Advanced Materials Engineering and Technology II

Application of InN Based Quantum Dot in Reducing Short Circuit Current Variation of Solar Cell above Room TemperatureInfluence of Dolomite on the Mechanical Properties of Boiler Ash Geopolymer PasteEffect of Varying Mixed Refrigerant Composition on Main Cryogenic Heat Exchanger PerformanceIonic Liquid Polymeric Membrane: Synthesis, Characterization & Performance EvaluationInvestigation on Impact Resistance Foamed Concrete Reinforced by Polypropylene FibreCharacterization of Different Additives of Sintered Cobalt F-75 Alloy in Biomaterial ApplicationsThe Behaviours of Steel Fiber as Main Reinfocement in High Performance Slurry Infiltrated Fiber Reinforced ConcretePhysical Characteristic of Zn Doped Soft Ferrites MxZn1-x Fe2O4Preparation and Characterization of Activated Carbon Made from Oil Palm Empty Fruit BunchThe Effect of Hydrochloric Acid on the Surface Area, Morphology and Physico-Chemical Properties of Sayong Kaolinite ClayEffect of Filler Size on Flexural Properties of Calcium Carbonate Derived from Clam Shell Filled with Unsaturated Polyester CompositesEffect of Catalyst Calcination Temperature on the Synthesis of MWCNTs-Talc Hybrid Compound Using CVD MethodThe Effect of Lemongrass as Lost Circulation Material (LCM) to the Filtrate and Filter Cake FormationSynthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting ApplicationCompressive Strength of Fly Ash Based Geopolymer/Glass Fiber Composite via Filament WindingMicrostructure Study on Volcano Ash Geopolymer Aggregate at Different Sintering TemperatureThe Need to Intensify Research Efforts in the Alternative to Lead ShotContribution of RHA Granules as Filler to Improve the Impact Resistance of Foamed ConcreteThe Effect of Inoculation on Properties of Modified Ductile Ni-Resist AlloyEffect of Annealing Atmosphere on the Morphology of Copper Oxide Thin Films Deposited on TiO2 Substrates Prepared by Sol-Gel ProcessSynthesis and Characterization of Iron Produced from Iron Mill ScaleA Study of Liberation and Separation Process of Metals from Printed Circuit Boards (PCBs) ScrapsEffect of Pyrolysis Temperature on the Synthesis of Carbon Fiber from Natural Organic WasteOn the Fatigue of Shape Memory AlloysOn the Structure of Shape Memory AlloysEffect of Fly Ash/Alkaline Activator Ratio and Sodium Silicate/NaOH Ratio on Fly Ash Geopolymer Coating StrengthCompressive Strength and Morphology of Fly Ash Based Geopolymer as Artificial Aggregate with Different Curing TemperatureDesign and Development of Remote Communication System for Mines Detector RobotCarbon Dioxide Separation Using Amine Modified Zeolite in Pressure Swing Adsorption SystemEco-Friendly Synthesis of Nanozeolite NaA from Rice Husk Ash and its Efficiency in Removing Ammonium IonsOn the Bioremediation Potential of Inhabitant Microbes of Dredged Marine Soils: A Theoretical FrameworkPhysicochemical Properties of Pyrolitic Carbon Black from Waste TyresEffect of Thickness for Sound Absorption of High Density Biopolymer FoamsHalal Based Sourced EM for Turbidity Reducing in Wastewater TreatmentGrowth Kinetic of Fresh and Frezee-Dried Pleurotus sajor-caju (Oyster Mushroom) Mycelium for Preservation StudyEffect of Beta Tricalcium Phosphate (?-TCP) on Properties of Mg-Zn CompositesPotential of Five-Leaved Chaste Tree (Vitex negundo L.) Leaves as Source of Natural Dye from Supercritical Carbon Dioxide (SC-CO2) ExtractionSurface Engineered Poly(lactic acid) (PLA) Microspheres by Chemical Treatment for Drug Delivery SystemNon-Linear Kinetic and Isotherm Modeling on the Adsorption of Lead (II) Ions from Aqueous Solution onto Monosodium Glutamate Functionalised Rubber Leaf PowderPerformance Evaluation of Okra (Abelmoschus esculentus) as Coagulant for Turbidity Removal in Water TreatmentPotential Use of Biofibers for Functional Immobilization of Lactobacillus rhamnosus NRRL 442Effect of Oil Palm Empty Fruit Bunch-Grafted-Poly(Acrylic Acid-co-Acrylamide) Hydrogel Preparations on Plant Growth PerformanceNovel Low-Cost Activated Carbon from Coconut Shell and its Adsorptive Characteristics for Carbon DioxideThe Effect of Copigmentation on the Stability of Butterfly Pea AnthocyaninsPreparation and Characterization of Co-HA Powder Using Modified Electroless MethodSintering Effects on Mechanical Properties of Co-Ha Composite Prepared by Modified Electroless DepositionPreparation of Biodegradable Poly(lactic Acid) Electrospun Membrane with Decreased Pore Size by Post Heat TreatmentAdsorption Behavior of Methylene Blue on Ethylenediaminetetraacetic Dianhydride Modified Neem (Azadirachta indica) Leaf PowderAnodic Oxidation of Titanium in Mixture of ?-Glycerophosphate (?-GP) and Calcium Acetate (CA)Ultrafiltration Formulation of Cellulose Acetate / Polysulfone Blended MembraneExtraction of Phenol and Acetic Acid from Synthetic Bio-Oil by Ammonium Sulfate SolutionSound Absorption of Laminated Biopolymer Foam and Epoxy FoamThe Potential of Garlic Extract as Bio-Inhibitor in Urea FertilizerSolubility of Phoenix dactylifera Seed Oil in Supercritical Carbon Dioxide (Sc-Co2) Using Empirical ModelDevelopment of Dense Hydroxyapatite-Ni by Modified Electroless Deposition TechniqueEffect of Different Nickel Content on the Mechanical Properties of Hydroxyapatite-Ni Composites from Coated PowdersMonitoring Initial Glucose Concentration for Optimum pH Control during Fermentation of Microbial Cellulose in Rotary Discs ReactorReview on Malaysian and Thailand's Perspective towards Renewable EnergyExtraction of Silica from Palm Ash Using Organic Acid Leaching TreatmentMaterials Research in Appropriate Technology: In the Midst of Science, Engineering, and TechnologyDesign and Optimization of a Monomer Processing ReactorLandfill Leachate Treatment Using SSF-FWS Constructed Wetland Planted with Limnocharis flava and Eihhornia crassipes under Different Hydraulic Loading RateMethylene Blue Dye Adsorption to Durian Shell Activated CarbonOil Blends as Biolubricant: Screening of Effect Factors Influence to BasestockHigh Yield Synthesis of Kojic Ester Using Dual Enzymes System and their Antibacterial ActivityProtein Produced by Bacillus subtilis ATCC21332 in the Presence of Cymbopogon flexuosus Essential OilFabrication and Characterization of Multiwalled Carbon Nanotubes-Alumina Hybrid Compound: Comparison of Various Supported CatalystThe Effect of Cement Replacement Materials to the Hydration of Petroleum Sludge in OPCLoad versus Displacement Validation between Ruaumoko Hysteresis Program and Experimental Work on CFRP Retrofitted Precast Beam-Column Exterior JointPotential of RHA in Foamed Concrete Subjected to Dynamic Impact LoadingFeasibility Study on Composition and Mechanical Properties of Marine Clay Based Geopolymer BrickNew Processing Method of Kaolin-Based Geopolymer Brick by Using Geopolymer Brick MachineEffect of Parawood Ash on Drying Shrinkage, Compressive Strength and Microstructural Characterization of Metakaolin-Based Geopolymer MortarExperimental Investigation of Flax FRP Tube Confined Coconut Fibre Reinforced ConcreteExperimental Evaluation of Profiled Steel Sheet Dry Board Wall Panel SystemFire Resistance Evaluation of Lightweight Geopolymer Concrete System Exposed to Elevated Temperatures of 100-800 ?CA Review on Ductile Self-Compacting ConcreteExperimental Analysis of Interlocking Load Bearing Wall Brickool SystemInfluence of Casting Direction on Fracture Energy of Fiber-Reinforced Cement CompositesStructural System of Safe House against Tornado and EarthquakesThe Utilization of Aluminum Waste as Sand Replacement in ConcreteGreen Lightweight Concrete Made from Natural Para Rubber ProductAn Overview of Fly Ash and Bottom Ash Replacement in Self-Compaction ConcreteEffect of Coconut Fibers Addition to early Age Unfired Soil Lime Bricks StrengthThe Application of Brick Wall and Bamboo Reinforced Concrete Frame for Redevelopment of Traditional Houses in Pengotan VillageProperties of Lightweight Concrete Composites with Mixture of Fly Ash and Concrete Sludge AggregatePotential Use of Cameron Highlands Reservoir Sediment in Compressed BricksPerformance of Simplified Damage Assessment Tools for Reinforced Concrete Panels under Blast LoadingStructural Lightweight Aggregate Concrete Containing High Volume Waste MaterialsNew Lightweight Construction Material: Cellular Mat Using Recycled PlasticChallenges of Gathering User Requirement in eXtreme Programming Project: A Case Study of Highway Construction Monitoring SystemImmediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface MethodologyStrength - Ultrasonic Pulse Velocity Relationship of Thermally Activated Alum Sludge Multiple Blended High Performance ConcretesCompressive Strength and Density of Cementless Unfired Lightweight Brick Utilizing Coal Ash from Coal-Fired Thermal Power PlantInvestigation of Workpiece Positioning Methods for Machining Oil-Pocket on Hip-Implant Spherical SurfaceStudy on Properties and Morphology of Kaolin Based Geopolymer Coating on Clay SubstratesEffect of Surface Roughness of Pure Aluminium A1100 on the Cold Work Extrusion by Using Different Angles of Taper DieChemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron SputteringModeling of TiN Coating Thickness Using RSM ApproachDifferent Concentration of Al(NO3)3 in ZrO2/Al2O3 Double Layer Coating Steel Prepared by Electrolytic MethodDynamic Contact Angle of Modified Biopolymer Droplet on Urea Surface: Temperature EffectsCharacteristic and Corrosion Studies of Rare Earth (REE) Based Anodizing on AZ91D Magnesium AlloyEffect on Strength and Hardness of Clay Ceramic Substrate after Treatment Using Koalin Based Geopolymer GlazeProtective CuO Coating Synthesis via Electrodeposition of Copper on AISI 430 Ferritic Steel for SOFC Interconnect ApplicationsSurface Morphology and Corrosion Behavior of Electrolytic Coatings in Different Aqueous SolutionsWarpage Analysis with Straight Drilled and Conformal Cooling Channels on Front Panel Housing by Using Taguchi MethodInvestigation on the Effect of TiO2 Nanofiller to the Structural and Conductivity Characteristics of Poly(vinylidene fluoride-co-hexafluoropropylene)/Poly(ethyl methacrylate) Based Polymer Electrolytes SystemStructural and Electrical Characterization of Hexanoyl Chitosan-LiClO4-TiO2-DMC Polymer ElectrolytesEffects of Trans-Polyoctylene Rubber in Polypropylene/Recycled Acrylonitrile Butadiene/Rice Husk Powder CompositesEffect of Empty Fruit Bunch (EFB) Fiber on Mechanical Properties of HDPE/EVA/MMT/EFB Nanohybrid BiocompositeGeneral Lifetime Damage Model for Glass Fibre Reinforced Epoxy (GRE) Composite Pipes under Multiaxial LoadingProperties of Fresh and Hardened Glass Fiber Reinforced Fly Ash Based Geopolymer ConcreteNatural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Ternary Blend: Curing Characteristics and Swelling TestModification of Pin on Disc Test to Measure Railway Brake Block Friction CoefficientKenaf Bast-Unsaturated Polyester Composite: The Effect of Different Alkaline Treatment Condition on Tensile PropertiesThe Effect of Chloride Environment on Mechanical Properties Geopolymer Binder with Fly AshHexanoyl Chitosan-Polystyrene Blend Based Composite Polymer Electrolyte with Surface Treated TiO2 FillersEffects of Drilling Generated Heat on Damage Factor in GFRPLow and High Temperature Isothermal Aging Effect on Morphology and Diffusion Kinetics of Intermetallic Compound (IMC) for Sn-Cu-Si3N4 Composite SolderPolyolefin Layered Silicates Nanocomposites ? A ReviewWarpage Analysis between Straight and Conformal Cooling Channels on Thin Shallow ShellEffect of Carbon Nanotubes on the Compression Test and Energy Absorption of Aluminium/Polyurethane-Carbon Nanotubes Foam SandwichEffect of Chemical Treatment on the Mechanical Properties of Pultruded Kenaf Fibre Reinforced Polyester CompositesIonic Conductivity, Morphology and Transference Number of Sodium Ion in PMMA Based Gel Polymer ElectrolytesThe Outcome of Sintering Parameters Study toward the Thermal Properties of CuSiC CompositeAxial Crushes on Composite Laminated Square Tubes under Compressive LoadingCrush Force Efficiency of Composite Square Profile under Off-Axis LoadingTensile and Morphological Properties of Low Density Polyethylene/Spear Grass CompositesEffect of Alkali Treatment on Crystalline Structure of Cellulose Fiber from Mendong (Fimbristylis globulosa) StrawProperties of Natural Rubber/Ethylene Propylene Diene Monomer/Recycled Latex Catheter (NR/EPDM/rLC) Ternary Blends: Cure Characteristics and HardnessStructure and Properties of SiC Coated R6M5 High-Speed SteelThe Influence of Cure Characteristics and Crosslink Density of Virgin Acrylonitrile Butadiene Rubber/Recycled Acrylonitrile Butadiene Rubber (vNBR/rNBR) BlendsProduction of Silicon Carbide via Grinding and Heat Treatment ProcessRubber Toughened Polyamide 6/High Density Polyethylene/HDPE-g-MAH Nanocomposites with Ethylene Vinyl AcetateInfluence of Multilayer Textile Biopolymer Foam Doped with Titanium Dioxide for Sound Absorption MaterialsInfluence of High Doping of TiO2 of Polymeric Foam for Acoustic StudyUtilization of Treated Red Meranti Wood Dust as Polymer Foam Composite for Acoustic StudyMixing Optimization of Sn-Cu-Si3N4 via Powder Metallurgy Route for Composite Solder FabricationEffect Maleic Anhydride Polypropylene on Properties of Calcium Carbonate Filled Polypropylene/Ethylene Propylene Diene Terpolymer CompositesTensile and Morphology Properties of Polylactic Acid/Treated Typha latifolia CompositesEffect of Organic Space Holder in Fabrication of Cloced-Cell Aluminium FoamStudies on Sodium Ion Conducting Gel Polymer ElectrolytesRemoval of Nickel Ions from Aqueous Solution by Polypyrrole Conducting PolymerLignin Loading Effect on Biodegradability and Nitrogen Release Properties of Urea Modified Tapioca Starch in Wet SoilThe Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Tensile Properties and MorphologyThe Influence of CB, Silica and CaCO3 on Tensile and Morphological Properties of vPE/rPE/EPDM BlendsStrain Distribution on Reinforcement of Concrete Beams Reinforced with Glass Fiber Reinforced Polymer (GFRP) BarsConductivity and Dielectric Studies of Methylcellulose/Chitosan-NH4CF3SO3 Polymer ElectrolyteThe Effect of Methylene Diphenyl Diisocyanate on the Nonisothermal Properties of Polylactic Acid/Elaeis guineensis Fibres BiocompositesEffect of Different Tex Number and Surfacing Veil Application on the Pultruded Kenaf Reinforced Composites (PKRC) under Natural Weathering ExposureComparison Study in Consolidation of Yttria Reinforced Iron-Chromium Composites Using Conventional and Microwave Sintering TechniqueProperties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride PolypropyleneComparison between Single and Multi Gates for Minimization of Warpage Using Taguchi Method in Injection Molding Process for ABS MaterialCu-SiCp Composites as Advanced Electronic Packaging MaterialsThermal Expansion Behavior of the Electroless Copper Coated Cu-SiCp Composites Fabricated via the Conventional Powder Metallurgical TechniquePhysical and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends - The Effects of TOR as a CompatibilizerThe Effects of Carbon Black and Calcium Carbonate as a Filler on Cure Characteristic and Physical Properties of SBR/CRr BlendsHigh Sensitivity Humidity Sensor Based on ZnSnO3 Composite NanocubePreparation of Polyethersulfone Ultrafiltration Membrane Surface Coated with TiO2 Nanoparticles and Irradiated under UV LightEffect of Volume Plasticizers on the Thermal Performance of Tacca leontopetaloides Starch BiopolymerFilling Missing Data Using Interpolation Methods: Study on the Effect of Fitting DistributionEvaluation Grain Homogeneity of Aluminium after ECAP Process by ECAP Geometry Analysis Using Taguchi MethodMean Imputation Techniques for Filling the Missing Observations in Air Pollution DatasetCompressive Behavior of AA6061 at Room Temperature and Validation of the FE Model Based on Optical 3D Measurement TechniquePhotovoltaic Powered Uninterruptible Power Supply Using Microcontroller PIC16F628-I/PDesign and Development of Tracking System for Mines Detector RobotDesign and Development of Sensing System for Mines Detector RobotNumerical Stress Analysis of Epoxy Adhesively Bonded Dissimilar JointExperimental Validation on Time Base Analysis of Various Aircraft CFRP Panel Conditions for Structural Health MonitoringEstimation of Bioethanol Production from Jatropha curcas Using Neural NetworkCarbon Powder as Additive in Near-Net-Shaping of Mechanical Components through Warm Forming RouteThermophysical Properties of Ionic Liquid with Thiocyanate and Dicynamide AnionsThe Fabrication of Codoped ZnO Thin Films by DC Magnetron SputteringTwo-Step Sintering of Fine Barium Cerate-Zirconate Ceramics ElectrolyteNewly Developed Starch-Based Hydroxyethyl Cellulose Film with Wide Spectrum of pH-Colour IndicatorA Robust Approach for Detecting QRS Complexes of Electrocardiogram Signal with Different MorphologiesInfluence of Additive on the Performance of Energy Conversion Solar CellStudy on Physical and Chemical Properties of Fly Ash from Different Area in MalaysiaFeasibility Study of Waste Motor Recycling through Manual Dismantling and Hydrometallurgical ProcessShort Term and Long Term Aging Effects of Asphalt Binder Modified with MontmorilloniteSol-Gel Synthesis of Novel Silica Hybrid Xerogels: Porous StudiesSol-Gel Synthesis and Preliminary Characterizations of Novel Silica Hybrid XerogelsRadiation Shielding Characteristics of Concretes Incorporates Different Waste MaterialsSeismic Performance of Insulated Sandwich Wall Panel Subjected to Lateral Cyclic LoadingEnhance the Performance of Free Space Optical (FSO) Communication due to Atmospheric Turbulence via the Dual Diffuser Modulation (DDM)A Tomography System Based on Optical and Electrodynamic SensorsComparison of Single Mode Fiber and Multimode Fiber in Deployment of SCM-OCDMA in Local Area NetworkIncreasing Capacity and Suppress the Crosstalk by Using Hybrid Optical OFDM/WDM SystemEffective Design for Fiber-to-the-Home Access Network Using Flexible Cross Correlation (FCC) CodeRealization of Wavelength-Time Modified Double Weight Codes Optical Code Division Multiple Access SystemChannel Spacing Effect on SAC-OCDMA System Based Modified-AND Subtraction Detection SchemeDefects Generation in Ge/GeO2 StructureAnalysis of Wetting of Perylene Diimide Thin Films-on-Glass by WaterData-Driven Subspace Predictive Control for a MIMO SystemCharacterization of ProTEX? PSB Thin Film as a Photosensitive Layer for MEMS Capacitive Pressure Sensor Diaphragm Based on SiC-on-Si WaferDrop Weight Impact Analysis of Laminated Polyurethane Foam/Cloisite 30B ClayLeachability of Metal Ions in TCLP Leachate of Solidified Petroleum SludgeDetermination of Non-Linear Material Constants of RTV Silicone Applied to a Soft Actuator for Robotic ApplicationsFatigue Crack Initiation and Growth of Aluminum Alloy with Stress Ratio EffectsA Study on Relationship between Porosity and Compressive Strength for Geopolymer PasteWear-Resistance of Nitrided W-Mo-High Speed Steel in Abrasive Wear ConditionsPerformance of Thermoelectric Cooling System: Effect of Aluminium Heat Sink and Heat DissipationEffects of Knife Shapes and Cutting Speeds of a Mower on the Power Consumption for Pulverizing Sweet Potato VineThe Effect of Solution Temperature on Electrodeposit-ZnO Thin FilmEffect Different Limb of Transformer Core Assemble on Performance