High-Performance Ceramics IX

Synthesis and Characterization of MoO2 Nanoplates Prepared by Thermal Evaporation of MoO3 and S PowdersReaction Sintering of Transparent Aluminum Oxynitride (AlON) Ceramics Using MgO and Y2O3 as Co-AdditivesEffects of Seeding with Nanocrystallites and Addition of Inorganic Alumina Sol on Crystallization of Alkoxide Alumina GelPreparation and Characteristics of Nanocrystalline Yttria by Microwave-Induced Solution Combustion MethodPreparation of High-Purity Magnesium Aluminate Spinel Powder by Thermal Decomposition MethodPreparation of Amorphous SiOC Ceramic Powders through Precursor Polymer PyrolysisPreparation of Zirconium Diboride Nanopowders Using Different Zirconium Sources via Sol-Gel MethodPreparation of ZrB2 Powders with Different Morphologies by Pressureless ReactionsPreparation of Zirconium Diboride Powder by Carbon Thermal Reduction MethodSynthesis of Ultra-Fine Zirconium Diboride Powders by Polymer Template Method Following by Microwave SinteringPreparation and Characterization of Ultra-Fine ZrB2 Powders from Inorganic-Organic Hybrid Precursors via Carbothermal ReductionPreparation of TiB2 Ultrafine Powders by Carbothermal ReductionSynthesis and Characterization of Asparagine-Modified and Terbium-Doped Spherical Hydroxyapatite NanoparticlePreparation of ?-CD-HAP Composite MicrospheresImprovement of SrAl2O4:Eu2+, Dy3+ Phosphor via AlN IncorporationMicrowave Assisted Preparation of YAG and Yb:YAG Transparent Ceramic Nanopowders for Laser CrystalSyntheses and Characterizations of New Eu-Ce Codoped LaSrSiO3N Phosphors for LEDsBiFeO3 Powders Synthesized by Different Sol-Gel MethodsPreparation and Microstructure of (La0.5Sm0.5)2(Zr0.7Ce0.3)2O7Ceramics Prepared by Chemical Coprecipitation MethodMagnetocaloric Properties of Perovskite-Type Manganite La0.65Sr0.2Na0.15MnO3La-Doped Nanometer TiO2 Powders Prepared by Sol-Gel MethodPreparation Uniform of TiO2 Microporous Ceramic Membrane Supported by Al2O3Phase Evolution and Surface Morphology of Niobate Hydrate Template Nanoparticles Synthesized by Hydrothermal MethodHydrothermal Synthesis of Bi4Ti3O12/TiO2 CompositeA Novel Method for Preparing Calcium Carbonate Particles: Thermal Decomposition from Calcium Hydrogen Carbonate SolutionStudy on the Pore Structure of Forsterite Insulating MaterialControl of the Spring Back in Rice Husk by Al2O3 SolCellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying MethodPore Forming Mechanism of Forsterite Insulation Materials Synthesized by Molten Salt MethodStudy on the Gel Casting Process of Silicon CarbideBacterial Cellulose Aerogels Skeleton Strengthened by Regenerated CellulosePolysilane as SiC Precursor: Preparation, Catalytic Cure and PyrolysisZirconyldichloride Modified Polycarbosilazane as Precursors for SiZrCNO CeramicsPreparation of Camphene Carbon/Silicon Carbide Slurry for 3D PrintingPreparation of Ti2AlN Porous Ceramics by Organic Foam Impregnation ProcessFabrication and Properties of Porous Carbon Preforms for Making Reaction Formed SiCDensification Behaviors in the Early Stage of Spark Plasma Sintering of 3Y-TZP NanoceramicsEffect of Sintering Aids on the Properties of Porous YAG CeramicsEffects of Particle Size on Densification Behavior of Si3N4 CeramicsEffect of Sintering Pressure on Mechanical Properties of BN-Si3N4 Ceramic Composites Prepared by Spark Plasma SinteringThe Influence of Al2O3 and TiO2 Additions on the Sintering Behavior of Partial Reaction Bonding Silicon NitrideSintering of High Quality Titanium-Doped Zinc Oxide Ceramic Sputtering TargetInfluence of Hot Pressing Process on the Properties of Cf/SiO2 CompositesFabrication and Properties of W-SiCP/Cu Composites by Hot Pressing SinteringEffect of Buried Powder Sintering on the Electrical and Piezoelectric Properties of CuO-Modified (Li,K,Na)(Nb,Sb)O3 Lead-Free PiezoceramicsPreparation and Characterization of Bi2Ti2O7 Microwave Dielectric Ceramics by Citrate Sol-Gel MethodEvidence of Normal to Anti Ferroelectric Phase Transition of PLZT Transparent Ceramics of Different Zr/Ti RatioUsing Ferroelectric Thin Film as the Dielectric for Electrowetting-on-DielectricDielectric Breakdown and Failure of Ferroelectric Films as the Dielectric for Electrowetting SystemsThe Electrical Properties of Epitaxial Grown Sc-Doped (Na0.85K0.15)0.5Bi0.5TiO3 Thin Film Prepared by Sol-Gel MethodInfluence of (Bi0.5M0.5)TiO3 (M=Li, Na, K, Rb) Addition on the Curie Temperature and PTC Effect of BaTiO3-Based CeramicsEffect of Defect Characteristics on the Color of BaTiO3-Based PTC CeramicElectrode Interface Polarization in BaTiO3-Based PTC CeramicsDensification Behavior and Dielectric Properties of CaO-B2O3-SiO2 System Glass-Ceramics Containing ZrO2Phase Evolution and Properties of Li2O-Al2O3-SiO2-Based Glass-Ceramic for LTCC ApplicationsInfluence of CeO2-Doping on the Electrical Properties of ZnO-Bi2O3-Based Varistor CeramicsPreparation and Resistivity of Zirconia Oxygen Sensor ProbePerformance of (Y2O3,V2O5) Co-Doping TiO2 CeramicsV2O5-WO3/TiO2 Catalysts for Low Temperature NH3 SCR: Catalytic Activity and CharacterizationInfluences of Preparation Parameters of Catalyst Support on the SCR Denitration Activity of Mn-Ce/TiO2Photocatalytic Properties of WO3 Particles with Different Grain SizesEffects of Eu and Ca Co-Substitution for the Improvement of Multiferroic Properties of BiFeO3Preparation and Mechanical Properties of BiFeO3 CeramicsHardness and Electromagnetic Properties of YSZ/NiZn Ferrite CompositesSiO2-Coated Fe-Ni Alloy Core?Shell Structures Synthesized by a Facile Chemical MethodPreparation and Magnetic Properties of Fe80Co20, Fe80Pt20 and Fe80Co20/Fe80Pt20 Bilayer FilmsThe Role of Aluminium Source (Al2O3/AlN) in the Synthesis of the Ca-a-SiAlON:Eu2+ PhosphorSynthesis and Up-Conversion Luminescent Properties of Na(Y1.5Na0.5)F6 Hexagonal PrismPhase and Morphology Evolution of Manganese Oxides during Thermal TreatmentElectrical Properties of Y0.06Sr0.94Ti0.6Fe0.4O3-d-YSZ Composites as Electrode MaterialsPreparation and Performance of Monazite Coating on Woven Alumina Ceramic ClothsEffect of Al Powder Content on Performance of MgO-Al2O3 Composite at 1700?C under N2 AtmosphereEffect of the Addition of Al Power on the Microstructure and Phase Constitution of Al2O3-MgO Composites Sintered at 1700?C under N2 AtmosphereEffect of the Addition of Al Powder on the Microstructure and Phase Constitution of Magnesia-Spinel Composites Sintered at 1800?C in N2Preparation and Characterization of Al-Al2O3 Metal Ceramics via Powder Metallurgy MethodsMicrostructure and Mechanical Properties of Multiscale Zirconia Ceramics Prepared by Field Assisted Sintering TechniquePreparation and Characterization of Mullite Fiber-Reinforced Al2O3-SiO2 Aerogel CompositesPreparation of Small Size Ceria Stabilized Zirconia Microspheres by External Gelation: Effect of Vibration FrequencyThe Effect of Aging Temperature and pH Value of Aging Solution on the Microstructure of ZrO2-SiO2 AerogelsPreparation and Characterization of Al2O3/ZrO2 Composite CeramicsThermal Insulation Property of Nanostructured Alumina Coated Zirconia Thermal Barrier CoatingEffect of the Cooling Ways on the Properties and Microstructure of ZrO2/ZrW2O8 Ceramic CompositesInfluence of Temperature on the Order-Disorder Transition in Gd2Zr2O7Synthesis and Characterization of LaMgAl11O19 as Thermal Barrier Coatings MaterialEffect of h-BN on Sintering Behavior, Microstructures and Mechanical Properties of YAG Bulk CompositesSynthesis and Characterization of Magnesium Aluminate Spinel Porous Ceramics by Novel Molten Salt MethodPreparation and Performance of Neutron Absorbing Dysprosium Oxide CeramicCharacterization of SiO2 Aerogel/SiO2 Fiber Composites Prepared by Sol-Gel MethodMechanically Strong and Hierarchical Porous Silica Ceramics via Gelcasting-LyophilizationPreparation and Properties of Acupuncture Quartz Fiber Reinforced Quartz-Based CompositesEffect of Preparation Technology on Properties of Quartz Pore Gradient Materials Using Low-Grade Quartz SandPreparation and Properties of Phenolic Resin Impregnated Quartz Fiber Tile Ablative CompositePerformance of Nano-Silica Insulation Material Enhanced by High Humidity-Reinforcement MethodEffects of Concentrations of NaCl on the Sintering and Thermal Conductivity of ForsteriteThe Effect of Particle Size of Expandable Graphite on the Properties of an Expandable Thermal Insulation MaterialEffect of Moisture Absorption on High Temperature Thermal Insulation Performance of Fiber Insulation MaterialsOptimized Design of Multilayer Thermal Insulations for Hypersonic VehiclesEffect of Binders on Preparation of High Temperature Rigid Thermal Insulation MaterialsInfluence of Sintering Aids on the Sintering and Conductivity Properties of Si3N4 CompositesPreparation and Properties of Si3N4-SiC Radar Wave-Absorbing NanocompositesPreparation of Sialon/Si3N4-SiC Composite Refractories Using Kyanite TailingsStudy on the Cause and Control of Defects on Process of CVD SiCFabrication of Mullite Coating and its Oxidation Protection for Carbon Fiber Reinforced SiC CompositesWetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC CeramicEffect of Additives on Bond Property for Phenolic Resin-Based AdhesivePreparation and Properties of SiC/Si-B-C-N Ceramic CompositesPreparation of B4C-ZrB2 Laminated Composites by Non-Aqueous Tape Casting and Hot-Press SinteringStructural-Functional Integrative Mullitef/SiBN Composites with Excellent Wave-Transparent and Mechanical PropertiesEffects of Viscosity and Pressure on Microstructure and Properties of Cf/SiC-ZrB2 Composites by PIP ProcessMicrostructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive SinteringMicrostructures and Mechanical Properties of ?-Sialon-cBN CompositesHigh Pressure and High Temperature Sintered PcBN Using Al, B4C and C as Sintering AdditiveInfluence of SiC on the Properties of PcBN Cutting Tools Fabricated by High Pressure and High Temperature SinteringEffect of Al and Si Additions on the Synthesis of Spark Plasma Sintered Zr2Al4C5 CreamicMicrostructure and Ablation Property of TaC-SiC Composite CoatingsPreparation and Properties of TiB2-SiC-Si Composites Fabricated by Reaction BondingPreparation and Properties of High-Purity Porous Calcium Hexaluminate MaterialGel Casting and Properties of SiCp/Al CompositeWetting and Interfacial Behaviors of Molten Ag, Cu and Ag-28Cu on WC-8Co Cemented CarbidePreparation of Glass-Ceramics by Reactive Crystallization with Waste Glass and MullitePhase Equilibria in the BaO-SiO2-Al2O3 Ternary System at 1500 ?CNitridation Isothermal Kinetics of In Situ ?-Sialon Bonded Al2O3-C RefractoriesEffects of Al Content on the Phase Constitution of Aluminum-Periclase Composites at 1600?C in N2Effect of Spinel Content on the Reaction of Porous Periclase-Spinel Ceramics and Cement ClinkerInfluence of Contents of Pre-Synthesized Spinel on the Microstructures and Mechanical Properties of the Lightweight Corundum-Spinel Refractory CastablesEffect of Sintering Temperature on the Physical Properties and Microstructure of In Situ Nitrides Bonded MgAl2O4-C RefractoriesEffect of Particle Size Distribution of Raw Materials on Properties of Magnesia-Alumina RefractoryPreparation and Properties of Lightweight, High-Strength Insulation Materials Using Fly Ash Floating BeadsEffect of Zircon Content on the Microstructure and Physical Properties of Chamotte RefractoriesEffects of Short PAN Fiber Contents on Mechanical Properties of Metakaolin-Blast Furnace Slag Based GeopolymersInfluence of Voltage on the Biological Performance of Micro-Arc Oxide Films Based on TC4 Titanium AlloyInfluence of Voltage on Microstructure of Micro-Arc Oxide Films on TC4 Titanium AlloyEffect of Thermal Oxidation Temperature on the Properties of Micro-Arc Oxidation Ceramic Coating on TC4 AlloyThe Effect of Thickness on the Fracture Strength and Failure Modes of Zirconia CrownsEffects of Sintering Temperature and Excess Zr on Mechanical Properties of Reactive Hot-Pressed ZrB2-ZrCx-Zr CermetsMechanical Properties and Microstructure of 2.5D Cf/ZrO2 Composites Prepared by Precursor Infiltration and PyrolysisEffects of Si3N4 Additions on Creep Resistance of Al-Al2O3 CompositesMechanical Properties of Polymer-Infiltrated-Feldspar for Restorative Composite CAD/CAM BlocksAnalysis on Low Cycle Fatigue Life and Fatigue Fracture Surface Morphology of TC25 Titanium AlloyAnalysis on High Cycle Fatigue Properties and Fatigue Damage Evolution of TC25 Titanium AlloyResearch on Transition from Short to Long Fatigue Crack Propagation of GH4133B Superalloy Used in Turbine Disk of Aero-EngineThermal Property of Cu/Ti3SiC2 FGMZrO2 Ceramic CompositeAdded with MgAl2O4: Thermal Shock Resistance and Corrosion Resistance in Molten UraniumThe Oxidation Resistance of ZrB2-SiC Composites Fabricated by High Pressure and High Temperature SinteringAblation Behavior of Low Pressure Plasma Sprayed TiB2-MoSi2 Composite CoatingsSynthesis of Carbon Nanotubes from Phenolic Resin Using Nickel Nitrate as a Catalyst PrecursorEffects of Solvent on the Optical Nonlinearities of Multi-Walled Carbon Nanotubes under the Picosecond Laser PulsesPreparation and Characterization of ZrO2 Nanofibers and Nanobelts by ElectrospinningPreparation and Characterization of Vanadium Pentoxide Hollow Microspheres with Tunable SizesSynthesis of V6O13 Flowers-Like with Control pH for Li-Ion Battery CathodesSynthesis and Antibacterial Activities of Ag/ZnO NanoparticlesEffects of Annealing Temperature and Coating Layers on Properties of ZnO Thin Films Prepared by Sol-Gel Immerse TechniqueComposition, Structure and Electrical Resistivity of ZnO1-x Films Deposited by RF Magnetron Sputtering under Various O2/Ar Gas RatiosA Single-Phase Full-Color Ca4Si2O7F2:Ce3+, Tb3+, Sm3+ Micron Belt Mat for White-Light Emitting Diode ApplicationLiquid Phase Deposited TiO2 Films on Stainless Steel Mesh for Corrosion Resistance ApplicationA Metastable Ion (III) Oxide Phase (e-Fe2O3): Preparation and Gas Sensing PropertiesInfluence of Addition of Fe2O3 and CaO on the Performance of Manual SHS Welding SlagPhotocatalytic Behaviors Observed in Microstructured PbS under Visible LightImmobilization of Laccase in Glycidoxypropyl-Functionalized Magnetic Mesoporous SiO2/Fe3O4 Hollow MicrospheresControl of Preferential Orientation of La1-xSrxMnO3 Thin Films by Pulsed Laser DepositionStudy on Zeolite X Complexing Dimethyl PotassiumResearch Progress of Adsorption on Heavy Metals from Aqueous Solutions by Modified DiatomiteFormation Mechanisms of the Point Defects from the 4H-SiC (0001) Surface to the Interior Layers: First Principle CalculationEffect of Bias Voltage on Microstructure and Mechanical Properties of CrN Coatings Prepared by Single Target Magnetron SputteringDual-Functional Phase Change Nanocapsules Based on n-Octadecane Core and Polypyrrole ShellInfluence of Pre-Oxidation on the Morphology of Mesocarbon MicrobeadsCoalescence of the Fullerenes in SWNT with Bend JunctionPrinciple Design of Graphite Components for HTTR and R&D on Nuclear Graphite for HTGR in JAEASintering of SiC Coating Layer on Graphite Spheres Prepared by Pack CementationPreparation of Li4SiO4 Ceramic Pebbles by Agar Method Using Li2SiO3 and Li2CO3 as Raw MaterialsPreparation and Characterization of Lithium Orthosilicate Ceramic Pebbles by Melt Spraying MethodCharacterization of the Tracer YSZ/CoO Microspheres with YSZ Ceramic Coating for HTR Fuel ElementProcessing and Thermal Properties of Multiwall Carbon Nanotube/Bismuth Antimony Telluride Composites for Nuclear Energy ApplicationsPreparation of UCO Microspheres by Internal Gelation ProcessPreparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide as Coating LayersPreparation of Silicon Carbide Nanowires and Nanochains Using Chemical Vapor Deposition MethodPreparation of Silicon Carbide Coating Layer by Fluidized Bed Chemical Vapor Deposition Using a Halogen-Free PrecursorEffect of PyC Thermal Behavior on the Stress of TRISO-Coated Fuel Particles