C(100)( 2x1)</li><li>Some Observations Regarding Erosion-Corrosion Performance of HVOF-Sprayed Cr₃C₂- NiCr and Cr₃C₂- NiCr-(25) WC-Co Coatings in Actual Boiler Environment</li><li>Joining of Aluminum Foam/Aluminum Metal by Spark Plasma Sintering Process</li><li>The Evolution of Surface Damage in Press-Fitted Shaft According to the Bending Stress </li><li>Pack Boronizing of a Co-Cr-W-C Alloy </li><li>Study on the Properties of Chromium Matrix Composite Plated with Nanosized Diamond Powders</li></ul>