Advances in Fracture and Materials Behavior

<ul><li>Committees, Sponsors</li><li>Preface</li><li>Fracture Mechanics and Mechanisms</li><li>Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moire Interferometry</li><li>Effect of Cooling Rate on Strength and Fracture Surfaces of Alpha Brass Casting</li><li>Effects of Distance and Alignment Holes on Fatigue Crack Behaviors of Cast Magnesium Alloys</li><li>Research on the Plastic Work Rate Consumed in the Process Zone for the Growth of Triaxial-Stress-State Crack</li><li>Study on Ductile Fracture Including Shear-Lip Fracture under Mixed Mode Loading Condition</li><li>Fracture Analysis for Damaged Aircraft Fuselage Using Substructure Method</li><li>Experimental Investigation of the Size Effects on the Fracture Toughness and Tearing Modulus</li><li>Torsion Fracture Behavior of Drawn Pearlitic Steel Wires with Different Heat Treatments</li><li>Analysis of Interfacial Debonding of RC Beams Strengthened with CFL</li><li>Fatigue Crack Growth Simulations and Experimental Findings for SEN-Specimens under Different Loadings</li><li>Regular Fracture Control of Pressed Notch Bar under Three-Point Bending</li><li>Fracture Mechanics Analysis on Smart-Cut (R) Technology: Effects of Stiffening Wafer and Defect Interaction </li><li>Examination of the Optimal Local Model Size of Structure with a Surface Crack in the 3-D Local Hybrid Method</li><li>Probabilistic Fracture Mechanics Analysis for Optimization of High-Pressure Vessel Inspection</li><li>Study on the Stress Intensity Factor for Mixed Mode Surface Crack under Three Point Bending</li><li>Different Delamination Cracks during Fracture and Their Influences on the Fracture of X70 Pipeline Steel</li><li>Crack Tip Plasticity By Classic Dislocation Dynamics</li><li>Effective Use of Commercial FEM Software in 2-Dimentional Crack Problems</li><li>Fatigue and Crack Propagation</li><li>Fatigue Analysis for CNG Storage Gas Pressure Vessel Based on ANSYS</li><li>Uniaxial Ratchetting-Fatigue Interaction of Tempered 42CrMo Steel and its Failure Model</li><li>Effect of Size and Location of a Weld Defect on Fatigue Life for Argon-Arc Welded Titanium Alloy Joint</li><li>The Failure Process Analysis on a Numerical Model of a Branching-Out Tunnel under Lateral Overload Action</li><li>Fatigue Crack Growth Simulation Using S-Version FEM</li><li>Stress Classification and Fatigue Life Assessment of Modular Component with Asymmetric Perforated Parts</li><li>
<i>In Situ</i> Observation of Fatigue Crack Growth and 90? Domain Switching for BaTiO₃ Ferroelectric Single Crystal under Cyclic Electric Loading</li><li>Fatigue Life of Multi-Lap Welding of Automotives Steel Sheet by QSTS</li><li>Fatigue Life Evaluation of Spot Weldment Using GA and FEM</li><li>Experimental Study on Fatigue Life of Steel Beams Strengthened with a CFRP Plate</li><li>Experimental Study on the Fatigue Properties of RC Beam Strengthened by Prestressed CFL</li><li>Crack Growth Life Estimating for MSD Panel</li><li>Peculiarity of Accelerated Propagation of Fatigue Crack for Medium Carbon Steel under Variable Amplitude Loading</li><li>Evaluation of Fatigue Crack Growth of Interacting Surface Cracks</li><li>Prediction of the Fatigue Life Based on Stiffness Degradation Concept</li><li>Effect of Load Direction on Crack Propagation in High-Temperature Fatigue of Directionally Solidified Superalloy</li><li>Fatigue Analysis of Locking Parts in the Gauge-Adjustable Wheelsets System Considering the Variation of the Fatigue Strength</li><li>Probabilistic Analysis of Cracked Structures With Uncertainty Parameters</li><li>Fatigue Behaviors of a NiCrAlYSi Coated Directionally Solidified Nickel Base Superalloy </li><li>Strain and Martensitic Phase Distributions around Fatigue Cracks in SUS304 Stainless Steel</li><li>Study of Fretting Fatigue Crack Initiation For Riveted Al 6xxx Components</li><li>Optimization of Integrally Stiffened Panels Based on Crack Propagation Life</li><li>Fatigue Life of Thread Connection for Casing Drilling under Tension and Torsion</li><li>Experimental Study on Fatigue Crack Growth and Residual Strength of Steel 30CrMnSiNi2A under Mixed Corrosive Environments</li><li>Fatigue of Metal Free Reed due to Self-Excited Oscillation</li><li>Characterizing Fatigue Crack Closure by Numerical Analysis</li><li>Damage Tolerance and Fracture Control</li><li>Damage Identification of Multi-Type Joints with Using Electro-Impedance Method by Smart Sensors</li><li>Improved Impedance Method and Guided Wave Technique for Damage Assessment of Beam Structures Using PZT Patches</li><li>Residual Strength Analysis of Stiffened Aluminum Panels with Widespread Fatigue Damage</li><li>Study on the Damage Tolerance of a Stiffened Panel with a Skin Pad</li><li>Interface Failure and Delamination</li><li>Evaluation on Interface Fracture Behavior of HVAS Coating/Substrate System Based on Weibull Stress Criterion</li><li>Subsonic Interface Crack with Crack Face Contact</li><li>Location of Initial Debonding and Stress Singularity at Interface End</li><li>Analysis of the Load-Carrying Capability of the Casing Plug Joint of Steel Tube Structures Considering the Contact Effect</li><li>Interfacial Fracture Analysis of Adhesive-Bonded Joints</li><li>Interaction between a Rigid Cylinder with a Piezoelectric Half-Space with Partial Adhesion</li><li>Peeling Rate Dependency of Delamination Behavior of Adhesives</li><li>Dynamic Fracture and Impact Problem</li><li>Compressive Properties for Alumina Subjected to Shock Loading</li><li>Research on Mode I and Mode II Dynamic Fracture in High Strength Steels under High Loading Rates</li><li>Effect on Dynamic Biaxial Fracture Behaviors by Different Heat Treatments on Magnesium Alloy</li><li>Numerical Solution of Elas-Plastic Impact Load of Tube Column</li><li>Hierarchical Adaptive Mesh for FEM Simulations of Ultra High-Speed Impact Problem</li><li>Finite Geometrically Similar Element Method for Dynamic Problem of a Cracked Specimen</li><li>Evaluation and Characterization of Plastics-Made Sheet Type Components under Impact</li><li>Behavior of Thin-Walled Square Tube and Tubular Hat Sections Subjected to Low Velocity Impact Loading</li><li>Analysis of the Anti-Bird Impact Performance of Typical Beam-Edge Structure Based on ANSYS/LS-DYNA</li><li>Study of Initiator's Shock-Resistibility Through Impact Using Hopkinson Pressure Bar</li><li>Creep Problems and Modeling</li><li>A Study of Creep Properties of Polymer Bonded Explosives</li><li>Analysis of Finite Element Viscoelastic Displacement Based on Kelvin Model</li><li>Experimental and Numerical Study of Cyclic Creep of Cast Magnesium Alloy at High Temperature</li><li>Numerical Back Inversion Method of Compressive Creep Parameters of Rock Masses under Rigid Bearing Plate and its Application</li><li>Shrinkage Cracking Test and Analytical Model for Concrete Considering Creep Behaviour at Early Age</li><li>Numerical Simulation of Void Growth Induced Creep Rupture in HAZ at Elevated Temperature</li><li>Composite, Ploymer, Ceramics and Metallic Materials</li><li>Dynamic Behavior of Tungsten Alloys</li><li>Influences of RE-Ti Composite Modification on the Structure and Properties of W6Mo5Cr4V2 Alloy</li><li>Influence of Heat Treatment on Structures and Mechanical Properties of Cast Fe-B-C Alloy</li><li>Multiaxial Electromechanical Couple Behavior of Ferroelectric Ceramic PZT53</li><li>Phase Field Simulation of Rafting Behavior of ?`Phase in Nickel Base Superalloy</li><li>Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core</li><li>Subsurface Deformation of Worn Al-Cu and Al-Mg Alloys</li><li>Microstructure and Grain Abrasion Properties of TiC-xNi Coatings Prepared by Electro-Thermal Explosion Ultra-High Speed Spraying</li><li>Growth Characteristic and Fracture Toughness of Laser Rapidly Solidified Al₂O₃/YAG/ZrO₂ Ceramic Eutectic <i>In Situ Composite</i></li><li>Nonlinear Bending of Composite Circular Plates with Embedded Shape Memory Alloy Fibers</li><li>Study on Interfacial Shear Stress in RC Beams Strengthened with Prestressed FRP Laminates</li><li>Characterization of Expanded Graphite/Flake-Type Graphite Filled Conductive Polymer Composites</li><li>Study on Softening Property of 30Cr1Mo1V Steel</li><li>Effect of Austenitizing Temperature and Air Cooling Rate on Microstructure and Properties of the Low Carbon Mn-Si-Cr Steel </li><li>The Plane Problem Solution of Piezoelectric Material with a Line Crack</li><li>Plane Electromechanical Fields in a Piezoelectric Material Containing an Elliptical Hole </li><li>Strength Behaviour of Polysilicon Thin Film Flexure Hinge</li><li>Microstructures and Mechanical Properties of Natural Fibers</li><li>Analytical Solution for the Large Deflection of Fully Clamped Metallic Foam Sandwich Beam</li><li>Fracture Toughness of PC and PC/ABS Alloy</li><li>3D Numerical Simulation of the Deformation of Glassy Polymer</li><li>Static and Dynamic Properties of AC4C Aluminum Alloy</li><li>Mechanical Properties of 2-D Lattice Materials</li><li>Interface Cracking and Particulate Size Effect in Particle-Reinforced Metal-Matrix Composites</li><li>Experimental and Numerical Simulation of the Mechanical Behavior of Stratospheric Balloons Materials</li><li>Concrete, Rock and Soil</li><li>Jet Projectiles Penetration into Multilayer Metal Targets with Large Interval</li><li>Modeling of Stress-Induced Permeability Evolution and Damage of Rock</li><li>Model Testing and Analysis Study on Shear Strength of Rock Mass Containing Multiple Cracks under Compression-Shearing Loading</li><li>Numerical Simulation of Different-Shaped Random Aggregates' Influence on Concrete's Compression Strength</li><li>Effect of Non-Homogeneity on Limit Bearing Capacity of Rock Block</li><li>Coupled THM Model and Simulation of the Yucca Mountain and FEBEX Case Study within DECOVALEX-THMC Framework</li><li>The Thermo-Hydro Coupled Model of Low-Temperature Rock In Consideration of Phase Change</li><li>Concrete Durability Test Due to Environmental Degradation Using Environment Simulation Technology</li><li>A Constitutive Model of Anchored Jointed Rock Mass and its Application</li><li>Study On the Damage Evolution Equation of Rockburst</li><li>Smart Materials and Structures</li><li>Effect of Initial Stress on the Behavior of Love Waves in an Elastic Half-Space with a Functionally Graded Layer</li><li>Deformation Analysis of Shape Memory Alloy Using SEM Scanning Moire Method</li><li>Study of Mechanical Properties of the Spider Silk Using a Micro-Tensile System and DIC Methods</li><li>The Moving Crack Problem of Orthotropic Functionally Graded Materials under Antiplane Loading </li><li>Study on a New Type of Analogue Material for Geotechnical Tests and its Applications</li><li>Nonlinear Stability of Fixed-Fixed FGM Arches Subjected to Mechanical and Thermal Loads</li><li>Theoretical Investigation on Horizontally Shear Waves in a Functionally Gradient Piezoelectric Material Plate</li><li>The Crack-Tip Higher Order Asymptotic Fields for a Mode III Crack in a Functionally Gradient Material</li><li>Plastic Crushing Behavior of Thin-Walled Spheres </li><li>Saint-Venant End Effects of Transversely Isotropic Piezoelectric Materials </li><li>Computational Methods and Modeling</li><li>Multi-Scale Strength Evaluations of SiC Particle Reinforced Aluminum Alloy by Using FEM Superposition Method</li><li>Mesh Generation of Revealable and Non-Revealable Multi-Shaped Sub-Domains</li><li>Hybrid CAD Modeling Theory and Method in Reverse Engineering</li><li>The Tool Position Generating Algorithm of Intersecting Lines Obtained from Section and Equidistance Surface and Curved Surface Processing</li><li>A simple Representative Model of the Thoracic Aorta </li><li>Nonlinear Numerical Analysis and Shear Resistance of Timber Column and Beam--Adobe Composite Wall with Finite Element Method </li><li>Study on the Gear Modeling in SPH Analysis</li><li>Numerical Simulation of RSA Seepage Based on Random Structure Model</li><li>Investigation on Characteristics of Structure and Simulation Analysis for Dragonfly Wing Vein</li><li>A Computational Approach for the Assessment of Seismic Vulnerability Based on the National Data Infrastructure</li><li>An Intelligent Modeling Method Based on Genetic Programming and Genetic Algorithm</li><li>Computer Modelling For 4-Stroke Direct Injection Diesel Engine</li><li>Design of Microstructures and Structures with Negative Linear Compressibility in Certain Directions</li><li>Computer Simulation of the Formation of ?-Precipitates in Nickel-Based Superalloys</li><li>An Adaptive EFG-FE Computational Model for Thermal Elasto-Plastic Frictional Contact Problems</li><li>General Post Processing Program for J-Integral Calculation around Arbitrary Shaped Cracks</li><li>Improvement of Unstructured Quadrilateral Mesh Quality for Multigrid Analysis</li><li>The Study of Numerical Stability in the SPH Method</li><li>A Simple Method in Preventing Numerical Fractures of SPH Computations</li><li>The Numerical Simulation of a Bird-Impact on an Aircraft Windshield by Using the SPH Method</li><li>An Information-Theoretic Approach for Computational Material Modeling</li><li>From Frosen Image-Based Bioflow Simulations to Integrative Modeling of Living Interfaces</li><li>Analysis of Stick-Slip Motion by the Rate-Dependent Friction Model</li><li>Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials</li><li>Numerical Limit Analysis of Two Dimensional Structures by the MLPG Method with Natural Neighbour Interpolation</li><li>Computer Simulation of Irradiation Growth in Zirconium</li><li>Molecular Dynamics Simulation of Interaction between Screw Dislocation and Copper Precipitate in Iron</li><li>Three-Dimensional Crack Propagation Analysis Based on VCCM (Virtual Crack Closure-Integral Method) for Tetrahedral Finite Element</li><li>Development of Parallel CAE System for Large Scale Problems Based on Computer Network</li><li>Nanomechanics and Nano Structure</li><li>Study on the Size Effect of the BaTiO₃ Nanowires by LGD Theory</li><li>Atomistic Simulations of Nanoindentation on Cu (111) with a Void </li><li>Study on Fatigue Crack Nucleation of Electrodeposited Nanocrystalline Nickel</li><li>Micro Capacitive Tactile Sensor for Contact Loads</li><li>Mechanical Properties of Single-Walled Carbon Nanotubes - A Finite Element Approach</li><li>Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics</li><li>A Modified Model for Simply Supported Ultrathin Films</li><li>Atomistic Simulation of the Energy Barrier for Dislocation Movement in Si</li><li>Study of Nanocutting Using Atomic Model</li><li>Measurement of Young's Modulus and Poisson's Ratio of Thin Film by Combination of Bulge Test and Nano-Indentation</li><li>Effect of Box Microspring Size on Spring Constant</li><li>Simulation of Fracture of Nanocrystalline Metals</li><li>On the Mechanical Properties of Transversely Isotropic Material Using the Nanoindentation</li><li>Effects of Surface and In-Layer van der Waals Interaction on Mechanical Properties for Carbon Nanotubes</li><li>Contact and Friction at Nanoscale</li><li>Stress Field Near a Nanosized Spheroidal Cavity under Bi-Axial Tension Perpendicular to the Revolution Axis</li><li>Biomechanics and Computational Biology</li><li>Bone Formation Based on the Turing Model under Compressed Loading Condition</li><li>The Experimental Study of Mechanics-Heating Effect to Sand-Therapy in the Uyghur Medicine</li><li>Numerical Simulation of Flows in a Pipe with an Aneurismal Sac (Effects of Aneurismal Models and Stents)</li><li>Numerical Study on Flow-Adaptive Stents</li><li>
<i>In Vitro</i> Study on Branch Flows with a Cerebral Aneurysm</li><li>Damage and Fracture Behavior of Cancellous Bone in the Femoral Head</li><li>Environmental Problems and Fluid Mechanics</li><li>Relationship Between Sand Ripple Moving Speed and Wind Speed under Local Wind Tunnel Experiment by Using Natural Sand in Taklimakan Desert</li><li>Numerical Modeling for Sand Desert Morphology and Forming Process in Fixed, Semi-Fixed and Free Desert Field</li><li>Numerical Simulation of Sand Ripple Formation with Periodically Uniform and Non-Uniform Stream Field</li><li>Numerical Simulation of Sand Dune Formation with Periodical Uniform Stream Field</li><li>Numerical Simulation of Sand Cover Phenomenon on the Desert Highway Using SPH Method</li><li>Flowfield around a Body with Elastic Walls</li><li>Flow and Dynamic Characteristics between FPD and Contact-Free Handler Nozzles</li><li>One Method of Fluid-Solid Coupled Interaction Simulation</li><li>Instability of Heated Panels in Supersonic Air Flow</li><li>Meso-Macro Scale Behavior Analysis of Polymeric Systems under their Melting States</li><li>Geomechanics,Geomaterials Integrity and Health Monitoring Materials by Design</li><li>Kinematical Analysis of Slope Stability Using Triangular Slices Method</li><li>Elastic-Plastic Mechanics Analysis on Stability of Coal Pillar</li><li>Stability Analysis of Earth Dam under Unsaturated Seepage</li><li>Study on Uncertainty and Criterion in Model Optimization of Coupled THM Simulation</li><li>Intelligent Monitoring Technique for Working Status of Shenzhen Citizen Center Roof Truss Structure under Wind Load</li><li>Investigation of Simplified Integrated Model for Soil-Pile Dynamic Interaction System</li><li>Decision-Making Model and Evaluation Architecture for Intelligent Fault Diagnosis</li><li>Three-Dimensional Elastoplastic Deformation Analysis Coupled With Oil Flow for Perforation Tunnels of an Oilwell</li><li>Dynamics of Materials and Structures: Computations and Experiments</li><li>Static and Dynamic Analysis of Wind Turbine Tower Structure</li><li>Design and Penetration Performance of Annular Shaped Charge Structure</li><li>Acoustic Emission Signals in the Micro-EDM of PCD</li><li>Study on Center Hole Deformation Test of Rigid Bearing Plate</li><li>Characteristics of Buckling and Ultimate Strength and Collapse Behaviour of Cylindrically Curved Plates Subjected to Axial Compression</li><li>Dynamic Characteristics and Mode Selection of High Tower</li><li>Analysis and Experiment of Deformation and Limit Load of Thin-Walled Shell Cavities</li><li>Taylor Series Numerical Method in Structural Dynamics</li><li>Study on Dynamic Characteristics of the 3-Dimensional Parachute-Like Body with Consideration of Virtual Mass</li><li>Preliminary Design Analysis of a Hot Gas Duct for the NHDD Program at Korea</li><li>Vibrations of Sandwich Panels with Pyramidal Truss Cores</li><li>Experimental and Computational Studies of Twin-Vertical-Tail Buffet</li><li>Robust Flutter Analysis of an Airfoil with Flap Freeplay Uncertainty</li><li>Experimental Investigation of the Deformation Behavior of ABS Resin at Elevated Temperature and High Strain Rate</li><li>Vibration Characteristic Prediction of a Heavy Machinery Suspension Seat Using Multi-Body Dynamic Analysis Method</li><li>Erosion and Corrosion</li><li>Erosion Properties of Molybdenum Coatings Sprayed by Electro-Thermal Explosion Ultra-High Speed Spraying</li><li>Study on Erosion-Resistance of Electro-Thermal Explosion Ultra-High Speed Spraying MoSi₂-Based Coatings</li><li>Erosion Behavior of TiC-xNi Composite Coatings <i>In Situ </i>Synthesized by Electro-Thermal Explosion Ultra-High Speed Spraying</li><li>Performance Prediction of Pre-Corroded Aluminum Alloy Using Genetic Algorithm-Neural Network and Fuzzy Neural Network</li><li>Non-Destructive Inspection of Rebar Corrosion in Concrete Structures by Using BEM and GA</li><li>Nondestructive Corrosion Monitoring in Reinforced Concrete by Boundary Element Inverse Analysis</li><li>Effective BEM for Corrosion Analysis of Net Structure</li><li>Numerical Simulation of Corrosion under Different Solution Velocity</li><li>Thermal Deformation and Thermoelastics</li><li>Experimental Analysis and FEM Calculation of the Thermal Deformation for the Spindle System of Machining Center</li><li>Study on Rules in Material Removal Rate and Surface Quality of Short Electric Arc Machining Process</li><li>Effect of Hot Bar Shape on Temperature Consistency</li><li>Package Warpage and Stress Evaluation for a Plastic Electronic Package</li><li>Repeatedly Dehiscence and Residual Stress of Liquefied Gas Spherical Vessel</li><li>Cyclic Oxidation Behavior of Thermal Barrier Coatings Irradiated by High-Intensity Pulsed Ion Beam</li><li>Evaluation of Optimal Conditions for D-Tube Brazing </li><li>Phenomenological Mechanism of Transformation Plasticity and the Constitutive Law Coupled with Thermo-Mechanical Plasticity</li><li>Research on Hardening the Surface of Laser and Anti-Tempering Property of Cast Steel Hot Roller</li><li>Structural Optimization and Design</li><li>Structure Optimization of a Locomotive Support Vehicle Based on FEM Analysis</li><li>FEM Analysis and Optimization for Welded Metal Bellows Seal</li><li>Shape Optimization and Strength Evaluation of Metal Welded Bellows Wave of Mechanical Seal</li><li>Computer Aided Calculation of Welding Microstructure and Optimization of Welding Technological Parameters</li><li>Analytical Research on FEM and Dynamic Stress Test of Residue Plastic Film Suspension Recycling Machine</li><li>FEM Analysis and Optimization Design of a Plastic Film Cutting Machine Tool Rest Structure</li><li>Optimal Analysis and Application in the Design of Ultra-Light Truss-Core Structures</li><li>A New Global Optimization Algorithm and its Application</li><li>Development of the Optimized Manufacturing Process Model by "TAGUCHI METHOD" </li><li>Optimal Control of Sandwich Panels with Pyramidal Truss Cores Based on Energy Criterion</li><li>Other novel methods of computer modeling in engineering and the sciences</li><li>Task Scheduling in Multi-Process with Resource Constraints under MG Workflow</li><li>Manufacturing Grid Workflow Framework and Model</li><li>The Research of Execute Process and Service Selecting under Manufacturing Grid Workflow</li><li>Simulation of Data Management in Group Purchasing System</li><li>Six Sigma Robust Design of Composite Hand for LCD Glass Transfer Robot</li><li>Study on the Method of Ontological Knowledge Expression of Product Innovative Development and its Application</li><li>Stability Analysis of Local Thinned Shallow Spherical Roof of Oil Storage Tank</li><li>Structural Feasibility Study on the Slidable One-Touch Extension Fitting for Plastics Pipes with Virtual Assembly and Experiments</li><li>Research of Centroid Balance of the Inspection Robot for High-Voltage Transmission Lines</li><li>An E-Learning System for CAE</li><li>Web Based CAE System and Knowledge Sharing Framework Using Web 2.0 Technologies</li></ul>