Geopolymer and Green Technology Materials

Preface and Organization
Chapter 1: Aggregate
Effects of Lightweight Aggregate Size and Grading on the Residual Strength of Lightweight Geopolymer Concrete Exposed to Elevated Temperature
Properties of Lightweight Bubbles Aggregate (LBA) for the Replacement of Coarse Aggregates in Concrete
Utilization of Recycled Glass Waste as Partial Replacement of Fine Aggregate in Concrete Production
Compressive Strength of Concrete with Recycled Glass as Partial Aggregate Replacement
Chapter 2: Geopolymer Technology
Production of Fiber Glass Reinforced Geopolymer Composite Pipe
Review on Development of Clay Based Geopolymer Ceramic Composites
Effect of Particle Size on Properties of Sidoarjo Mud-Based Geopolymer
Mechanical Properties of MIRHA-Fly Ash Geopolymer Concrete
Epoxy Layered-Silicates Filled with Fly Ash Based Geopolymer: Compressive Properties
Light Weight Geopolymer Paste Made with Sidoarjo Mud (Lusi)
Kinetics of Geopolymer Solidification Study Using Texture Analyzer
Reviews on Clay Geopolymer Ceramic Using Powder Metallurgy Method
Effect of Alkaline Activators Concentration to the Strength and Morphological Properties of Wastepaper-Based Geopolymer Mortars
Hybridization Effect of Kaolin and Calcium Carbonate on Tensile and Thermal Properties of Compatibilized Polypropylene Composites
Properties of Self-Compacting Geopolymer Concrete
Properties of Geopolymer Concrete from Local Fly Ash (FA) and Palm Oil Fuel Ash (POFA)
Investigation on the Degree of Reaction and Strength Performance of Fly Ash Based Geopolymer Binder with Alternative Chemical Reagents
Effect of Solid/Liquid Ratio during Curing Time Fly Ash Based Geopolymer on Mechanical Property
The Influence of Alkali Activator Concentration to Mechanical Properties of Geopolymer Concrete with Trass as a Filler
Characterization of Soils as Potential Raw Materials for Soil Stabilization Application Using Geopolymerization Method
Fundamentals of Geopolymers and Related Alkali Activated Materials
Lightweight Geopolymer Binder Base on Sidoarjo Mud
Rheology of High Volume Sidoarjo Mud Mortar
The Relationship between Water Absorption and Porosity for Geopolymer Paste
Effect of NaOH Concentration on Microstructure of Boiler Ash Based Geopolymer
Comparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties
Effect of Sodium Silicate Types on the High Calcium Geopolymer Concrete
The Effect of NaOH Concentration and Curing Condition to the Strength and Shrinkage Performance of Recycled Geopolymer Concrete
Chapter 3: Green Materials
Physical and Mechanical Properties of Fired Clay Brick Incorporating with Mosaic Sludge Waste
Study on Quenching and Artificial Ageing on Al-Si Alloy
The Experimental Determination of the Friction Stress between the Semi-Product and the Active Plate at the Multiaxial Forging of Copper
Effect of Metakaolin on the Strength and Pore Size Distribution of Concrete
The Effect of Silicon Nitride Addition on Microstructure and Microhardness of SN100C Solder Alloy Using Powder Metallurgy
Leachability of Fired Clay Brick Incorporating with Sludge Waste from Mosaic Industry
Development of Low Cost Sn-0.7Cu Base Composite Solder for High Temperature Application
Comparison between Thermal Interface Materials Made of Nano Carbon Tube (NCT) with Gad Pad 2500 in Term of Junction Temperature by Using CFD Software, FluentTM
Thermal Properties of Polypropylene/Palm Kernel Shell Biocomposites: Effects of Amino Silane (APTES)
Effects of Electro Osmotic Consolidation in South West of Johor: Small Laboratory Scale
Effect of Polypropylene-Methyl Polyhedral Oligomeric Silsesquioxane Compatibilizer in Polypropylene/Silica Nanocomposites: Mechanical, Morphological and Thermal Studies
Design of Experiment (DOE) of Powder Metallurgy Technique in Fabricating SnCu/Carbon Lead-Free Composite Solder with Different Mixing Parameters
Effect of TiO2 Reinforcement on Microstructure and Microhardness of Low-Silver SAC107 Lead-Free Solder Composite Solder
Comparison of Linear Interpolation Method and Mean Method to Replace the Missing Values in Environmental Data Set
Effect of Organic Modification on Dynamic Compression Properties of Polypropylene/Muscovite Layered Silicate Composites
Properties of Concrete with Different Percentange of the Rice Husk Ash (RHA) as Partial Cement Replacement
An Innovation of the Palm Oil Based Wax as Industrial Wax for Machining Prototype Sustainable Products
Treatment Method for Dispersion of Carbon Nanotubes: A Review
Hybrid Microwave-Assisted Rapid Sintering Process for Fabrication of Sn-0.7Cu+1.0wt.%Si3N4 Composite Solder
Investigation of Epoxidized Natural Rubber (ENR 50) as a Compatibilizer on Cogon Grass Filled Low Density Polyethylene/Soya Spent Flour
Investigation of Noise Reduction Coefficient of Organic Material as Indoor Noise Reduction Panel
The Flexural Properties of Reinforced Recycled Glass Concrete Beam
Testing on Building Material Using Waste Material in Fired Clay Brick
Simulation of Nano Carbon Tube (NCT) in Thermal Interface Material for Electronic Packaging Application by Using CFD Software
Effect of Surface Modification on Strain Rate Sensitivity of Polypropylene/Muscovite Layered Silicate Composites
Tensile Properties of Linear Low Density Polyethylene/Rambutan Peels (Nephelium chryseum Blum.) Flour Blends
Chapter 4: Coating
The Effect of Si/Al Ratio and Sodium Silicate on the Mechanical Properties of Fly Ash Based Geopolymer for Coating
Microstructure Study on Cuprous Oxide Thin Films Deposited on n-Si Substrate via Sol-Gel Spin Coating Technique
Geopolymer: A Review on Physical Properties of Inorganic Aluminosilicate Coating Materials