Advanced Materials Engineering and Technology

<ul><li>Preface and Committees</li><li>Synthesis of TiO₂-B₂O₃-Al Based Porous Composites</li><li>Preparation and Possible Agricultural Applications of Polymer Hydrogel Composite as Soil Conditioner</li><li>Structural Study on Lithium-Barium Borophosphate Glasses Using Infrared and Raman Spectroscopy</li><li>Luminescence Studies on Lithium-Strontium Borophosphate Glasses Doped with Cr, Ni and Zn Ions</li><li>Application of Biological-Based Antifungal Agent for Controlling the Growth of Wood Decaying Fungi of Rubberwood</li><li>The Effect of Substrate Temperatures on the Structural and Optical Properties of Cosputtered ZnO and AlN Thin Films</li><li>The Effect of Ultrasonic Treatment and Gamma Radiation on the Thermal Conductivity of TPNR Hybrid Nanocomposites</li><li>Unconfined Compressive Strength and Drying Shrinkage of Cement Treated Recycling Base at Boyolali-Kartosuro Road Rehabilitation</li><li>Mixed Photocatalyst for Sustainable Concrete Construction</li><li>Utilization of Raw Gypsum as Hydrated Filler in Bagasse Particleboard Bonded with a Formaldehyde-Free Epoxidized Natural Rubber Adhesive</li><li>Thermoplastic Natural Rubber Based on Blending of Co-Polyester: Effect of Amount of Epoxide Groups in Epoxidized Natural Rubber on Preperties</li><li>Effect of Sulfur Donor on Properties of Thermoplastic Vulcanizates Based on NR/PP</li><li>Thermoplastic Elastomer Based on Epoxidized Natural Rubber/Polyamide-12 and Co-Polyamide-12 Blends</li><li>Preparation of Natural Rubber/Sodium Montmorillonite Nanocomposites by Latex Mixing Method with Drying Process</li><li>Thermoplastic Natural Rubber Based on Blending of Maleated Natural Rubber and Copolyester: Effect of Blend Ratios on Mechanical, Thermal, Dynamic and Morphological Properties</li><li>Co-Continuous Phase Structure and Properties of Poly(vinylidene Fluoride)/Epoxidized Natural Rubber Blends</li><li>Influence of Zinc Oxide Contents on Mechanical, Rheological and Thermal Properties of Thermoplastic Natural Rubber</li><li>Fundamental Studies on Cure Characteristics and Mechanical Properties of Nanocomposites Based on Epoxidized Natural Rubber (ENR-30) and Montmorillonite Clay</li><li>Comparing the Seismic Performance of Beam-Column Joints with and without SFRC when Subjected to Cyclic Loading</li><li>The Impact of Mechanical Vibration on the Hardening of Metallic Surface</li><li>Optimization of Process Parameters in Bioreduction of Silver Nanoparticles by <i>Pycnoporus sanguineus </i></li><li>Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component</li><li>An Experimental Study on the Die Roll Height According to the V-Ring Distance of the Fine Blanking Tool for the Seat Recliner Holder with Various Corner Shapes</li><li>The Carbon Black Sonofication Effects on Vulcanisate Properties of Natural Rubber</li><li>Mechanical Properties of Engineered Cementitious Composite with Palm Oil Fuel Ash as a Supplementary Binder</li><li>Effect of Different Olive Stone Particle Size on the Yield and Surface Area of Activated Carbon Production</li><li>Preparation and Characterization of Fe₃O₄/TiO₂ Composites by Heteroagglomeration</li><li>A Study of Fe-Based Composite Coating Fabricated by the Self-Propagating High Temperature Synthesis</li><li>Effect of Ar Gas Pressure on Phase Separation of Tungsten Silicides Intermetallic Compound <i><i>In Situ</i></i> Self-Propagating High Temperature Synthesis-Casting Process</li><li>Applications of Acoustic Emission Technique Associated with the Fracture Process Zone in Concrete Beam - A Review</li><li>Characteristics of Treated Palm Oil Fuel Ash and its Effects on Properties of High Strength Concrete</li><li>Morphological Structure of Pretreated Organo Layer Silicate Dispersion in Masterbatch Biodegradable Polymer Cassava Starch Clay Nanocomposite</li><li>Effect of RF Power on the Structural Properties of Magnetron Sputtered ZnO Thin Films Deposited at Room Temperature</li><li>Sensitivity of ZnO Based NH₃ Sensor by RF Magnetron Sputtering</li><li>Synthesis of Nano-Structured Ni-Co-Al Hydrotalcites and Derived Mixed Oxides</li><li>Antibacterial Activity of Copper and CTAB Modified Clays against <i>Pseudomonas aeruginosa</i></li><li>The Influence of Deposition Temperature on the Morphology and Corrosion Resistance of Zinc Phosphate Coating on Mild Steel</li><li>Dimensional Effect on DIBL in Silicon Nanowire Transistors</li><li>Method of Search and Rescue in Dipterocarp Forest Using GPS Technology</li><li>Real Time Synchrotron X-Ray Imaging for Nucleation and Growth of Cu₆Sn₅ in Sn-7Cu-0.05Ni High Temperature Lead-Free Solder Alloys</li><li>Comparison Studies of Blend and Unblend GPE Systems: Ionic Conductivity, Structural and Morphological Properties</li><li>Ionic Conductivity and Dielectric Properties of Plasticized Polyacrylonitrile Based Solid Polymer Electrolyte Films</li><li>Investigation of Vanadium Oxide Thin Film Deposited by Sputtering for Electrochromic Applications</li><li>Predictive Modeling of TiN Coating Roughness</li><li>Effects of Calcination Temperature of LUSI Mud on the Compressive Strength of Geopolymer Mortar</li><li>Effect of Antioxidant on Properties of Thermoplastic Natural Rubber Based on ENR/TPU Blends</li><li>Effect of Modified Natural Rubber on Properties of Thermoplastic Natural Rubber Based on Co-Polyamide Blends</li><li>Comparative Properties of Vegetable Oil-Based Benzyl Esters and Vegetable Oils as Processing Oil in Natural Rubber Compounds</li><li>Influence of Processing Oil and Plasticizer on Properties of ENR-25/TPU Simple Blends</li><li>Shrinkage Characteristics of Green Engineered Cementitious Composites with Varying Palm Oil Fuel Ash Contents and Water-Binder Ratios</li><li>Fusion Bonding of Carbon Fiber Reinforced Epoxy Laminates</li><li>The Effect of Hybridization of the Glass Fiber-Flexible Modified Epoxy and Rigid Epoxy Composite Properties under Low-Velocity Impact</li><li>Effects of Feeding Angles and Cutting Speeds of a Mower Knife with Serrated Edges on the Pulverization of Sweet Potato Vines</li><li>The Role of Silica Fume in the Adhesion of Concrete Restoration Systems</li><li>Optimization of Material Removal Rate in EDM Using Taguchi Method</li><li>Corrosion Behavior of AZ91 Mg-Alloy Coated with AlN and TiN in NaCl and Hank's Solution</li><li>Physical and Mechanical Properties of Glass Composite Material Made from Incinerated Scheduled Waste Slag and SLS Waste Glass</li><li>BET Analysis on Carbon Nanotubes: Comparison between Single and Double Stage Thermal CVD Method</li><li>Rheological Properties of Zirconia Toughened Alumina Powder for Ceramic Injection Molding</li><li>Characterization of TiAlBN Nanocomposite Coating Deposited via Radio Frequency Magnetron Sputtering Using Single Hot-Pressed Target</li><li>Effect of Annealing Temperature on Surface Morphology of Lanthanum Phosphate (LaPO₄) Nanostructures Thin Films</li><li>Effect of Multiwall Carbon Nanotubes (MWCNT) on Mechanical and Electrical Properties of PP/C Composites as Alternative Materials for Bipolar Plate Fuel Cell</li><li>The Study of the Surface Morphology of PVDF/MgO Nanocomposites Thin Films</li><li>Surface Modification of Polyvinylidenefluoride-Trifluoroethylene Film Using Argon Gas Plasma</li><li>Optical Properties and Antibacterial Bioactivity of ZnO Nanopowder Annealed in Different Ambient</li><li>Effect of Calcinations Temperature on the Structural and Photocatalytic Activity of TiO₂ Powders Prepared by Sol-Gel Method</li><li>Photocatalytic Activity under UV of TiO₂ Powders Compared with Commercial P25</li><li>Development of Hydroxyapatite Layer on Superplastic Ti-6Al-4V for Biomaterials Applications</li><li>Evaluation of Silica Fume Effect on Compressive Strength of Structural Lightweight Concrete Containing LECA as Lightweight Aggregate</li><li>Improvement of Hydrophobicity of Urea Modified Tapioca Starch Film with Lignin for Slow Release Fertilizer</li><li>Quantitative Evaluation of the Relationship between Tensile Crack and Shear Movement in Concrete Beams</li><li>Effect of Soya Bean Flour Content on Mechanical Properties and Biodegradability of Poly(vinyl Alcohol) Film</li><li>Effect of Natural Antioxidants on Curing Characteristics and Crosslink Density of Natural Rubber Vulcanisate</li><li>An Overview Current Application of Artificial Neural Network in Concrete</li><li>Influence of Waste Paper Sludge Ash (WPSA) and Fine Recycled Concrete Aggregate (FRCA) on the Compressive Strength Characteristic of Foamed Concrete</li><li>Numerical and Experimental Studies on Extrusion of Fan-Shaped Shell of Magnesium Alloy</li><li>Effects of Homogenizing and Extrusion on Elongation of As-Cast AZ80 Magnesium Alloy</li><li>The Influence of Fly Ash Addition on the Compressive Strength of Concrete Containing Recycle Concrete Aggregates</li><li>Investigation of the Geometry Modeling of Metal Organic Halide Vapor Phase Epitaxy (MOHVPE) Reactor</li><li>CdSe Thin Film by Using Spin-Coating</li><li>Effect of Steel and Alkaline-Resistance Glass Fibre on Mechanical and Durability Properties of Lightweight Foamed Concrete</li><li>A Novel Porous-Polymer-Supported Ru(II)-<i>dm</i>-Pheox Catalyst and its Application in Highly Efficient N-H Insertion Reactions</li><li>Viscosity Effect on Piezoelectric Actuated Nozzle in Generating Micro Droplet</li><li>Parameter Optimerization for Photo Polymerization of Microstereolithography</li><li>Characterization of Titanium Dioxide Nanopowder Synthesized by Sol Gel Grinding Method</li><li>Effects of Cobalt Addition and Temperature on Microstructure and Density of W-25Cu Composites Prepared via Liquid Infiltration</li><li>Investigation on Fabricating High Aspect Ratio Microholes on Silicon by FIB/SEM Milling</li><li>A Study of Unmanned Aerial Vehicle Photogrammetry for Environment Mapping: Preliminary Observation</li><li>Microstructural Evolution in Partially Homogenized AZ91 Alloy during Hot Rolling and Interpass Annealing</li><li>The Influence of AlkaliTreatment and Compatibilizer Addition on the Tensile Properties and Water Absorption Behavior of Polypropylene/Kenaf Fiber Composites</li><li>Role of Salt Concentration Lithium Perchlorate on Ionic Conductivity and Structural of (Glycidyl Methacrylate-co-Ethyl Methacrylate) (70/30) Based on a Solid Polymer Electrolyte</li><li>Simulation and Analysis for Harvesting <i>Dioscorea hispida </i>Tubers</li><li>Development of Novel Detection Device for Chemical Properties of <i>Dioscorea hispida</i></li><li>The Factors Affecting the Swelling of W-Bronze Composite System at Different Sintering Conditions</li><li>Isolation and Characterization of Cellulose Producing Bacterial Strain from Orange Pulp</li><li>Effect of Voltage and Suspension Medium on Stanum Oxide (SnO₂) Film Prepared by Electrophoretic Deposition (EPD)</li><li>Evaluation on the Thermal Conductivity of Sand-Cement Blocks with Kenaf Fiber</li><li>Comparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core Materials</li><li>Synthesis of Polylactic Acid from Fermentative Lactic Acid by Direct Polycondensation for Materials Application</li><li>Misfit Dislocation Reduction of In_xGa_1-xN/GaN Heteroepitaxy Using Graded Layer</li><li>Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC)</li><li>Co₂ Solubility in Silica Supported [hmim][Tf₂N]</li><li>Stability of Created Nano-Holes from Electrodeposited Organic SAMs (Thiols) on Gold Polycrystalline Films</li><li>Effects of Activating Flux on Inconel 718 Alloy and AISI 304 Stainless Steel Dissimilar TIG Welds</li><li>Preparation and Characterization of Rice Husk Powder Incorporated Natural Rubber Latex Foam</li><li>Aqueous Dispersion of Rice Husk Powder as a Compatible Filler for Natural Rubber Latex Foam</li><li>Effect of Ball Milling Parameters on the Synthesization of Carbon Nanotube Aluminium Nano Composite</li><li>Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray</li><li>Comparative Study between <i>Candida antarctica</i> Lipase B and <i>Pseudomonas floroscens</i> as Catalyst for Polycaprolactone Production</li><li>Low Temperature Catalytic Steam Gasification of Waste Palm Trunk by Pottasium Carbonate Supported on Perovskite Oxide</li><li>Experimental Investigation on the Shear Behaviour of Concrete Beams Reinforced with GFRP Reinforcement Bars</li><li>Quality Evaluation of Cold Embossed Hole Based on Profile Measurement Technique</li><li>The Effect of pH on Zinc Phosphate Coating Morphology and its Corrosion Resistance on Mild Steel</li><li>Differences between 2D and 3D Interlaminar Fracture Analysis of Unidirectional Carbon/Epoxy Arcan Specimens: Numerical and Experimental Approaches</li><li>Fabrication and Photoresponse of Self-Organized TiO₂ Mesoporous by Alternative Voltage Condition</li><li>Development of Lubricants Evaluation for Different Friction Laws by Using Rigid-Plastic Finite Element Method</li><li>Energy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity Impact</li><li>Effects of Various Additives on Drying Shrinkage, Compressive and Flexural Strength of Lightweight Foamed Concrete (LFC)</li><li>Effects of Cavity Length on Optical Characteristics of Deep Violet InGaN DQW Lasers</li><li>Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys</li><li>A Study on the Rheological Properties of Low-Density Polyethylene/Palm Kernel Shell Composites</li><li>Effect of Post-Heated Concrete Cylinders Repaired with CFRP Reinforcement</li><li>Study on Performance and Characteristic of Microorganisms in a Waste-to-Energy System</li><li>
<i>In Vitro</i> Biodegradability of Poly(lactic Acid)/Hydroxyapatite Biocomposites Prepared by Solvent-Blending Technique</li><li>Improving Surface Durability of High Volume Fly Ash Concrete with Application of Alkali Solution</li><li>Effect of Silane Coupling Agent on the Curing, Tensile, Thermal, and Swelling Properties of EPDM/Mica Composites</li><li>Comparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core Materials</li><li>Effects of Silane Coupling Agent on Mechanical Properties and Swelling Behaviour of Coconut Fiber Filled Polypropylene Composite</li><li>Study of Cold Rotary Forming by Using Rigid-Plastic Finite Element Method</li><li>Cytostatic Activity of Clinoptilolite against Human Cervical Cancer Cell Lines Using Three Different Media-Sterilization Techniques</li><li>Morphological and Structural Study of Nanostructured Tin Dioxide (SnO₂) Thin Films by Spray Pyrolysis</li><li>Moisture Absorption and Shock Cushioning Behavior of Flexible Polyurethane Foam Filled with Saw Dust</li><li>Effect of EDA/PEGDGE Mole Ratios on PEG-Based Hydrogel Scaffolds Properties</li><li>Thermophysical Properties of Ionic Liquid with Thiocyanate Anion: Effect of Cations</li><li>Printing Qualities on Inkjet-Printed Paper from Varnish Coating Agent with Rice Husk Silica Particles</li><li>Effect of Partial Replacements of Sand by Waste Rubber on the Low Impact Resistance of Concrete</li><li>Studies on Dissimilar Welding of AA5083 and AA6061 Alloys by Laser Beam Welding</li><li>Comparison on Pore Development of Activated Carbon Produced from Scrap Tire by Hydrochloric Acid and Sulfuric Acid</li><li>Mechanical Properties and Morphologies of PP/Co-PP/Talc Composites for Microwave Application</li><li>Structures and Properties of Isotactic-Polypropylene/Synthesized Micro Cellulose Tray: Effects of Micro Cellulose Loading</li><li>Optimization of Annealing Temperature for PVDF-TrFE (70:30 mol %) Thin Film</li><li>The Structural Studies of Oxirane Ring Opening Reaction in Epoxidized Natural Rubber (ENR-50) by SnCl₂.2H₂O and the Formation of ENR/TiN Complex Hybrid</li><li>Characteristics of Fe-Yttria Composites Fabricated by Powder Metallurgy Method</li><li>Varistor-Like Effect in Zinc Oxide Bionanocomposite</li><li>Efflorescence Phenomenon on Concrete Structures</li><li>Effects of Zinc Chloride Impregnation on the Characteristics of Activated Carbon Produced from Physic Nut Seed Hull</li><li>Study on Renewable Resource-Based Composites from Agro Waste <i>Alpinia galanga </i>Natural Fibers</li><li>Contribution of Polypropylene Fibre in Improving Strength of Foamed Concrete</li><li>Effect of Uncontrolled Burning Rice Husk Ash in Foamed Concrete</li><li>The Evaluation of High Calcium Green Polymeric Concrete</li><li>Lightweight Fly Ash-Based Geopolymer Concrete</li><li>Effect of Diluents on Crystallite Size and Electronic Band Gap of ZnO Nanoparticles Synthesized by Mechanochemical Processing</li><li>Research Advances of Composite Solder Material Fabricated via Powder Metallurgy Route</li><li>Research Development of Solder Materials and its Intermetallic Compound (IMC) Study</li><li>The Effects of Tensile and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends</li><li>Characteristics of Corrosion Degradation in Carbon Steel Pipelines</li><li>
<i>Bacillus megaterium sp. </i>as Degradation Agent for Biodegradable Natural Rubber Latex Films</li><li>Effect of Nanosilica Fillers on the Cure Characteristics and Mechanical Properties of Natural Rubber Composites</li><li>Synthesis of Porous Silica via Styrene Natural Rubber Sacrificial Template</li><li>The Effects of Kenaf Loadings and 3-aminopropyltriethoxysilane (APTES) Coupling Agent on Mechanical Properties of Polypropylene/Waste Tire Dust/Kenaf (Pp/WTD/KNF) Composites</li><li>Iodine Doping of Amorphous Carbon Thin Films Deposited by Thermal CVD</li><li>Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate</li><li>Post-Growth Annealing Effects on the Photoluminescence of ZnO Nanoparticle-Based Discs</li><li>Microstructures Study on Cuprous Oxide Thin Films Deposited on Different Substrates by Using Sol-Gel Technique</li><li>Ultra Compact 1x11 Power Splitter Using Polydiacetylene Multimode Interference Coupler</li><li>The Influence of Micro Algae on Corrosion of Steel in Fly Ash Geopolymer Concrete: A Preliminary Study</li><li>A Brief Review of the Current Technologies Used for the Fabrication of Metal-Molecule-Metal Junction Electrodes</li><li>Application of Clay - Based Geopolymer in Brick Production: A Review</li><li>Effect of Cobalt Stearate on Outdoor Exposure of LLDPE/Soy Spent Powder Blends</li><li>Preparation of Activated Carbon from Durian Shell and Seed</li><li>Reviews on the Properties of Aggregates Made with or without Geopolymerisation Method</li><li>A Three Dimensional Finite Element of Anterior Cruciate Ligament Model</li><li>Development of Bioreactor System for Generating Three-Dimensional (3D) Tissue Engineering</li><li>Synthesis of Eu²⁺, Dy³⁺Co-Doped Mal₂O₄Phosphor (M = Ba, Sr) by <i>In Situ</i> Self-Propagating High Temperature Synthesis</li><li>X-Ray Powder Diffraction Studies of Mechanically Milled Cobalt</li><li>Feasibility of Producing Wood Fibre-Reinforced Geopolymer Composites (WFRGC)</li><li>Strength and Microstructural Properties of Mechanically-Activated Kaolin Geopolymers</li><li>Effect of Curing Regimes on Metakaolin Geopolymer Pastes Produced from Geopolymer Powder</li><li>The Effect of Curing Time on the Properties of Fly Ash-Based Geopolymer Bricks</li><li>Parametric Study and Thickness Evaluation of Photoresist Development for the Formation of Microgap Electrodes Using Surface Nanoprofiler</li><li>Material Characterization of Al-Si/SiCp_p Composite via Pressureless Infiltration Using Polystyrene as External Binder</li><li>Classification of Damage Mode of Reinforced Concrete Beams Using Acoustic Emission Technique</li><li>Reviews on the Geopolymer Materials for Coating Application</li><li>Potential of Marine Clay as Raw Material in Geopolymer Composite</li><li>Effects of Annealing Treatment on Structural, Optical and Morphology Characteristics of ZnO Nanostructures</li><li>Effect of Soil Type in Compressed Earth Brick (CEB) with Uncontrolled Burnt Rice Husk Ash (RHA)</li><li>Critical Size Structure Parameters for Au Nanoparticles</li><li>Three Dimensional Simulation of Thermal Pad Using Nanomaterial, Nanosilver in Semiconductor and Electronic Component Application</li><li>Synergistic Effect on Flexural Properties of Kenaf-Glass Hybrid Composite</li><li>Effect of Blockage Size on Pipe Vibration</li><li>Review of Extraction of Silica from Agricultural Wastes Using Acid Leaching Treatment</li><li>Study on Milling Periods on the Iron Mill Scale Particle Size and Properties</li><li>Potential Application of Palm Ash as a Raw Materials in Production of Green Glass</li><li>The Effects of Rattan Filler Loadings on Mechanical Properties and Morphological Study of Rattan Powder Filled-Polypropylene Composites</li><li>Effect of Pyrolysis on the Wettability Behaviour of Polyethylene Terephthalate on Petroleum Coke</li><li>Experimental of Wood Gasification in Suction Biomass Gasifier</li><li>Nano-Optical Fiber Evanescent Field Sensors</li><li>FT-IR and Morphology of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRgr) Size and its Blend Ratios of SBR/NBRr Blends</li><li>On the Crushing Behavior of Foam-Filled Composite Tubes under Compressive Loading</li><li>Fabrication of Nanowire Using Ash Trimming Technique</li><li>Low Density Polyethylene (LDPE)/Thermoplastic Sago Starch (TPSS) Blend Filled with Kenaf Core Fiber (KCF)</li></ul>