Key Engineering Materials - Development and Application

The Influence Analysis of Stiffness on Stringer Layout and Dimension of Full Composite WingProperties of Epoxy/Carbon Black/Graphite Composites for Bipolar Plate in Polymer Electrolyte Membrane Fuel CellThe Influence of Alkaline Treatment on Mechanical Properties and Morphology of Rice Husk Fibre Reinforced Polylactic AcidThermal Modulus Evaluation of Arenga pinnata Fibre Reinforced Epoxy Composite: Effect of Moisture AbsorptionWood Shavel Composites with Friendly Environment Based BinderThermal Insulating Materials for Energy Storage ApplicationSurface Treatment of Rubber Toughened Polyester Filled Carbon Black and Kenaf Hybrid CompositePreliminary Study of Oil Palm Decanter Cake Natural Polymer Composite (OPDC-NPC)Characterization of Nafion/Silica Hybrid Composite Membranes for Redox Flow Battery (RFB) ApplicationsStudy of Pore Closure Mechanism of Aluminium Composite Processed through Powder Metallurgy RouteGrowth of Porous Alumina Layer and Cerium Sealing of Al7xxx/SiC Composite for Structural Lightweight Alloy Corrosion Resistant ApplicationDamage Size Classification of Natural Fibre Reinforced Composites Using Neural NetworkDensification and Corrosion Studies of as-Sintered-Swaged Al Composite PreformsSynthesized Hydroxyapatite Powder from Clamshell via Chemical Precipitation MethodChemical Properties of Waste Tyre Rubber GranulesCorrosion Behavior of WC-Co in High Sulphate ContentCalculating of the Relative Preference of Criteria Affecting Electroless Coating of Alumina Nano Particles on Ni-B by Analytic Hierarchy Process (AHP) MethodHydrothermal Synthesis and Photocatalytic Properties of BiPO4/Ag3PO4 Heterostructure for Phenol DecompositionLaser Cladding of Wear Resistant Stellite 6 Coating on P22 Steel Substrate with Two Different Energy InputsEffect of TiO2 Nanofillers on Mechanical Properties of PVC/ENR/TiO2 NanocompositesEffects of UV Radiation and pH of Tannic Acid Solution in the Synthesis of Silver NanoparticlesEffects of Processing Method and Nanofiller Size on Mechanical Properties of Biomedical Thermoplastic Polyurethane (TPU) NanocompositesNatural Zeolite Incorporated in Zinc Oxide Nanoparticles Doped with Manganese for Degradation of Organic Dye in Water under UV Light IrradiationHydrothermal Synthesis and Characterisation of Cu Doped TiO2 Nanotubes for Photocatalytic Degradation of Methyl OrangeSynthesis and Fabrication of PVA-Ag-Cu and PANI-Ag-Cu Nanocomposite Thin Film Sensor for Detection of E. coli in WaterGrowth of Cobalt Nanowires under External Magnetic FieldEvaluation of Matrix and Geometric Strain Hardening of Axial Deformed Sintered Fe-0.75%C PreformNew Method of Phase Transformations Calculation in Metals with Structural Features of the Initial and New PhasesOptimization of the Compositions of the High Strength Casting Aluminium Alloys Based on Nickel EutecticExperimental Study of Impact Strength of Al-6063 Alloy Processed by Equal Channel Angular ExtrusionSome Aspects on Cold Deformation Characteristics of Sintered Fe-0.8%C-1%Si-0.4%Cu Steel PreformsDiffusion Bonding of Mg/Cu Alloy with Zn Interlayer MetalThe Influence of Fe Additives on Silica Brick MicrostructurePrediction of Flow Stress Anisotropy and Tension Compression Asymmetry of Hot Rolled AZ31B Mg AlloyEffect of Barium-to-Strontium on Leakage Current Mechanism of Sol-Gel BaxSr1-xTiO3 Thin FilmsPerformance Investigation of Non-Linear Insulator against Surface Tracking on Wind Turbine Blade SurfaceThe Effects of Excess Calcium and Aging Media on the Mechanical Properties of Calcium Phosphate Filling MaterialsThe Potential of Starch as an Eco-Friendly Binder in Injection Moulding of 316L Stainless Steel for Medical Devices ApplicationsDeposition of BaZr0.10Ti0.90O3 Thin Films Doped Strontium by Sol Gel MethodInduction Hardening of Carbon Steel Material: The Effect of Specimen DiameterOptimum Heat Treatment of Extrusion Die SteelModeling and Influence of Machining Parameters on Titanium AloyEvaluation of Thermal Gelation of F-127 in a Non-Aqueous Solvent and its Suitability as a Support Material for Additive ManufacturingBasic Study on Creep Properties of Eucalyptus WoodThermal Performance on Unglazed Photovoltaic Thermal Polymer CollectorThe Effects of Temperature on Rheology Properties and Filtrate after Using Lemongrass as Lost Circulation Materials for Oil Based Drilling MudMicrostructure Study on Gd-Doped BaTiO3 Sol-Gel Multilayer Thin Films Using AFM for Optoelectronic ApplicationsIntrinsic Ferroelectric Coercive Field Calculation for BZT Films Doped by Indium and LanthanumApplying the Recovery Voltage Method (RVM) to Study the Degradation of High Power Transformer InsulationPlatinum-Incorporating Graphene Counter Electrode for In2O3-Based DSSC with Various Annealing TemperaturesDefect Distribution and Yield Analysis Technique on Silicon WaferDiamond Microelectrodes for Amperometric Oxygen SensorMaterials and Processes in Heat Assisted Magnetic RecordingCharacterization and Composition of Oil Extracted from Bastard Poom Beans (Sterculia foetida L) and its Potential as a BiofuelMonitoring of Draft Beer Fermentation Process by Electronic NoseOptimization of Mannose Yield from Deproteinated Palm Kernel Cake via Dilute Fumaric Acid HydrolysisImidazolium-Based Ionic Liquid Dissolution Influence on Crystallinity of Oil Palm Frond, Oil Palm Trunk and Elephant Grass Lignocellulosic BiomassBiogrowth of Escherichia coli in Bio-Ionic MediaAdsorption Capacity of Nickel (II) and Cobalt (II) Ions from Aqueous Solutions by Oil Palm Waste and SawdustAdsorption of Methyl Violet Dye from Aqueous Solutions by Activated Carbon Produced from Tamarind SeedsCocoa Pod Husk and Corn Stalk: Alternative Paper Fibres Study on Chemical Characterization and Morphological StructuresBiodegradable Polymers as Matrices for Control Drug DeliveryModulation of Fibrin Gel Extracellular Matrix Properties by Fibrinogen and Thrombin Concentrations for Angiogenesis AssayElectrokinetics-Based Microfluidic Technology for the Rapid Separation and Concentration of Bacteria/Cells/BiomoleculesPreparation and Characterization of Flexible Polyurethane Foams from Palm Oil-Based PolyolThe Effect of Backbone Disorder on Electrical Conductivity of Poly(dG)-Poly(dC) DNA Molecule at Room TemperatureA Study on the Hard Wearing UV Treated Photopolymer Printing Plate for Articular Replacement/Arthroplasty (Biomedical)Rheological Properties of Hydroxyapatite Synthesized Clamshell Mix with Palm Stearin Binder SystemIgnition by Thermal Radiation of Polyethylene and Human Feces Combustible Wastes: Time and Temperature to IgnitionDischarge Assessment by Using Integrated Hydrologic Model for Environmental Technology DevelopmentA Radical Rethink on Soot Containment from Auto-Rickshaw ExhaustsPotential Utilization of Catalyst for the Combustion of Wood in HouseholdsThe Study of Soil Physical and Chemical Properties in Plant Genetic Protection Area of RSPG, Nampung Dam EGAT, ThailandPhysical Contaminants Removal from Continuous Process of Water Filtration by a New Low-Cost Palm Shell CharcoalRutting Evaluation of Aged Binder Containing Waste Engine OilDevelopment of Ca(OH)2 Nanosorbent for Intermediate-High Temperature CO2 Capture via Wet Chemical Route in N,N-Dimethylformamide SolventNovel Aragonite CaCO3 Adsorbents: Synthesis, Characterization and CO2 AdsorptionEnhanced Thermal Stability and Flame Retardancy of a Novel Transparent Poly(Methyl Methacrylate)-Based CopolymerInfluence of Blast Furnace Slag Content on High Performance Concrete BehaviorEffect of Coarse Aggregate Sizes on Properties of Porous Concrete Paving BlocksDeflection Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete BeamAir Void Characterisation in Porous Asphalt Using X-Ray Computed TomographyInvestigations of Rubber Dipping by-Product on Bitumen PropertiesPorous Concrete Pavement Containing Nano-Silica: Pre-ReviewFatigue Life Prediction of Austenitic Type 316L Stainless Steel Using ABAQUSMechanical Properties of Double Layer Rubberized Concrete Paving BlocksInformation Base for the Optimal Choice of Retaining StructuresCracking Propagation of Reinforced Concrete Using Polyethylene Terephtalate (PET) Bottles as Fine AggregateOptimized Cost of High Performance Concrete in the BuildProperties Comparisons and Cost Analysis of Asphaltic Cement Grade 80/100 and 60/70 Modified with Crumb Rubber and SBS PolymerCompressive and Flexural Strength of Foamed Concrete Containing Polyolefin FibersCorrosion of the Pozzolan Concrete in SulfatesFailure Prediction of Normally Consolidated Clays Using Stress Paths of Consolidated Undrained TestsAn Empirical Study on Time Lag Phenomenon Regarding Summertime Indoor Thermal Environments in the Domestic Buildings of Different Construction Types in Hot-Humid Climate Zone