Advances in Fracture and Materials Behavior

Committees, Sponsors
Preface
Fracture Mechanics and Mechanisms
Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moire Interferometry
Effect of Cooling Rate on Strength and Fracture Surfaces of Alpha Brass Casting
Effects of Distance and Alignment Holes on Fatigue Crack Behaviors of Cast Magnesium Alloys
Research on the Plastic Work Rate Consumed in the Process Zone for the Growth of Triaxial-Stress-State Crack
Study on Ductile Fracture Including Shear-Lip Fracture under Mixed Mode Loading Condition
Fracture Analysis for Damaged Aircraft Fuselage Using Substructure Method
Experimental Investigation of the Size Effects on the Fracture Toughness and Tearing Modulus
Torsion Fracture Behavior of Drawn Pearlitic Steel Wires with Different Heat Treatments
Analysis of Interfacial Debonding of RC Beams Strengthened with CFL
Fatigue Crack Growth Simulations and Experimental Findings for SEN-Specimens under Different Loadings
Regular Fracture Control of Pressed Notch Bar under Three-Point Bending
Fracture Mechanics Analysis on Smart-Cut (R) Technology: Effects of Stiffening Wafer and Defect Interaction
Examination of the Optimal Local Model Size of Structure with a Surface Crack in the 3-D Local Hybrid Method
Probabilistic Fracture Mechanics Analysis for Optimization of High-Pressure Vessel Inspection
Study on the Stress Intensity Factor for Mixed Mode Surface Crack under Three Point Bending
Different Delamination Cracks during Fracture and Their Influences on the Fracture of X70 Pipeline Steel
Crack Tip Plasticity By Classic Dislocation Dynamics
Effective Use of Commercial FEM Software in 2-Dimentional Crack Problems
Fatigue and Crack Propagation
Fatigue Analysis for CNG Storage Gas Pressure Vessel Based on ANSYS
Uniaxial Ratchetting-Fatigue Interaction of Tempered 42CrMo Steel and its Failure Model
Effect of Size and Location of a Weld Defect on Fatigue Life for Argon-Arc Welded Titanium Alloy Joint
The Failure Process Analysis on a Numerical Model of a Branching-Out Tunnel under Lateral Overload Action
Fatigue Crack Growth Simulation Using S-Version FEM
Stress Classification and Fatigue Life Assessment of Modular Component with Asymmetric Perforated Parts

In Situ Observation of Fatigue Crack Growth and 90? Domain Switching for BaTiO3 Ferroelectric Single Crystal under Cyclic Electric Loading
Fatigue Life of Multi-Lap Welding of Automotives Steel Sheet by QSTS
Fatigue Life Evaluation of Spot Weldment Using GA and FEM
Experimental Study on Fatigue Life of Steel Beams Strengthened with a CFRP Plate
Experimental Study on the Fatigue Properties of RC Beam Strengthened by Prestressed CFL
Crack Growth Life Estimating for MSD Panel
Peculiarity of Accelerated Propagation of Fatigue Crack for Medium Carbon Steel under Variable Amplitude Loading
Evaluation of Fatigue Crack Growth of Interacting Surface Cracks
Prediction of the Fatigue Life Based on Stiffness Degradation Concept
Effect of Load Direction on Crack Propagation in High-Temperature Fatigue of Directionally Solidified Superalloy
Fatigue Analysis of Locking Parts in the Gauge-Adjustable Wheelsets System Considering the Variation of the Fatigue Strength
Probabilistic Analysis of Cracked Structures With Uncertainty Parameters
Fatigue Behaviors of a NiCrAlYSi Coated Directionally Solidified Nickel Base Superalloy
Strain and Martensitic Phase Distributions around Fatigue Cracks in SUS304 Stainless Steel
Study of Fretting Fatigue Crack Initiation For Riveted Al 6xxx Components
Optimization of Integrally Stiffened Panels Based on Crack Propagation Life
Fatigue Life of Thread Connection for Casing Drilling under Tension and Torsion
Experimental Study on Fatigue Crack Growth and Residual Strength of Steel 30CrMnSiNi2A under Mixed Corrosive Environments
Fatigue of Metal Free Reed due to Self-Excited Oscillation
Characterizing Fatigue Crack Closure by Numerical Analysis
Damage Tolerance and Fracture Control
Damage Identification of Multi-Type Joints with Using Electro-Impedance Method by Smart Sensors
Improved Impedance Method and Guided Wave Technique for Damage Assessment of Beam Structures Using PZT Patches
Residual Strength Analysis of Stiffened Aluminum Panels with Widespread Fatigue Damage
Study on the Damage Tolerance of a Stiffened Panel with a Skin Pad
Interface Failure and Delamination
Evaluation on Interface Fracture Behavior of HVAS Coating/Substrate System Based on Weibull Stress Criterion
Subsonic Interface Crack with Crack Face Contact
Location of Initial Debonding and Stress Singularity at Interface End
Analysis of the Load-Carrying Capability of the Casing Plug Joint of Steel Tube Structures Considering the Contact Effect
Interfacial Fracture Analysis of Adhesive-Bonded Joints
Interaction between a Rigid Cylinder with a Piezoelectric Half-Space with Partial Adhesion
Peeling Rate Dependency of Delamination Behavior of Adhesives
Dynamic Fracture and Impact Problem
Compressive Properties for Alumina Subjected to Shock Loading
Research on Mode I and Mode II Dynamic Fracture in High Strength Steels under High Loading Rates
Effect on Dynamic Biaxial Fracture Behaviors by Different Heat Treatments on Magnesium Alloy
Numerical Solution of Elas-Plastic Impact Load of Tube Column
Hierarchical Adaptive Mesh for FEM Simulations of Ultra High-Speed Impact Problem
Finite Geometrically Similar Element Method for Dynamic Problem of a Cracked Specimen
Evaluation and Characterization of Plastics-Made Sheet Type Components under Impact
Behavior of Thin-Walled Square Tube and Tubular Hat Sections Subjected to Low Velocity Impact Loading
Analysis of the Anti-Bird Impact Performance of Typical Beam-Edge Structure Based on ANSYS/LS-DYNA
Study of Initiator's Shock-Resistibility Through Impact Using Hopkinson Pressure Bar
Creep Problems and Modeling
A Study of Creep Properties of Polymer Bonded Explosives
Analysis of Finite Element Viscoelastic Displacement Based on Kelvin Model
Experimental and Numerical Study of Cyclic Creep of Cast Magnesium Alloy at High Temperature
Numerical Back Inversion Method of Compressive Creep Parameters of Rock Masses under Rigid Bearing Plate and its Application
Shrinkage Cracking Test and Analytical Model for Concrete Considering Creep Behaviour at Early Age
Numerical Simulation of Void Growth Induced Creep Rupture in HAZ at Elevated Temperature
Composite, Ploymer, Ceramics and Metallic Materials
Dynamic Behavior of Tungsten Alloys
Influences of RE-Ti Composite Modification on the Structure and Properties of W6Mo5Cr4V2 Alloy
Influence of Heat Treatment on Structures and Mechanical Properties of Cast Fe-B-C Alloy
Multiaxial Electromechanical Couple Behavior of Ferroelectric Ceramic PZT53
Phase Field Simulation of Rafting Behavior of ?`Phase in Nickel Base Superalloy
Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core
Subsurface Deformation of Worn Al-Cu and Al-Mg Alloys
Microstructure and Grain Abrasion Properties of TiC-xNi Coatings Prepared by Electro-Thermal Explosion Ultra-High Speed Spraying
Growth Characteristic and Fracture Toughness of Laser Rapidly Solidified Al2O3/YAG/ZrO2 Ceramic Eutectic In Situ Composite
Nonlinear Bending of Composite Circular Plates with Embedded Shape Memory Alloy Fibers
Study on Interfacial Shear Stress in RC Beams Strengthened with Prestressed FRP Laminates
Characterization of Expanded Graphite/Flake-Type Graphite Filled Conductive Polymer Composites
Study on Softening Property of 30Cr1Mo1V Steel
Effect of Austenitizing Temperature and Air Cooling Rate on Microstructure and Properties of the Low Carbon Mn-Si-Cr Steel
The Plane Problem Solution of Piezoelectric Material with a Line Crack
Plane Electromechanical Fields in a Piezoelectric Material Containing an Elliptical Hole
Strength Behaviour of Polysilicon Thin Film Flexure Hinge
Microstructures and Mechanical Properties of Natural Fibers
Analytical Solution for the Large Deflection of Fully Clamped Metallic Foam Sandwich Beam
Fracture Toughness of PC and PC/ABS Alloy
3D Numerical Simulation of the Deformation of Glassy Polymer
Static and Dynamic Properties of AC4C Aluminum Alloy
Mechanical Properties of 2-D Lattice Materials
Interface Cracking and Particulate Size Effect in Particle-Reinforced Metal-Matrix Composites
Experimental and Numerical Simulation of the Mechanical Behavior of Stratospheric Balloons Materials
Concrete, Rock and Soil
Jet Projectiles Penetration into Multilayer Metal Targets with Large Interval
Modeling of Stress-Induced Permeability Evolution and Damage of Rock
Model Testing and Analysis Study on Shear Strength of Rock Mass Containing Multiple Cracks under Compression-Shearing Loading
Numerical Simulation of Different-Shaped Random Aggregates' Influence on Concrete's Compression Strength
Effect of Non-Homogeneity on Limit Bearing Capacity of Rock Block
Coupled THM Model and Simulation of the Yucca Mountain and FEBEX Case Study within DECOVALEX-THMC Framework
The Thermo-Hydro Coupled Model of Low-Temperature Rock In Consideration of Phase Change
Concrete Durability Test Due to Environmental Degradation Using Environment Simulation Technology
A Constitutive Model of Anchored Jointed Rock Mass and its Application
Study On the Damage Evolution Equation of Rockburst
Smart Materials and Structures
Effect of Initial Stress on the Behavior of Love Waves in an Elastic Half-Space with a Functionally Graded Layer
Deformation Analysis of Shape Memory Alloy Using SEM Scanning Moire Method
Study of Mechanical Properties of the Spider Silk Using a Micro-Tensile System and DIC Methods
The Moving Crack Problem of Orthotropic Functionally Graded Materials under Antiplane Loading
Study on a New Type of Analogue Material for Geotechnical Tests and its Applications
Nonlinear Stability of Fixed-Fixed FGM Arches Subjected to Mechanical and Thermal Loads
Theoretical Investigation on Horizontally Shear Waves in a Functionally Gradient Piezoelectric Material Plate
The Crack-Tip Higher Order Asymptotic Fields for a Mode III Crack in a Functionally Gradient Material
Plastic Crushing Behavior of Thin-Walled Spheres
Saint-Venant End Effects of Transversely Isotropic Piezoelectric Materials
Computational Methods and Modeling
Multi-Scale Strength Evaluations of SiC Particle Reinforced Aluminum Alloy by Using FEM Superposition Method
Mesh Generation of Revealable and Non-Revealable Multi-Shaped Sub-Domains
Hybrid CAD Modeling Theory and Method in Reverse Engineering
The Tool Position Generating Algorithm of Intersecting Lines Obtained from Section and Equidistance Surface and Curved Surface Processing
A simple Representative Model of the Thoracic Aorta
Nonlinear Numerical Analysis and Shear Resistance of Timber Column and Beam--Adobe Composite Wall with Finite Element Method
Study on the Gear Modeling in SPH Analysis
Numerical Simulation of RSA Seepage Based on Random Structure Model
Investigation on Characteristics of Structure and Simulation Analysis for Dragonfly Wing Vein
A Computational Approach for the Assessment of Seismic Vulnerability Based on the National Data Infrastructure
An Intelligent Modeling Method Based on Genetic Programming and Genetic Algorithm
Computer Modelling For 4-Stroke Direct Injection Diesel Engine
Design of Microstructures and Structures with Negative Linear Compressibility in Certain Directions
Computer Simulation of the Formation of ?-Precipitates in Nickel-Based Superalloys
An Adaptive EFG-FE Computational Model for Thermal Elasto-Plastic Frictional Contact Problems
General Post Processing Program for J-Integral Calculation around Arbitrary Shaped Cracks
Improvement of Unstructured Quadrilateral Mesh Quality for Multigrid Analysis
The Study of Numerical Stability in the SPH Method
A Simple Method in Preventing Numerical Fractures of SPH Computations
The Numerical Simulation of a Bird-Impact on an Aircraft Windshield by Using the SPH Method
An Information-Theoretic Approach for Computational Material Modeling
From Frosen Image-Based Bioflow Simulations to Integrative Modeling of Living Interfaces
Analysis of Stick-Slip Motion by the Rate-Dependent Friction Model
Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials
Numerical Limit Analysis of Two Dimensional Structures by the MLPG Method with Natural Neighbour Interpolation
Computer Simulation of Irradiation Growth in Zirconium
Molecular Dynamics Simulation of Interaction between Screw Dislocation and Copper Precipitate in Iron
Three-Dimensional Crack Propagation Analysis Based on VCCM (Virtual Crack Closure-Integral Method) for Tetrahedral Finite Element
Development of Parallel CAE System for Large Scale Problems Based on Computer Network
Nanomechanics and Nano Structure
Study on the Size Effect of the BaTiO3 Nanowires by LGD Theory
Atomistic Simulations of Nanoindentation on Cu (111) with a Void
Study on Fatigue Crack Nucleation of Electrodeposited Nanocrystalline Nickel
Micro Capacitive Tactile Sensor for Contact Loads
Mechanical Properties of Single-Walled Carbon Nanotubes - A Finite Element Approach
Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics
A Modified Model for Simply Supported Ultrathin Films
Atomistic Simulation of the Energy Barrier for Dislocation Movement in Si
Study of Nanocutting Using Atomic Model
Measurement of Young's Modulus and Poisson's Ratio of Thin Film by Combination of Bulge Test and Nano-Indentation
Effect of Box Microspring Size on Spring Constant
Simulation of Fracture of Nanocrystalline Metals
On the Mechanical Properties of Transversely Isotropic Material Using the Nanoindentation
Effects of Surface and In-Layer van der Waals Interaction on Mechanical Properties for Carbon Nanotubes
Contact and Friction at Nanoscale
Stress Field Near a Nanosized Spheroidal Cavity under Bi-Axial Tension Perpendicular to the Revolution Axis
Biomechanics and Computational Biology
Bone Formation Based on the Turing Model under Compressed Loading Condition
The Experimental Study of Mechanics-Heating Effect to Sand-Therapy in the Uyghur Medicine
Numerical Simulation of Flows in a Pipe with an Aneurismal Sac (Effects of Aneurismal Models and Stents)
Numerical Study on Flow-Adaptive Stents

In Vitro Study on Branch Flows with a Cerebral Aneurysm
Damage and Fracture Behavior of Cancellous Bone in the Femoral Head
Environmental Problems and Fluid Mechanics
Relationship Between Sand Ripple Moving Speed and Wind Speed under Local Wind Tunnel Experiment by Using Natural Sand in Taklimakan Desert
Numerical Modeling for Sand Desert Morphology and Forming Process in Fixed, Semi-Fixed and Free Desert Field
Numerical Simulation of Sand Ripple Formation with Periodically Uniform and Non-Uniform Stream Field
Numerical Simulation of Sand Dune Formation with Periodical Uniform Stream Field
Numerical Simulation of Sand Cover Phenomenon on the Desert Highway Using SPH Method
Flowfield around a Body with Elastic Walls
Flow and Dynamic Characteristics between FPD and Contact-Free Handler Nozzles
One Method of Fluid-Solid Coupled Interaction Simulation
Instability of Heated Panels in Supersonic Air Flow
Meso-Macro Scale Behavior Analysis of Polymeric Systems under their Melting States
Geomechanics,Geomaterials Integrity and Health Monitoring Materials by Design
Kinematical Analysis of Slope Stability Using Triangular Slices Method
Elastic-Plastic Mechanics Analysis on Stability of Coal Pillar
Stability Analysis of Earth Dam under Unsaturated Seepage
Study on Uncertainty and Criterion in Model Optimization of Coupled THM Simulation
Intelligent Monitoring Technique for Working Status of Shenzhen Citizen Center Roof Truss Structure under Wind Load
Investigation of Simplified Integrated Model for Soil-Pile Dynamic Interaction System
Decision-Making Model and Evaluation Architecture for Intelligent Fault Diagnosis
Three-Dimensional Elastoplastic Deformation Analysis Coupled With Oil Flow for Perforation Tunnels of an Oilwell
Dynamics of Materials and Structures: Computations and Experiments
Static and Dynamic Analysis of Wind Turbine Tower Structure
Design and Penetration Performance of Annular Shaped Charge Structure
Acoustic Emission Signals in the Micro-EDM of PCD
Study on Center Hole Deformation Test of Rigid Bearing Plate
Characteristics of Buckling and Ultimate Strength and Collapse Behaviour of Cylindrically Curved Plates Subjected to Axial Compression
Dynamic Characteristics and Mode Selection of High Tower
Analysis and Experiment of Deformation and Limit Load of Thin-Walled Shell Cavities
Taylor Series Numerical Method in Structural Dynamics
Study on Dynamic Characteristics of the 3-Dimensional Parachute-Like Body with Consideration of Virtual Mass
Preliminary Design Analysis of a Hot Gas Duct for the NHDD Program at Korea
Vibrations of Sandwich Panels with Pyramidal Truss Cores
Experimental and Computational Studies of Twin-Vertical-Tail Buffet
Robust Flutter Analysis of an Airfoil with Flap Freeplay Uncertainty
Experimental Investigation of the Deformation Behavior of ABS Resin at Elevated Temperature and High Strain Rate
Vibration Characteristic Prediction of a Heavy Machinery Suspension Seat Using Multi-Body Dynamic Analysis Method
Erosion and Corrosion
Erosion Properties of Molybdenum Coatings Sprayed by Electro-Thermal Explosion Ultra-High Speed Spraying
Study on Erosion-Resistance of Electro-Thermal Explosion Ultra-High Speed Spraying MoSi2-Based Coatings
Erosion Behavior of TiC-xNi Composite Coatings In Situ Synthesized by Electro-Thermal Explosion Ultra-High Speed Spraying
Performance Prediction of Pre-Corroded Aluminum Alloy Using Genetic Algorithm-Neural Network and Fuzzy Neural Network
Non-Destructive Inspection of Rebar Corrosion in Concrete Structures by Using BEM and GA
Nondestructive Corrosion Monitoring in Reinforced Concrete by Boundary Element Inverse Analysis
Effective BEM for Corrosion Analysis of Net Structure
Numerical Simulation of Corrosion under Different Solution Velocity
Thermal Deformation and Thermoelastics
Experimental Analysis and FEM Calculation of the Thermal Deformation for the Spindle System of Machining Center
Study on Rules in Material Removal Rate and Surface Quality of Short Electric Arc Machining Process
Effect of Hot Bar Shape on Temperature Consistency
Package Warpage and Stress Evaluation for a Plastic Electronic Package
Repeatedly Dehiscence and Residual Stress of Liquefied Gas Spherical Vessel
Cyclic Oxidation Behavior of Thermal Barrier Coatings Irradiated by High-Intensity Pulsed Ion Beam
Evaluation of Optimal Conditions for D-Tube Brazing
Phenomenological Mechanism of Transformation Plasticity and the Constitutive Law Coupled with Thermo-Mechanical Plasticity
Research on Hardening the Surface of Laser and Anti-Tempering Property of Cast Steel Hot Roller
Structural Optimization and Design
Structure Optimization of a Locomotive Support Vehicle Based on FEM Analysis
FEM Analysis and Optimization for Welded Metal Bellows Seal
Shape Optimization and Strength Evaluation of Metal Welded Bellows Wave of Mechanical Seal
Computer Aided Calculation of Welding Microstructure and Optimization of Welding Technological Parameters
Analytical Research on FEM and Dynamic Stress Test of Residue Plastic Film Suspension Recycling Machine
FEM Analysis and Optimization Design of a Plastic Film Cutting Machine Tool Rest Structure
Optimal Analysis and Application in the Design of Ultra-Light Truss-Core Structures
A New Global Optimization Algorithm and its Application
Development of the Optimized Manufacturing Process Model by "TAGUCHI METHOD"
Optimal Control of Sandwich Panels with Pyramidal Truss Cores Based on Energy Criterion
Other novel methods of computer modeling in engineering and the sciences
Task Scheduling in Multi-Process with Resource Constraints under MG Workflow
Manufacturing Grid Workflow Framework and Model
The Research of Execute Process and Service Selecting under Manufacturing Grid Workflow
Simulation of Data Management in Group Purchasing System
Six Sigma Robust Design of Composite Hand for LCD Glass Transfer Robot
Study on the Method of Ontological Knowledge Expression of Product Innovative Development and its Application
Stability Analysis of Local Thinned Shallow Spherical Roof of Oil Storage Tank
Structural Feasibility Study on the Slidable One-Touch Extension Fitting for Plastics Pipes with Virtual Assembly and Experiments
Research of Centroid Balance of the Inspection Robot for High-Voltage Transmission Lines
An E-Learning System for CAE
Web Based CAE System and Knowledge Sharing Framework Using Web 2.0 Technologies