Advanced Materials Engineering and Technology

Synthesis of TiO2-B2O3-Al Based Porous CompositesPreparation and Possible Agricultural Applications of Polymer Hydrogel Composite as Soil ConditionerStructural Study on Lithium-Barium Borophosphate Glasses Using Infrared and Raman SpectroscopyLuminescence Studies on Lithium-Strontium Borophosphate Glasses Doped with Cr, Ni and Zn IonsApplication of Biological-Based Antifungal Agent for Controlling the Growth of Wood Decaying Fungi of RubberwoodThe Effect of Substrate Temperatures on the Structural and Optical Properties of Cosputtered ZnO and AlN Thin FilmsThe Effect of Ultrasonic Treatment and Gamma Radiation on the Thermal Conductivity of TPNR Hybrid NanocompositesUnconfined Compressive Strength and Drying Shrinkage of Cement Treated Recycling Base at Boyolali-Kartosuro Road RehabilitationMixed Photocatalyst for Sustainable Concrete ConstructionUtilization of Raw Gypsum as Hydrated Filler in Bagasse Particleboard Bonded with a Formaldehyde-Free Epoxidized Natural Rubber AdhesiveThermoplastic Natural Rubber Based on Blending of Co-Polyester: Effect of Amount of Epoxide Groups in Epoxidized Natural Rubber on PrepertiesEffect of Sulfur Donor on Properties of Thermoplastic Vulcanizates Based on NR/PPThermoplastic Elastomer Based on Epoxidized Natural Rubber/Polyamide-12 and Co-Polyamide-12 BlendsPreparation of Natural Rubber/Sodium Montmorillonite Nanocomposites by Latex Mixing Method with Drying ProcessThermoplastic Natural Rubber Based on Blending of Maleated Natural Rubber and Copolyester: Effect of Blend Ratios on Mechanical, Thermal, Dynamic and Morphological PropertiesCo-Continuous Phase Structure and Properties of Poly(vinylidene Fluoride)/Epoxidized Natural Rubber BlendsInfluence of Zinc Oxide Contents on Mechanical, Rheological and Thermal Properties of Thermoplastic Natural RubberFundamental Studies on Cure Characteristics and Mechanical Properties of Nanocomposites Based on Epoxidized Natural Rubber (ENR-30) and Montmorillonite ClayComparing the Seismic Performance of Beam-Column Joints with and without SFRC when Subjected to Cyclic LoadingThe Impact of Mechanical Vibration on the Hardening of Metallic SurfaceOptimization of Process Parameters in Bioreduction of Silver Nanoparticles by Pycnoporus sanguineus Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite ComponentAn Experimental Study on the Die Roll Height According to the V-Ring Distance of the Fine Blanking Tool for the Seat Recliner Holder with Various Corner ShapesThe Carbon Black Sonofication Effects on Vulcanisate Properties of Natural RubberMechanical Properties of Engineered Cementitious Composite with Palm Oil Fuel Ash as a Supplementary BinderEffect of Different Olive Stone Particle Size on the Yield and Surface Area of Activated Carbon ProductionPreparation and Characterization of Fe3O4/TiO2 Composites by HeteroagglomerationA Study of Fe-Based Composite Coating Fabricated by the Self-Propagating High Temperature SynthesisEffect of Ar Gas Pressure on Phase Separation of Tungsten Silicides Intermetallic Compound In Situ Self-Propagating High Temperature Synthesis-Casting ProcessApplications of Acoustic Emission Technique Associated with the Fracture Process Zone in Concrete Beam ? A ReviewCharacteristics of Treated Palm Oil Fuel Ash and its Effects on Properties of High Strength ConcreteMorphological Structure of Pretreated Organo Layer Silicate Dispersion in Masterbatch Biodegradable Polymer Cassava Starch Clay NanocompositeEffect of RF Power on the Structural Properties of Magnetron Sputtered ZnO Thin Films Deposited at Room TemperatureSensitivity of ZnO Based NH3 Sensor by RF Magnetron SputteringSynthesis of Nano-Structured Ni-Co-Al Hydrotalcites and Derived Mixed OxidesAntibacterial Activity of Copper and CTAB Modified Clays against Pseudomonas aeruginosaThe Influence of Deposition Temperature on the Morphology and Corrosion Resistance of Zinc Phosphate Coating on Mild SteelDimensional Effect on DIBL in Silicon Nanowire TransistorsMethod of Search and Rescue in Dipterocarp Forest Using GPS TechnologyReal Time Synchrotron X-Ray Imaging for Nucleation and Growth of Cu6Sn5 in Sn-7Cu-0.05Ni High Temperature Lead-Free Solder AlloysComparison Studies of Blend and Unblend GPE Systems: Ionic Conductivity, Structural and Morphological PropertiesIonic Conductivity and Dielectric Properties of Plasticized Polyacrylonitrile Based Solid Polymer Electrolyte FilmsInvestigation of Vanadium Oxide Thin Film Deposited by Sputtering for Electrochromic ApplicationsPredictive Modeling of TiN Coating RoughnessEffects of Calcination Temperature of LUSI Mud on the Compressive Strength of Geopolymer MortarEffect of Antioxidant on Properties of Thermoplastic Natural Rubber Based on ENR/TPU BlendsEffect of Modified Natural Rubber on Properties of Thermoplastic Natural Rubber Based on Co-Polyamide BlendsComparative Properties of Vegetable Oil-Based Benzyl Esters and Vegetable Oils as Processing Oil in Natural Rubber CompoundsInfluence of Processing Oil and Plasticizer on Properties of ENR-25/TPU Simple BlendsShrinkage Characteristics of Green Engineered Cementitious Composites with Varying Palm Oil Fuel Ash Contents and Water-Binder RatiosFusion Bonding of Carbon Fiber Reinforced Epoxy LaminatesThe Effect of Hybridization of the Glass Fiber-Flexible Modified Epoxy and Rigid Epoxy Composite Properties under Low-Velocity ImpactEffects of Feeding Angles and Cutting Speeds of a Mower Knife with Serrated Edges on the Pulverization of Sweet Potato VinesThe Role of Silica Fume in the Adhesion of Concrete Restoration SystemsOptimization of Material Removal Rate in EDM Using Taguchi MethodCorrosion Behavior of AZ91 Mg-Alloy Coated with AlN and TiN in NaCl and Hank's SolutionPhysical and Mechanical Properties of Glass Composite Material Made from Incinerated Scheduled Waste Slag and SLS Waste GlassBET Analysis on Carbon Nanotubes: Comparison between Single and Double Stage Thermal CVD MethodRheological Properties of Zirconia Toughened Alumina Powder for Ceramic Injection MoldingCharacterization of TiAlBN Nanocomposite Coating Deposited via Radio Frequency Magnetron Sputtering Using Single Hot-Pressed TargetEffect of Annealing Temperature on Surface Morphology of Lanthanum Phosphate (LaPO4) Nanostructures Thin FilmsEffect of Multiwall Carbon Nanotubes (MWCNT) on Mechanical and Electrical Properties of PP/C Composites as Alternative Materials for Bipolar Plate Fuel CellThe Study of the Surface Morphology of PVDF/MgO Nanocomposites Thin FilmsSurface Modification of Polyvinylidenefluoride-Trifluoroethylene Film Using Argon Gas PlasmaOptical Properties and Antibacterial Bioactivity of ZnO Nanopowder Annealed in Different AmbientEffect of Calcinations Temperature on the Structural and Photocatalytic Activity of TiO2 Powders Prepared by Sol-Gel MethodPhotocatalytic Activity under UV of TiO2 Powders Compared with Commercial P25Development of Hydroxyapatite Layer on Superplastic Ti-6Al-4V for Biomaterials ApplicationsEvaluation of Silica Fume Effect on Compressive Strength of Structural Lightweight Concrete Containing LECA as Lightweight AggregateImprovement of Hydrophobicity of Urea Modified Tapioca Starch Film with Lignin for Slow Release FertilizerQuantitative Evaluation of the Relationship between Tensile Crack and Shear Movement in Concrete BeamsEffect of Soya Bean Flour Content on Mechanical Properties and Biodegradability of Poly(vinyl Alcohol) FilmEffect of Natural Antioxidants on Curing Characteristics and Crosslink Density of Natural Rubber VulcanisateAn Overview Current Application of Artificial Neural Network in ConcreteInfluence of Waste Paper Sludge Ash (WPSA) and Fine Recycled Concrete Aggregate (FRCA) on the Compressive Strength Characteristic of Foamed ConcreteNumerical and Experimental Studies on Extrusion of Fan-Shaped Shell of Magnesium AlloyEffects of Homogenizing and Extrusion on Elongation of As-Cast AZ80 Magnesium AlloyThe Influence of Fly Ash Addition on the Compressive Strength of Concrete Containing Recycle Concrete AggregatesInvestigation of the Geometry Modeling of Metal Organic Halide Vapor Phase Epitaxy (MOHVPE) ReactorCdSe Thin Film by Using Spin-CoatingEffect of Steel and Alkaline-Resistance Glass Fibre on Mechanical and Durability Properties of Lightweight Foamed ConcreteA Novel Porous-Polymer-Supported Ru(II)-dm-Pheox Catalyst and its Application in Highly Efficient N-H Insertion ReactionsViscosity Effect on Piezoelectric Actuated Nozzle in Generating Micro DropletParameter Optimerization for Photo Polymerization of MicrostereolithographyCharacterization of Titanium Dioxide Nanopowder Synthesized by Sol Gel Grinding MethodEffects of Cobalt Addition and Temperature on Microstructure and Density of W-25Cu Composites Prepared via Liquid InfiltrationInvestigation on Fabricating High Aspect Ratio Microholes on Silicon by FIB/SEM MillingA Study of Unmanned Aerial Vehicle Photogrammetry for Environment Mapping: Preliminary ObservationMicrostructural Evolution in Partially Homogenized AZ91 Alloy during Hot Rolling and Interpass AnnealingThe Influence of AlkaliTreatment and Compatibilizer Addition on the Tensile Properties and Water Absorption Behavior of Polypropylene/Kenaf Fiber CompositesRole of Salt Concentration Lithium Perchlorate on Ionic Conductivity and Structural of (Glycidyl Methacrylate-co-Ethyl Methacrylate) (70/30) Based on a Solid Polymer ElectrolyteSimulation and Analysis for Harvesting Dioscorea hispida TubersDevelopment of Novel Detection Device for Chemical Properties of Dioscorea hispidaThe Factors Affecting the Swelling of W?Bronze Composite System at Different Sintering ConditionsIsolation and Characterization of Cellulose Producing Bacterial Strain from Orange PulpEffect of Voltage and Suspension Medium on Stanum Oxide (SnO2) Film Prepared by Electrophoretic Deposition (EPD)Evaluation on the Thermal Conductivity of Sand-Cement Blocks with Kenaf FiberComparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core MaterialsSynthesis of Polylactic Acid from Fermentative Lactic Acid by Direct Polycondensation for Materials ApplicationMisfit Dislocation Reduction of InxGa1-xN/GaN Heteroepitaxy Using Graded LayerChar Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC)Co2 Solubility in Silica Supported [hmim][Tf2N]Stability of Created Nano-Holes from Electrodeposited Organic SAMs (Thiols) on Gold Polycrystalline FilmsEffects of Activating Flux on Inconel 718 Alloy and AISI 304 Stainless Steel Dissimilar TIG WeldsPreparation and Characterization of Rice Husk Powder Incorporated Natural Rubber Latex FoamAqueous Dispersion of Rice Husk Powder as a Compatible Filler for Natural Rubber Latex FoamEffect of Ball Milling Parameters on the Synthesization of Carbon Nanotube Aluminium Nano CompositeTensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg TrayComparative Study between Candida antarctica Lipase B and Pseudomonas floroscens as Catalyst for Polycaprolactone ProductionLow Temperature Catalytic Steam Gasification of Waste Palm Trunk by Pottasium Carbonate Supported on Perovskite OxideExperimental Investigation on the Shear Behaviour of Concrete Beams Reinforced with GFRP Reinforcement BarsQuality Evaluation of Cold Embossed Hole Based on Profile Measurement TechniqueThe Effect of pH on Zinc Phosphate Coating Morphology and its Corrosion Resistance on Mild SteelDifferences between 2D and 3D Interlaminar Fracture Analysis of Unidirectional Carbon/Epoxy Arcan Specimens: Numerical and Experimental ApproachesFabrication and Photoresponse of Self-Organized TiO2 Mesoporous by Alternative Voltage ConditionDevelopment of Lubricants Evaluation for Different Friction Laws by Using Rigid-Plastic Finite Element MethodEnergy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity ImpactEffects of Various Additives on Drying Shrinkage, Compressive and Flexural Strength of Lightweight Foamed Concrete (LFC)Effects of Cavity Length on Optical Characteristics of Deep Violet InGaN DQW LasersEffect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn AlloysA Study on the Rheological Properties of Low-Density Polyethylene/Palm Kernel Shell CompositesEffect of Post-Heated Concrete Cylinders Repaired with CFRP ReinforcementStudy on Performance and Characteristic of Microorganisms in a Waste-to-Energy System
In Vitro Biodegradability of Poly(lactic Acid)/Hydroxyapatite Biocomposites Prepared by Solvent-Blending TechniqueImproving Surface Durability of High Volume Fly Ash Concrete with Application of Alkali SolutionEffect of Silane Coupling Agent on the Curing, Tensile, Thermal, and Swelling Properties of EPDM/Mica CompositesComparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core MaterialsEffects of Silane Coupling Agent on Mechanical Properties and Swelling Behaviour of Coconut Fiber Filled Polypropylene CompositeStudy of Cold Rotary Forming by Using Rigid-Plastic Finite Element MethodCytostatic Activity of Clinoptilolite against Human Cervical Cancer Cell Lines Using Three Different Media-Sterilization TechniquesMorphological and Structural Study of Nanostructured Tin Dioxide (SnO2) Thin Films by Spray PyrolysisMoisture Absorption and Shock Cushioning Behavior of Flexible Polyurethane Foam Filled with Saw DustEffect of EDA/PEGDGE Mole Ratios on PEG-Based Hydrogel Scaffolds PropertiesThermophysical Properties of Ionic Liquid with Thiocyanate Anion: Effect of CationsPrinting Qualities on Inkjet-Printed Paper from Varnish Coating Agent with Rice Husk Silica ParticlesEffect of Partial Replacements of Sand by Waste Rubber on the Low Impact Resistance of ConcreteStudies on Dissimilar Welding of AA5083 and AA6061 Alloys by Laser Beam WeldingComparison on Pore Development of Activated Carbon Produced from Scrap Tire by Hydrochloric Acid and Sulfuric AcidMechanical Properties and Morphologies of PP/Co-PP/Talc Composites for Microwave ApplicationStructures and Properties of Isotactic-Polypropylene/Synthesized Micro Cellulose Tray: Effects of Micro Cellulose LoadingOptimization of Annealing Temperature for PVDF-TrFE (70:30 mol %) Thin FilmThe Structural Studies of Oxirane Ring Opening Reaction in Epoxidized Natural Rubber (ENR-50) by SnCl2.2H2O and the Formation of ENR/TiN Complex HybridCharacteristics of Fe-Yttria Composites Fabricated by Powder Metallurgy MethodVaristor-Like Effect in Zinc Oxide BionanocompositeEfflorescence Phenomenon on Concrete StructuresEffects of Zinc Chloride Impregnation on the Characteristics of Activated Carbon Produced from Physic Nut Seed HullStudy on Renewable Resource-Based Composites from Agro Waste Alpinia galanga Natural FibersContribution of Polypropylene Fibre in Improving Strength of Foamed ConcreteEffect of Uncontrolled Burning Rice Husk Ash in Foamed ConcreteThe Evaluation of High Calcium Green Polymeric ConcreteLightweight Fly Ash-Based Geopolymer ConcreteEffect of Diluents on Crystallite Size and Electronic Band Gap of ZnO Nanoparticles Synthesized by Mechanochemical ProcessingResearch Advances of Composite Solder Material Fabricated via Powder Metallurgy RouteResearch Development of Solder Materials and its Intermetallic Compound (IMC) StudyThe Effects of Tensile and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) BlendsCharacteristics of Corrosion Degradation in Carbon Steel Pipelines
Bacillus megaterium sp. as Degradation Agent for Biodegradable Natural Rubber Latex FilmsEffect of Nanosilica Fillers on the Cure Characteristics and Mechanical Properties of Natural Rubber CompositesSynthesis of Porous Silica via Styrene Natural Rubber Sacrificial TemplateThe Effects of Kenaf Loadings and 3-aminopropyltriethoxysilane (APTES) Coupling Agent on Mechanical Properties of Polypropylene/Waste Tire Dust/Kenaf (Pp/WTD/KNF) CompositesIodine Doping of Amorphous Carbon Thin Films Deposited by Thermal CVDEffect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite AggregatePost-Growth Annealing Effects on the Photoluminescence of ZnO Nanoparticle-Based DiscsMicrostructures Study on Cuprous Oxide Thin Films Deposited on Different Substrates by Using Sol-Gel TechniqueUltra Compact 1?11 Power Splitter Using Polydiacetylene Multimode Interference CouplerThe Influence of Micro Algae on Corrosion of Steel in Fly Ash Geopolymer Concrete: A Preliminary StudyA Brief Review of the Current Technologies Used for the Fabrication of Metal-Molecule-Metal Junction ElectrodesApplication of Clay - Based Geopolymer in Brick Production: A ReviewEffect of Cobalt Stearate on Outdoor Exposure of LLDPE/Soy Spent Powder BlendsPreparation of Activated Carbon from Durian Shell and SeedReviews on the Properties of Aggregates Made with or without Geopolymerisation MethodA Three Dimensional Finite Element of Anterior Cruciate Ligament ModelDevelopment of Bioreactor System for Generating Three-Dimensional (3D) Tissue EngineeringSynthesis of Eu2+, Dy3+ Co-Doped Mal2O4 Phosphor (M = Ba, Sr) by In Situ Self-Propagating High Temperature SynthesisX-Ray Powder Diffraction Studies of Mechanically Milled CobaltFeasibility of Producing Wood Fibre-Reinforced Geopolymer Composites (WFRGC)Strength and Microstructural Properties of Mechanically-Activated Kaolin GeopolymersEffect of Curing Regimes on Metakaolin Geopolymer Pastes Produced from Geopolymer PowderThe Effect of Curing Time on the Properties of Fly Ash-Based Geopolymer BricksParametric Study and Thickness Evaluation of Photoresist Development for the Formation of Microgap Electrodes Using Surface NanoprofilerMaterial Characterization of Al-Si/SiCpp Composite via Pressureless Infiltration Using Polystyrene as External BinderClassification of Damage Mode of Reinforced Concrete Beams Using Acoustic Emission TechniqueReviews on the Geopolymer Materials for Coating ApplicationPotential of Marine Clay as Raw Material in Geopolymer CompositeEffects of Annealing Treatment on Structural, Optical and Morphology Characteristics of ZnO NanostructuresEffect of Soil Type in Compressed Earth Brick (CEB) with Uncontrolled Burnt Rice Husk Ash (RHA)Critical Size Structure Parameters for Au NanoparticlesThree Dimensional Simulation of Thermal Pad Using Nanomaterial, Nanosilver in Semiconductor and Electronic Component ApplicationSynergistic Effect on Flexural Properties of Kenaf-Glass Hybrid CompositeEffect of Blockage Size on Pipe VibrationReview of Extraction of Silica from Agricultural Wastes Using Acid Leaching TreatmentStudy on Milling Periods on the Iron Mill Scale Particle Size and PropertiesPotential Application of Palm Ash as a Raw Materials in Production of Green GlassThe Effects of Rattan Filler Loadings on Mechanical Properties and Morphological Study of Rattan Powder Filled-Polypropylene CompositesEffect of Pyrolysis on the Wettability Behaviour of Polyethylene Terephthalate on Petroleum CokeExperimental of Wood Gasification in Suction Biomass GasifierNano-Optical Fiber Evanescent Field SensorsFT-IR and Morphology of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRgr) Size and its Blend Ratios of SBR/NBRr BlendsOn the Crushing Behavior of Foam-Filled Composite Tubes under Compressive LoadingFabrication of Nanowire Using Ash Trimming TechniqueLow Density Polyethylene (LDPE)/Thermoplastic Sago Starch (TPSS) Blend Filled with Kenaf Core Fiber (KCF)