Advances in Nanomaterials and Processing

Committees
Preface
Dependence of Thermal-Cycling-Induced Deformation on Passivation Morphology in Plastic-Encapsulated Microelectronic Devices
Reliability of Electroplated Sn-37Pb Solder Bumps with Different Under Bump Metallizations (UBMs) during High Temperature Storage Test
Temperature Dependence of Dominant Hillock Phases during Electromigration of Eutectic SnPb Solder Lines
Electrical Properties of ZrO2 Capacitor Dielectrics Deposited by rf Magnetron Sputtering
Role of SrRuO3 Buffer Layers in Enhancing Resistance Changing of Pr0.7Ca0.3MnO3 Films
Electrical Switching Characteristics of Nitrogen Doped Ge2Sb2Te5 Based Phase Change Random Access Memory Cell
Bump Formation and Flip Chip Processes for RF System-on-Packages
Dislocation-Free Shallow Trench Isolation (STI) Chemical Mechanical Polishing (CMP) Process for Embedded Flash Memory
Dependency of Electrical Characteristics on Au Nano-Crystal Size for Non-Volatile Memory Fabricated with Au Nano-Crystal Embedded in PVK(Poly(N-Vinylcarbazole)) Layer
Thermal Stress Model for Phase Change Random Access Memory
Improvement of Surface Morphologies of Ru Thin Films by 2-Step MOCVD Process Using (2,4-Demethylpentadienyl)(Ethylcyclopentadienyl)Ruthenium and Oxygen
AEM Study on the Phase Transformation of Nickel Silicides in the Ni1-xTax/Si System
Effects of Electroplating Parameters on the Defects of Copper via for 3D SiP
Surface Acoustic Wave Device on (AlN/LGS) Substrate
Influence of Structural Parameters to Engineer the Band Gaps in Ternary Pnictide Semiconductors - Theory as a Tool
Initial Growth Mode of GaN Film on Stepped Sapphire
Etching Mechanism of ZnO Thin Films in Inductively Coupled Plasma
Growth of Ga-Doped ZnO Bilayer by RF Magnetron Sputtering with Different Atmospheres
Fabrication of Flexible CIGS Solar Cell on Stainless Steel Substrate by co-Evaporation Process
ZnO Nanowalls and Nanocolumns Grown by Metalorganic Chemical Vapor Deposition
Electroless Plated Pd/GaAs Schottky Diode and its Application to Hydrogen Detection
Characteristics of Thermal Performance in High Power LED Package with Heat Pipe
Deep Level Defects in AlxGa1-xN/GaN Heterointerfaces Grown by Molecular Beam Epitaxy
Atomic Arrangement and Formation Mechanism of c-Axis Oriented ZnO Thin Films Grown on p-Si Substrates
Characteristics of Self-Aligned InP/InGaAs Heterojunction Bipolar Transistor Assisted by Silicon Nitride Sidewall
Effect of Buffer Thickness on the Formation of ZnO Nanorods Grown by MOCVD
Improvement of the Reverse Characteristics of Ti/4H-SiC Schottky Barrier Diodes by Thermal Treatments
Fabrication of 4H-SiC Planar MESFETs on High-Purity Semi-Insulating Substrates
Growth and Characterization of GaN Nano-Column Grown on Si (111) Substrate Using Au+Ga Alloy Seeding Method by MOCVD
Multi-Component ZnO-In2O3-SnO2Thin Films Deposited by RF Magnetron Co-Sputtering
Comparison of Semiconductor Radiation Detectors for Large Area X-Ray Imaging
Interrelation between Strain Relaxation and InxAl1-xAs Compositional Graded Step Buffer Layers on GaAs Substrate Grown by Molecular Beam Epitaxy
Characteristics of Al-Doped ZnO Transparent Conductive Oxide Films for Solar Cell Applications
Growth and Characterizations of Electrochemically Deposited ZnO Thin Films
Iron Nanostructures Fabricated by Electron Beam Induced Deposition and its Magnetic Properties
Microstructures and Dielectric Properties of CaCu3Ti4O12 Polycrystalline Ceramics
Embossing Lithography on Sticky Thermoset Polymer Using Ni Template
Effect of Source Supply Methods on Low-Temperature Preparation of Lead Zirconate Titanate Thin Films Using SrTiO3 Seed Layers by Metallorganic Chemical Vapor Deposition
Removal of Slurry Residues in Tungsten Plug during Chemical Mechanical Planarization
Piezoelectric Bimorph Microphone with Low Stress Parylene Diaphragm
Stable Deposition and Patterning of Metal Layers on the PDMS Substrate and Characterization for the Development of the Flexible and Implantable Micro Electrode
Electrical Properties of Lead Zinc Niobate - Lead Zirconate Titanate Thick Films Formed by Aerosol Deposition Process
Materials Design with Enhanced Temperature Stability of Resonant Frequency for High Frequency Application
Epitaxial Growth and Anisotropic Dielectric Properties of La-Doped Bi4Ti3O12 Thin Films
High Quality Epitaxial Pt Films Grown on ?-Al2O3/Si (111) Substrates
Electrical/Mechanical Properties of Porous Low-k Thin Films by Using Various Supramolecule Based Porogen
Thermal Properties of Cr- and Ni- Silicide Thin Films
The Effect of Substrate Temperature on the Formation of ITO Thin Films
Dome-Shaped High Power Transformer for Driving A 55 W PL Lamp
Effects of CeO2 on the Piezoelectric Properties of PSN-PMN-PZT Composition under Various Alternating Electric Fields
Effect of ZnO Buffer Layer on the Structure of TiO2 Thin Film Deposited by Magnetron Sputtering
The Growth of Transparent Conductive Al-Doped ZnO Thin Films at Room Temperature
Texture Evolution in the Sputtered and Electro-Deposited Cu Thin Films Using EBSD Method
Application of Advanced Materials with a Metastable Phase on Functional Devices and Bio-Sensors
Preparation and Characterization of SnO2 Thin Film Gas Sensor for NOx Gas for Environmental Monitoring
Feasibility of Copper-Base Leadframe Preplated with a Cu-Sn Alloy instead of Ni
Annealing Behavior after Ion Shower Doping for the Fabrication of LTPS-TFTs
Fabrication of Porous YSZ from ZnO-YSZ Cermet
Structural and Mechanical Properties of Low Dielectric Constant SiOC(-H) Films Using MTES/O2 Deposited by PECVD
Effects of Firing Temperature and Film Thickness on the Critical Properties of YBCO Film by the '211 Process'
Characteristics of SiO2 Film Grown by Atomic Layer Deposition as the Gate Insulator of Low-Temperature Polysilicon Thin-Film Transistors
Electronic Properties Carbon Film Using Chemical Process
Microstructural Study on the Wear Behavior of Cu-TiB2 Composites for Electrical Contact Materials
Study on Light Induced Leakage Current Related to Amorphous Silicon TFT Design
Indium Tin Oxide Film Characteristics after Chemical Mechanical Polishing Process with Control of Pad Conditioning Temperature
Electrical and Thermal Properties of Platinum Thin Films Prepared by DC Magnetron Sputtering for Micro-Heater of Microsensor Applications after CMP Process
Characteristics of Inductive Coupled Plasma with Internal Linear Antenna Using Multi-Polar Magnetic Field for FPD Processing
Formation of High Flux Parallel Neutral Beam Using a Three Grid System of Ion Beam during Low Angle Forward Reflection of Ions
Nickel-Based Germanosilicide of Heavily-Doped SiGe Films for Low Resistance and High-Temperature Stability
Effect of Substrate Texture on Superconducting Properties of YBCO Thick Films
Study on the Synthesis and Characterization of PANi/Nano-CeO2 Composites
The Effect of Bias Power on the Etching Rate and Uniformity of Silicon Dioxide for N-Slot Inductively Coupled Plasma in TFT Application
Surface Modification of Novel Organic-Inorganic Hybrid Dielectrics Using Self-Assembled Monolayers
Heartbeat Monitoring Technique Based on Corona-Poled PVDF Film Sensor for Smart Apparel Application
Ferroelectric P(VDF/TrFE) Ultrathin Film for SPM-Based Data Storage Devices
The Effects of Current Type and Density on Dishing Phenomena in CMP Process
Numerical and Experimental Study on Pulsed-Laser Heating Process of ZnO Films
Luminescence of MWO4 (M =Ca, Sr, Ba and Pb) Prepared by Solvothermal Reaction
A Study on Improved Characteristics of Electric Charge Storage after Thermal Treatment Using Teflon FEP Film
The Hydrogen Heat Treatment Effect on Electrical and Structural Properties of a-SiOC:H as Low-k Thin Films
A Method for Interpreting V-I Probe in a Capacitively Coupled Plasma Discharge
Development of Conductive Ceramic Composites by Preceramic Polymer
Hydrogen Plasma Process to Reduce the Eu-Doped Sr2SiO4 Thin Films
Effect of Cu Dopant on the Electrical Property of ZnO Thin Films Deposited by Pulsed Laser Deposition
Properties of Electrical Conductivity of Amorphous Tungsten-Doped Vanadium Oxide for Uncooled Microbolometers
Behavior of Various Organosilicon Molecules in PECVD Processes for Hydrocarbon-Doped Silicon Oxide Films
Effect of Hydrogen on Electron Emission Characteristics of MgO for Plasma Display Panel
Dispersion of Glass Powder and Characterization of Thick Film for AC Plasma Display Panels
Cobalt Thin Film Deposited by Remote Plasma Atomic Layer Deposition Method Using C12H10O6(Co)2 and CpCo(CO)2
Electrical and Electrochromic Characterization of Poly (ethylene-oxide)/V2O5 Xerogel Films
Properties of ITO Films Deposited on Plastic Substrate by RF Superimposed DC Magnetron Sputtering Method
Aligned Polycrystalline Silicon Array Thin Film by XeCl Excimer Laser Annealing for AMOLED Displays
Improvement of Luminescent Properties of Phosphor Powders Coated with Nanoscaled SiO2 by Atomic Layer Deposition
Enhanced Luminescence Efficiency for Bi, Eu Doped Y2O3 Red Phosphors for White LEDs
Pentacene Organic Thin-Film Transistors with Dual-Gate Structure
Prevention of Thin Film Failures for PECVD Amorphous-Si on Plastic Substrate
Spherical BaMgAl10O17:Eu2+ Phosphor Particles by Liquid Phase Synthesis
Cathodoluminescent Properties of Sol-Gel Derived Gd2O3:Eu Thin-Film Phosphors on Sapphire Substrates
Characteristics of Amorphous Indium Zinc Oxide Anode Films on Polycarbonate Substrate for Flexible Organic Light Emitting Diode
Optical and Electrical Properties of ITO/Ag/ITO Multilayer Thin Films Deposited by D.C. Magnetron Sputtering
Instability of OTFT with Organic Gate Dielectrics
Failure Mechanism of Patterned ITO Electrodes on Flexible Substrate under Static and Dynamic Mechanical Stresses
Interface Reaction between Fillers and Phosphate Glass for Barrier Ribs in Plasma Display Panel
Characteristics of TAG:Ce Phosphor Particles Prepared by Ultrasonic Spray Pyrolysis
ITO Contact Properties with Amorphous Silicon for AM-OLED Application
Molecular Ordering and the Current-Voltage Characteristics of m-MTDATA Thin Films
Microstructure and Electrical Properties of ITO Films Deposited Using Various ITO Targets by Magnetron Sputtering
Chemical Durability of Frits Used in Process of Plasma Display Panels
Properties of Polymer Light Emitting Diodes with Blue Color on ITO/Glass Substrates
Luminance Efficiency of a (La,Tb,Ce)PO4:Eu Phosphor Layer Prepared with Binary Surface Active Organic Molecules
Uniform Poly-Si TFTs for AMOLEDs Using Field-Enhanced Rapid Thermal Annealing
Characteristics of Pentacene with Different Polymer Gate Insulators for Organic Thin-Film Transistors
The Effects of SiO, SiON on IZO Thin Film Deposited by DCMG Method
Synthesis and Fabrication of Novel Polymeric/Organic Materials for Micro/Nano-Scale Optical Printed Circuit Board and VLSI Photonic Integrated Circuit Application
Post-Annealing Effect of SiON Thin Film in Air
Comparison of Natural Type Ia Diamond and CVD Diamond Films by Photoluminescence
Luminescent Properties in NIR Region of LaPO4:Er/LaPO4 Core/Shell Nanoparticles
Low Temperature O2 Plasma-Assisted Wafer Bonding of InP and a Garnet Crystal for an Optical Waveguide Isolator
Preparation and Property of Nonlinear Optical Materials Based on K2O-BaO-TiO2-SiO2 Glasses
Investigation of Thermal Measurement Variables in High Power GaN-Based LEDs
Preparation and Characterization of 70TeO2-30WO3 Glass Thin Films by Radio-Frequency Magnetron Sputtering Method
Detection of Toxic Organophosphate Nerve Agents Using DBR Porous Silicon Chip
Formation of Nanocrystallites in the nc-Si Films by Co-Sputtering Aluminium and Silicon
Phosphor-Conversion White Light Emitting Diode Using InGaN Near-Ultraviolet Chip
Inductively Coupled Plasma Reactive Ion Etching of Ge-SiO2 and SiON Using C2F6 and NF3-Based Gas Mixtures
Comparison of Amorphous Selenium and Mercuric Iodide Film for Diagnostic X-Ray Imaging
Embodiment and Luminescence Properties of Sr3SiO5:Eu(Yellow-Orange Phosphor) by Co-Doping Lanthanide
Fabrication and Characterization of SiO2 Based Waveguide Co-Doped with Si-Nanocrystal and Er3+
Wafer Level Bonding for LED Packaging Using Six Sigma Methodology
Patterning of the Self-Assembled Monolayer Using the Zero Residual Nano-Imprint Lithography
Ceramic Coatings Deposited from Aqueous Solutions
OTS-Templated Cobalt Deposition Using Co2(CO)8 Precursor
Surface Characteristic of Ni-Based Amorphous Alloy Membrane for Hydrogen Permeation
Growth Kinetics and Formation of Uniform Self-Assembled InAs/GaAs Quantum Dots at
Numerical Analysis of Self-Organizing Interconnection Process by 3 Dimensional Flow Dynamics
Growth Mode Diagram for the Epitaxial Growth on the Vicinal Surface of Strained Si (001)
The Calculation of Adatom Diffusion Process on Si and Ge Surfaces from First-Principles
Synthesis of ZnO Flower-Like Nanostructures on GaN Epitaxial Layer by Hydrothermal Process
Fabrication of Antireflective Films Composed of High and Low Refractive Index Layers Using Layer-by-Layer Self-Assembly Method
Synthesis and Characterization of TMA-A Zeolite Nanocrystals
Formation and Optical Properties of ZnSe Self-Assembled Quantum Dots in Cl-Doped ZnSe Thin Films Grown on GaAs (100) Substrates
Synthesis and Evaluation of Hollow-Tubular ZnO by Wet Chemical Method
Synthesis of ZnO Nanostructures by Thermal Evaporation on Graphite
Self-Assembled Nanostructures of Block Copolymers on Random Copolymer Brush
Phase Field Study for Self-Assemble of the Second Phase Particles in Coherent Phase Transition
Low Temperature Growth of ZnO Nanorod on Various Substrates by Solution Chemical Method
Fabrication and Micropatterning of Conducting Polymer Nano-Films for Electronic Displays
Synthesis and Nanophase-Separated Morphology of a Diblock Copolymer of Polypentafluorostyrene-b-Poly(methyl methacrylate) by Atom Transfer Radical Polymerization
Electrophoretic Self-Assembly of Sol-Gel Derived Silica Microspheres
Resistive Switching Characteristics in TiO2 ReRAM with Top Electrode of Co Selectively Formed on SAMs Printed Patterns
Local Work Function Measurements on Various Inorganic Materials Using Kelvin Probe Force Spectroscopy
Effects of Paraffin Addition on Optical Properties and Self-Assembly of SiO2 Photonic Crystal
Influence of Ion Bombardment of Sapphire on Electrical Property of GaN Layer
Industrial Applications of Sol-Gel Technology
Interface Influence on the Proton-Conductivity of Ordered Mesoporous Silica Membranes
Hydrogen-Sensor Prepared Using Proton-Conducting Glass Films
Al-Substituted Li[Li(1/3-x/3)Crx-0.05M0.05Mn(2/3-2x/3)]O2 Cathode Synthesized via Sol-Gel Process
Direct Formation of Zn-Al Layered Double Hydroxide Thin Films Intercalated with Various Organic Anions through the Sol-Gel Method with Hot Water Treatment
Fabrication of Pb-Free Silver Paste and Thick Film Adding Silver Nanoparticles
Novel Preparation of Nano-Sized TiO2 and ZrO2 Particles by Nanocasting with Nanoporous SiO2 and Selective Dissolution
Sol-Gel Synthesis of GdAlO3 Buffer Layers on SrTiO3 (100) Substrates
The Preparation of Fluorescent Nano Dye-Silica Particles by Sol-Gel Process
Effect of Colloidal Silica Contents in the Organic-Inorganic Hybrid Coatings on the Physical Properties of the Film on the Metal Surface
Electrical Properties BaTiO3 Thick Films with an Interlayer SrTiO3 Thin Films
Structural and Dielectric Properties of Screen Printed PZT(70/30) Multilayered Thick Films
Effect of Catalyst on the Colloidal Silica Particle Growth in Direct Oxidation of Silicon
Synthesis of Silica Aerogel Thin Film from Waterglass
Inorganic Aerogel Granules Dried at Atmospheric-Pressure
Synthesis and Microstructure of Al2O3-SiO2 Nanoparticles by a Sol-Gel Processing
Gas Permeation Properties of Poly(N-Vinylpyrrolidone)/ 3-Aminopropyltriethoxysilane Hybrid Membranes
Formation of Spherical and Rod-Shaped TiO2 Nanocrystals Prepared by Reverse Micelle Method
Effect of Ni Nano-Powders Addition on the Dielectric Properties of Ba(Ti,Zr)O3 Based Y5V Ceramics
Surface Strengthening of Zirconia Toughened Alumina (ZTA) Using Glass Infiltration Technique
Mechanical Properties and Fabrication of Silicon Carbide Ceramic by NITE Method
Electric Field Induced Metal-Insulator Transition of Vanadium Dioxide Films on Sapphire Substrate Prepared by Inductively Coupled Plasma-Assisted Sputtering
Roles of Additives on Crystal Growth Rate of Precipitated Calcium Carbonate
Densification Behavior and Microstructure Evolution of SiCf/SiC Composites Incorporated with In Situ Grown SiC Nanowires
Preparation of Filling Materials for Antifouling Mineral Paint Using Rare Earth and their Anion Emission Properties
Strength and Surface Morphology of Si3N4 Composite Ceramics Coated with SiO2 Gel
Hydrothermal Synthesis of Nanosized Titania Photocatalysts Using Novel Water-Soluble Titanium Complexes
Facile Synthesis of SiCN Ceramic Foam via Self-Sacrificial Template Method
Sintering and Oxygen Ionic Conducting Properties of Bi2V0.9Co0.1O5.5-? Derived from an EDTA-Citrate Precursor
Low Temperature Sintering in 95(Na0.5K0.5)NbO3-5LiTaO3 Ceramics
Preparation of Ion-Sieve Type (H)[M0.5Mn1.5]O4 (M=Mg, Zn) and their Lithium Adsorption Properties in Seawater
Dielectric Properties of Alumina Ceramics in the Microwave Frequency at High Temperature
Preparation and Characterization of Cordierite-Bonded Silicon Carbide Porous Ceramics
Synthesis and Characterization of Ti3(Al1-n Gen)C2 by a Reactive Hot Pressing of TiCx, Al, and Ge Powder Mixture
Thermal Behavior of Carbon Nanotubes in Alumina Matrix Nanocomposites
Synthesis of Bio-Glass Ceramics in Na2O-CaO-SiO2-P2O5 System with Fluoride Additives
Wear Characteristics of Binary Mg-Al, Si, Zn Alloys Coated by Plasma Electrolytic Oxidation Method
Effect of Current Ratio on Plasma Electrolytic Oxide Coatings on Mg-Al Alloy
Photocatalytic Properties of Anodic TiO2 Nanotubes
Development of Carbon Nanostructures in an Intermediate Prepared from Sol-Gel Process
Effects of Deposition Parameters on the Crystallinities of CeO2 and Y2O3 Buffer Layers on Textured Ni Deposited by Magnetron Sputtering
Effect of Ceramic Powders on the Reaction Sintering of Ceramic/Metal Mixed Powders
Electronic Structure and Defect States of Transition Metal Doped Rutile TiO2
Ceramic Electrode Materials for Electrostatic Chuck Applications
Investigation of Scandia Stabilized Zirconia(ScSZ) - Yttria Stabilized Zirconia(YSZ) Composite Electrolyte for Intermediate Temperature Fuel Cells
Characteristics of La0.8Sr0.05Ca0.15CrO3 Interconnect Material for SOFC Synthesized by a Modified Pechini Method, USP, and GNP
Sealing Properties of Ceramic Fiber Composites for SOFC Application
Highly Sinterable Lithium Titanate Powders Fabricated by an Organic-Inorganic Solution Route
Effects of MgO Coating on Electrical Properties of BaTiO3
The Effect of Initial Hydration Temperature on the Characteristics of Calcium Hydroxide and Aragonite Precipitated Calcium Carbonate
Oxidation Behavior of Tantalum Boride Ceramics
Rapid Transformation of ?-Alumina Nanocomposite Powders by Microwave Assisted Combustion
Simulation and Characterization for the Non-Linearity of Multilayer Ceramic Capacitors with New Equivalent Circuits under Ac-Field
Effect of Phase Transformation and Fine Particle Dispersion on Densification of High Purity Nanocrystalline ?-Phase Dispersed ?-Alumina
Study on the Durability of E-Glass Fiber/Vinylester Resin Composites in Various Environment
Prospects of Potential Semiconductor Spin Detectors
The Effect of the Geometrical Shape and Size of the Cross Section on the Spin-Polarized Transport and the Giant Magnetoresistance : Finite Element Method Analysis
First Principle Calculations of the Magnetic Structures of 3d Transition Metals Doped GaN
Structural and Microwave Properties of Fe-Based Nanopowders via Mechanochemical Synthesis
Low-Temperature Synthesis of Ordered L10-FePtCu Nanoparticles with High Coercivity
Crystallographic and Magnetic Properties of Sm2Fe17N3 Films Grown by RF Magnetron Sputtering
Glycothermal Synthesis and Magnetic Properties of YIG/YAG Nanoparticles
Magnetic Patterning of the Ni/Cu Thin Film by 40 keV O Ion Irradiation
Magnetic Properties and Microstructures of Fe73.5Si13.5B9Cu1Nb3 Alloy Crystallized in Nitriding-Atmosphere
Excellent Response of Giant Magnetoimpedance Effect in a Glass-Coated Microwire LC-Resonator
Magnetic Properties of Various Thick Co-Fe Circular Dot Arrays
Magneto-Optical Properties of Ce-Yttrium Iron Garnet Nanoparticles Dispersed in an Epoxy Resin
Factors Influencing the Sensitivity of the CDMPI Sensor
Magnetic Properties of Mn-Zn Ferrite Nanoparticles Fabricated by Conventional Ball-Milling
Functionalization of Magnetite Nanoparticles for Protein Immobilization
Synthesis of Monodisperse FePt Nanoparticles at a Low Temperature
The Selective Protein Separations with Polyaminofunctionality on Controlled Silica Coating-Layers of Magnetic Nanoparticles
Structure and Magnetic Properties of Nanocrystalline Pd-Co and Pd-Co-Fe Layers
Edge Shape Effect on Switching Behavior in a Small Ferromagnetic Pattern
Ti-Based Amorphous Alloys and Composites as Potential Candidate Materials for Energy Applications
DLC Film Coating on a Lithium Metal as an Anode of Lithium Secondary Batteries
Advanced Manufacturing Concepts for Crystalline Silicon Solar Cells: Phosphorous Doping and Contact Opening Process
Potential of Cr2AlC Ternary Carbide as Material for Bipolar Plate in PEMFC
Growth of Cu(In1-xAlx)Se2 Thin Films by Atmospheric Pressure Selenization of Sputtered Precursors
Device Performance of P3HT/C70-Methanofullerene Bulk-Heterojunction Polymer Photovoltaic Cells
Thermoelectric Properties of Co1-xFexSb3 Prepared by Encapsulated Induction Melting
Nano Composite Membranes of Branched Sulfonated Poly(Ether Ketone Sulfone) and SiO2 for Fuel Cell Application
Electrochemical Performance of Activated Carbon Electrode Added with LiCoO2 for Hybrid Capacitor
Catalytic Effect of Ti5Si3 on Dehydrogenation of NaAlH4
Novel Low-Temperature Synthesis and Characterization of Lithium Cobalt Dioxide for Lithium Rechargeable Batteries
Characterization of Cu(In,Ga)3Se5 Thin Film for Top Cell in CIGS Tandem Solar Cells
Application of Anodic Titanium Oxide to Dye-Sensitized Solar Cells
Electrodeposition of CdS Nanostructures for Solar Cells Using Nano Imprint Templates
Effect of Various Lithium Salts in TEGDME Based Electrolyte for Li/Pyrite Battery
Formation of CuIn1-xAlxSe2 Thin Films by Selenization of Metallic Precursors in Se Vapor
Microstructure Analysis and Characterization of Li(NiCoMn)O2 Thin Film for Cathode Application Prepared by Li Diffusion on the Ni-Co-Mn Alloy Substrates
Effects of Se Atmosphere on the Densification of Absorber Layer Using Cu(In,Ga)Se2 Nanoparticles for Solar Cells
Porous Silicon Layer by Electrochemical Etching for Silicon Solar Cell
The Activation and Hydrogen Sorption Characteristics of Zr57V36Fe7 Alloy and its Constituent Phases
Electrochemical Comparison of Chemically or Physically Modified Natural Graphite Anode for Lithium-Ion Batteries
Characteristics of Indium Zinc Oxide Thin Films Deposited by Radio Frequency Reactive Magnetron Sputtering for Solar Cells Application
Preparation and Reactivity Test of Nano Size ZnO for Removal of H2S and COS in a Gasified Fuel Gas
The Influence of Polymer Content on Electrochemical Properties of Si Electrode
Structural and Electrochemical Evaluation of a Si Film Electrode Fabricated on a Ni Buffer Layer
The Effect of ZnO:Al Sputtering Condition on a-Si:H / Si Wafer Heterojunction Solar Cells
Thermoelectric Properties of Zn4-xSb3 with x=0~0.5
Electrochemical Properties of Al Doped Li(Ni1/3Co1/3Mn1/3)O2
Fabrication of Hybrid Solid Electrolyte by LiPF6 Liquid Electrolyte Infiltration into Nano-Porous Na2O-SiO2-B2O3 Glass Membrane
Characteristics of Lithium Polysilicate Electrolyte Synthesized by Sol-Gel Processing
Ag Deposition on Si-C Composite Anodes for Lithium Ion Batteries
Electrochemical Behaviors of PtRu/CNTs Catalysts Prepared by Pulse Potential Plating Methods
The Effect of Oxygen Pressure on the Synthesis of LiNiO2
The Effect of SnOx as the Protective Layer for the Lithium Manganese Oxide Thin Film
Performance of Tin Oxide/Graphite Composite Anode for Lithium Ion Battery
Preparation and Electrochemical Evaluation of La1-xSrxMnO3 Cathode Material for Zinc Air Secondary Batteries Application
Synthesis of Nanosized TiO2-Ag-SiO2 Sols by Modified Sol-Gel Method and their Application for Methane Hydrate Formation
A Study on the Effect of Structure and P-Doping of Si Thin Film as an Anode for Lithium Rechargeable Batteries
The Reinforcement Destruction Simulation of an Al-Zn Carbon Fibers Composite
Fabrication of SiCf/SiC Composite by the PIP Process with Electron Beam Curing Method
Low Temperature Sintering of AlN-SiC-TiB2 System for the Fabrication of Continuous Fiber Reinforced Ceramic Composites (CFCC)
Study on Thermal Conductivity of Polyetheretherketone/Thermally Conductive Filler Composites
Synthesis and Electrorheological Characteristics of Conducting Polymer/Clay Nanocomposites
Conductive Sol-Gel Hybrid Materials for Novel Cofactor Regeneration in Biocatalysis
Development of Ultrasonic-Polarized Mechanism for Stacking Orientation of Quasi-Isotropy Composite Laminates
Impregnation of Eicosane into Polyester Fiber Using Supercritical Carbon Dioxide
Fabrication of Metal/Intermetallic Compound Laminate composites by Thin Foil Hot Press Process
Single Crystal PMNT/Polymer 1-3-2 Piezoelectric Composites
Fabrication of Polymer Nanotubes Using Alumina Template
Fabrication and Microstructure Control of Continuously Porous Ceramics with Al2O3-(m-ZrO2) and t-ZrO2 Multilayer Shell
Structures and Physical Properties of Multi-Walled Carbon Nanotube-Filled PVDF Thermoplastic Composites
Wear Behaviors of Al/Al2O3 Composite Coatings Fabricated by Thermal Spray Process
Fabrication of Carbon Nanotube Embedded Nylon Nanofiber Bundles by Electrospinning
Synthesis of Polymer/Silica Hybrid Nanocomposites Prepared by the Sol-Gel Method
Preparation and Characterization of Multiwalled Carbon Nanotube/Poly(?-Caprolactone) Composites via In Situ Polymerization
Effect Of Al2O3 Particle Size on Compressive Behavior of Al Composites
The Preparation of Bone-Mimetic Sol-Gel Nanoporous Scaffold of L3-Phase Silica/Hydroxyapatite
The Improvement of Chemical and Mechanical Properties of Al/Cu-Coated SiC Composites
One Step Synthesis and Consolidation of Nanostructured ZrSi2-SiC Composite and its Mechanical Properties
Mechanical Properties and Consolidation of WC-8wt.%Ni Hard Materials by HFIHS and PCAS
Materials for Devices in Life Science Applications
Strength and Reliability Performance of Hydroxyapatite Coatings on Titania Treated Ti6Al4V Alloy Using Sol-Gel Precursor
Preparation of Titanium Oxide Nanotube by Hydrothermal Process
Large Area Synthesis of 1-D ZnO Nanostructure Arrays on Zn Substrate via Solvothermal Process
Characteristics of Gas Sensors Based on Single-Walled Carbon Nanotube Bundles Treated by Acid Stirring
Hydrothermal Synthesis of Noble Metal Loaded Tin Oxide Sol Solution for Gas Sensor Application
Control of Microstructures and Textures in Nanocrystalline Fe-50wt%Ni Foil
Synthesis of High Concentration Cuprous Oxide Nanoparticles by Modified Polyol Process
Large-Scale Synthesis of Polymer-Stabilized Silver Nanoparticles
Preparation of Nickel Nanoparticles in Water-in-Oil Microemulsion
Chemically Driven Polyacrylonitrile Fibers as a Linear Actuator
Morphological Evolution of Silicon Nanowires Grown by Chemical Vapor Deposition
Effect of Surfactant on the Morphology of Silver Nanoparticles
Chemical Durability and Anti-Microbial Property of Silver-Doped Colloidal Silica
Thickness Dependence of the Crystallization of ?-Fe2O3/?-Al2O3(0001) Thin Films Grown by Sputtering
Fabrication of Nano-Sized Indium Oxide Powder below 50nm by Spray Pyrolysis Process
Nano Structured Silica Aerogel Films by Dip-Coating Process
Properties of TiC and TiCN Nanoparticles Fabricated by a Magnesium Thermal Reduction Process
Preparation and Characterization of CdSe Nanoparticles Synthesized Using the Ultrasonic Irradiation
TEM Analysis of Multilayered Co/Cu Nanowire Synthesized by DC Electrodeposition
Growth of Carbon Nanotubes by Evaporating Ethanol as Carbon Source
The Novel Methods for Preparing Antibacterial Fabric Composites Containing Nano-Material
Effects of Concentration of Catalyst Precursors on Carbon Nanostructures
A New Insight into the Mechanistic Study on Synthesis of Silica Nanospheres
Property of NOx Gas Sensor Using Carbon Nanotube Prepared by Thermal CVD Method
Adsorption Characteristics of Uranyl Ions on Carboxymethylated Polyethyleneimine (CM-PEI) / Activated Carbon Composites
The Effect of DC Bias Voltage on the Structural and Optical Properties of Hydrogenated Nanocrystalline Si Thin Films
Solvothermal Preparation of Nano-Sized CaWO4 Particles
Nano-Imprinted Ultrahigh-Density Nanopore Arrays
Fabrication of Porous Al2O3 and TiO2 Thin Film Hybrid Composite Using Atomic Layer Deposition and Properties Study
Synthesis and Characterization of Bioactive Sodium Titanate Nanotube by Alkali Hydrothermal Treatment
Activation and Gas Sorption Properties of Nano-Size Titanium Powder Getters
Synthesis and Characterization of PbSe Nanocrystals by a Microchannel Reactor
SnO2 Nanostructures Synthesized on Co Substrates
Sinterbility and Mechanical Properties of Zirconia Nanoparticles Prepared by Hydrothermal Process
Phase Transition of Titania Nano-Materials Controlled by Hydrothermal Method
Fabrication of Size Controlled Nanohole Array on III-V Semiconductor Substrate by ICP-RIE Using Nanoporous Alumina Mask
Effect of Nanoscale Multilayered Structurization on Hardness and Wear Resistance in Al-Cr-N Coating
Carbon Nanotube Gas Sensor Fabricated on Anodic Aluminum Oxide
Effect of Adhesive Thickness and Bonding Length on Behavior of Composite Adhesive Joints Subject to Torsion
Effect of Cell Size on the Dynamic Compressive Properties of Aluminum Alloy Foams
Fatigue Crack Propagation Behavior of Friction Stir Welded 6061-T651 Al Alloy
Mechanical Behaviors of Ultrafine Grained Metallic Materials
Effect of Vibration during Welding on the Fatigue Strength of Structural Steel Weldments
TEM & EBSD Study on Deformation Behavior of High Nitrogen Austenitic Fe-18Cr-18Mn-2Mo-0.9N Stainless Steel
Effects of Rough Surface on Contact Depth for Instrumented Microindentation Using Spherical Indenter
Effect of Multipass Severe Rolling Process in the API X65 Steel
Low Temperature Effects on the Fracture Behavior of Cold-Worked STS 304 Stainless Steel for Membrane of LNG Storage Tank
Hertzian and Nanoindentations on EBPVD-Coated Gadolinium Zirconate Thermal Barrier Materials
Microstructural Evaluation and Mechanical Properties of Al2O3/ZrO2 Layered Structure with Graded Interlayers
Tensile Properties of Friction Stir Welded AZ31B Mg Alloy
Influence of Thixoextrusion Parameters on Mechanical Properties of Thixoextruded 7075 Al Wrought Alloy
High Temperature Deformation Behavior of M2 High-Speed Tool Steel
Fatigue Behavior of Thin Cu Foils for Flexible Printed Circuit Board
Difference in Annealing Characteristics of Nanostructured Copper Alloys Processed by Accumulative Roll Bonding
Effects of Oxygen on Phase Stability and Mechanical Properties of Quenched Ti-Nb Alloys
Assessment of Tensile and Fatigue Damage in 316L Stainless Steel by Acoustic Emission Technique
Fatigue Crack Growth of Ultrafine Grained Pure Ti after Severe Plastic Deformation
Tribological Characteristics of Coarse and Ultra-Fine Grained Ferrite-Martensite Dual Phase Steel Fabricated by Equal Channel Angular Pressing
Microstructural Evolution during Annealing of 5052 Al Alloy Deformed at Cryogenic Temperature
Influence of ECAP Routes on the Microstructure and Mechanical Properties of Hot Extruded 3003 Al Alloy
Effect of Heat Treatment on the Tensile Properties of Poly-Crystal and DS CM247LC Alloy
Effect of Minor Elements on the Grain Boundary Strengthening of a Single Crystal Superalloy RR2072
Effects of Surface Coating on Wear Properties of A356-20vol.%SiCp Composites
Change of Mechanical Properties of FM Steels after Thermal Aging
Effect of Heat Treatment on Compressive Properties of Open Cell Aluminum Foams
Effects of Mischmetal Addition on the Microstructural Characteristics of BCuP-2 Brazing Filler Metal
Observation of Dynamic Behavior in Primer-Coated Steel Welding by CO2 Laser
Solid State Diffusion Bonding of Titanium Alloys
The Heat Treatment Characteristics of Hydroxyapatite Thin Films Deposited by RF Sputtering
Effect of Post-ECAP Aging on Mechanical Properties of Age-Hardenable Aluminum Alloys
Investigation on the Microstructure of an 11% Cr Martensitic Steel with Titanium
Microstructure Changed during Accumulative Roll Bonding of Al/Mg Composite
Titanium Alloys Casting for Structural Application
The Effects of Processing Temperature and Time on the Surface Properties of Plasma Radical Nitrided SCM 440 Steel
Identification of Precipitates Appearing in Al-Li-Cu-Zr Alloy
Mechanical Properties of Si3N4 Ceramics Prepared by Nitrided Pressureless Sintered (NPS) Process
A Characteristics Study of FeAlCr Intermetallic Compound Manufactured by Osprey Forming Process
Effect of Silver Additions on the Ageing Behavior and Mechanical Properties of Mg-Al-Si-Sn-Sr Alloy
Characteristics of U and U-7wt%Mo Polycrystalline Foils Cast by Alternative Fabrication Method
Thermotransport of Hydrogen in Zr-1.0Nb-1.0Sn-0.1Fe Alloy
Development of Environment-Friendly CaO Added AZ31 Mg Alloy
Microstructural Evolution in CuAlNi Alloy with Ageing
The Effect of Bubbling and AlCuP for Refining Primary Silicon at Al-18%Si Alloy
Texture and Microstructure in Ni-W Alloy Tape Manufactured by the Powder Metallurgy Process
Formation of Ferrite with Cr Equivalents and Solidification Rates in Mod. (9-12)Cr-1Mo Steels
Formation of a Crystalline-Glass Composite in a Cu-Based Bulk Metallic Glass by Using the Cu-Pb Monotectic System
MC Carbide Decomposition during Thermal Exposure of Polycrystalline Ni-Base Superalloys
Properties of Preferred Orientation of TiO2 Thin Film on Plasma Pretreated Substrate
Effect of Heat Treatment on Characterizations of TiCrN Coated Layer by R.F Magnetron Sputtering
Microstructure and Mechanical Properties of Mg-Zn-Y Alloys Fabricated by Rapid Solidification and Spark Plasma Sintering Processes
Microstructure and Compression Properties of Al-8Fe-2Mo-2V-1Zr Alloys Produced by Extrusion of Melt-Spun Powders
Aqueous Dispersion of ZrB2 Powder - Effect of Surface Corrosion and Dispersant
Growth Model of Circumferential Outer Diameter Stress Corrosion Crack in Retired Steam Generator Tube of Kori 1 Nuclear Power Plant
Effect of Delta Ferrite on Corrosion Resistance of Type 316L Stainless Steel in Acidic Chloride Solution by Micro-Droplet Cell
A Study on Corrosion-Resistant Properties of Unleaded Bi-Containing Automotive Epoxy Primers
Tribological Behavior and Surface Chemistry Characteristics of Quasicrystal Coatings
Electrochemical Interpretation of a Stress Corrosion Cracking of Thermally Treated Ni Base Alloys in a Lead Contaminated Water
Application of Taguchi Method for Optimization of Vacuum Plasma Sprayed CoNiCrAlY Coatings
Corrosion Protection of Aluminum Data Line in TFT-LCD Using Chemical Conversion Coating
Influences of Si, W, and Cu on the Localized and Stress Corrosion of 18 % Cr Austenitic Stainless Steel
Effects of Pretreatment on the Etch Pit Formation during the Electrochemical Etching of Aluminum
Study on Nickel Ferrite Formation by Using a Simple Method to Simulate Heat Transfer Surface
Bonding Strength of Top Coat and its Fracture Mechanism in Thermal Barrier Coatings with Thermal Fatigue
The Sliding Wear Behavior of Titanium Carbide Dispersion-Reinforced Steel
Fabrication and Characterization of Al-Fe Coating for the Wet-Seal Area of Separator for Molten Carbonate Fuel Cells (MCFC) by the Laminating of Al Foil
Surface Modification and Heat Treatment of Ti Rod by Electro Discharge
Corrosion of Silicate Glasses and Glass-Ceramics Containing EAF Dust in Acidic Solution
Nickel Tungsten Alloy Electroplating for the High Wear Resistant Materials Applications
Adhesion Properties of Copper/Polyimide Film Modified by Reactive Ion Etching(RIE)
In2O3 Thin Films Prepared on TiAlN Substrates Using a Triethylindium and Oxygen Mixture
Microstructures and Tribological Properties of Plasma Arc Sprayed Al-Fe-Cr-Ti Quasicrystalline Coatings
Variation of Corrosion Resistance and Hardness with Heat Treatment of ALDC8 Al Alloy
Impact and Indentation Resistance of Superhard AlCrN Thin Films
Shielding Effectiveness Simulation of Brass-Iron Sandwich Films
The Effects of Si and Deformation on the Phase Transformation in Dual Phase Steels
Characteristics of 2.45GHz Microwave Plasma by Langmuir Probe Measurements
An Ab Initio Study of the Energies of Coherent Interfaces Formed between bcc Iron and Carbides or Nitrides of Transition Metals
Competing Ion Effect of Stabilization by Cr(III) & Cr(VI) in Ettringite Crystal Structure
Microscratch Analysis and Interfacial Toughness of Catalyst Coating on Electrolyte Polymer in Micro Fuel Cells
A Method for the Evaluation of Heat Transfer Coefficient by Optimization Algorithm
Characterization of Anisotropic and Irregularly-Shaped Materials by High-Sensitive Thermal Conductivity Measurements
Dimensional Characteristics of Products Using Rotary Swaging Machine with Four-Dies
Cooling and Heating Characteristics of Ti-Ni Based Shape Memory Alloy Wire Actuators
X-Ray Anomalous Scattering Studies of Fe-Tb Amorphous Thin Films
Encapsulation of H2 Molecules in Cs3Na9-A Zeolite: A Theoretical Approach
Coarsening of MX Nitrides in Cr-Mo-N-X(X=V,Nb,Ti) Ferritic Steels
EXAFS Analyses on Local Structure of Gallium in Amorphous Selenide Optical Materials Doped with Rare Earths
Analysis on the Martensitic Transformation in the Ti-xNb Alloys Using a Phenomenological Theory
Mechanical Strength and Microstructural Characterization of SUS304 Brazed Joints with BNi-2 Filler Metal: Influence of Brazing Temperature and Time
Characterization of a-Se(As:Cl) Film for Phosphor Coupled X-Ray Light Modulators
Ab Initio Study with Transition State Theory (TST) for the Calculation of the Barrier Height of Migration Energy of Neutral Indium in Silicon
Effects of Thermal Annealing on the Atomic Structure of ta-C Films Using Molecular Dynamics Study
Observation of an Interlayer in a Nano-Scale SiO2 Layer on Si Substrate by X-Ray Reflectivity (XRR) Analysis
Grand Canonical Monte Carlo Simulations for the Prediction of Adsorption Capacity of Hydrogen in MOFs
Effect of Curvature on Gas-Particle Flow in Converging and Diverging Supersonic Nozzle
Measurement of Mechanical Properties for Thin Film Using Visual Image Tracing Method
Estimation for Nd-Fe-B Melt-Spun Powder Quality
Encapsulation of Municipal Solid Waste Incineration Bottom Ash to Immobilize Cu and Pb via Carbonation Reaction
Modification of V2O5-WO3/TiO2 Catalysts Supported on SiC Filter for NO Reduction at Low Temperature
Preparation and Stabilization of Chitosan-Lipase Composite within Mesoporous Silica Material
Fabrication of Lotus-Type Porous NiAl and Ni3Al Intermetallic Compounds
Pore Morphology of Lotus-Type Porous Copper Fabricated by Continuous Casting Technique
Gold Nanowire-Network Structure Prepared from Metallic Gold Nanowires Deposited in Polycarbonate Template Membrane
Nanoporous SiC Membrane Derived from Preceramic Polymer
Mechanistic Aspects of Ethylbenzene Dehydrogenation with CO2 over K2O/B2O3 -TiO2 - ZrO2 Bi-Functional Catalysts
Effect of Method of Preparation of Cu-Zn-Al Catalysts on DME Synthesis
Heterogeneous Photocatalytic Degradation of Chlorophenols over Ag-TiO2 Nano Particles in an Aqueous Suspension
Nano-Sized Au/CeO2 Catalysts for Total and Selective CO Oxidation
Performance of Immobilized Quaternary Salt Catalysts in the Synthesis of Dimethyl Carbonate from Propylene Carbonate and Methanol
Catalytic Cracking of LLDPE over MCM-48
Synthesis and Catalytic Application of Mesoporous Molecular Sieves MCM-41 Containing Niobium and Tantalum
Preparation of Silica-Supported Nickel Molybdenum Phosphides by Temperature-Programmed Reduction Technique
Chemical Vapor Deposition of Pt Nano Particles on Carbon Nanotubes
Influence of Electrolytic Mediums on Microstructure of Anodic Titania Film
Ti Oxide Films Formed by an Anodizing Process for Use in Dental Implants
Pt(IV) Adsorption Characteristics of Nanoporous Carbons Modified with Carboxymethylated Polyethyleneimine
Microwave-Assisted Heterogeneous Transfer Hydrogenation of Ketones
A Study of Hydroxyapatite Coating on Porous Ti Compact by Electrostatic Spray Deposition
Photocatalytic Hydroxylation of Phenol over Ti-Containing Zeolites (TS-1, Ti-MCM-41)
Characterization and Acid Catalytic Properties of NiO Supported on ZrO2 and Modified with MoO3
Characteristics of Al Foam with High Porosity by Melt Foaming Method
Dry Wear Properties of Porous Copper Fabricated by Unidirectional Solidification
Chiral (Salen) Complexes Encapsulated in Mesoporous ZSM-5 as an Optical Active Catalyst for Asymmetric Phenolic Ring Opening of Terminal Epoxides
Ferroelectric Nanotube Arrays in Hexagonally Ordered Pores of Aluminum Oxide
Synthesis and Photocatalytic Activity of TiO2 Nanoparticles Loaded on the Fluorine-Modified Hydrophobic Mesoporous Silica
Electrochemical Characteristics of Carbon-Supported Metal Nanoparticles Catalysts Prepared by Electrical Deposition Methods
Investigation on the Sound Absorption and Transmission for Aluminum Foam and its Composite
Structural Features and Microwave Properties of Ba0.5Sr0.5TiO3 Films Grown on Sapphire Substrates
Synthesis of Dense Mesoporous Silica with High Surface Area by Hydrothermal Hot-Pressing (HHP) Method
Adsorption Properties of Activated Carbon Fibers Characterized by Electric Decomposition
A Study on Al-Mg Alloy Foams by Melt Foaming Method