Advances in Nanomaterials and Processing

Dependence of Thermal-Cycling-Induced Deformation on Passivation Morphology in Plastic-Encapsulated Microelectronic DevicesReliability of Electroplated Sn-37Pb Solder Bumps with Different Under Bump Metallizations (UBMs) during High Temperature Storage TestTemperature Dependence of Dominant Hillock Phases during Electromigration of Eutectic SnPb Solder LinesElectrical Properties of ZrO2 Capacitor Dielectrics Deposited by rf Magnetron SputteringRole of SrRuO3 Buffer Layers in Enhancing Resistance Changing of Pr0.7Ca0.3MnO3 FilmsElectrical Switching Characteristics of Nitrogen Doped Ge2Sb2Te5 Based Phase Change Random Access Memory CellBump Formation and Flip Chip Processes for RF System-on-PackagesDislocation-Free Shallow Trench Isolation (STI) Chemical Mechanical Polishing (CMP) Process for Embedded Flash MemoryDependency of Electrical Characteristics on Au Nano-Crystal Size for Non-Volatile Memory Fabricated with Au Nano-Crystal Embedded in PVK(Poly(N-Vinylcarbazole)) LayerThermal Stress Model for Phase Change Random Access MemoryImprovement of Surface Morphologies of Ru Thin Films by 2-Step MOCVD Process Using (2,4-Demethylpentadienyl)(Ethylcyclopentadienyl)Ruthenium and OxygenAEM Study on the Phase Transformation of Nickel Silicides in the Ni1-xTax/Si SystemEffects of Electroplating Parameters on the Defects of Copper via for 3D SiPSurface Acoustic Wave Device on (AlN/LGS) SubstrateInfluence of Structural Parameters to Engineer the Band Gaps in Ternary Pnictide Semiconductors - Theory as a ToolInitial Growth Mode of GaN Film on Stepped SapphireEtching Mechanism of ZnO Thin Films in Inductively Coupled PlasmaGrowth of Ga-Doped ZnO Bilayer by RF Magnetron Sputtering with Different AtmospheresFabrication of Flexible CIGS Solar Cell on Stainless Steel Substrate by co-Evaporation ProcessZnO Nanowalls and Nanocolumns Grown by Metalorganic Chemical Vapor DepositionElectroless Plated Pd/GaAs Schottky Diode and its Application to Hydrogen DetectionCharacteristics of Thermal Performance in High Power LED Package with Heat PipeDeep Level Defects in AlxGa1-xN/GaN Heterointerfaces Grown by Molecular Beam EpitaxyAtomic Arrangement and Formation Mechanism of c-Axis Oriented ZnO Thin Films Grown on p-Si SubstratesCharacteristics of Self-Aligned InP/InGaAs Heterojunction Bipolar Transistor Assisted by Silicon Nitride SidewallEffect of Buffer Thickness on the Formation of ZnO Nanorods Grown by MOCVDImprovement of the Reverse Characteristics of Ti/4H-SiC Schottky Barrier Diodes by Thermal TreatmentsFabrication of 4H-SiC Planar MESFETs on High-Purity Semi-Insulating SubstratesGrowth and Characterization of GaN Nano-Column Grown on Si (111) Substrate Using Au+Ga Alloy Seeding Method by MOCVDMulti-Component ZnO-In2O3-SnO2Thin Films Deposited by RF Magnetron Co-SputteringComparison of Semiconductor Radiation Detectors for Large Area X-Ray ImagingInterrelation between Strain Relaxation and InxAl1-xAs Compositional Graded Step Buffer Layers on GaAs Substrate Grown by Molecular Beam EpitaxyCharacteristics of Al-Doped ZnO Transparent Conductive Oxide Films for Solar Cell ApplicationsGrowth and Characterizations of Electrochemically Deposited ZnO Thin FilmsIron Nanostructures Fabricated by Electron Beam Induced Deposition and its Magnetic PropertiesMicrostructures and Dielectric Properties of CaCu3Ti4O12 Polycrystalline CeramicsEmbossing Lithography on Sticky Thermoset Polymer Using Ni TemplateEffect of Source Supply Methods on Low-Temperature Preparation of Lead Zirconate Titanate Thin Films Using SrTiO3 Seed Layers by Metallorganic Chemical Vapor DepositionRemoval of Slurry Residues in Tungsten Plug during Chemical Mechanical PlanarizationPiezoelectric Bimorph Microphone with Low Stress Parylene DiaphragmStable Deposition and Patterning of Metal Layers on the PDMS Substrate and Characterization for the Development of the Flexible and Implantable Micro ElectrodeElectrical Properties of Lead Zinc Niobate - Lead Zirconate Titanate Thick Films Formed by Aerosol Deposition ProcessMaterials Design with Enhanced Temperature Stability of Resonant Frequency for High Frequency ApplicationEpitaxial Growth and Anisotropic Dielectric Properties of La-Doped Bi4Ti3O12 Thin FilmsHigh Quality Epitaxial Pt Films Grown on ?-Al2O3/Si (111) SubstratesElectrical/Mechanical Properties of Porous Low-k Thin Films by Using Various Supramolecule Based PorogenThermal Properties of Cr- and Ni- Silicide Thin FilmsThe Effect of Substrate Temperature on the Formation of ITO Thin FilmsDome-Shaped High Power Transformer for Driving A 55 W PL LampEffects of CeO2 on the Piezoelectric Properties of PSN-PMN-PZT Composition under Various Alternating Electric FieldsEffect of ZnO Buffer Layer on the Structure of TiO2 Thin Film Deposited by Magnetron SputteringThe Growth of Transparent Conductive Al-Doped ZnO Thin Films at Room TemperatureTexture Evolution in the Sputtered and Electro-Deposited Cu Thin Films Using EBSD MethodApplication of Advanced Materials with a Metastable Phase on Functional Devices and Bio-SensorsPreparation and Characterization of SnO2 Thin Film Gas Sensor for NOx Gas for Environmental MonitoringFeasibility of Copper-Base Leadframe Preplated with a Cu-Sn Alloy instead of NiAnnealing Behavior after Ion Shower Doping for the Fabrication of LTPS-TFTsFabrication of Porous YSZ from ZnO-YSZ CermetStructural and Mechanical Properties of Low Dielectric Constant SiOC(-H) Films Using MTES/O2 Deposited by PECVDEffects of Firing Temperature and Film Thickness on the Critical Properties of YBCO Film by the '211 Process'Characteristics of SiO2 Film Grown by Atomic Layer Deposition as the Gate Insulator of Low-Temperature Polysilicon Thin-Film TransistorsElectronic Properties Carbon Film Using Chemical ProcessMicrostructural Study on the Wear Behavior of Cu-TiB2 Composites for Electrical Contact MaterialsStudy on Light Induced Leakage Current Related to Amorphous Silicon TFT DesignIndium Tin Oxide Film Characteristics after Chemical Mechanical Polishing Process with Control of Pad Conditioning TemperatureElectrical and Thermal Properties of Platinum Thin Films Prepared by DC Magnetron Sputtering for Micro-Heater of Microsensor Applications after CMP ProcessCharacteristics of Inductive Coupled Plasma with Internal Linear Antenna Using Multi-Polar Magnetic Field for FPD ProcessingFormation of High Flux Parallel Neutral Beam Using a Three Grid System of Ion Beam during Low Angle Forward Reflection of IonsNickel-Based Germanosilicide of Heavily-Doped SiGe Films for Low Resistance and High-Temperature StabilityEffect of Substrate Texture on Superconducting Properties of YBCO Thick FilmsStudy on the Synthesis and Characterization of PANi/Nano-CeO2 CompositesThe Effect of Bias Power on the Etching Rate and Uniformity of Silicon Dioxide for N-Slot Inductively Coupled Plasma in TFT ApplicationSurface Modification of Novel Organic-Inorganic Hybrid Dielectrics Using Self-Assembled MonolayersHeartbeat Monitoring Technique Based on Corona-Poled PVDF Film Sensor for Smart Apparel ApplicationFerroelectric P(VDF/TrFE) Ultrathin Film for SPM-Based Data Storage DevicesThe Effects of Current Type and Density on Dishing Phenomena in CMP ProcessNumerical and Experimental Study on Pulsed-Laser Heating Process of ZnO FilmsLuminescence of MWO4 (M =Ca, Sr, Ba and Pb) Prepared by Solvothermal ReactionA Study on Improved Characteristics of Electric Charge Storage after Thermal Treatment Using Teflon FEP FilmThe Hydrogen Heat Treatment Effect on Electrical and Structural Properties of a-SiOC:H as Low-k Thin FilmsA Method for Interpreting V-I Probe in a Capacitively Coupled Plasma DischargeDevelopment of Conductive Ceramic Composites by Preceramic PolymerHydrogen Plasma Process to Reduce the Eu-Doped Sr2SiO4 Thin FilmsEffect of Cu Dopant on the Electrical Property of ZnO Thin Films Deposited by Pulsed Laser DepositionProperties of Electrical Conductivity of Amorphous Tungsten-Doped Vanadium Oxide for Uncooled MicrobolometersBehavior of Various Organosilicon Molecules in PECVD Processes for Hydrocarbon-Doped Silicon Oxide FilmsEffect of Hydrogen on Electron Emission Characteristics of MgO for Plasma Display PanelDispersion of Glass Powder and Characterization of Thick Film for AC Plasma Display PanelsCobalt Thin Film Deposited by Remote Plasma Atomic Layer Deposition Method Using C12H10O6(Co)2 and CpCo(CO)2Electrical and Electrochromic Characterization of Poly (ethylene-oxide)/V2O5 Xerogel FilmsProperties of ITO Films Deposited on Plastic Substrate by RF Superimposed DC Magnetron Sputtering MethodAligned Polycrystalline Silicon Array Thin Film by XeCl Excimer Laser Annealing for AMOLED DisplaysImprovement of Luminescent Properties of Phosphor Powders Coated with Nanoscaled SiO2 by Atomic Layer DepositionEnhanced Luminescence Efficiency for Bi, Eu Doped Y2O3 Red Phosphors for White LEDsPentacene Organic Thin-Film Transistors with Dual-Gate StructurePrevention of Thin Film Failures for PECVD Amorphous-Si on Plastic SubstrateSpherical BaMgAl10O17:Eu2+ Phosphor Particles by Liquid Phase SynthesisCathodoluminescent Properties of Sol-Gel Derived Gd2O3:Eu Thin-Film Phosphors on Sapphire SubstratesCharacteristics of Amorphous Indium Zinc Oxide Anode Films on Polycarbonate Substrate for Flexible Organic Light Emitting DiodeOptical and Electrical Properties of ITO/Ag/ITO Multilayer Thin Films Deposited by D.C. Magnetron SputteringInstability of OTFT with Organic Gate DielectricsFailure Mechanism of Patterned ITO Electrodes on Flexible Substrate under Static and Dynamic Mechanical StressesInterface Reaction between Fillers and Phosphate Glass for Barrier Ribs in Plasma Display PanelCharacteristics of TAG:Ce Phosphor Particles Prepared by Ultrasonic Spray PyrolysisITO Contact Properties with Amorphous Silicon for AM-OLED ApplicationMolecular Ordering and the Current-Voltage Characteristics of m-MTDATA Thin FilmsMicrostructure and Electrical Properties of ITO Films Deposited Using Various ITO Targets by Magnetron SputteringChemical Durability of Frits Used in Process of Plasma Display PanelsProperties of Polymer Light Emitting Diodes with Blue Color on ITO/Glass SubstratesLuminance Efficiency of a (La,Tb,Ce)PO4:Eu Phosphor Layer Prepared with Binary Surface Active Organic MoleculesUniform Poly-Si TFTs for AMOLEDs Using Field-Enhanced Rapid Thermal AnnealingCharacteristics of Pentacene with Different Polymer Gate Insulators for Organic Thin-Film TransistorsThe Effects of SiO, SiON on IZO Thin Film Deposited by DCMG MethodSynthesis and Fabrication of Novel Polymeric/Organic Materials for Micro/Nano-Scale Optical Printed Circuit Board and VLSI Photonic Integrated Circuit ApplicationPost-Annealing Effect of SiON Thin Film in AirComparison of Natural Type Ia Diamond and CVD Diamond Films by PhotoluminescenceLuminescent Properties in NIR Region of LaPO4:Er/LaPO4 Core/Shell NanoparticlesLow Temperature O2 Plasma-Assisted Wafer Bonding of InP and a Garnet Crystal for an Optical Waveguide IsolatorPreparation and Property of Nonlinear Optical Materials Based on K2O-BaO-TiO2-SiO2 GlassesInvestigation of Thermal Measurement Variables in High Power GaN-Based LEDsPreparation and Characterization of 70TeO2-30WO3 Glass Thin Films by Radio-Frequency Magnetron Sputtering MethodDetection of Toxic Organophosphate Nerve Agents Using DBR Porous Silicon ChipFormation of Nanocrystallites in the nc-Si Films by Co-Sputtering Aluminium and SiliconPhosphor-Conversion White Light Emitting Diode Using InGaN Near-Ultraviolet ChipInductively Coupled Plasma Reactive Ion Etching of Ge-SiO2 and SiON Using C2F6 and NF3-Based Gas MixturesComparison of Amorphous Selenium and Mercuric Iodide Film for Diagnostic X-Ray ImagingEmbodiment and Luminescence Properties of Sr3SiO5:Eu(Yellow-Orange Phosphor) by Co-Doping LanthanideFabrication and Characterization of SiO2 Based Waveguide Co-Doped with Si-Nanocrystal and Er3+Wafer Level Bonding for LED Packaging Using Six Sigma Methodology Patterning of the Self-Assembled Monolayer Using the Zero Residual Nano-Imprint LithographyCeramic Coatings Deposited from Aqueous SolutionsOTS-Templated Cobalt Deposition Using Co2(CO)8 PrecursorSurface Characteristic of Ni-Based Amorphous Alloy Membrane for Hydrogen PermeationGrowth Kinetics and Formation of Uniform Self-Assembled InAs/GaAs Quantum Dots atNumerical Analysis of Self-Organizing Interconnection Process by 3 Dimensional Flow DynamicsGrowth Mode Diagram for the Epitaxial Growth on the Vicinal Surface of Strained Si (001)The Calculation of Adatom Diffusion Process on Si and Ge Surfaces from First-PrinciplesSynthesis of ZnO Flower-Like Nanostructures on GaN Epitaxial Layer by Hydrothermal ProcessFabrication of Antireflective Films Composed of High and Low Refractive Index Layers Using Layer-by-Layer Self-Assembly MethodSynthesis and Characterization of TMA-A Zeolite NanocrystalsFormation and Optical Properties of ZnSe Self-Assembled Quantum Dots in Cl-Doped ZnSe Thin Films Grown on GaAs (100) SubstratesSynthesis and Evaluation of Hollow-Tubular ZnO by Wet Chemical MethodSynthesis of ZnO Nanostructures by Thermal Evaporation on GraphiteSelf-Assembled Nanostructures of Block Copolymers on Random Copolymer BrushPhase Field Study for Self-Assemble of the Second Phase Particles in Coherent Phase TransitionLow Temperature Growth of ZnO Nanorod on Various Substrates by Solution Chemical MethodFabrication and Micropatterning of Conducting Polymer Nano-Films for Electronic DisplaysSynthesis and Nanophase-Separated Morphology of a Diblock Copolymer of Polypentafluorostyrene-b-Poly(methyl methacrylate) by Atom Transfer Radical PolymerizationElectrophoretic Self-Assembly of Sol-Gel Derived Silica MicrospheresResistive Switching Characteristics in TiO2 ReRAM with Top Electrode of Co Selectively Formed on SAMs Printed PatternsLocal Work Function Measurements on Various Inorganic Materials Using Kelvin Probe Force SpectroscopyEffects of Paraffin Addition on Optical Properties and Self-Assembly of SiO2 Photonic CrystalInfluence of Ion Bombardment of Sapphire on Electrical Property of GaN LayerIndustrial Applications of Sol-Gel TechnologyInterface Influence on the Proton-Conductivity of Ordered Mesoporous Silica MembranesHydrogen-Sensor Prepared Using Proton-Conducting Glass FilmsAl-Substituted Li[Li(1/3-x/3)Crx-0.05M0.05Mn(2/3-2x/3)]O2 Cathode Synthesized via Sol-Gel ProcessDirect Formation of Zn-Al Layered Double Hydroxide Thin Films Intercalated with Various Organic Anions through the Sol-Gel Method with Hot Water TreatmentFabrication of Pb-Free Silver Paste and Thick Film Adding Silver NanoparticlesNovel Preparation of Nano-Sized TiO2 and ZrO2 Particles by Nanocasting with Nanoporous SiO2 and Selective DissolutionSol-Gel Synthesis of GdAlO3 Buffer Layers on SrTiO3 (100) SubstratesThe Preparation of Fluorescent Nano Dye-Silica Particles by Sol-Gel ProcessEffect of Colloidal Silica Contents in the Organic-Inorganic Hybrid Coatings on the Physical Properties of the Film on the Metal SurfaceElectrical Properties BaTiO3 Thick Films with an Interlayer SrTiO3 Thin FilmsStructural and Dielectric Properties of Screen Printed PZT(70/30) Multilayered Thick FilmsEffect of Catalyst on the Colloidal Silica Particle Growth in Direct Oxidation of SiliconSynthesis of Silica Aerogel Thin Film from WaterglassInorganic Aerogel Granules Dried at Atmospheric-PressureSynthesis and Microstructure of Al2O3-SiO2 Nanoparticles by a Sol-Gel ProcessingGas Permeation Properties of Poly(N-Vinylpyrrolidone)/ 3-Aminopropyltriethoxysilane Hybrid MembranesFormation of Spherical and Rod-Shaped TiO2 Nanocrystals Prepared by Reverse Micelle MethodEffect of Ni Nano-Powders Addition on the Dielectric Properties of Ba(Ti,Zr)O3 Based Y5V CeramicsSurface Strengthening of Zirconia Toughened Alumina (ZTA) Using Glass Infiltration TechniqueMechanical Properties and Fabrication of Silicon Carbide Ceramic by NITE MethodElectric Field Induced Metal-Insulator Transition of Vanadium Dioxide Films on Sapphire Substrate Prepared by Inductively Coupled Plasma-Assisted SputteringRoles of Additives on Crystal Growth Rate of Precipitated Calcium CarbonateDensification Behavior and Microstructure Evolution of SiCf/SiC Composites Incorporated with In Situ Grown SiC NanowiresPreparation of Filling Materials for Antifouling Mineral Paint Using Rare Earth and their Anion Emission PropertiesStrength and Surface Morphology of Si3N4 Composite Ceramics Coated with SiO2 GelHydrothermal Synthesis of Nanosized Titania Photocatalysts Using Novel Water-Soluble Titanium ComplexesFacile Synthesis of SiCN Ceramic Foam via Self-Sacrificial Template MethodSintering and Oxygen Ionic Conducting Properties of Bi2V0.9Co0.1O5.5-d Derived from an EDTA-Citrate PrecursorLow Temperature Sintering in 95(Na0.5K0.5)NbO3-5LiTaO3 CeramicsPreparation of Ion-Sieve Type (H)[M0.5Mn1.5]O4 (M=Mg, Zn) and their Lithium Adsorption Properties in SeawaterDielectric Properties of Alumina Ceramics in the Microwave Frequency at High TemperaturePreparation and Characterization of Cordierite-Bonded Silicon Carbide Porous CeramicsSynthesis and Characterization of Ti3(Al1-n Gen)C2 by a Reactive Hot Pressing of TiCx, Al, and Ge Powder MixtureThermal Behavior of Carbon Nanotubes in Alumina Matrix NanocompositesSynthesis of Bio-Glass Ceramics in Na2O-CaO-SiO2-P2O5 System with Fluoride AdditivesWear Characteristics of Binary Mg-Al, Si, Zn Alloys Coated by Plasma Electrolytic Oxidation MethodEffect of Current Ratio on Plasma Electrolytic Oxide Coatings on Mg-Al AlloyPhotocatalytic Properties of Anodic TiO2 NanotubesDevelopment of Carbon Nanostructures in an Intermediate Prepared from Sol-Gel ProcessEffects of Deposition Parameters on the Crystallinities of CeO2 and Y2O3 Buffer Layers on Textured Ni Deposited by Magnetron SputteringEffect of Ceramic Powders on the Reaction Sintering of Ceramic/Metal Mixed PowdersElectronic Structure and Defect States of Transition Metal Doped Rutile TiO2Ceramic Electrode Materials for Electrostatic Chuck ApplicationsInvestigation of Scandia Stabilized Zirconia(ScSZ) - Yttria Stabilized Zirconia(YSZ) Composite Electrolyte for Intermediate Temperature Fuel CellsCharacteristics of La0.8Sr0.05Ca0.15CrO3 Interconnect Material for SOFC Synthesized by a Modified Pechini Method, USP, and GNPSealing Properties of Ceramic Fiber Composites for SOFC ApplicationHighly Sinterable Lithium Titanate Powders Fabricated by an Organic-Inorganic Solution RouteEffects of MgO Coating on Electrical Properties of BaTiO3The Effect of Initial Hydration Temperature on the Characteristics of Calcium Hydroxide and Aragonite Precipitated Calcium CarbonateOxidation Behavior of Tantalum Boride CeramicsRapid Transformation of a-Alumina Nanocomposite Powders by Microwave Assisted CombustionSimulation and Characterization for the Non-Linearity of Multilayer Ceramic Capacitors with New Equivalent Circuits under Ac-FieldEffect of Phase Transformation and Fine Particle Dispersion on Densification of High Purity Nanocrystalline ?-Phase Dispersed a-AluminaStudy on the Durability of E-Glass Fiber/Vinylester Resin Composites in Various EnvironmentProspects of Potential Semiconductor Spin DetectorsThe Effect of the Geometrical Shape and Size of the Cross Section on the Spin-Polarized Transport and the Giant Magnetoresistance: Finite Element Method AnalysisFirst Principle Calculations of the Magnetic Structures of 3d Transition Metals Doped GaNStructural and Microwave Properties of Fe-Based Nanopowders via Mechanochemical SynthesisLow-Temperature Synthesis of Ordered L10-FePtCu Nanoparticles with High CoercivityCrystallographic and Magnetic Properties of Sm2Fe17N3 Films Grown by RF Magnetron SputteringGlycothermal Synthesis and Magnetic Properties of YIG/YAG NanoparticlesMagnetic Patterning of the Ni/Cu Thin Film by 40 keV O Ion IrradiationMagnetic Properties and Microstructures of Fe73.5Si13.5B9Cu1Nb3 Alloy Crystallized in Nitriding-AtmosphereExcellent Response of Giant Magnetoimpedance Effect in a Glass-Coated Microwire LC-ResonatorMagnetic Properties of Various Thick Co-Fe Circular Dot ArraysMagneto-Optical Properties of Ce-Yttrium Iron Garnet Nanoparticles Dispersed in an Epoxy ResinFactors Influencing the Sensitivity of the CDMPI SensorMagnetic Properties of Mn-Zn Ferrite Nanoparticles Fabricated by Conventional Ball-MillingFunctionalization of Magnetite Nanoparticles for Protein ImmobilizationSynthesis of Monodisperse FePt Nanoparticles at a Low TemperatureThe Selective Protein Separations with Polyaminofunctionality on Controlled Silica Coating-Layers of Magnetic NanoparticlesStructure and Magnetic Properties of Nanocrystalline Pd-Co and Pd-Co-Fe LayersEdge Shape Effect on Switching Behavior in a Small Ferromagnetic PatternTi-Based Amorphous Alloys and Composites as Potential Candidate Materials for Energy ApplicationsDLC Film Coating on a Lithium Metal as an Anode of Lithium Secondary BatteriesAdvanced Manufacturing Concepts for Crystalline Silicon Solar Cells: Phosphorous Doping and Contact Opening ProcessPotential of Cr2AlC Ternary Carbide as Material for Bipolar Plate in PEMFCGrowth of Cu(In1-xAlx)Se2 Thin Films by Atmospheric Pressure Selenization of Sputtered PrecursorsDevice Performance of P3HT/C70-Methanofullerene Bulk-Heterojunction Polymer Photovoltaic CellsThermoelectric Properties of Co1-xFexSb3 Prepared by Encapsulated Induction MeltingNano Composite Membranes of Branched Sulfonated Poly(Ether Ketone Sulfone) and SiO2 for Fuel Cell ApplicationElectrochemical Performance of Activated Carbon Electrode Added with LiCoO2 for Hybrid CapacitorCatalytic Effect of Ti5Si3 on Dehydrogenation of NaAlH4Novel Low-Temperature Synthesis and Characterization of Lithium Cobalt Dioxide for Lithium Rechargeable BatteriesCharacterization of Cu(In,Ga)3Se5 Thin Film for Top Cell in CIGS Tandem Solar CellsApplication of Anodic Titanium Oxide to Dye-Sensitized Solar CellsElectrodeposition of CdS Nanostructures for Solar Cells Using Nano Imprint TemplatesEffect of Various Lithium Salts in TEGDME Based Electrolyte for Li/Pyrite BatteryFormation of CuIn1-xAlxSe2 Thin Films by Selenization of Metallic Precursors in Se VaporMicrostructure Analysis and Characterization of Li(NiCoMn)O2 Thin Film for Cathode Application Prepared by Li Diffusion on the Ni-Co-Mn Alloy SubstratesEffects of Se Atmosphere on the Densification of Absorber Layer Using Cu(In,Ga)Se2 Nanoparticles for Solar CellsPorous Silicon Layer by Electrochemical Etching for Silicon Solar CellThe Activation and Hydrogen Sorption Characteristics of Zr57V36Fe7 Alloy and its Constituent PhasesElectrochemical Comparison of Chemically or Physically Modified Natural Graphite Anode for Lithium-Ion BatteriesCharacteristics of Indium Zinc Oxide Thin Films Deposited by Radio Frequency Reactive Magnetron Sputtering for Solar Cells ApplicationPreparation and Reactivity Test of Nano Size ZnO for Removal of H2S and COS in a Gasified Fuel GasThe Influence of Polymer Content on Electrochemical Properties of Si ElectrodeStructural and Electrochemical Evaluation of a Si Film Electrode Fabricated on a Ni Buffer LayerThe Effect of ZnO:Al Sputtering Condition on a-Si:H / Si Wafer Heterojunction Solar CellsThermoelectric Properties of Zn4-xSb3 with x=0~0.5Electrochemical Properties of Al Doped Li(Ni1/3Co1/3Mn1/3)O2Fabrication of Hybrid Solid Electrolyte by LiPF6 Liquid Electrolyte Infiltration into Nano-Porous Na2O-SiO2-B2O3 Glass MembraneCharacteristics of Lithium Polysilicate Electrolyte Synthesized by Sol-Gel ProcessingAg Deposition on Si-C Composite Anodes for Lithium Ion BatteriesElectrochemical Behaviors of PtRu/CNTs Catalysts Prepared by Pulse Potential Plating MethodsThe Effect of Oxygen Pressure on the Synthesis of LiNiO2The Effect of SnOx as the Protective Layer for the Lithium Manganese Oxide Thin FilmPerformance of Tin Oxide/Graphite Composite Anode for Lithium Ion BatteryPreparation and Electrochemical Evaluation of La1-xSrxMnO3 Cathode Material for Zinc Air Secondary Batteries ApplicationSynthesis of Nanosized TiO2-Ag-SiO2 Sols by Modified Sol-Gel Method and their Application for Methane Hydrate FormationA Study on the Effect of Structure and P-Doping of Si Thin Film as an Anode for Lithium Rechargeable BatteriesThe Reinforcement Destruction Simulation of an Al-Zn Carbon Fibers CompositeFabrication of SiCf/SiC Composite by the PIP Process with Electron Beam Curing MethodLow Temperature Sintering of AlN-SiC-TiB2 System for the Fabrication of Continuous Fiber Reinforced Ceramic Composites (CFCC)Study on Thermal Conductivity of Polyetheretherketone/Thermally Conductive Filler CompositesSynthesis and Electrorheological Characteristics of Conducting Polymer/Clay NanocompositesConductive Sol-Gel Hybrid Materials for Novel Cofactor Regeneration in BiocatalysisDevelopment of Ultrasonic-Polarized Mechanism for Stacking Orientation of Quasi-Isotropy Composite LaminatesImpregnation of Eicosane into Polyester Fiber Using Supercritical Carbon DioxideFabrication of Metal/Intermetallic Compound Laminate composites by Thin Foil Hot Press ProcessSingle Crystal PMNT/Polymer 1-3-2 Piezoelectric CompositesFabrication of Polymer Nanotubes Using Alumina TemplateFabrication and Microstructure Control of Continuously Porous Ceramics with Al2O3-(m-ZrO2) and t-ZrO2 Multilayer ShellStructures and Physical Properties of Multi-Walled Carbon Nanotube-Filled PVDF Thermoplastic CompositesWear Behaviors of Al/Al2O3 Composite Coatings Fabricated by Thermal Spray ProcessFabrication of Carbon Nanotube Embedded Nylon Nanofiber Bundles by ElectrospinningSynthesis of Polymer/Silica Hybrid Nanocomposites Prepared by the Sol-Gel MethodPreparation and Characterization of Multiwalled Carbon Nanotube/Poly(e-Caprolactone) Composites via In Situ PolymerizationEffect Of Al2O3 Particle Size on Compressive Behavior of Al CompositesThe Preparation of Bone-Mimetic Sol-Gel Nanoporous Scaffold of L3-Phase Silica/HydroxyapatiteThe Improvement of Chemical and Mechanical Properties of Al/Cu-Coated SiC CompositesOne Step Synthesis and Consolidation of Nanostructured ZrSi2-SiC Composite and its Mechanical PropertiesMechanical Properties and Consolidation of WC-8wt.%Ni Hard Materials by HFIHS and PCASMaterials for Devices in Life Science ApplicationsStrength and Reliability Performance of Hydroxyapatite Coatings on Titania Treated Ti6Al4V Alloy Using Sol-Gel PrecursorPreparation of Titanium Oxide Nanotube by Hydrothermal ProcessLarge Area Synthesis of 1-D ZnO Nanostructure Arrays on Zn Substrate via Solvothermal ProcessCharacteristics of Gas Sensors Based on Single-Walled Carbon Nanotube Bundles Treated by Acid StirringHydrothermal Synthesis of Noble Metal Loaded Tin Oxide Sol Solution for Gas Sensor ApplicationControl of Microstructures and Textures in Nanocrystalline Fe-50wt%Ni FoilSynthesis of High Concentration Cuprous Oxide Nanoparticles by Modified Polyol ProcessLarge-Scale Synthesis of Polymer-Stabilized Silver NanoparticlesPreparation of Nickel Nanoparticles in Water-in-Oil MicroemulsionChemically Driven Polyacrylonitrile Fibers as a Linear ActuatorMorphological Evolution of Silicon Nanowires Grown by Chemical Vapor DepositionEffect of Surfactant on the Morphology of Silver NanoparticlesChemical Durability and Anti-Microbial Property of Silver-Doped Colloidal SilicaThickness Dependence of the Crystallization of a-Fe2O3/a-Al2O3(0001) Thin Films Grown by SputteringFabrication of Nano-Sized Indium Oxide Powder below 50nm by Spray Pyrolysis ProcessNano Structured Silica Aerogel Films by Dip-Coating ProcessProperties of TiC and TiCN Nanoparticles Fabricated by a Magnesium Thermal Reduction ProcessPreparation and Characterization of CdSe Nanoparticles Synthesized Using the Ultrasonic IrradiationTEM Analysis of Multilayered Co/Cu Nanowire Synthesized by DC ElectrodepositionGrowth of Carbon Nanotubes by Evaporating Ethanol as Carbon SourceThe Novel Methods for Preparing Antibacterial Fabric Composites Containing Nano-MaterialEffects of Concentration of Catalyst Precursors on Carbon NanostructuresA New Insight into the Mechanistic Study on Synthesis of Silica NanospheresProperty of NOx Gas Sensor Using Carbon Nanotube Prepared by Thermal CVD MethodAdsorption Characteristics of Uranyl Ions on Carboxymethylated Polyethyleneimine (CM-PEI) / Activated Carbon CompositesThe Effect of DC Bias Voltage on the Structural and Optical Properties of Hydrogenated Nanocrystalline Si Thin FilmsSolvothermal Preparation of Nano-Sized CaWO4 ParticlesNano-Imprinted Ultrahigh-Density Nanopore ArraysFabrication of Porous Al2O3 and TiO2 Thin Film Hybrid Composite Using Atomic Layer Deposition and Properties StudySynthesis and Characterization of Bioactive Sodium Titanate Nanotube by Alkali Hydrothermal TreatmentActivation and Gas Sorption Properties of Nano-Size Titanium Powder GettersSynthesis and Characterization of PbSe Nanocrystals by a Microchannel ReactorSnO2 Nanostructures Synthesized on Co SubstratesSinterbility and Mechanical Properties of Zirconia Nanoparticles Prepared by Hydrothermal ProcessPhase Transition of Titania Nano-Materials Controlled by Hydrothermal MethodFabrication of Size Controlled Nanohole Array on III-V Semiconductor Substrate by ICP-RIE Using Nanoporous Alumina MaskEffect of Nanoscale Multilayered Structurization on Hardness and Wear Resistance in Al-Cr-N CoatingCarbon Nanotube Gas Sensor Fabricated on Anodic Aluminum OxideEffect of Adhesive Thickness and Bonding Length on Behavior of Composite Adhesive Joints Subject to TorsionEffect of Cell Size on the Dynamic Compressive Properties of Aluminum Alloy FoamsFatigue Crack Propagation Behavior of Friction Stir Welded 6061-T651 Al AlloyMechanical Behaviors of Ultrafine Grained Metallic MaterialsEffect of Vibration during Welding on the Fatigue Strength of Structural Steel WeldmentsTEM & EBSD Study on Deformation Behavior of High Nitrogen Austenitic Fe-18Cr-18Mn-2Mo-0.9N Stainless SteelEffects of Rough Surface on Contact Depth for Instrumented Microindentation Using Spherical IndenterEffect of Multipass Severe Rolling Process in the API X65 SteelLow Temperature Effects on the Fracture Behavior of Cold-Worked STS 304 Stainless Steel for Membrane of LNG Storage TankHertzian and Nanoindentations on EBPVD-Coated Gadolinium Zirconate Thermal Barrier MaterialsMicrostructural Evaluation and Mechanical Properties of Al2O3/ZrO2 Layered Structure with Graded InterlayersTensile Properties of Friction Stir Welded AZ31B Mg AlloyInfluence of Thixoextrusion Parameters on Mechanical Properties of Thixoextruded 7075 Al Wrought AlloyHigh Temperature Deformation Behavior of M2 High-Speed Tool SteelFatigue Behavior of Thin Cu Foils for Flexible Printed Circuit BoardDifference in Annealing Characteristics of Nanostructured Copper Alloys Processed by Accumulative Roll BondingEffects of Oxygen on Phase Stability and Mechanical Properties of Quenched Ti-Nb AlloysAssessment of Tensile and Fatigue Damage in 316L Stainless Steel by Acoustic Emission TechniqueFatigue Crack Growth of Ultrafine Grained Pure Ti after Severe Plastic DeformationTribological Characteristics of Coarse and Ultra-Fine Grained Ferrite-Martensite Dual Phase Steel Fabricated by Equal Channel Angular PressingMicrostructural Evolution during Annealing of 5052 Al Alloy Deformed at Cryogenic TemperatureInfluence of ECAP Routes on the Microstructure and Mechanical Properties of Hot Extruded 3003 Al AlloyEffect of Heat Treatment on the Tensile Properties of Poly-Crystal and DS CM247LC AlloyEffect of Minor Elements on the Grain Boundary Strengthening of a Single Crystal Superalloy RR2072Effects of Surface Coating on Wear Properties of A356-20vol.%SiCp CompositesChange of Mechanical Properties of FM Steels after Thermal AgingEffect of Heat Treatment on Compressive Properties of Open Cell Aluminum FoamsEffects of Mischmetal Addition on the Microstructural Characteristics of BCuP-2 Brazing Filler MetalObservation of Dynamic Behavior in Primer-Coated Steel Welding by CO2 LaserSolid State Diffusion Bonding of Titanium AlloysThe Heat Treatment Characteristics of Hydroxyapatite Thin Films Deposited by RF SputteringEffect of Post-ECAP Aging on Mechanical Properties of Age-Hardenable Aluminum AlloysInvestigation on the Microstructure of an 11% Cr Martensitic Steel with TitaniumMicrostructure Changed during Accumulative Roll Bonding of Al/Mg CompositeTitanium Alloys Casting for Structural ApplicationThe Effects of Processing Temperature and Time on the Surface Properties of Plasma Radical Nitrided SCM 440 SteelIdentification of Precipitates Appearing in Al-Li-Cu-Zr AlloyMechanical Properties of Si3N4 Ceramics Prepared by Nitrided Pressureless Sintered (NPS) ProcessA Characteristics Study of FeAlCr Intermetallic Compound Manufactured by Osprey Forming ProcessEffect of Silver Additions on the Ageing Behavior and Mechanical Properties of Mg-Al-Si-Sn-Sr AlloyCharacteristics of U and U-7wt%Mo Polycrystalline Foils Cast by Alternative Fabrication MethodThermotransport of Hydrogen in Zr-1.0Nb-1.0Sn-0.1Fe AlloyDevelopment of Environment-Friendly CaO Added AZ31 Mg AlloyMicrostructural Evolution in CuAlNi Alloy with AgeingThe Effect of Bubbling and AlCuP for Refining Primary Silicon at Al-18%Si AlloyTexture and Microstructure in Ni-W Alloy Tape Manufactured by the Powder Metallurgy ProcessFormation of Ferrite with Cr Equivalents and Solidification Rates in Mod. (9-12)Cr-1Mo SteelsFormation of a Crystalline-Glass Composite in a Cu-Based Bulk Metallic Glass by Using the Cu-Pb Monotectic SystemMC Carbide Decomposition during Thermal Exposure of Polycrystalline Ni-Base SuperalloysProperties of Preferred Orientation of TiO2 Thin Film on Plasma Pretreated SubstrateEffect of Heat Treatment on Characterizations of TiCrN Coated Layer by R.F Magnetron SputteringMicrostructure and Mechanical Properties of Mg-Zn-Y Alloys Fabricated by Rapid Solidification and Spark Plasma Sintering ProcessesMicrostructure and Compression Properties of Al-8Fe-2Mo-2V-1Zr Alloys Produced by Extrusion of Melt-Spun PowdersAqueous Dispersion of ZrB2 Powder - Effect of Surface Corrosion and DispersantGrowth Model of Circumferential Outer Diameter Stress Corrosion Crack in Retired Steam Generator Tube of Kori 1 Nuclear Power PlantEffect of Delta Ferrite on Corrosion Resistance of Type 316L Stainless Steel in Acidic Chloride Solution by Micro-Droplet CellA Study on Corrosion-Resistant Properties of Unleaded Bi-Containing Automotive Epoxy PrimersTribological Behavior and Surface Chemistry Characteristics of Quasicrystal CoatingsElectrochemical Interpretation of a Stress Corrosion Cracking of Thermally Treated Ni Base Alloys in a Lead Contaminated WaterApplication of Taguchi Method for Optimization of Vacuum Plasma Sprayed CoNiCrAlY CoatingsCorrosion Protection of Aluminum Data Line in TFT-LCD Using Chemical Conversion CoatingInfluences of Si, W, and Cu on the Localized and Stress Corrosion of 18 % Cr Austenitic Stainless SteelEffects of Pretreatment on the Etch Pit Formation during the Electrochemical Etching of AluminumStudy on Nickel Ferrite Formation by Using a Simple Method to Simulate Heat Transfer SurfaceBonding Strength of Top Coat and its Fracture Mechanism in Thermal Barrier Coatings with Thermal FatigueThe Sliding Wear Behavior of Titanium Carbide Dispersion-Reinforced SteelFabrication and Characterization of Al-Fe Coating for the Wet-Seal Area of Separator for Molten Carbonate Fuel Cells (MCFC) by the Laminating of Al FoilSurface Modification and Heat Treatment of Ti Rod by Electro DischargeCorrosion of Silicate Glasses and Glass-Ceramics Containing EAF Dust in Acidic SolutionNickel Tungsten Alloy Electroplating for the High Wear Resistant Materials ApplicationsAdhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching(RIE)In2O3 Thin Films Prepared on TiAlN Substrates Using a Triethylindium and Oxygen MixtureMicrostructures and Tribological Properties of Plasma Arc Sprayed Al-Fe-Cr-Ti Quasicrystalline CoatingsVariation of Corrosion Resistance and Hardness with Heat Treatment of ALDC8 Al AlloyImpact and Indentation Resistance of Superhard AlCrN Thin FilmsShielding Effectiveness Simulation of Brass-Iron Sandwich FilmsThe Effects of Si and Deformation on the Phase Transformation in Dual Phase SteelsCharacteristics of 2.45GHz Microwave Plasma by Langmuir Probe MeasurementsAn Ab Initio Study of the Energies of Coherent Interfaces Formed between bcc Iron and Carbides or Nitrides of Transition MetalsCompeting Ion Effect of Stabilization by Cr(III) & Cr(VI) in Ettringite Crystal StructureMicroscratch Analysis and Interfacial Toughness of Catalyst Coating on Electrolyte Polymer in Micro Fuel CellsA Method for the Evaluation of Heat Transfer Coefficient by Optimization AlgorithmCharacterization of Anisotropic and Irregularly-Shaped Materials by High-Sensitive Thermal Conductivity MeasurementsDimensional Characteristics of Products Using Rotary Swaging Machine with Four-DiesCooling and Heating Characteristics of Ti-Ni Based Shape Memory Alloy Wire ActuatorsX-Ray Anomalous Scattering Studies of Fe-Tb Amorphous Thin FilmsEncapsulation of H2 Molecules in Cs3Na9-A Zeolite: A Theoretical ApproachCoarsening of MX Nitrides in Cr-Mo-N-X(X=V,Nb,Ti) Ferritic SteelsEXAFS Analyses on Local Structure of Gallium in Amorphous Selenide Optical Materials Doped with Rare EarthsAnalysis on the Martensitic Transformation in the Ti-xNb Alloys Using a Phenomenological TheoryMechanical Strength and Microstructural Characterization of SUS304 Brazed Joints with BNi-2 Filler Metal: Influence of Brazing Temperature and TimeCharacterization of a-Se(As:Cl) Film for Phosphor Coupled X-Ray Light ModulatorsAb Initio Study with Transition State Theory (TST) for the Calculation of the Barrier Height of Migration Energy of Neutral Indium in SiliconEffects of Thermal Annealing on the Atomic Structure of ta-C Films Using Molecular Dynamics StudyObservation of an Interlayer in a Nano-Scale SiO2 Layer on Si Substrate by X-Ray Reflectivity (XRR) AnalysisGrand Canonical Monte Carlo Simulations for the Prediction of Adsorption Capacity of Hydrogen in MOFsEffect of Curvature on Gas-Particle Flow in Converging and Diverging Supersonic NozzleMeasurement of Mechanical Properties for Thin Film Using Visual Image Tracing MethodEstimation for Nd-Fe-B Melt-Spun Powder QualityEncapsulation of Municipal Solid Waste Incineration Bottom Ash to Immobilize Cu and Pb via Carbonation ReactionModification of V2O5-WO3/TiO2 Catalysts Supported on SiC Filter for NO Reduction at Low TemperaturePreparation and Stabilization of Chitosan-Lipase Composite within Mesoporous Silica MaterialFabrication of Lotus-Type Porous NiAl and Ni3Al Intermetallic CompoundsPore Morphology of Lotus-Type Porous Copper Fabricated by Continuous Casting TechniqueGold Nanowire-Network Structure Prepared from Metallic Gold Nanowires Deposited in Polycarbonate Template MembraneNanoporous SiC Membrane Derived from Preceramic PolymerMechanistic Aspects of Ethylbenzene Dehydrogenation with CO2 over K2O/B2O3 -TiO2 - ZrO2 Bi-Functional CatalystsEffect of Method of Preparation of Cu-Zn-Al Catalysts on DME SynthesisHeterogeneous Photocatalytic Degradation of Chlorophenols over Ag-TiO2 Nano Particles in an Aqueous SuspensionNano-Sized Au/CeO2 Catalysts for Total and Selective CO OxidationPerformance of Immobilized Quaternary Salt Catalysts in the Synthesis of Dimethyl Carbonate from Propylene Carbonate and MethanolCatalytic Cracking of LLDPE over MCM-48Synthesis and Catalytic Application of Mesoporous Molecular Sieves MCM-41 Containing Niobium and TantalumPreparation of Silica-Supported Nickel Molybdenum Phosphides by Temperature-Programmed Reduction TechniqueChemical Vapor Deposition of Pt Nano Particles on Carbon NanotubesInfluence of Electrolytic Mediums on Microstructure of Anodic Titania FilmTi Oxide Films Formed by an Anodizing Process for Use in Dental ImplantsPt(IV) Adsorption Characteristics of Nanoporous Carbons Modified with Carboxymethylated PolyethyleneimineMicrowave-Assisted Heterogeneous Transfer Hydrogenation of KetonesA Study of Hydroxyapatite Coating on Porous Ti Compact by Electrostatic Spray DepositionPhotocatalytic Hydroxylation of Phenol over Ti-Containing Zeolites (TS-1, Ti-MCM-41)Characterization and Acid Catalytic Properties of NiO Supported on ZrO2 and Modified with MoO3Characteristics of Al Foam with High Porosity by Melt Foaming MethodDry Wear Properties of Porous Copper Fabricated by Unidirectional SolidificationChiral (Salen) Complexes Encapsulated in Mesoporous ZSM-5 as an Optical Active Catalyst for Asymmetric Phenolic Ring Opening of Terminal EpoxidesFerroelectric Nanotube Arrays in Hexagonally Ordered Pores of Aluminum OxideSynthesis and Photocatalytic Activity of TiO2 Nanoparticles Loaded on the Fluorine-Modified Hydrophobic Mesoporous SilicaElectrochemical Characteristics of Carbon-Supported Metal Nanoparticles Catalysts Prepared by Electrical Deposition MethodsInvestigation on the Sound Absorption and Transmission for Aluminum Foam and its CompositeStructural Features and Microwave Properties of Ba0.5Sr0.5TiO3 Films Grown on Sapphire SubstratesSynthesis of Dense Mesoporous Silica with High Surface Area by Hydrothermal Hot-Pressing (HHP) MethodAdsorption Properties of Activated Carbon Fibers Characterized by Electric DecompositionA Study on Al-Mg Alloy Foams by Melt Foaming Method