Advanced Materials Engineering and Technology II
Published on 20. March 2014
Book
Paperback/Softback
1194 pages
978-3-03785-937-7 (ISBN)
Description
Collection of selected, peer reviewed papers from the 2013 International Conference on Advanced Materials Engineering and Technology (ICAMET 2013), November 28-29, 2013, Bandung, Indonesia.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 205 papers are grouped as follows:
Chapter 1: Advanced Characterization;
Chapter 2: Biomaterials;
Chapter 3: Biotechnology and Life Sciences;
Chapter 4: Building Materials;
Chapter 5: Coatings and Surface Engineering;
Chapter 6: Composites and Polymer Materials;
Chapter 7: Computational Materials Science;
Chapter 8: New Functional Materials;
Chapter 9: Optical and Photonic Materials;
Chapter 10: Optoelectronics;
Chapter 11: Semi-Conductor and Micro-Electronic Materials;
Chapter 12: Testing and Evaluation of Materials
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 205 papers are grouped as follows:
Chapter 1: Advanced Characterization;
Chapter 2: Biomaterials;
Chapter 3: Biotechnology and Life Sciences;
Chapter 4: Building Materials;
Chapter 5: Coatings and Surface Engineering;
Chapter 6: Composites and Polymer Materials;
Chapter 7: Computational Materials Science;
Chapter 8: New Functional Materials;
Chapter 9: Optical and Photonic Materials;
Chapter 10: Optoelectronics;
Chapter 11: Semi-Conductor and Micro-Electronic Materials;
Chapter 12: Testing and Evaluation of Materials
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 60 mm
Weight
2150 gr
ISBN-13
978-3-03785-937-7 (9783037859377)
DOI
10.4028/b-T6ImyQ
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Mohd Mustafa Al Bakri Abdullah | Liyana Jamaludin | Alida Abdullah
Advanced Materials Engineering and Technology II
Software
03/2014
Trans Tech Publications Ltd
€488.77
Shipment within 10-15 days
Mohd Mustafa Al Bakri Abdullah | Liyana Jamaludin | Alida Abdullah
Advanced Materials Engineering and Technology II
E-Book
12/2013
Trans Tech Publications Ltd
€211.86
Available for download
Content
Preface, Conference Organization and Reviewer List
Chapter 1: Advanced Characterization
Application of InN Based Quantum Dot in Reducing Short Circuit Current Variation of Solar Cell above Room Temperature
Influence of Dolomite on the Mechanical Properties of Boiler Ash Geopolymer Paste
Effect of Varying Mixed Refrigerant Composition on Main Cryogenic Heat Exchanger Performance
Ionic Liquid Polymeric Membrane: Synthesis, Characterization & Performance Evaluation
Investigation on Impact Resistance Foamed Concrete Reinforced by Polypropylene Fibre
Characterization of Different Additives of Sintered Cobalt F-75 Alloy in Biomaterial Applications
The Behaviours of Steel Fiber as Main Reinfocement in High Performance Slurry Infiltrated Fiber Reinforced Concrete
Physical Characteristic of Zn Doped Soft Ferrites MxZn1-x Fe2O4
Preparation and Characterization of Activated Carbon Made from Oil Palm Empty Fruit Bunch
The Effect of Hydrochloric Acid on the Surface Area, Morphology and Physico-Chemical Properties of Sayong Kaolinite Clay
Effect of Filler Size on Flexural Properties of Calcium Carbonate Derived from Clam Shell Filled with Unsaturated Polyester Composites
Effect of Catalyst Calcination Temperature on the Synthesis of MWCNTs-Talc Hybrid Compound Using CVD Method
The Effect of Lemongrass as Lost Circulation Material (LCM) to the Filtrate and Filter Cake Formation
Synthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting Application
Compressive Strength of Fly Ash Based Geopolymer/Glass Fiber Composite via Filament Winding
Microstructure Study on Volcano Ash Geopolymer Aggregate at Different Sintering Temperature
The Need to Intensify Research Efforts in the Alternative to Lead Shot
Contribution of RHA Granules as Filler to Improve the Impact Resistance of Foamed Concrete
The Effect of Inoculation on Properties of Modified Ductile Ni-Resist Alloy
Effect of Annealing Atmosphere on the Morphology of Copper Oxide Thin Films Deposited on TiO2 Substrates Prepared by Sol-Gel Process
Synthesis and Characterization of Iron Produced from Iron Mill Scale
A Study of Liberation and Separation Process of Metals from Printed Circuit Boards (PCBs) Scraps
Effect of Pyrolysis Temperature on the Synthesis of Carbon Fiber from Natural Organic Waste
On the Fatigue of Shape Memory Alloys
On the Structure of Shape Memory Alloys
Effect of Fly Ash/Alkaline Activator Ratio and Sodium Silicate/NaOH Ratio on Fly Ash Geopolymer Coating Strength
Compressive Strength and Morphology of Fly Ash Based Geopolymer as Artificial Aggregate with Different Curing Temperature
Design and Development of Remote Communication System for Mines Detector Robot
Carbon Dioxide Separation Using Amine Modified Zeolite in Pressure Swing Adsorption System
Eco-Friendly Synthesis of Nanozeolite NaA from Rice Husk Ash and its Efficiency in Removing Ammonium Ions
On the Bioremediation Potential of Inhabitant Microbes of Dredged Marine Soils: A Theoretical Framework
Physicochemical Properties of Pyrolitic Carbon Black from Waste Tyres
Effect of Thickness for Sound Absorption of High Density Biopolymer Foams
Chapter 2: Biomaterials
Halal Based Sourced EM for Turbidity Reducing in Wastewater Treatment
Growth Kinetic of Fresh and Frezee-Dried Pleurotus sajor-caju (Oyster Mushroom) Mycelium for Preservation Study
Effect of Beta Tricalcium Phosphate (?-TCP) on Properties of Mg-Zn Composites
Potential of Five-Leaved Chaste Tree (Vitex negundo L.) Leaves as Source of Natural Dye from Supercritical Carbon Dioxide (SC-CO2) Extraction
Surface Engineered Poly(lactic acid) (PLA) Microspheres by Chemical Treatment for Drug Delivery System
Non-Linear Kinetic and Isotherm Modeling on the Adsorption of Lead (II) Ions from Aqueous Solution onto Monosodium Glutamate Functionalised Rubber Leaf Powder
Performance Evaluation of Okra (Abelmoschus esculentus) as Coagulant for Turbidity Removal in Water Treatment
Potential Use of Biofibers for Functional Immobilization of Lactobacillus rhamnosus NRRL 442
Effect of Oil Palm Empty Fruit Bunch-Grafted-Poly(Acrylic Acid-co-Acrylamide) Hydrogel Preparations on Plant Growth Performance
Novel Low-Cost Activated Carbon from Coconut Shell and its Adsorptive Characteristics for Carbon Dioxide
The Effect of Copigmentation on the Stability of Butterfly Pea Anthocyanins
Preparation and Characterization of Co-HA Powder Using Modified Electroless Method
Sintering Effects on Mechanical Properties of Co-Ha Composite Prepared by Modified Electroless Deposition
Preparation of Biodegradable Poly(lactic Acid) Electrospun Membrane with Decreased Pore Size by Post Heat Treatment
Adsorption Behavior of Methylene Blue on Ethylenediaminetetraacetic Dianhydride Modified Neem (Azadirachta indica) Leaf Powder
Anodic Oxidation of Titanium in Mixture of ?-Glycerophosphate (?-GP) and Calcium Acetate (CA)
Ultrafiltration Formulation of Cellulose Acetate / Polysulfone Blended Membrane
Extraction of Phenol and Acetic Acid from Synthetic Bio-Oil by Ammonium Sulfate Solution
Sound Absorption of Laminated Biopolymer Foam and Epoxy Foam
The Potential of Garlic Extract as Bio-Inhibitor in Urea Fertilizer
Solubility of Phoenix dactylifera Seed Oil in Supercritical Carbon Dioxide (Sc-Co2) Using Empirical Model
Development of Dense Hydroxyapatite-Ni by Modified Electroless Deposition Technique
Effect of Different Nickel Content on the Mechanical Properties of Hydroxyapatite-Ni Composites from Coated Powders
Chapter 3: Biotechnology and Life Sciences
Monitoring Initial Glucose Concentration for Optimum pH Control during Fermentation of Microbial Cellulose in Rotary Discs Reactor
Review on Malaysian and Thailand's Perspective towards Renewable Energy
Extraction of Silica from Palm Ash Using Organic Acid Leaching Treatment
Materials Research in Appropriate Technology: In the Midst of Science, Engineering, and Technology
Design and Optimization of a Monomer Processing Reactor
Landfill Leachate Treatment Using SSF-FWS Constructed Wetland Planted with Limnocharis flava and Eihhornia crassipes under Different Hydraulic Loading Rate
Methylene Blue Dye Adsorption to Durian Shell Activated Carbon
Oil Blends as Biolubricant: Screening of Effect Factors Influence to Basestock
High Yield Synthesis of Kojic Ester Using Dual Enzymes System and their Antibacterial Activity
Protein Produced by Bacillus subtilis ATCC21332 in the Presence of Cymbopogon flexuosus Essential Oil
Fabrication and Characterization of Multiwalled Carbon Nanotubes-Alumina Hybrid Compound: Comparison of Various Supported Catalyst
Chapter 4: Building Materials
The Effect of Cement Replacement Materials to the Hydration of Petroleum Sludge in OPC
Load versus Displacement Validation between Ruaumoko Hysteresis Program and Experimental Work on CFRP Retrofitted Precast Beam-Column Exterior Joint
Potential of RHA in Foamed Concrete Subjected to Dynamic Impact Loading
Feasibility Study on Composition and Mechanical Properties of Marine Clay Based Geopolymer Brick
New Processing Method of Kaolin-Based Geopolymer Brick by Using Geopolymer Brick Machine
Effect of Parawood Ash on Drying Shrinkage, Compressive Strength and Microstructural Characterization of Metakaolin-Based Geopolymer Mortar
Experimental Investigation of Flax FRP Tube Confined Coconut Fibre Reinforced Concrete
Experimental Evaluation of Profiled Steel Sheet Dry Board Wall Panel System
Fire Resistance Evaluation of Lightweight Geopolymer Concrete System Exposed to Elevated Temperatures of 100-800 degreesC
A Review on Ductile Self-Compacting Concrete
Experimental Analysis of Interlocking Load Bearing Wall Brickool System
Influence of Casting Direction on Fracture Energy of Fiber-Reinforced Cement Composites
Structural System of Safe House against Tornado and Earthquakes
The Utilization of Aluminum Waste as Sand Replacement in Concrete
Green Lightweight Concrete Made from Natural Para Rubber Product
An Overview of Fly Ash and Bottom Ash Replacement in Self-Compaction Concrete
Effect of Coconut Fibers Addition to early Age Unfired Soil Lime Bricks Strength
The Application of Brick Wall and Bamboo Reinforced Concrete Frame for Redevelopment of Traditional Houses in Pengotan Village
Properties of Lightweight Concrete Composites with Mixture of Fly Ash and Concrete Sludge Aggregate
Potential Use of Cameron Highlands Reservoir Sediment in Compressed Bricks
Performance of Simplified Damage Assessment Tools for Reinforced Concrete Panels under Blast Loading
Structural Lightweight Aggregate Concrete Containing High Volume Waste Materials
New Lightweight Construction Material: Cellular Mat Using Recycled Plastic
Challenges of Gathering User Requirement in eXtreme Programming Project: A Case Study of Highway Construction Monitoring System
Immediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface Methodology
Strength - Ultrasonic Pulse Velocity Relationship of Thermally Activated Alum Sludge Multiple Blended High Performance Concretes
Compressive Strength and Density of Cementless Unfired Lightweight Brick Utilizing Coal Ash from Coal-Fired Thermal Power Plant
Chapter 5: Coatings and Surface Engineering
Investigation of Workpiece Positioning Methods for Machining Oil-Pocket on Hip-Implant Spherical Surface
Study on Properties and Morphology of Kaolin Based Geopolymer Coating on Clay Substrates
Effect of Surface Roughness of Pure Aluminium A1100 on the Cold Work Extrusion by Using Different Angles of Taper Die
Chemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron Sputtering
Modeling of TiN Coating Thickness Using RSM Approach
Different Concentration of Al(NO3)3 in ZrO2/Al2O3 Double Layer Coating Steel Prepared by Electrolytic Method
Dynamic Contact Angle of Modified Biopolymer Droplet on Urea Surface: Temperature Effects
Characteristic and Corrosion Studies of Rare Earth (REE) Based Anodizing on AZ91D Magnesium Alloy
Effect on Strength and Hardness of Clay Ceramic Substrate after Treatment Using Koalin Based Geopolymer Glaze
Protective CuO Coating Synthesis via Electrodeposition of Copper on AISI 430 Ferritic Steel for SOFC Interconnect Applications
Surface Morphology and Corrosion Behavior of Electrolytic Coatings in Different Aqueous Solutions
Chapter 6: Composites and Polymer Materials
Warpage Analysis with Straight Drilled and Conformal Cooling Channels on Front Panel Housing by Using Taguchi Method
Investigation on the Effect of TiO2 Nanofiller to the Structural and Conductivity Characteristics of Poly(vinylidene fluoride-co-hexafluoropropylene)/Poly(ethyl methacrylate) Based Polymer Electrolytes System
Structural and Electrical Characterization of Hexanoyl Chitosan-LiClO4-TiO2-DMC Polymer Electrolytes
Effects of Trans-Polyoctylene Rubber in Polypropylene/Recycled Acrylonitrile Butadiene/Rice Husk Powder Composites
Effect of Empty Fruit Bunch (EFB) Fiber on Mechanical Properties of HDPE/EVA/MMT/EFB Nanohybrid Biocomposite
General Lifetime Damage Model for Glass Fibre Reinforced Epoxy (GRE) Composite Pipes under Multiaxial Loading
Properties of Fresh and Hardened Glass Fiber Reinforced Fly Ash Based Geopolymer Concrete
Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Ternary Blend: Curing Characteristics and Swelling Test
Modification of Pin on Disc Test to Measure Railway Brake Block Friction Coefficient
Kenaf Bast-Unsaturated Polyester Composite: The Effect of Different Alkaline Treatment Condition on Tensile Properties
The Effect of Chloride Environment on Mechanical Properties Geopolymer Binder with Fly Ash
Hexanoyl Chitosan-Polystyrene Blend Based Composite Polymer Electrolyte with Surface Treated TiO2 Fillers
Effects of Drilling Generated Heat on Damage Factor in GFRP
Low and High Temperature Isothermal Aging Effect on Morphology and Diffusion Kinetics of Intermetallic Compound (IMC) for Sn-Cu-Si3N4 Composite Solder
Polyolefin Layered Silicates Nanocomposites - A Review
Warpage Analysis between Straight and Conformal Cooling Channels on Thin Shallow Shell
Effect of Carbon Nanotubes on the Compression Test and Energy Absorption of Aluminium/Polyurethane-Carbon Nanotubes Foam Sandwich
Effect of Chemical Treatment on the Mechanical Properties of Pultruded Kenaf Fibre Reinforced Polyester Composites
Ionic Conductivity, Morphology and Transference Number of Sodium Ion in PMMA Based Gel Polymer Electrolytes
The Outcome of Sintering Parameters Study toward the Thermal Properties of CuSiC Composite
Axial Crushes on Composite Laminated Square Tubes under Compressive Loading
Crush Force Efficiency of Composite Square Profile under Off-Axis Loading
Tensile and Morphological Properties of Low Density Polyethylene/Spear Grass Composites
Effect of Alkali Treatment on Crystalline Structure of Cellulose Fiber from Mendong (Fimbristylis globulosa) Straw
Properties of Natural Rubber/Ethylene Propylene Diene Monomer/Recycled Latex Catheter (NR/EPDM/rLC) Ternary Blends: Cure Characteristics and Hardness
Structure and Properties of SiC Coated R6M5 High-Speed Steel
The Influence of Cure Characteristics and Crosslink Density of Virgin Acrylonitrile Butadiene Rubber/Recycled Acrylonitrile Butadiene Rubber (vNBR/rNBR) Blends
Production of Silicon Carbide via Grinding and Heat Treatment Process
Rubber Toughened Polyamide 6/High Density Polyethylene/HDPE-g-MAH Nanocomposites with Ethylene Vinyl Acetate
Influence of Multilayer Textile Biopolymer Foam Doped with Titanium Dioxide for Sound Absorption Materials
Influence of High Doping of TiO2 of Polymeric Foam for Acoustic Study
Utilization of Treated Red Meranti Wood Dust as Polymer Foam Composite for Acoustic Study
Mixing Optimization of Sn-Cu-Si3N4 via Powder Metallurgy Route for Composite Solder Fabrication
Effect Maleic Anhydride Polypropylene on Properties of Calcium Carbonate Filled Polypropylene/Ethylene Propylene Diene Terpolymer Composites
Tensile and Morphology Properties of Polylactic Acid/Treated Typha latifolia Composites
Effect of Organic Space Holder in Fabrication of Cloced-Cell Aluminium Foam
Studies on Sodium Ion Conducting Gel Polymer Electrolytes
Removal of Nickel Ions from Aqueous Solution by Polypyrrole Conducting Polymer
Lignin Loading Effect on Biodegradability and Nitrogen Release Properties of Urea Modified Tapioca Starch in Wet Soil
The Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Tensile Properties and Morphology
The Influence of CB, Silica and CaCO3 on Tensile and Morphological Properties of vPE/rPE/EPDM Blends
Strain Distribution on Reinforcement of Concrete Beams Reinforced with Glass Fiber Reinforced Polymer (GFRP) Bars
Conductivity and Dielectric Studies of Methylcellulose/Chitosan-NH4CF3SO3 Polymer Electrolyte
The Effect of Methylene Diphenyl Diisocyanate on the Nonisothermal Properties of Polylactic Acid/Elaeis guineensis Fibres Biocomposites
Effect of Different Tex Number and Surfacing Veil Application on the Pultruded Kenaf Reinforced Composites (PKRC) under Natural Weathering Exposure
Comparison Study in Consolidation of Yttria Reinforced Iron-Chromium Composites Using Conventional and Microwave Sintering Technique
Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene
Comparison between Single and Multi Gates for Minimization of Warpage Using Taguchi Method in Injection Molding Process for ABS Material
Cu-SiCp Composites as Advanced Electronic Packaging Materials
Thermal Expansion Behavior of the Electroless Copper Coated Cu-SiCp Composites Fabricated via the Conventional Powder Metallurgical Technique
Physical and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends - The Effects of TOR as a Compatibilizer
The Effects of Carbon Black and Calcium Carbonate as a Filler on Cure Characteristic and Physical Properties of SBR/CRr Blends
High Sensitivity Humidity Sensor Based on ZnSnO3 Composite Nanocube
Preparation of Polyethersulfone Ultrafiltration Membrane Surface Coated with TiO2 Nanoparticles and Irradiated under UV Light
Effect of Volume Plasticizers on the Thermal Performance of Tacca leontopetaloides Starch Biopolymer
Chapter 7: Computational Materials Science
Filling Missing Data Using Interpolation Methods: Study on the Effect of Fitting Distribution
Evaluation Grain Homogeneity of Aluminium after ECAP Process by ECAP Geometry Analysis Using Taguchi Method
Mean Imputation Techniques for Filling the Missing Observations in Air Pollution Dataset
Compressive Behavior of AA6061 at Room Temperature and Validation of the FE Model Based on Optical 3D Measurement Technique
Photovoltaic Powered Uninterruptible Power Supply Using Microcontroller PIC16F628-I/P
Design and Development of Tracking System for Mines Detector Robot
Design and Development of Sensing System for Mines Detector Robot
Numerical Stress Analysis of Epoxy Adhesively Bonded Dissimilar Joint
Experimental Validation on Time Base Analysis of Various Aircraft CFRP Panel Conditions for Structural Health Monitoring
Chapter 8: New Functional Materials
Estimation of Bioethanol Production from Jatropha curcas Using Neural Network
Carbon Powder as Additive in Near-Net-Shaping of Mechanical Components through Warm Forming Route
Thermophysical Properties of Ionic Liquid with Thiocyanate and Dicynamide Anions
The Fabrication of Codoped ZnO Thin Films by DC Magnetron Sputtering
Two-Step Sintering of Fine Barium Cerate-Zirconate Ceramics Electrolyte
Newly Developed Starch-Based Hydroxyethyl Cellulose Film with Wide Spectrum of pH-Colour Indicator
A Robust Approach for Detecting QRS Complexes of Electrocardiogram Signal with Different Morphologies
Influence of Additive on the Performance of Energy Conversion Solar Cell
Study on Physical and Chemical Properties of Fly Ash from Different Area in Malaysia
Feasibility Study of Waste Motor Recycling through Manual Dismantling and Hydrometallurgical Process
Short Term and Long Term Aging Effects of Asphalt Binder Modified with Montmorillonite
Sol-Gel Synthesis of Novel Silica Hybrid Xerogels: Porous Studies
Sol-Gel Synthesis and Preliminary Characterizations of Novel Silica Hybrid Xerogels
Radiation Shielding Characteristics of Concretes Incorporates Different Waste Materials
Seismic Performance of Insulated Sandwich Wall Panel Subjected to Lateral Cyclic Loading
Chapter 9: Optical and Photonic Materials
Enhance the Performance of Free Space Optical (FSO) Communication due to Atmospheric Turbulence via the Dual Diffuser Modulation (DDM)
A Tomography System Based on Optical and Electrodynamic Sensors
Comparison of Single Mode Fiber and Multimode Fiber in Deployment of SCM-OCDMA in Local Area Network
Increasing Capacity and Suppress the Crosstalk by Using Hybrid Optical OFDM/WDM System
Chapter 10: Optoelectronics
Effective Design for Fiber-to-the-Home Access Network Using Flexible Cross Correlation (FCC) Code
Realization of Wavelength-Time Modified Double Weight Codes Optical Code Division Multiple Access System
Channel Spacing Effect on SAC-OCDMA System Based Modified-AND Subtraction Detection Scheme
Chapter 11: Semi-Conductor and Micro-Electronic Materials
Defects Generation in Ge/GeO2 Structure
Analysis of Wetting of Perylene Diimide Thin Films-on-Glass by Water
Data-Driven Subspace Predictive Control for a MIMO System
Characterization of ProTEX (R) PSB Thin Film as a Photosensitive Layer for MEMS Capacitive Pressure Sensor Diaphragm Based on SiC-on-Si Wafer
Chapter 12: Testing and Evaluation of Materials
Drop Weight Impact Analysis of Laminated Polyurethane Foam/Cloisite 30B Clay
Leachability of Metal Ions in TCLP Leachate of Solidified Petroleum Sludge
Determination of Non-Linear Material Constants of RTV Silicone Applied to a Soft Actuator for Robotic Applications
Fatigue Crack Initiation and Growth of Aluminum Alloy with Stress Ratio Effects
A Study on Relationship between Porosity and Compressive Strength for Geopolymer Paste
Wear-Resistance of Nitrided W-Mo-High Speed Steel in Abrasive Wear Conditions
Performance of Thermoelectric Cooling System: Effect of Aluminium Heat Sink and Heat Dissipation
Effects of Knife Shapes and Cutting Speeds of a Mower on the Power Consumption for Pulverizing Sweet Potato Vine
The Effect of Solution Temperature on Electrodeposit-ZnO Thin Film
Effect Different Limb of Transformer Core Assemble on Performance
Chapter 1: Advanced Characterization
Application of InN Based Quantum Dot in Reducing Short Circuit Current Variation of Solar Cell above Room Temperature
Influence of Dolomite on the Mechanical Properties of Boiler Ash Geopolymer Paste
Effect of Varying Mixed Refrigerant Composition on Main Cryogenic Heat Exchanger Performance
Ionic Liquid Polymeric Membrane: Synthesis, Characterization & Performance Evaluation
Investigation on Impact Resistance Foamed Concrete Reinforced by Polypropylene Fibre
Characterization of Different Additives of Sintered Cobalt F-75 Alloy in Biomaterial Applications
The Behaviours of Steel Fiber as Main Reinfocement in High Performance Slurry Infiltrated Fiber Reinforced Concrete
Physical Characteristic of Zn Doped Soft Ferrites MxZn1-x Fe2O4
Preparation and Characterization of Activated Carbon Made from Oil Palm Empty Fruit Bunch
The Effect of Hydrochloric Acid on the Surface Area, Morphology and Physico-Chemical Properties of Sayong Kaolinite Clay
Effect of Filler Size on Flexural Properties of Calcium Carbonate Derived from Clam Shell Filled with Unsaturated Polyester Composites
Effect of Catalyst Calcination Temperature on the Synthesis of MWCNTs-Talc Hybrid Compound Using CVD Method
The Effect of Lemongrass as Lost Circulation Material (LCM) to the Filtrate and Filter Cake Formation
Synthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting Application
Compressive Strength of Fly Ash Based Geopolymer/Glass Fiber Composite via Filament Winding
Microstructure Study on Volcano Ash Geopolymer Aggregate at Different Sintering Temperature
The Need to Intensify Research Efforts in the Alternative to Lead Shot
Contribution of RHA Granules as Filler to Improve the Impact Resistance of Foamed Concrete
The Effect of Inoculation on Properties of Modified Ductile Ni-Resist Alloy
Effect of Annealing Atmosphere on the Morphology of Copper Oxide Thin Films Deposited on TiO2 Substrates Prepared by Sol-Gel Process
Synthesis and Characterization of Iron Produced from Iron Mill Scale
A Study of Liberation and Separation Process of Metals from Printed Circuit Boards (PCBs) Scraps
Effect of Pyrolysis Temperature on the Synthesis of Carbon Fiber from Natural Organic Waste
On the Fatigue of Shape Memory Alloys
On the Structure of Shape Memory Alloys
Effect of Fly Ash/Alkaline Activator Ratio and Sodium Silicate/NaOH Ratio on Fly Ash Geopolymer Coating Strength
Compressive Strength and Morphology of Fly Ash Based Geopolymer as Artificial Aggregate with Different Curing Temperature
Design and Development of Remote Communication System for Mines Detector Robot
Carbon Dioxide Separation Using Amine Modified Zeolite in Pressure Swing Adsorption System
Eco-Friendly Synthesis of Nanozeolite NaA from Rice Husk Ash and its Efficiency in Removing Ammonium Ions
On the Bioremediation Potential of Inhabitant Microbes of Dredged Marine Soils: A Theoretical Framework
Physicochemical Properties of Pyrolitic Carbon Black from Waste Tyres
Effect of Thickness for Sound Absorption of High Density Biopolymer Foams
Chapter 2: Biomaterials
Halal Based Sourced EM for Turbidity Reducing in Wastewater Treatment
Growth Kinetic of Fresh and Frezee-Dried Pleurotus sajor-caju (Oyster Mushroom) Mycelium for Preservation Study
Effect of Beta Tricalcium Phosphate (?-TCP) on Properties of Mg-Zn Composites
Potential of Five-Leaved Chaste Tree (Vitex negundo L.) Leaves as Source of Natural Dye from Supercritical Carbon Dioxide (SC-CO2) Extraction
Surface Engineered Poly(lactic acid) (PLA) Microspheres by Chemical Treatment for Drug Delivery System
Non-Linear Kinetic and Isotherm Modeling on the Adsorption of Lead (II) Ions from Aqueous Solution onto Monosodium Glutamate Functionalised Rubber Leaf Powder
Performance Evaluation of Okra (Abelmoschus esculentus) as Coagulant for Turbidity Removal in Water Treatment
Potential Use of Biofibers for Functional Immobilization of Lactobacillus rhamnosus NRRL 442
Effect of Oil Palm Empty Fruit Bunch-Grafted-Poly(Acrylic Acid-co-Acrylamide) Hydrogel Preparations on Plant Growth Performance
Novel Low-Cost Activated Carbon from Coconut Shell and its Adsorptive Characteristics for Carbon Dioxide
The Effect of Copigmentation on the Stability of Butterfly Pea Anthocyanins
Preparation and Characterization of Co-HA Powder Using Modified Electroless Method
Sintering Effects on Mechanical Properties of Co-Ha Composite Prepared by Modified Electroless Deposition
Preparation of Biodegradable Poly(lactic Acid) Electrospun Membrane with Decreased Pore Size by Post Heat Treatment
Adsorption Behavior of Methylene Blue on Ethylenediaminetetraacetic Dianhydride Modified Neem (Azadirachta indica) Leaf Powder
Anodic Oxidation of Titanium in Mixture of ?-Glycerophosphate (?-GP) and Calcium Acetate (CA)
Ultrafiltration Formulation of Cellulose Acetate / Polysulfone Blended Membrane
Extraction of Phenol and Acetic Acid from Synthetic Bio-Oil by Ammonium Sulfate Solution
Sound Absorption of Laminated Biopolymer Foam and Epoxy Foam
The Potential of Garlic Extract as Bio-Inhibitor in Urea Fertilizer
Solubility of Phoenix dactylifera Seed Oil in Supercritical Carbon Dioxide (Sc-Co2) Using Empirical Model
Development of Dense Hydroxyapatite-Ni by Modified Electroless Deposition Technique
Effect of Different Nickel Content on the Mechanical Properties of Hydroxyapatite-Ni Composites from Coated Powders
Chapter 3: Biotechnology and Life Sciences
Monitoring Initial Glucose Concentration for Optimum pH Control during Fermentation of Microbial Cellulose in Rotary Discs Reactor
Review on Malaysian and Thailand's Perspective towards Renewable Energy
Extraction of Silica from Palm Ash Using Organic Acid Leaching Treatment
Materials Research in Appropriate Technology: In the Midst of Science, Engineering, and Technology
Design and Optimization of a Monomer Processing Reactor
Landfill Leachate Treatment Using SSF-FWS Constructed Wetland Planted with Limnocharis flava and Eihhornia crassipes under Different Hydraulic Loading Rate
Methylene Blue Dye Adsorption to Durian Shell Activated Carbon
Oil Blends as Biolubricant: Screening of Effect Factors Influence to Basestock
High Yield Synthesis of Kojic Ester Using Dual Enzymes System and their Antibacterial Activity
Protein Produced by Bacillus subtilis ATCC21332 in the Presence of Cymbopogon flexuosus Essential Oil
Fabrication and Characterization of Multiwalled Carbon Nanotubes-Alumina Hybrid Compound: Comparison of Various Supported Catalyst
Chapter 4: Building Materials
The Effect of Cement Replacement Materials to the Hydration of Petroleum Sludge in OPC
Load versus Displacement Validation between Ruaumoko Hysteresis Program and Experimental Work on CFRP Retrofitted Precast Beam-Column Exterior Joint
Potential of RHA in Foamed Concrete Subjected to Dynamic Impact Loading
Feasibility Study on Composition and Mechanical Properties of Marine Clay Based Geopolymer Brick
New Processing Method of Kaolin-Based Geopolymer Brick by Using Geopolymer Brick Machine
Effect of Parawood Ash on Drying Shrinkage, Compressive Strength and Microstructural Characterization of Metakaolin-Based Geopolymer Mortar
Experimental Investigation of Flax FRP Tube Confined Coconut Fibre Reinforced Concrete
Experimental Evaluation of Profiled Steel Sheet Dry Board Wall Panel System
Fire Resistance Evaluation of Lightweight Geopolymer Concrete System Exposed to Elevated Temperatures of 100-800 degreesC
A Review on Ductile Self-Compacting Concrete
Experimental Analysis of Interlocking Load Bearing Wall Brickool System
Influence of Casting Direction on Fracture Energy of Fiber-Reinforced Cement Composites
Structural System of Safe House against Tornado and Earthquakes
The Utilization of Aluminum Waste as Sand Replacement in Concrete
Green Lightweight Concrete Made from Natural Para Rubber Product
An Overview of Fly Ash and Bottom Ash Replacement in Self-Compaction Concrete
Effect of Coconut Fibers Addition to early Age Unfired Soil Lime Bricks Strength
The Application of Brick Wall and Bamboo Reinforced Concrete Frame for Redevelopment of Traditional Houses in Pengotan Village
Properties of Lightweight Concrete Composites with Mixture of Fly Ash and Concrete Sludge Aggregate
Potential Use of Cameron Highlands Reservoir Sediment in Compressed Bricks
Performance of Simplified Damage Assessment Tools for Reinforced Concrete Panels under Blast Loading
Structural Lightweight Aggregate Concrete Containing High Volume Waste Materials
New Lightweight Construction Material: Cellular Mat Using Recycled Plastic
Challenges of Gathering User Requirement in eXtreme Programming Project: A Case Study of Highway Construction Monitoring System
Immediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface Methodology
Strength - Ultrasonic Pulse Velocity Relationship of Thermally Activated Alum Sludge Multiple Blended High Performance Concretes
Compressive Strength and Density of Cementless Unfired Lightweight Brick Utilizing Coal Ash from Coal-Fired Thermal Power Plant
Chapter 5: Coatings and Surface Engineering
Investigation of Workpiece Positioning Methods for Machining Oil-Pocket on Hip-Implant Spherical Surface
Study on Properties and Morphology of Kaolin Based Geopolymer Coating on Clay Substrates
Effect of Surface Roughness of Pure Aluminium A1100 on the Cold Work Extrusion by Using Different Angles of Taper Die
Chemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron Sputtering
Modeling of TiN Coating Thickness Using RSM Approach
Different Concentration of Al(NO3)3 in ZrO2/Al2O3 Double Layer Coating Steel Prepared by Electrolytic Method
Dynamic Contact Angle of Modified Biopolymer Droplet on Urea Surface: Temperature Effects
Characteristic and Corrosion Studies of Rare Earth (REE) Based Anodizing on AZ91D Magnesium Alloy
Effect on Strength and Hardness of Clay Ceramic Substrate after Treatment Using Koalin Based Geopolymer Glaze
Protective CuO Coating Synthesis via Electrodeposition of Copper on AISI 430 Ferritic Steel for SOFC Interconnect Applications
Surface Morphology and Corrosion Behavior of Electrolytic Coatings in Different Aqueous Solutions
Chapter 6: Composites and Polymer Materials
Warpage Analysis with Straight Drilled and Conformal Cooling Channels on Front Panel Housing by Using Taguchi Method
Investigation on the Effect of TiO2 Nanofiller to the Structural and Conductivity Characteristics of Poly(vinylidene fluoride-co-hexafluoropropylene)/Poly(ethyl methacrylate) Based Polymer Electrolytes System
Structural and Electrical Characterization of Hexanoyl Chitosan-LiClO4-TiO2-DMC Polymer Electrolytes
Effects of Trans-Polyoctylene Rubber in Polypropylene/Recycled Acrylonitrile Butadiene/Rice Husk Powder Composites
Effect of Empty Fruit Bunch (EFB) Fiber on Mechanical Properties of HDPE/EVA/MMT/EFB Nanohybrid Biocomposite
General Lifetime Damage Model for Glass Fibre Reinforced Epoxy (GRE) Composite Pipes under Multiaxial Loading
Properties of Fresh and Hardened Glass Fiber Reinforced Fly Ash Based Geopolymer Concrete
Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Ternary Blend: Curing Characteristics and Swelling Test
Modification of Pin on Disc Test to Measure Railway Brake Block Friction Coefficient
Kenaf Bast-Unsaturated Polyester Composite: The Effect of Different Alkaline Treatment Condition on Tensile Properties
The Effect of Chloride Environment on Mechanical Properties Geopolymer Binder with Fly Ash
Hexanoyl Chitosan-Polystyrene Blend Based Composite Polymer Electrolyte with Surface Treated TiO2 Fillers
Effects of Drilling Generated Heat on Damage Factor in GFRP
Low and High Temperature Isothermal Aging Effect on Morphology and Diffusion Kinetics of Intermetallic Compound (IMC) for Sn-Cu-Si3N4 Composite Solder
Polyolefin Layered Silicates Nanocomposites - A Review
Warpage Analysis between Straight and Conformal Cooling Channels on Thin Shallow Shell
Effect of Carbon Nanotubes on the Compression Test and Energy Absorption of Aluminium/Polyurethane-Carbon Nanotubes Foam Sandwich
Effect of Chemical Treatment on the Mechanical Properties of Pultruded Kenaf Fibre Reinforced Polyester Composites
Ionic Conductivity, Morphology and Transference Number of Sodium Ion in PMMA Based Gel Polymer Electrolytes
The Outcome of Sintering Parameters Study toward the Thermal Properties of CuSiC Composite
Axial Crushes on Composite Laminated Square Tubes under Compressive Loading
Crush Force Efficiency of Composite Square Profile under Off-Axis Loading
Tensile and Morphological Properties of Low Density Polyethylene/Spear Grass Composites
Effect of Alkali Treatment on Crystalline Structure of Cellulose Fiber from Mendong (Fimbristylis globulosa) Straw
Properties of Natural Rubber/Ethylene Propylene Diene Monomer/Recycled Latex Catheter (NR/EPDM/rLC) Ternary Blends: Cure Characteristics and Hardness
Structure and Properties of SiC Coated R6M5 High-Speed Steel
The Influence of Cure Characteristics and Crosslink Density of Virgin Acrylonitrile Butadiene Rubber/Recycled Acrylonitrile Butadiene Rubber (vNBR/rNBR) Blends
Production of Silicon Carbide via Grinding and Heat Treatment Process
Rubber Toughened Polyamide 6/High Density Polyethylene/HDPE-g-MAH Nanocomposites with Ethylene Vinyl Acetate
Influence of Multilayer Textile Biopolymer Foam Doped with Titanium Dioxide for Sound Absorption Materials
Influence of High Doping of TiO2 of Polymeric Foam for Acoustic Study
Utilization of Treated Red Meranti Wood Dust as Polymer Foam Composite for Acoustic Study
Mixing Optimization of Sn-Cu-Si3N4 via Powder Metallurgy Route for Composite Solder Fabrication
Effect Maleic Anhydride Polypropylene on Properties of Calcium Carbonate Filled Polypropylene/Ethylene Propylene Diene Terpolymer Composites
Tensile and Morphology Properties of Polylactic Acid/Treated Typha latifolia Composites
Effect of Organic Space Holder in Fabrication of Cloced-Cell Aluminium Foam
Studies on Sodium Ion Conducting Gel Polymer Electrolytes
Removal of Nickel Ions from Aqueous Solution by Polypyrrole Conducting Polymer
Lignin Loading Effect on Biodegradability and Nitrogen Release Properties of Urea Modified Tapioca Starch in Wet Soil
The Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Tensile Properties and Morphology
The Influence of CB, Silica and CaCO3 on Tensile and Morphological Properties of vPE/rPE/EPDM Blends
Strain Distribution on Reinforcement of Concrete Beams Reinforced with Glass Fiber Reinforced Polymer (GFRP) Bars
Conductivity and Dielectric Studies of Methylcellulose/Chitosan-NH4CF3SO3 Polymer Electrolyte
The Effect of Methylene Diphenyl Diisocyanate on the Nonisothermal Properties of Polylactic Acid/Elaeis guineensis Fibres Biocomposites
Effect of Different Tex Number and Surfacing Veil Application on the Pultruded Kenaf Reinforced Composites (PKRC) under Natural Weathering Exposure
Comparison Study in Consolidation of Yttria Reinforced Iron-Chromium Composites Using Conventional and Microwave Sintering Technique
Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene
Comparison between Single and Multi Gates for Minimization of Warpage Using Taguchi Method in Injection Molding Process for ABS Material
Cu-SiCp Composites as Advanced Electronic Packaging Materials
Thermal Expansion Behavior of the Electroless Copper Coated Cu-SiCp Composites Fabricated via the Conventional Powder Metallurgical Technique
Physical and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends - The Effects of TOR as a Compatibilizer
The Effects of Carbon Black and Calcium Carbonate as a Filler on Cure Characteristic and Physical Properties of SBR/CRr Blends
High Sensitivity Humidity Sensor Based on ZnSnO3 Composite Nanocube
Preparation of Polyethersulfone Ultrafiltration Membrane Surface Coated with TiO2 Nanoparticles and Irradiated under UV Light
Effect of Volume Plasticizers on the Thermal Performance of Tacca leontopetaloides Starch Biopolymer
Chapter 7: Computational Materials Science
Filling Missing Data Using Interpolation Methods: Study on the Effect of Fitting Distribution
Evaluation Grain Homogeneity of Aluminium after ECAP Process by ECAP Geometry Analysis Using Taguchi Method
Mean Imputation Techniques for Filling the Missing Observations in Air Pollution Dataset
Compressive Behavior of AA6061 at Room Temperature and Validation of the FE Model Based on Optical 3D Measurement Technique
Photovoltaic Powered Uninterruptible Power Supply Using Microcontroller PIC16F628-I/P
Design and Development of Tracking System for Mines Detector Robot
Design and Development of Sensing System for Mines Detector Robot
Numerical Stress Analysis of Epoxy Adhesively Bonded Dissimilar Joint
Experimental Validation on Time Base Analysis of Various Aircraft CFRP Panel Conditions for Structural Health Monitoring
Chapter 8: New Functional Materials
Estimation of Bioethanol Production from Jatropha curcas Using Neural Network
Carbon Powder as Additive in Near-Net-Shaping of Mechanical Components through Warm Forming Route
Thermophysical Properties of Ionic Liquid with Thiocyanate and Dicynamide Anions
The Fabrication of Codoped ZnO Thin Films by DC Magnetron Sputtering
Two-Step Sintering of Fine Barium Cerate-Zirconate Ceramics Electrolyte
Newly Developed Starch-Based Hydroxyethyl Cellulose Film with Wide Spectrum of pH-Colour Indicator
A Robust Approach for Detecting QRS Complexes of Electrocardiogram Signal with Different Morphologies
Influence of Additive on the Performance of Energy Conversion Solar Cell
Study on Physical and Chemical Properties of Fly Ash from Different Area in Malaysia
Feasibility Study of Waste Motor Recycling through Manual Dismantling and Hydrometallurgical Process
Short Term and Long Term Aging Effects of Asphalt Binder Modified with Montmorillonite
Sol-Gel Synthesis of Novel Silica Hybrid Xerogels: Porous Studies
Sol-Gel Synthesis and Preliminary Characterizations of Novel Silica Hybrid Xerogels
Radiation Shielding Characteristics of Concretes Incorporates Different Waste Materials
Seismic Performance of Insulated Sandwich Wall Panel Subjected to Lateral Cyclic Loading
Chapter 9: Optical and Photonic Materials
Enhance the Performance of Free Space Optical (FSO) Communication due to Atmospheric Turbulence via the Dual Diffuser Modulation (DDM)
A Tomography System Based on Optical and Electrodynamic Sensors
Comparison of Single Mode Fiber and Multimode Fiber in Deployment of SCM-OCDMA in Local Area Network
Increasing Capacity and Suppress the Crosstalk by Using Hybrid Optical OFDM/WDM System
Chapter 10: Optoelectronics
Effective Design for Fiber-to-the-Home Access Network Using Flexible Cross Correlation (FCC) Code
Realization of Wavelength-Time Modified Double Weight Codes Optical Code Division Multiple Access System
Channel Spacing Effect on SAC-OCDMA System Based Modified-AND Subtraction Detection Scheme
Chapter 11: Semi-Conductor and Micro-Electronic Materials
Defects Generation in Ge/GeO2 Structure
Analysis of Wetting of Perylene Diimide Thin Films-on-Glass by Water
Data-Driven Subspace Predictive Control for a MIMO System
Characterization of ProTEX (R) PSB Thin Film as a Photosensitive Layer for MEMS Capacitive Pressure Sensor Diaphragm Based on SiC-on-Si Wafer
Chapter 12: Testing and Evaluation of Materials
Drop Weight Impact Analysis of Laminated Polyurethane Foam/Cloisite 30B Clay
Leachability of Metal Ions in TCLP Leachate of Solidified Petroleum Sludge
Determination of Non-Linear Material Constants of RTV Silicone Applied to a Soft Actuator for Robotic Applications
Fatigue Crack Initiation and Growth of Aluminum Alloy with Stress Ratio Effects
A Study on Relationship between Porosity and Compressive Strength for Geopolymer Paste
Wear-Resistance of Nitrided W-Mo-High Speed Steel in Abrasive Wear Conditions
Performance of Thermoelectric Cooling System: Effect of Aluminium Heat Sink and Heat Dissipation
Effects of Knife Shapes and Cutting Speeds of a Mower on the Power Consumption for Pulverizing Sweet Potato Vine
The Effect of Solution Temperature on Electrodeposit-ZnO Thin Film
Effect Different Limb of Transformer Core Assemble on Performance