High-Performance Ceramics IX

Chapter 1: Technologies of Processing and Manufacturing
Synthesis and Characterization of MoO2 Nanoplates Prepared by Thermal Evaporation of MoO3 and S Powders
Reaction Sintering of Transparent Aluminum Oxynitride (AlON) Ceramics Using MgO and Y2O3 as Co-Additives
Effects of Seeding with Nanocrystallites and Addition of Inorganic Alumina Sol on Crystallization of Alkoxide Alumina Gel
Preparation and Characteristics of Nanocrystalline Yttria by Microwave-Induced Solution Combustion Method
Preparation of High-Purity Magnesium Aluminate Spinel Powder by Thermal Decomposition Method
Preparation of Amorphous SiOC Ceramic Powders through Precursor Polymer Pyrolysis
Preparation of Zirconium Diboride Nanopowders Using Different Zirconium Sources via Sol-Gel Method
Preparation of ZrB2 Powders with Different Morphologies by Pressureless Reactions
Preparation of Zirconium Diboride Powder by Carbon Thermal Reduction Method
Synthesis of Ultra-Fine Zirconium Diboride Powders by Polymer Template Method Following by Microwave Sintering
Preparation and Characterization of Ultra-Fine ZrB2 Powders from Inorganic-Organic Hybrid Precursors via Carbothermal Reduction
Preparation of TiB2 Ultrafine Powders by Carbothermal Reduction
Synthesis and Characterization of Asparagine-Modified and Terbium-Doped Spherical Hydroxyapatite Nanoparticle
Preparation of ?-CD-HAP Composite Microspheres
Improvement of SrAl2O4:Eu2+, Dy3+ Phosphor via AlN Incorporation
Microwave Assisted Preparation of YAG and Yb:YAG Transparent Ceramic Nanopowders for Laser Crystal
Syntheses and Characterizations of New Eu-Ce Codoped LaSrSiO3N Phosphors for LEDs
BiFeO3 Powders Synthesized by Different Sol-Gel Methods
Preparation and Microstructure of (La0.5Sm0.5)2(Zr0.7Ce0.3)2O7Ceramics Prepared by Chemical Coprecipitation Method
Magnetocaloric Properties of Perovskite-Type Manganite La0.65Sr0.2Na0.15MnO3
La-Doped Nanometer TiO2 Powders Prepared by Sol-Gel Method
Preparation Uniform of TiO2 Microporous Ceramic Membrane Supported by Al2O3
Phase Evolution and Surface Morphology of Niobate Hydrate Template Nanoparticles Synthesized by Hydrothermal Method
Hydrothermal Synthesis of Bi4Ti3O12/TiO2 Composite
A Novel Method for Preparing Calcium Carbonate Particles: Thermal Decomposition from Calcium Hydrogen Carbonate Solution
Study on the Pore Structure of Forsterite Insulating Material
Control of the Spring Back in Rice Husk by Al2O3 Sol
Cellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying Method
Pore Forming Mechanism of Forsterite Insulation Materials Synthesized by Molten Salt Method
Study on the Gel Casting Process of Silicon Carbide
Bacterial Cellulose Aerogels Skeleton Strengthened by Regenerated Cellulose
Polysilane as SiC Precursor: Preparation, Catalytic Cure and Pyrolysis
Zirconyldichloride Modified Polycarbosilazane as Precursors for SiZrCNO Ceramics
Preparation of Camphene Carbon/Silicon Carbide Slurry for 3D Printing
Preparation of Ti2AlN Porous Ceramics by Organic Foam Impregnation Process
Fabrication and Properties of Porous Carbon Preforms for Making Reaction Formed SiC
Densification Behaviors in the Early Stage of Spark Plasma Sintering of 3Y-TZP Nanoceramics
Effect of Sintering Aids on the Properties of Porous YAG Ceramics
Effects of Particle Size on Densification Behavior of Si3N4 Ceramics
Effect of Sintering Pressure on Mechanical Properties of BN-Si3N4 Ceramic Composites Prepared by Spark Plasma Sintering
The Influence of Al2O3 and TiO2 Additions on the Sintering Behavior of Partial Reaction Bonding Silicon Nitride
Sintering of High Quality Titanium-Doped Zinc Oxide Ceramic Sputtering Target
Influence of Hot Pressing Process on the Properties of Cf/SiO2 Composites
Fabrication and Properties of W-SiCP/Cu Composites by Hot Pressing Sintering
Effect of Buried Powder Sintering on the Electrical and Piezoelectric Properties of CuO-Modified (Li,K,Na)(Nb,Sb)O3 Lead-Free Piezoceramics
Chapter 2: Ceramics for Functional Applications
Preparation and Characterization of Bi2Ti2O7 Microwave Dielectric Ceramics by Citrate Sol-Gel Method
Evidence of Normal to Anti Ferroelectric Phase Transition of PLZT Transparent Ceramics of Different Zr/Ti Ratio
Using Ferroelectric Thin Film as the Dielectric for Electrowetting-on-Dielectric
Dielectric Breakdown and Failure of Ferroelectric Films as the Dielectric for Electrowetting Systems
The Electrical Properties of Epitaxial Grown Sc-Doped (Na0.85K0.15)0.5Bi0.5TiO3 Thin Film Prepared by Sol-Gel Method
Influence of (Bi0.5M0.5)TiO3 (M=Li, Na, K, Rb) Addition on the Curie Temperature and PTC Effect of BaTiO3-Based Ceramics
Effect of Defect Characteristics on the Color of BaTiO3-Based PTC Ceramic
Electrode Interface Polarization in BaTiO3-Based PTC Ceramics
Densification Behavior and Dielectric Properties of CaO-B2O3-SiO2 System Glass-Ceramics Containing ZrO2
Phase Evolution and Properties of Li2O-Al2O3-SiO2-Based Glass-Ceramic for LTCC Applications
Influence of CeO2-Doping on the Electrical Properties of ZnO-Bi2O3-Based Varistor Ceramics
Preparation and Resistivity of Zirconia Oxygen Sensor Probe
Performance of (Y2O3,V2O5) Co-Doping TiO2 Ceramics
V2O5-WO3/TiO2 Catalysts for Low Temperature NH3 SCR: Catalytic Activity and Characterization
Influences of Preparation Parameters of Catalyst Support on the SCR Denitration Activity of Mn-Ce/TiO2
Photocatalytic Properties of WO3 Particles with Different Grain Sizes
Effects of Eu and Ca Co-Substitution for the Improvement of Multiferroic Properties of BiFeO3
Preparation and Mechanical Properties of BiFeO3 Ceramics
Hardness and Electromagnetic Properties of YSZ/NiZn Ferrite Composites
SiO2-Coated Fe-Ni Alloy Core-Shell Structures Synthesized by a Facile Chemical Method
Preparation and Magnetic Properties of Fe80Co20, Fe80Pt20 and Fe80Co20/Fe80Pt20 Bilayer Films
The Role of Aluminium Source (Al2O3/AlN) in the Synthesis of the Ca-?-SiAlON:Eu2+ Phosphor
Synthesis and Up-Conversion Luminescent Properties of Na(Y1.5Na0.5)F6 Hexagonal Prism
Phase and Morphology Evolution of Manganese Oxides during Thermal Treatment
Electrical Properties of Y0.06Sr0.94Ti0.6Fe0.4O3-?-YSZ Composites as Electrode Materials
Chapter 3: Ceramics for Structural Applications
Preparation and Performance of Monazite Coating on Woven Alumina Ceramic Cloths
Effect of Al Powder Content on Performance of MgO-Al2O3 Composite at 1700 degreesC under N2 Atmosphere
Effect of the Addition of Al Power on the Microstructure and Phase Constitution of Al2O3-MgO Composites Sintered at 1700 degreesC under N2 Atmosphere
Effect of the Addition of Al Powder on the Microstructure and Phase Constitution of Magnesia-Spinel Composites Sintered at 1800 degreesC in N2
Preparation and Characterization of Al-Al2O3 Metal Ceramics via Powder Metallurgy Methods
Microstructure and Mechanical Properties of Multiscale Zirconia Ceramics Prepared by Field Assisted Sintering Technique
Preparation and Characterization of Mullite Fiber-Reinforced Al2O3-SiO2 Aerogel Composites
Preparation of Small Size Ceria Stabilized Zirconia Microspheres by External Gelation: Effect of Vibration Frequency
The Effect of Aging Temperature and pH Value of Aging Solution on the Microstructure of ZrO2-SiO2 Aerogels
Preparation and Characterization of Al2O3/ZrO2 Composite Ceramics
Thermal Insulation Property of Nanostructured Alumina Coated Zirconia Thermal Barrier Coating
Effect of the Cooling Ways on the Properties and Microstructure of ZrO2/ZrW2O8 Ceramic Composites
Influence of Temperature on the Order-Disorder Transition in Gd2Zr2O7
Synthesis and Characterization of LaMgAl11O19 as Thermal Barrier Coatings Material
Effect of h-BN on Sintering Behavior, Microstructures and Mechanical Properties of YAG Bulk Composites
Synthesis and Characterization of Magnesium Aluminate Spinel Porous Ceramics by Novel Molten Salt Method
Preparation and Performance of Neutron Absorbing Dysprosium Oxide Ceramic
Characterization of SiO2 Aerogel/SiO2 Fiber Composites Prepared by Sol-Gel Method
Mechanically Strong and Hierarchical Porous Silica Ceramics via Gelcasting-Lyophilization
Preparation and Properties of Acupuncture Quartz Fiber Reinforced Quartz-Based Composites
Effect of Preparation Technology on Properties of Quartz Pore Gradient Materials Using Low-Grade Quartz Sand
Preparation and Properties of Phenolic Resin Impregnated Quartz Fiber Tile Ablative Composite
Performance of Nano-Silica Insulation Material Enhanced by High Humidity-Reinforcement Method
Effects of Concentrations of NaCl on the Sintering and Thermal Conductivity of Forsterite
The Effect of Particle Size of Expandable Graphite on the Properties of an Expandable Thermal Insulation Material
Effect of Moisture Absorption on High Temperature Thermal Insulation Performance of Fiber Insulation Materials
Optimized Design of Multilayer Thermal Insulations for Hypersonic Vehicles
Effect of Binders on Preparation of High Temperature Rigid Thermal Insulation Materials
Influence of Sintering Aids on the Sintering and Conductivity Properties of Si3N4 Composites
Preparation and Properties of Si3N4-SiC Radar Wave-Absorbing Nanocomposites
Preparation of Sialon/Si3N4-SiC Composite Refractories Using Kyanite Tailings
Study on the Cause and Control of Defects on Process of CVD SiC
Fabrication of Mullite Coating and its Oxidation Protection for Carbon Fiber Reinforced SiC Composites
Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic
Effect of Additives on Bond Property for Phenolic Resin-Based Adhesive
Preparation and Properties of SiC/Si-B-C-N Ceramic Composites
Preparation of B4C-ZrB2 Laminated Composites by Non-Aqueous Tape Casting and Hot-Press Sintering
Structural-Functional Integrative Mullitef/SiBN Composites with Excellent Wave-Transparent and Mechanical Properties
Effects of Viscosity and Pressure on Microstructure and Properties of Cf/SiC-ZrB2 Composites by PIP Process
Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering
Microstructures and Mechanical Properties of ?-Sialon-cBN Composites
High Pressure and High Temperature Sintered PcBN Using Al, B4C and C as Sintering Additive
Influence of SiC on the Properties of PcBN Cutting Tools Fabricated by High Pressure and High Temperature Sintering
Effect of Al and Si Additions on the Synthesis of Spark Plasma Sintered Zr2Al4C5 Creamic
Microstructure and Ablation Property of TaC-SiC Composite Coatings
Preparation and Properties of TiB2-SiC-Si Composites Fabricated by Reaction Bonding
Preparation and Properties of High-Purity Porous Calcium Hexaluminate Material
Gel Casting and Properties of SiCp/Al Composite
Wetting and Interfacial Behaviors of Molten Ag, Cu and Ag-28Cu on WC-8Co Cemented Carbide
Preparation of Glass-Ceramics by Reactive Crystallization with Waste Glass and Mullite
Phase Equilibria in the BaO-SiO2-Al2O3 Ternary System at 1500 degreesC
Nitridation Isothermal Kinetics of In Situ ?-Sialon Bonded Al2O3-C Refractories
Effects of Al Content on the Phase Constitution of Aluminum-Periclase Composites at 1600 degreesC in N2
Effect of Spinel Content on the Reaction of Porous Periclase-Spinel Ceramics and Cement Clinker
Influence of Contents of Pre-Synthesized Spinel on the Microstructures and Mechanical Properties of the Lightweight Corundum-Spinel Refractory Castables
Effect of Sintering Temperature on the Physical Properties and Microstructure of In Situ Nitrides Bonded MgAl2O4-C Refractories
Effect of Particle Size Distribution of Raw Materials on Properties of Magnesia-Alumina Refractory
Preparation and Properties of Lightweight, High-Strength Insulation Materials Using Fly Ash Floating Beads
Effect of Zircon Content on the Microstructure and Physical Properties of Chamotte Refractories
Effects of Short PAN Fiber Contents on Mechanical Properties of Metakaolin-Blast Furnace Slag Based Geopolymers
Influence of Voltage on the Biological Performance of Micro-Arc Oxide Films Based on TC4 Titanium Alloy
Influence of Voltage on Microstructure of Micro-Arc Oxide Films on TC4 Titanium Alloy
Effect of Thermal Oxidation Temperature on the Properties of Micro-Arc Oxidation Ceramic Coating on TC4 Alloy
Chapter 4: Mechanical Properties of Ceramic Materials
The Effect of Thickness on the Fracture Strength and Failure Modes of Zirconia Crowns
Effects of Sintering Temperature and Excess Zr on Mechanical Properties of Reactive Hot-Pressed ZrB2-ZrCx-Zr Cermets
Mechanical Properties and Microstructure of 2.5D Cf/ZrO2 Composites Prepared by Precursor Infiltration and Pyrolysis
Effects of Si3N4 Additions on Creep Resistance of Al-Al2O3 Composites
Mechanical Properties of Polymer-Infiltrated-Feldspar for Restorative Composite CAD/CAM Blocks
Analysis on Low Cycle Fatigue Life and Fatigue Fracture Surface Morphology of TC25 Titanium Alloy
Analysis on High Cycle Fatigue Properties and Fatigue Damage Evolution of TC25 Titanium Alloy
Research on Transition from Short to Long Fatigue Crack Propagation of GH4133B Superalloy Used in Turbine Disk of Aero-Engine
Thermal Property of Cu/Ti3SiC2 FGM
ZrO2 Ceramic CompositeAdded with MgAl2O4: Thermal Shock Resistance and Corrosion Resistance in Molten Uranium
The Oxidation Resistance of ZrB2-SiC Composites Fabricated by High Pressure and High Temperature Sintering
Ablation Behavior of Low Pressure Plasma Sprayed TiB2-MoSi2 Composite Coatings
Chapter 5: Emerging Inorganic Non-Metallic Materials
Synthesis of Carbon Nanotubes from Phenolic Resin Using Nickel Nitrate as a Catalyst Precursor
Effects of Solvent on the Optical Nonlinearities of Multi-Walled Carbon Nanotubes under the Picosecond Laser Pulses
Preparation and Characterization of ZrO2 Nanofibers and Nanobelts by Electrospinning
Preparation and Characterization of Vanadium Pentoxide Hollow Microspheres with Tunable Sizes
Synthesis of V6O13 Flowers-Like with Control pH for Li-Ion Battery Cathodes
Synthesis and Antibacterial Activities of Ag/ZnO Nanoparticles
Effects of Annealing Temperature and Coating Layers on Properties of ZnO Thin Films Prepared by Sol-Gel Immerse Technique
Composition, Structure and Electrical Resistivity of ZnO1-x Films Deposited by RF Magnetron Sputtering under Various O2/Ar Gas Ratios
A Single-Phase Full-Color Ca4Si2O7F2:Ce3+, Tb3+, Sm3+ Micron Belt Mat for White-Light Emitting Diode Application
Liquid Phase Deposited TiO2 Films on Stainless Steel Mesh for Corrosion Resistance Application
A Metastable Ion (III) Oxide Phase (?-Fe2O3): Preparation and Gas Sensing Properties
Influence of Addition of Fe2O3 and CaO on the Performance of Manual SHS Welding Slag
Photocatalytic Behaviors Observed in Microstructured PbS under Visible Light
Immobilization of Laccase in Glycidoxypropyl-Functionalized Magnetic Mesoporous SiO2/Fe3O4 Hollow Microspheres
Control of Preferential Orientation of La1-xSrxMnO3 Thin Films by Pulsed Laser Deposition
Study on Zeolite X Complexing Dimethyl Potassium
Research Progress of Adsorption on Heavy Metals from Aqueous Solutions by Modified Diatomite
Formation Mechanisms of the Point Defects from the 4H-SiC (0001) Surface to the Interior Layers: First Principle Calculation
Effect of Bias Voltage on Microstructure and Mechanical Properties of CrN Coatings Prepared by Single Target Magnetron Sputtering
Dual-Functional Phase Change Nanocapsules Based on n-Octadecane Core and Polypyrrole Shell
Influence of Pre-Oxidation on the Morphology of Mesocarbon Microbeads
Coalescence of the Fullerenes in SWNT with Bend Junction
Chapter 6: Ceramics for Next Generation Nuclear Power
Principle Design of Graphite Components for HTTR and R&D on Nuclear Graphite for HTGR in JAEA
Sintering of SiC Coating Layer on Graphite Spheres Prepared by Pack Cementation
Preparation of Li4SiO4 Ceramic Pebbles by Agar Method Using Li2SiO3 and Li2CO3 as Raw Materials
Preparation and Characterization of Lithium Orthosilicate Ceramic Pebbles by Melt Spraying Method
Characterization of the Tracer YSZ/CoO Microspheres with YSZ Ceramic Coating for HTR Fuel Element
Processing and Thermal Properties of Multiwall Carbon Nanotube/Bismuth Antimony Telluride Composites for Nuclear Energy Applications
Preparation of UCO Microspheres by Internal Gelation Process
Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide as Coating Layers
Preparation of Silicon Carbide Nanowires and Nanochains Using Chemical Vapor Deposition Method
Preparation of Silicon Carbide Coating Layer by Fluidized Bed Chemical Vapor Deposition Using a Halogen-Free Precursor
Effect of PyC Thermal Behavior on the Stress of TRISO-Coated Fuel Particles