Key Engineering Materials - Development and Application

Preface, Committees and Sponsors
Chapter 1: Novel Composite Materials in Vivid Applications
The Influence Analysis of Stiffness on Stringer Layout and Dimension of Full Composite Wing
Properties of Epoxy/Carbon Black/Graphite Composites for Bipolar Plate in Polymer Electrolyte Membrane Fuel Cell
The Influence of Alkaline Treatment on Mechanical Properties and Morphology of Rice Husk Fibre Reinforced Polylactic Acid
Thermal Modulus Evaluation of Arenga pinnata Fibre Reinforced Epoxy Composite: Effect of Moisture Absorption
Wood Shavel Composites with Friendly Environment Based Binder
Thermal Insulating Materials for Energy Storage Application
Surface Treatment of Rubber Toughened Polyester Filled Carbon Black and Kenaf Hybrid Composite
Preliminary Study of Oil Palm Decanter Cake Natural Polymer Composite (OPDC-NPC)
Characterization of Nafion/Silica Hybrid Composite Membranes for Redox Flow Battery (RFB) Applications
Study of Pore Closure Mechanism of Aluminium Composite Processed through Powder Metallurgy Route
Growth of Porous Alumina Layer and Cerium Sealing of Al7xxx/SiC Composite for Structural Lightweight Alloy Corrosion Resistant Application
Damage Size Classification of Natural Fibre Reinforced Composites Using Neural Network
Chapter 2: Studies on Corrosion, Coating and Aspects of Chemical Engineering
Densification and Corrosion Studies of as-Sintered-Swaged Al Composite Preforms
Synthesized Hydroxyapatite Powder from Clamshell via Chemical Precipitation Method
Chemical Properties of Waste Tyre Rubber Granules
Corrosion Behavior of WC-Co in High Sulphate Content
Calculating of the Relative Preference of Criteria Affecting Electroless Coating of Alumina Nano Particles on Ni-B by Analytic Hierarchy Process (AHP) Method
Hydrothermal Synthesis and Photocatalytic Properties of BiPO4/Ag3PO4 Heterostructure for Phenol Decomposition
Laser Cladding of Wear Resistant Stellite 6 Coating on P22 Steel Substrate with Two Different Energy Inputs
Chapter 3: Trends in the Development of Nanomaterials, Nanocomposites and Nanotechnology
Effect of TiO2 Nanofillers on Mechanical Properties of PVC/ENR/TiO2 Nanocomposites
Effects of UV Radiation and pH of Tannic Acid Solution in the Synthesis of Silver Nanoparticles
Effects of Processing Method and Nanofiller Size on Mechanical Properties of Biomedical Thermoplastic Polyurethane (TPU) Nanocomposites
Natural Zeolite Incorporated in Zinc Oxide Nanoparticles Doped with Manganese for Degradation of Organic Dye in Water under UV Light Irradiation
Hydrothermal Synthesis and Characterisation of Cu Doped TiO2 Nanotubes for Photocatalytic Degradation of Methyl Orange
Synthesis and Fabrication of PVA-Ag-Cu and PANI-Ag-Cu Nanocomposite Thin Film Sensor for Detection of E. coli in Water
Growth of Cobalt Nanowires under External Magnetic Field
Chapter 4: Advances in Materials and Manufacturing Technology
Evaluation of Matrix and Geometric Strain Hardening of Axial Deformed Sintered Fe-0.75%C Preform
New Method of Phase Transformations Calculation in Metals with Structural Features of the Initial and New Phases
Optimization of the Compositions of the High Strength Casting Aluminium Alloys Based on Nickel Eutectic
Experimental Study of Impact Strength of Al-6063 Alloy Processed by Equal Channel Angular Extrusion
Some Aspects on Cold Deformation Characteristics of Sintered Fe-0.8%C-1%Si-0.4%Cu Steel Preforms
Diffusion Bonding of Mg/Cu Alloy with Zn Interlayer Metal
The Influence of Fe Additives on Silica Brick Microstructure
Prediction of Flow Stress Anisotropy and Tension Compression Asymmetry of Hot Rolled AZ31B Mg Alloy
Effect of Barium-to-Strontium on Leakage Current Mechanism of Sol-Gel BaxSr1-xTiO3 Thin Films
Performance Investigation of Non-Linear Insulator against Surface Tracking on Wind Turbine Blade Surface
The Effects of Excess Calcium and Aging Media on the Mechanical Properties of Calcium Phosphate Filling Materials
The Potential of Starch as an Eco-Friendly Binder in Injection Moulding of 316L Stainless Steel for Medical Devices Applications
Deposition of BaZr0.10Ti0.90O3 Thin Films Doped Strontium by Sol Gel Method
Induction Hardening of Carbon Steel Material: The Effect of Specimen Diameter
Optimum Heat Treatment of Extrusion Die Steel
Modeling and Influence of Machining Parameters on Titanium Aloy
Evaluation of Thermal Gelation of F-127 in a Non-Aqueous Solvent and its Suitability as a Support Material for Additive Manufacturing
Basic Study on Creep Properties of Eucalyptus Wood
Thermal Performance on Unglazed Photovoltaic Thermal Polymer Collector
The Effects of Temperature on Rheology Properties and Filtrate after Using Lemongrass as Lost Circulation Materials for Oil Based Drilling Mud
Chapter 5: Electrical, Electronic and Optoelectronic Materials: Synthesis and Applications
Microstructure Study on Gd-Doped BaTiO3 Sol-Gel Multilayer Thin Films Using AFM for Optoelectronic Applications
Intrinsic Ferroelectric Coercive Field Calculation for BZT Films Doped by Indium and Lanthanum
Applying the Recovery Voltage Method (RVM) to Study the Degradation of High Power Transformer Insulation
Platinum-Incorporating Graphene Counter Electrode for In2O3-Based DSSC with Various Annealing Temperatures
Defect Distribution and Yield Analysis Technique on Silicon Wafer
Diamond Microelectrodes for Amperometric Oxygen Sensor
Materials and Processes in Heat Assisted Magnetic Recording
Chapter 6: Biomaterials and Biotechnology in Different Applications
Characterization and Composition of Oil Extracted from Bastard Poom Beans (Sterculia foetida L) and its Potential as a Biofuel
Monitoring of Draft Beer Fermentation Process by Electronic Nose
Optimization of Mannose Yield from Deproteinated Palm Kernel Cake via Dilute Fumaric Acid Hydrolysis
Imidazolium-Based Ionic Liquid Dissolution Influence on Crystallinity of Oil Palm Frond, Oil Palm Trunk and Elephant Grass Lignocellulosic Biomass
Biogrowth of Escherichia coli in Bio-Ionic Media
Adsorption Capacity of Nickel (II) and Cobalt (II) Ions from Aqueous Solutions by Oil Palm Waste and Sawdust
Adsorption of Methyl Violet Dye from Aqueous Solutions by Activated Carbon Produced from Tamarind Seeds
Cocoa Pod Husk and Corn Stalk: Alternative Paper Fibres Study on Chemical Characterization and Morphological Structures
Biodegradable Polymers as Matrices for Control Drug Delivery
Modulation of Fibrin Gel Extracellular Matrix Properties by Fibrinogen and Thrombin Concentrations for Angiogenesis Assay
Electrokinetics-Based Microfluidic Technology for the Rapid Separation and Concentration of Bacteria/Cells/Biomolecules
Preparation and Characterization of Flexible Polyurethane Foams from Palm Oil-Based Polyol
The Effect of Backbone Disorder on Electrical Conductivity of Poly(dG)-Poly(dC) DNA Molecule at Room Temperature
A Study on the Hard Wearing UV Treated Photopolymer Printing Plate for Articular Replacement/Arthroplasty (Biomedical)
Rheological Properties of Hydroxyapatite Synthesized Clamshell Mix with Palm Stearin Binder System
Chapter 7: Materials and Technologies in Environmental Engineering
Ignition by Thermal Radiation of Polyethylene and Human Feces Combustible Wastes: Time and Temperature to Ignition
Discharge Assessment by Using Integrated Hydrologic Model for Environmental Technology Development
A Radical Rethink on Soot Containment from Auto-Rickshaw Exhausts
Potential Utilization of Catalyst for the Combustion of Wood in Households
The Study of Soil Physical and Chemical Properties in Plant Genetic Protection Area of RSPG, Nampung Dam EGAT, Thailand
Physical Contaminants Removal from Continuous Process of Water Filtration by a New Low-Cost Palm Shell Charcoal
Rutting Evaluation of Aged Binder Containing Waste Engine Oil
Development of Ca(OH)2 Nanosorbent for Intermediate-High Temperature CO2 Capture via Wet Chemical Route in N,N-Dimethylformamide Solvent
Novel Aragonite CaCO3 Adsorbents: Synthesis, Characterization and CO2 Adsorption
Chapter 8: Development and Application Novel Materials and Technologies in Civil Engineering
Enhanced Thermal Stability and Flame Retardancy of a Novel Transparent Poly(Methyl Methacrylate)-Based Copolymer
Influence of Blast Furnace Slag Content on High Performance Concrete Behavior
Effect of Coarse Aggregate Sizes on Properties of Porous Concrete Paving Blocks
Deflection Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete Beam
Air Void Characterisation in Porous Asphalt Using X-Ray Computed Tomography
Investigations of Rubber Dipping by-Product on Bitumen Properties
Porous Concrete Pavement Containing Nano-Silica: Pre-Review
Fatigue Life Prediction of Austenitic Type 316L Stainless Steel Using ABAQUS
Mechanical Properties of Double Layer Rubberized Concrete Paving Blocks
Information Base for the Optimal Choice of Retaining Structures
Cracking Propagation of Reinforced Concrete Using Polyethylene Terephtalate (PET) Bottles as Fine Aggregate
Optimized Cost of High Performance Concrete in the Build
Properties Comparisons and Cost Analysis of Asphaltic Cement Grade 80/100 and 60/70 Modified with Crumb Rubber and SBS Polymer
Compressive and Flexural Strength of Foamed Concrete Containing Polyolefin Fibers
Corrosion of the Pozzolan Concrete in Sulfates
Failure Prediction of Normally Consolidated Clays Using Stress Paths of Consolidated Undrained Tests
An Empirical Study on Time Lag Phenomenon Regarding Summertime Indoor Thermal Environments in the Domestic Buildings of Different Construction Types in Hot-Humid Climate Zone