Geopolymer and Green Technology Materials

Effects of Lightweight Aggregate Size and Grading on the Residual Strength of Lightweight Geopolymer Concrete Exposed to Elevated TemperatureProperties of Lightweight Bubbles Aggregate (LBA) for the Replacement of Coarse Aggregates in ConcreteUtilization of Recycled Glass Waste as Partial Replacement of Fine Aggregate in Concrete ProductionCompressive Strength of Concrete with Recycled Glass as Partial Aggregate ReplacementProduction of Fiber Glass Reinforced Geopolymer Composite PipeReview on Development of Clay Based Geopolymer Ceramic CompositesEffect of Particle Size on Properties of Sidoarjo Mud-Based GeopolymerMechanical Properties of MIRHA-Fly Ash Geopolymer ConcreteEpoxy Layered-Silicates Filled with Fly Ash Based Geopolymer: Compressive PropertiesLight Weight Geopolymer Paste Made with Sidoarjo Mud (Lusi)Kinetics of Geopolymer Solidification Study Using Texture AnalyzerReviews on Clay Geopolymer Ceramic Using Powder Metallurgy MethodEffect of Alkaline Activators Concentration to the Strength and Morphological Properties of Wastepaper-Based Geopolymer MortarsHybridization Effect of Kaolin and Calcium Carbonate on Tensile and Thermal Properties of Compatibilized Polypropylene CompositesProperties of Self-Compacting Geopolymer ConcreteProperties of Geopolymer Concrete from Local Fly Ash (FA) and Palm Oil Fuel Ash (POFA)Investigation on the Degree of Reaction and Strength Performance of Fly Ash Based Geopolymer Binder with Alternative Chemical ReagentsEffect of Solid/Liquid Ratio during Curing Time Fly Ash Based Geopolymer on Mechanical PropertyThe Influence of Alkali Activator Concentration to Mechanical Properties of Geopolymer Concrete with Trass as a FillerCharacterization of Soils as Potential Raw Materials for Soil Stabilization Application Using Geopolymerization MethodFundamentals of Geopolymers and Related Alkali Activated MaterialsLightweight Geopolymer Binder Base on Sidoarjo MudRheology of High Volume Sidoarjo Mud MortarThe Relationship between Water Absorption and Porosity for Geopolymer PasteEffect of NaOH Concentration on Microstructure of Boiler Ash Based GeopolymerComparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical PropertiesEffect of Sodium Silicate Types on the High Calcium Geopolymer ConcreteThe Effect of NaOH Concentration and Curing Condition to the Strength and Shrinkage Performance of Recycled Geopolymer ConcretePhysical and Mechanical Properties of Fired Clay Brick Incorporating with Mosaic Sludge WasteStudy on Quenching and Artificial Ageing on Al-Si AlloyThe Experimental Determination of the Friction Stress between the Semi-Product and the Active Plate at the Multiaxial Forging of CopperEffect of Metakaolin on the Strength and Pore Size Distribution of ConcreteThe Effect of Silicon Nitride Addition on Microstructure and Microhardness of SN100C Solder Alloy Using Powder MetallurgyLeachability of Fired Clay Brick Incorporating with Sludge Waste from Mosaic IndustryDevelopment of Low Cost Sn-0.7Cu Base Composite Solder for High Temperature ApplicationComparison between Thermal Interface Materials Made of Nano Carbon Tube (NCT) with Gad Pad 2500 in Term of Junction Temperature by Using CFD Software, FluentTMThermal Properties of Polypropylene/Palm Kernel Shell Biocomposites: Effects of Amino Silane (APTES)Effects of Electro Osmotic Consolidation in South West of Johor: Small Laboratory ScaleEffect of Polypropylene-Methyl Polyhedral Oligomeric Silsesquioxane Compatibilizer in Polypropylene/Silica Nanocomposites: Mechanical, Morphological and Thermal StudiesDesign of Experiment (DOE) of Powder Metallurgy Technique in Fabricating SnCu/Carbon Lead-Free Composite Solder with Different Mixing ParametersEffect of TiO2 Reinforcement on Microstructure and Microhardness of Low-Silver SAC107 Lead-Free Solder Composite SolderComparison of Linear Interpolation Method and Mean Method to Replace the Missing Values in Environmental Data SetEffect of Organic Modification on Dynamic Compression Properties of Polypropylene/Muscovite Layered Silicate CompositesProperties of Concrete with Different Percentange of the Rice Husk Ash (RHA) as Partial Cement ReplacementAn Innovation of the Palm Oil Based Wax as Industrial Wax for Machining Prototype Sustainable ProductsTreatment Method for Dispersion of Carbon Nanotubes: A ReviewHybrid Microwave-Assisted Rapid Sintering Process for Fabrication of Sn-0.7Cu+1.0wt.%Si3N4 Composite SolderInvestigation of Epoxidized Natural Rubber (ENR 50) as a Compatibilizer on Cogon Grass Filled Low Density Polyethylene/Soya Spent FlourInvestigation of Noise Reduction Coefficient of Organic Material as Indoor Noise Reduction PanelThe Flexural Properties of Reinforced Recycled Glass Concrete BeamTesting on Building Material Using Waste Material in Fired Clay BrickSimulation of Nano Carbon Tube (NCT) in Thermal Interface Material for Electronic Packaging Application by Using CFD SoftwareEffect of Surface Modification on Strain Rate Sensitivity of Polypropylene/Muscovite Layered Silicate CompositesTensile Properties of Linear Low Density Polyethylene/Rambutan Peels (Nephelium chryseum Blum.) Flour BlendsThe Effect of Si/Al Ratio and Sodium Silicate on the Mechanical Properties of Fly Ash Based Geopolymer for CoatingMicrostructure Study on Cuprous Oxide Thin Films Deposited on n-Si Substrate via Sol-Gel Spin Coating TechniqueGeopolymer: A Review on Physical Properties of Inorganic Aluminosilicate Coating Materials