The Science of Engineering Ceramics III

Investigation of the Sintering Behavior of Ultrapure ?-Alumina Containing Low Amounts of SiO2 or CaO
Sintering Behavior of Microstructured ?-Alumina with Nanosized ?-Alumina Additive
Control of Shrinkage during Sintering of Alumina Ceramics Based on Master Sintering Curve Theory
Bulk Consolidation of Non-Oxide Ceramic Powders Derived from Polymer Precursors
Centrifugal Sintering
Low-Temperature Sintering of ?- and ?-SiC Powders with AlB2 Additive
Sintering and Characterization of Zr2Al3C5 Monolith
Thermal Evolution of Single Phase Lanthanum Zirconate
Sinterability of Alumina-Dispersed 3Y-TZP
Preparation of Ce-ZrO2 Based Composites and Effect of Addition of 3Y-ZrO2 on Their Microstructures
Grinding of Agglomerate AlN Powder by Wet Milling
Wet Jet Milling of Ceramics Powder
Hydrothermal Preparation and Characterization of Barium Titanate Powders
Fabrication and Characterization of Various Calcium Phosphate Powders by Ultrasonic Spray Pyrolysis Technique
Fabrication and Characteristics of Hypereutectic Prealloyed Al-Si Powders by Gas Atomization Process
Effect of Magnesium Ion on the Precipitation of Hollow Calcium Carbonate by Bubble Templating Method
Effect of Different Salt on Fabrication of Sr0.5Ba0.5Nb2O6 by Molten-Salt Synthesis
Processing and Property Evaluation of Alumina Aerogel Based Ceramic Nanocomposites
Dispersion of ZrO2 Particles in the Al2O3/ZrO2 Ceramics by the Partial Chemical Dispersion Processes
Pre-Combustion CO2 Capture Using Ceramic Absorbent and Methane Steam Reforming
Kumada Rearrangement of Polydimethylsilane Using a Catalytic Process
Effect of Additives on Hydrolysis of Ti Alkoxide and Microstructural Observation of TiO2
Sol-Gel Preparation and Characterizations of Europium-Ion Doped Barium Magnesium Aluminate
Syntheses of Bulky Y-Zeolite by Hydrothermal Hot-Pressing (HHP) Technique
Densification and Strengthening of Tricalcium Phosphate/Titania Composite by Hot Pressing
Preparation of Mullite Composite Using Liquid Infiltration Technique
Liquid-Phase Sintered Silicon Carbide with Aluminum Nitride and Rare-Earth Oxide Additives
Effect of ?-Alumina as a Seed in Alumina/Silicon Carbide Composites
Preparation and Morphology of C/C-SiC Composites by Si Melt Infiltration
Preparation and Properties of Silicon Nitride Ceramics by Nitrided Pressureless Sintering (NPS) Process
Microwave Sintering BaTiO3 Ceramics Using Liquid Phase Sintering
Thermodynamical Calculations and Experimental Confirmation about the Mg-Al-Spinel Reaction Path in the Sol-Gel-Process
Fabrication and Structure of TiO2 Coated Open-Cell Mullite Ceramics
Dispersion of Barium Ferrite Particles for Slip Casting in Magnetic Field
The Vibrative Casting with a Thixotropic Behavior
Compositional Control in Solid Freeforming; Fabrication of 3D FGM
Microstructural Characterization of Fine-Grained Pb(Zr0.52Ti0.48)O3 Ceramics Fabricated by a Spark Plasma Sintering
Rapid Fabrication of C/C-SiC Composites
Strengthening Effect of In-Situ Dispersed Hexagonal Boron Nitride in Ceramic Composites
Biomorphic SiC Ceramics Prepared by Organic Template Method
Fabrication of a Strontium-Doped Lanthanum Chromite (LSC) Thin Film on SUS430 Substrate
Influence of Nitride on Sinterability of the Composite of Lithium Aluminum Silicate and Silicon Carbide
Hydrogen Reduction and Sintering Behavior of Al2O3/CuO Powder Mixtures Prepared from Different Raw Powders
Low Cost Si3N4/SiC Nanocomposites, Processing, RT and HT Properties
Fabrication of Si3 N4-TiN Nanocomposites via Various Routes
Hydrothermal Synthesis of Nano ZrO2 Powders
Synthesis of Nanocrystalline ?-Al2O3 Using a 2-Step Calcination Method
Nano Magnetite Particles Prepared under the Combined Addition of Urea and Ammonia
Synthesis of Nano-Scaled ?-Al2O3 Particles by Combustion Spray Pyrolysis
Synthesis of SiC Nano-Powders by Solid-Vapor Reaction
Formation Mechanism of Nano AlN Powder by Gas-Reduction-Nitridation
Synthesis of Metal Oxide Hollow Nanoparticles by Chemical Vapor Condensation Process
Microwave-Assisted Synthesis of MWO4 and MMoO4 (M = Ca, Ni) Nano-Powders Using Citrate Complex Precursor
Synthesis and Microstructure of TiO2-SiO2 Nanoparticles by a Reverse Micelle and Sol-Gel Processing
Fabrication and Applications of Nano-Metal Particle Composites by Ultrasonic Eco-Process
Fabrication and Estimation of Au Coated ?-Fe2O3 Nanoparticles for Separation and Purification of Biomolecules
Nano-Structured High Purity Copper Processed by Accumulative Roll-Bonding
Direct Hydrothermal Processing of Long Titanate Nanofibers from Natural Rutile
Synthesis of Nanotubular Titanate from Titanium Using Hydrothermal Treatment
Synthesis and Properties of Titania Nanotube Doped with Small Amount of Cations
High Pressure / Low Temperature Sintering of Nanostructured Titania by Internal Heating Method
Growth of Carbon Nanotubes on Surface of Carbon Fibers Rod
On the Dissolution of WC in WC-Co Alloys
Conventional Sintering Route for the Production of Alumina-Based Nanocomposites: A Microstructural Characterization
Energy Changes and the Lattice Resistance
Shot Peening - A New Method for Improving Mechanical Properties of Structural Ceramics
Critical Frontal Process Zone Size and R-Curve Behavior of Porous Ceramics
Characteristics of Machining Damage and Their Influence on Strength in Alumina Ceramics System
Estimation of Residual Stress in a Ceramic Coating Layer
From Niihara's Equation to Peculiar Nanoindentation Deformation of Ceramics and Semiconductors
Fracture Toughness of Fibrous Si3N4 Monolithic Ceramics
Prediction of Fracture Toughness in Fibrous Si3 N4 Monolithic Ceramics
Mechanical Properties of Transparent Polycrystalline Silicon Nitride
Electrical Resistance Behavior during Tensile Loading of Al2 O3 Fiber-Nano RuO2-Glass Composites
Gas Pressure Dependence of Photon Emission Accompanying Fracture of Polycrystalline MgO in Nitrogen
Mechanical Properties of Sol-Gel Inorganic-Organic Hybrid Films in Nanoindentation
The Change of Mechanical Properties for Anodic Aluminum Oxide by Heat Treatment
Microstructures and Mechanical Properties of Nano-Structured Aluminum Fabricated by Accumulative Roll-Bonding Using Different Rolling Methods
The Microstructures and Mechanical Properties of Molybdenum Disilicide Preforms Infiltrated by Aluminum
Development of Low Machining Cost Materials by Using Aluminum Borate
Estimation of Thermal Shock Resistance by Infrared Radiation Heating and Water Flow Cooling Techniques
Improvement in Oxidation and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials by Interfacial Control
Microscopic Study of Sliding Wear Surfaces of Alumina
Dry Sliding Wear of Lu2O3 Sialon Ceramics
Increasing the Effectiveness of Aluminium Phosphate Binders
Rolling Life Properties of Ceramic Bearings in Water
Tribological Properties and Thermal Conductivity of Si3 N4 / Si3N4-BN Alternate Layered Composites
Wear Behavior of Nano-Sized Metal Particle Dispersed Al2O3 Nanocomposites
Fabrication of Nanoabrasive Grinding Wheels and Their Application to Grinding Silicon Wafers
Tribological Property of Plasma Sprayed TiO2 Coating
Adhesive and Wear Properties of Indium Tin Oxide (ITO) Thin Films Deposited by RF Magnetron Sputter
Tribological Properties of TiN/DLC Nanocomposite Coatings
Corrosion Resistance of Commercial Si3N4 Bearing Balls
Characteristic Evaluation of High Corrosion Resistant Ti/ (Pt + B2O3) Electrode with New Microstructure of Coat
Effect of Chemical Composition of Intergranular Glass on Superplastic Deformation of ?-Silicon Nitride
Superplastic Deformation of Silicon Nitride Nanocomposite at High Strain Rates
Superplastic Behavior in GeO2 - TiO2 Doped TZP
Surface Diffusion and Incorporation Process of Adatom in Fe-Al Multilayer System
Oxygen Diffusion along Symmetric [0001] Tilt Grain Boundaries in ?-Alumina
Oxynitride Glasses and Their Properties - Implications for High Temperature Performance of Silicon Nitride-Based Ceramics
High-Temperature Properties of Silicon Nitride with Lu-Si-O-N Grain Boundary Phases
Analysis of Internal Friction on Silicon Nitride with Visco-Elastic Model
Deformation Behavior of SiO2 Doped Nanocrystalline Monoclinic Zirconia at Low Temperatures
Microstructure and High Temperature Strength Characteristics of Unidirectionally Solidified Al2 O3 /GdAlO3 Eutectic Composite
Influence of Grain Boundary Properties on Microcracking of AlN in Sliding Test
The Effect of Particle Migration on the Creep-Rate of Nanocomposites
Crack Propagation Behavior of Alumina with Different Grain Sizes under Static and Cyclic Fatigue
Crack-Healing under Cyclic Stress and Improvement of the Resultant Fatigue Strength of Si3N4/SiC
Evaluation and Control of Crack Propagation in Dense Porcelain/ Porous Alumina Layered Structures for Dental Material Applications
Critical Conditions for Crack-Healing of Structural Ceramics under Constant or Cyclic Stress
Simultaneous Removal of SOx and NOx by Catalytic Cordierite Filter
Indentation Contact Deformation of 3Y-TZP at Elevated Temperatures
High Temperature Characteristics of Melt Growth Composites and Their Application to Ultra High Efficiency Gas Turbine Components
Development and Evaluation of Ceramic Components for a Gas Turbine
Effect of Reactive Filler Addition for Matrix of SiC Fiber/SiC Composite
Thermal and Electrical Conductivities of Porous Carbon-Coated Ceramic Fiber Composites
Laser Chemical Vapor Deposition of Thick Oxide Coatings
La2O3 Doped Y2O3 Stabilized ZrO2 TBC Prepared by EB-PVD
Deposition Behavior of YSZ Nano-Coating Layer by EB-PVD
Thermal Conductivity of Nano-Pore Dispersed Y-PSZ Fabricated by EB-PVD
Thermal Stability and Mechanical Properties of Plasma Sprayed Al2O3/ZrO2 Nano-Composite Coating
Investigation of Strontium-Niobium Oxides for Application to Thermal Barrier Coatings
Thermal Conductivity of Zirconia for Thermal Barrier Coatings: A Perturbed Molecular Dynamics Study
Mechanical Properties and Damage Durability of Thermal Barrier Coatings with Thermal Fatigue
Advances in YSZ Coatings Prepared by Sol-Gel Route. Applications to Fuel Cells or Thermal Barrier Coatings
New Challenge of Plasma Spray Coatings in Nano Oxide Ceramics
Development of Nanostructured Al2O3-Ni HVOF Coatings
Process Optimization for Nanostructured HVOF -Sprayed Al2O3-Based Ceramic Coatings
Quest and Evaluation of Topcoat Materials for Environmental Barrier Coatings of SiC/SiC Composites
Reliability during Thermal Shock Testing of NiCr Films on Mn-Ni-Co Oxide Substrates
Comparison of Water Vapor Corrosion Behaviors of Ln2Si2O7 (Ln=Yb and Lu) and ASiO4 (A=Ti, Zr and Hf) EBC's
Characterization and Photocatalytic Properties of Plasma Sprayed TiO2 Coatings Deposited from Nanoparticles
Titania Nanocrystals-Dispersed Coatings from SiO2-TiO2 Gel Films through Hydrolysis and Dissolution
Preparation and Characterization of Titania Thin Films
Development of Silicon Carbide Coating on Al2O3 Ceramics from Precursor Polymers by Radiation Curing
Accelerated Degradation Test of Indium Tin Oxide (ITO) Thin Films Deposited by RF Magnetron Sputter
Local Acceleration Effects of Adatom at the Vicinity on the Surface: Case of Co Nano Thin-Films on Al Surface
Laser-Assisted Synthesis of Amorphous/Pseudoamorphous GaN Thin Films and Nanostructures
The Effects of Nitrogen and Annealing on the Electrical Property of the Diamond-Like Carbon (DLC) Films
The Anisotropic Properties of the Tape Cast Si3N4 Ceramics with Rod-Like ?-Si3N4 Seeds Addition
Fabrication and Characterization of Zirconia-Based New Ceramic Composites for Thermal Barrier Coatings
Design and Characterization of Porosity Gradient for the Laminated Alumina Tubes
Alumina-Based Nanocomposites Fabricated by a Novel Soaking Method
Properties and Microstructure of Mullite-Based Iron Nanocomposite
High-Toughness Tetragonal Zirconia/Alumina Nano-Ceramics
Microstructures and Mechanical Properties of Fine-Scale Fibrous Alumina / Zirconia Bi-Phase Composite Fabricated by Co-Extrusion Process
Nanocomposite Formation in the Fe3O4-M (M=Al, Ti) Systems by Mechanical Alloying
Fabrication of ?-Sialon Nano-Ceramics
Fabrication and Evaluation of ?-SiAlON Nanoceramics
Fabrication and Properties of Machinable AlN-BN Ceramic Nanocomposites
Electrical Properties of AlN-SiC Ceramics
Fabrication of Electronic Conductive Silicon Nitride Ceramics by Convenient Powder Metallurgical Process
Effect of Oxynitride Grain Boundary Phase on Toughening of Silicon Nitride Ceramics
Electrically Conductive Aluminum Nitride Ceramics Containing In-Situ Synthesized Boron Carbonitride
Fabrication of Conductive Alumina by Gelcasting and Reduction Sintering
Preparation and Electrical Properties of Carbon Nanotubes Dispersed Zirconia Nanocomposites
Synthesis and Densification of CNTs/Fe/Al2O3 Nanocomposite Powders by Chemical Vapor Deposition
Preparation of Organic/Inorganic Nanocomposites with Microwave Process
Fabrication of Yttria Stabilized Tetragonal Zirconia Polycrystals Containing TiNi Intermetallic Compounds
Synthesis of Monodispersed Inorganic-Organic Hybrid Particles from Phenyltriethoxysilane
Evaluation of Thermal Stability of Porous Material by Sintering Stress
Preparation and Properties of Porous Alumina Ceramics with Oriented Pores
Fabrication and Characteristic of Porous Alumina Developed with SiC Nano-Fiber or Nano-Whisker
Preparation of Ceramic Honeycomb Filter Supported Zeolite Membrane Modules by Microwave-Assisted In-Situ Crystallization
In-Situ Formation and Coating of Cordierite Whiskers on Cordierite Based Honeycomb Support
Fabrication of Porous Ni-ZrO2 for SOFC Using NiO-ZrO2 Composite Powders
Synthesis and Application of Nano Porous La0.6Sr0.4CoO3-? on an Oxygen Separation Membrane
Durability of Ceramic Filter for Hot Gas Cleaning
Macroporous Ceramics Coated with Mesoporous Layer for Enzyme Encapsulation
Preparation of Bimodal Porous Apatite Ceramics through Slip Casting Using Fine Hydroxyapatite Powders
Fabrication of Uniformly Nano-Sized Macroporous Silica Structure Using Templates
Fabrication of Large Ceramic Components with Controlled Microstructure by Powder Thermoset Molding
Mineral Sand as a Low Cost Source of Nanomaterials
Fabrication and Characterization of Zeolite-Carbon Composite from Industrial Wastes
Evaluation of Energy Consumption in Ceramic Fabrication Process for Alumina Ceramics with Diverse Particle Sizes
Fabrication of Al2O3 Ceramics by Environmentally Friendly Process
Characteristics of Wall and Floor Tiles Using Waste Glass
Honeycomb Supports, Filters and Catalysts for Cleaner Environment
Preparation of Porous Hydroxyapatite Using Extrusion of PAN
Synthesis and Characterization of Calcium Phosphate-AMP Layered Materials
Finite Element Analysis on Proof Testing of Ceramic Ball Heads for Total Hip Replacements: Trauma Loading Considerations
Application of Zeolites on Cellulose Fiber
Formation of Hydroxyapatite from Mechanochemically Treated ?-Tricalcium Bis (Orthophosphate)
Transmission Electron Microscopic Study on Thermal Decomposition Process of Calcium-Deficient Hydroxyapatite
Dissolution and Mechanical Properties of Sintered Hydroxyapatite Immersed in Water
Correlation of Physical Properties of Inorganic Carrier and Microbial Survival Rate
Luminescence Properties of Rare-Earth Doped ?-SiAlONs
Effects of Sn2+ Co-Doping on the Photoluminescence of Eu3+ Ion in Strontium Phosphate
Synthesis of WO3 Electrochromic Sensor by Sol-Gel Method and Characterization of Its Electrochemical and Optical Properties
Thermoelectric Properties of Al-Doped ZnO Prepared by Electrical Field-Assist Sintering
Photocatalytic Activity of Titania and Zirconia-Doped Titania Nanocrystals Prepared by Surfactant-Assisted Templating Method
Comparison of Adsorption Capability and Photocatalytic Activity for Methylene Blue Decomposition of LiInO2 with NaInO2
The Preparation of Visible Light-Responsive TiO2 Thin Films by Applying a RF-Magnetron Sputtering Deposition Method and Their Photocatalytic Reactivity for the Decomposition of Water with a Separate Evolution of H2 and O2
The Intelligent Catalyst: Pd-Perovskite Having the Self-Regenerative Function in a Wide Temperature Range
The Self-Regenerative "Intelligent" Catalyst for Automotive Emissions Control
Removal of Heavy Metal Ions from Aqueous Pb-EDTA and Cu-EDTA Solutions Using Nanosized ZnO Powders by Solution-Combustion Method
Synthesis of Solution-Combusted ZnO Nanopowder and Its Application to Gold Recovery
Effect of Additives on Dielectric Loss of AlN Ceramics
Dielectric and Piezoelectric Properties of xPb(Ni1/3Nb2/3)O3 - yPb(Mn1/3Nb1/3Sb1/3)O3- (1-x-y)Pb(Zr0.48Ti0.52)O3 Ceramics
Effect of Sintering Temperature on Structure, Piezoelectric and Ferroelectric Properties of (Na0.5Bi0.5)0.90Ba0.10TiO3 Ceramic
Thermodynamic and Dielectric Properties of MgSiN2 Ceramics
Ultrasonic Spray Nozzle System with Piezoelectric Ceramics for Water Treatment Applications
Pressure Sensing Using Electrostatic Capacitance
Preparation and Evaluation of Metal/Ceramic Nanocomposites for High Frequency Inductive Devices
Microstructural and Electrical Characterisation of LaxBa1-xTi1-xYxO3 (0? x? 0.50) Ceramics
A Structural Consideration of a Solid Solution La4Ni3-xMnxO10
Extraction of Crystal Structures Based on Euclidean Voronoi Diagram and Angle Distributions among Atoms
Sintering and Electronic Conducting Properties of La0.8Ca0.2CrO3 Perovskite-Type Complex Oxides Synthesized by Different Methods
Magnetic and Electronic Properties of Transition Metal Doped ?-SiC - A Diluted Magnetic Semiconductor
Development of Ferrite Magnetic Materials with High Strength by a Low-Temperature Sintering Method
Processing and Mechanical Properties of Microcellular Ceramics
Preparation and Properties of a Novel Anode of Interpenetrating Phase Composite Structure
Fabrication and Fuel Cell Properties of Gd-Doped CeO2 Micro-Tube Ceramics Reactors Prepared by Gel Precursor
Preparation of YSZ Electrolyte for SOFC by Electron Beam PVD
Effect of Alumina Additions on Mechanical and Electrical Properties of 8mol% Yttria-Stabilized Zirconia Prepared by Spark Plasma Sintering
Sealing Behavior of Visco-Elastic Composite Seals for SOFC Applications