The Science of Engineering Ceramics III

<ul><li>Investigation of the Sintering Behavior of Ultrapure ?-Alumina Containing Low Amounts of SiO₂ or CaO</li><li>Sintering Behavior of Microstructured ?-Alumina with Nanosized ?-Alumina Additive</li><li>Control of Shrinkage during Sintering of Alumina Ceramics Based on Master Sintering Curve Theory</li><li>Bulk Consolidation of Non-Oxide Ceramic Powders Derived from Polymer Precursors</li><li>Centrifugal Sintering</li><li>Low-Temperature Sintering of ?- and ?-SiC Powders with AlB₂ Additive</li><li>Sintering and Characterization of Zr₂Al₃C₅ Monolith</li><li>Thermal Evolution of Single Phase Lanthanum Zirconate</li><li>Sinterability of Alumina-Dispersed 3Y-TZP</li><li>Preparation of Ce-ZrO₂ Based Composites and Effect of Addition of 3Y-ZrO₂ on Their Microstructures</li><li>Grinding of Agglomerate AlN Powder by Wet Milling</li><li>Wet Jet Milling of Ceramics Powder</li><li>Hydrothermal Preparation and Characterization of Barium Titanate Powders</li><li>Fabrication and Characterization of Various Calcium Phosphate Powders by Ultrasonic Spray Pyrolysis Technique</li><li>Fabrication and Characteristics of Hypereutectic Prealloyed Al-Si Powders by Gas Atomization Process</li><li>Effect of Magnesium Ion on the Precipitation of Hollow Calcium Carbonate by Bubble Templating Method</li><li>Effect of Different Salt on Fabrication of Sr_0.5Ba_0.5Nb₂O₆ by Molten-Salt Synthesis</li><li>Processing and Property Evaluation of Alumina Aerogel Based Ceramic Nanocomposites</li><li>Dispersion of ZrO₂ Particles in the Al₂O₃/ZrO₂ Ceramics by the Partial Chemical Dispersion Processes</li><li>Pre-Combustion CO₂ Capture Using Ceramic Absorbent and Methane Steam Reforming</li><li>Kumada Rearrangement of Polydimethylsilane Using a Catalytic Process</li><li>Effect of Additives on Hydrolysis of Ti Alkoxide and Microstructural Observation of TiO₂</li><li>Sol-Gel Preparation and Characterizations of Europium-Ion Doped Barium Magnesium Aluminate</li><li>Syntheses of Bulky Y-Zeolite by Hydrothermal Hot-Pressing (HHP) Technique</li><li>Densification and Strengthening of Tricalcium Phosphate/Titania Composite by Hot Pressing</li><li>Preparation of Mullite Composite Using Liquid Infiltration Technique</li><li>Liquid-Phase Sintered Silicon Carbide with Aluminum Nitride and Rare-Earth Oxide Additives</li><li>Effect of ?-Alumina as a Seed in Alumina/Silicon Carbide Composites</li><li>Preparation and Morphology of C/C-SiC Composites by Si Melt Infiltration</li><li>Preparation and Properties of Silicon Nitride Ceramics by Nitrided Pressureless Sintering (NPS) Process</li><li>Microwave Sintering BaTiO₃ Ceramics Using Liquid Phase Sintering</li><li>Thermodynamical Calculations and Experimental Confirmation about the Mg-Al-Spinel Reaction Path in the Sol-Gel-Process</li><li>Fabrication and Structure of TiO₂ Coated Open-Cell Mullite Ceramics</li><li>Dispersion of Barium Ferrite Particles for Slip Casting in Magnetic Field</li><li>The Vibrative Casting with a Thixotropic Behavior</li><li>Compositional Control in Solid Freeforming; Fabrication of 3D FGM</li><li>Microstructural Characterization of Fine-Grained Pb(Zr_0.52Ti_0.48)O₃ Ceramics Fabricated by a Spark Plasma Sintering</li><li>Rapid Fabrication of C/C-SiC Composites</li><li>Strengthening Effect of In-Situ Dispersed Hexagonal Boron Nitride in Ceramic Composites</li><li>Biomorphic SiC Ceramics Prepared by Organic Template Method</li><li>Fabrication of a Strontium-Doped Lanthanum Chromite (LSC) Thin Film on SUS430 Substrate</li><li>Influence of Nitride on Sinterability of the Composite of Lithium Aluminum Silicate and Silicon Carbide</li><li>Hydrogen Reduction and Sintering Behavior of Al₂O₃/CuO Powder Mixtures Prepared from Different Raw Powders</li><li>Low Cost Si₃N₄/SiC Nanocomposites, Processing, RT and HT Properties</li><li>Fabrication of Si₃ N₄-TiN Nanocomposites via Various Routes</li><li>Hydrothermal Synthesis of Nano ZrO₂ Powders</li><li>Synthesis of Nanocrystalline ?-Al₂O₃ Using a 2-Step Calcination Method</li><li>Nano Magnetite Particles Prepared under the Combined Addition of Urea and Ammonia</li><li>Synthesis of Nano-Scaled ?-Al₂O₃ Particles by Combustion Spray Pyrolysis</li><li>Synthesis of SiC Nano-Powders by Solid-Vapor Reaction</li><li>Formation Mechanism of Nano AlN Powder by Gas-Reduction-Nitridation</li><li>Synthesis of Metal Oxide Hollow Nanoparticles by Chemical Vapor Condensation Process</li><li>Microwave-Assisted Synthesis of MWO₄ and MMoO₄ (M = Ca, Ni) Nano-Powders Using Citrate Complex Precursor</li><li>Synthesis and Microstructure of TiO₂-SiO₂ Nanoparticles by a Reverse Micelle and Sol-Gel Processing</li><li>Fabrication and Applications of Nano-Metal Particle Composites by Ultrasonic Eco-Process</li><li>Fabrication and Estimation of Au Coated ?-Fe₂O₃ Nanoparticles for Separation and Purification of Biomolecules</li><li>Nano-Structured High Purity Copper Processed by Accumulative Roll-Bonding</li><li>Direct Hydrothermal Processing of Long Titanate Nanofibers from Natural Rutile</li><li>Synthesis of Nanotubular Titanate from Titanium Using Hydrothermal Treatment</li><li>Synthesis and Properties of Titania Nanotube Doped with Small Amount of Cations</li><li>High Pressure / Low Temperature Sintering of Nanostructured Titania by Internal Heating Method</li><li>Growth of Carbon Nanotubes on Surface of Carbon Fibers Rod</li><li>On the Dissolution of WC in WC-Co Alloys</li><li>Conventional Sintering Route for the Production of Alumina-Based Nanocomposites: A Microstructural Characterization</li><li>Energy Changes and the Lattice Resistance</li><li>Shot Peening - A New Method for Improving Mechanical Properties of Structural Ceramics</li><li>Critical Frontal Process Zone Size and R-Curve Behavior of Porous Ceramics</li><li>Characteristics of Machining Damage and Their Influence on Strength in Alumina Ceramics System</li><li>Estimation of Residual Stress in a Ceramic Coating Layer</li><li>From Niihara's Equation to Peculiar Nanoindentation Deformation of Ceramics and Semiconductors</li><li>Fracture Toughness of Fibrous Si₃N₄ Monolithic Ceramics</li><li>Prediction of Fracture Toughness in Fibrous Si₃ N₄ Monolithic Ceramics</li><li>Mechanical Properties of Transparent Polycrystalline Silicon Nitride</li><li>Electrical Resistance Behavior during Tensile Loading of Al₂ O₃ Fiber-Nano RuO₂-Glass Composites</li><li>Gas Pressure Dependence of Photon Emission Accompanying Fracture of Polycrystalline MgO in Nitrogen</li><li>Mechanical Properties of Sol-Gel Inorganic-Organic Hybrid Films in Nanoindentation</li><li>The Change of Mechanical Properties for Anodic Aluminum Oxide by Heat Treatment</li><li>Microstructures and Mechanical Properties of Nano-Structured Aluminum Fabricated by Accumulative Roll-Bonding Using Different Rolling Methods</li><li>The Microstructures and Mechanical Properties of Molybdenum Disilicide Preforms Infiltrated by Aluminum</li><li>Development of Low Machining Cost Materials by Using Aluminum Borate</li><li>Estimation of Thermal Shock Resistance by Infrared Radiation Heating and Water Flow Cooling Techniques</li><li>Improvement in Oxidation and Thermal Shock Resistance of Molten Glass-Coated Carbon Materials by Interfacial Control</li><li>Microscopic Study of Sliding Wear Surfaces of Alumina</li><li>Dry Sliding Wear of Lu₂O₃ Sialon Ceramics</li><li>Increasing the Effectiveness of Aluminium Phosphate Binders</li><li>Rolling Life Properties of Ceramic Bearings in Water</li><li>Tribological Properties and Thermal Conductivity of Si₃ N₄ / Si₃N₄-BN Alternate Layered Composites</li><li>Wear Behavior of Nano-Sized Metal Particle Dispersed Al₂O₃ Nanocomposites</li><li>Fabrication of Nanoabrasive Grinding Wheels and Their Application to Grinding Silicon Wafers</li><li>Tribological Property of Plasma Sprayed TiO₂ Coating</li><li>Adhesive and Wear Properties of Indium Tin Oxide (ITO) Thin Films Deposited by RF Magnetron Sputter</li><li>Tribological Properties of TiN/DLC Nanocomposite Coatings</li><li>Corrosion Resistance of Commercial Si₃N₄ Bearing Balls</li><li>Characteristic Evaluation of High Corrosion Resistant Ti/ (Pt + B₂O₃) Electrode with New Microstructure of Coat</li><li>Effect of Chemical Composition of Intergranular Glass on Superplastic Deformation of ?-Silicon Nitride</li><li>Superplastic Deformation of Silicon Nitride Nanocomposite at High Strain Rates</li><li>Superplastic Behavior in GeO₂ - TiO₂ Doped TZP</li><li>Surface Diffusion and Incorporation Process of Adatom in Fe-Al Multilayer System</li><li>Oxygen Diffusion along Symmetric [0001] Tilt Grain Boundaries in ?-Alumina</li><li>Oxynitride Glasses and Their Properties - Implications for High Temperature Performance of Silicon Nitride-Based Ceramics</li><li>High-Temperature Properties of Silicon Nitride with Lu-Si-O-N Grain Boundary Phases</li><li>Analysis of Internal Friction on Silicon Nitride with Visco-Elastic Model</li><li>Deformation Behavior of SiO₂ Doped Nanocrystalline Monoclinic Zirconia at Low Temperatures</li><li>Microstructure and High Temperature Strength Characteristics of Unidirectionally Solidified Al₂ O₃ /GdAlO₃ Eutectic Composite</li><li>Influence of Grain Boundary Properties on Microcracking of AlN in Sliding Test</li><li>The Effect of Particle Migration on the Creep-Rate of Nanocomposites</li><li>Crack Propagation Behavior of Alumina with Different Grain Sizes under Static and Cyclic Fatigue</li><li>Crack-Healing under Cyclic Stress and Improvement of the Resultant Fatigue Strength of Si₃N₄/SiC</li><li>Evaluation and Control of Crack Propagation in Dense Porcelain/ Porous Alumina Layered Structures for Dental Material Applications</li><li>Critical Conditions for Crack-Healing of Structural Ceramics under Constant or Cyclic Stress</li><li>Simultaneous Removal of SO_x and NO_x by Catalytic Cordierite Filter</li><li>Indentation Contact Deformation of 3Y-TZP at Elevated Temperatures</li><li>High Temperature Characteristics of Melt Growth Composites and Their Application to Ultra High Efficiency Gas Turbine Components</li><li>Development and Evaluation of Ceramic Components for a Gas Turbine</li><li>Effect of Reactive Filler Addition for Matrix of SiC Fiber/SiC Composite</li><li>Thermal and Electrical Conductivities of Porous Carbon-Coated Ceramic Fiber Composites</li><li>Laser Chemical Vapor Deposition of Thick Oxide Coatings</li><li>La₂O₃ Doped Y₂O₃ Stabilized ZrO₂ TBC Prepared by EB-PVD</li><li>Deposition Behavior of YSZ Nano-Coating Layer by EB-PVD</li><li>Thermal Conductivity of Nano-Pore Dispersed Y-PSZ Fabricated by EB-PVD</li><li>Thermal Stability and Mechanical Properties of Plasma Sprayed Al₂O₃/ZrO₂ Nano-Composite Coating</li><li>Investigation of Strontium-Niobium Oxides for Application to Thermal Barrier Coatings</li><li>Thermal Conductivity of Zirconia for Thermal Barrier Coatings: A Perturbed Molecular Dynamics Study</li><li>Mechanical Properties and Damage Durability of Thermal Barrier Coatings with Thermal Fatigue</li><li>Advances in YSZ Coatings Prepared by Sol-Gel Route. Applications to Fuel Cells or Thermal Barrier Coatings</li><li>New Challenge of Plasma Spray Coatings in Nano Oxide Ceramics</li><li>Development of Nanostructured Al₂O₃-Ni HVOF Coatings</li><li>Process Optimization for Nanostructured HVOF -Sprayed Al₂O₃-Based Ceramic Coatings</li><li>Quest and Evaluation of Topcoat Materials for Environmental Barrier Coatings of SiC/SiC Composites</li><li>Reliability during Thermal Shock Testing of NiCr Films on Mn-Ni-Co Oxide Substrates</li><li>Comparison of Water Vapor Corrosion Behaviors of Ln₂Si₂O₇ (Ln=Yb and Lu) and ASiO₄ (A=Ti, Zr and Hf) EBC's</li><li>Characterization and Photocatalytic Properties of Plasma Sprayed TiO₂ Coatings Deposited from Nanoparticles</li><li>Titania Nanocrystals-Dispersed Coatings from SiO₂-TiO₂ Gel Films through Hydrolysis and Dissolution</li><li>Preparation and Characterization of Titania Thin Films</li><li>Development of Silicon Carbide Coating on Al₂O₃ Ceramics from Precursor Polymers by Radiation Curing</li><li>Accelerated Degradation Test of Indium Tin Oxide (ITO) Thin Films Deposited by RF Magnetron Sputter</li><li>Local Acceleration Effects of Adatom at the Vicinity on the Surface: Case of Co Nano Thin-Films on Al Surface</li><li>Laser-Assisted Synthesis of Amorphous/Pseudoamorphous GaN Thin Films and Nanostructures</li><li>The Effects of Nitrogen and Annealing on the Electrical Property of the Diamond-Like Carbon (DLC) Films</li><li>The Anisotropic Properties of the Tape Cast Si₃N₄ Ceramics with Rod-Like ?-Si₃N₄ Seeds Addition</li><li>Fabrication and Characterization of Zirconia-Based New Ceramic Composites for Thermal Barrier Coatings</li><li>Design and Characterization of Porosity Gradient for the Laminated Alumina Tubes</li><li>Alumina-Based Nanocomposites Fabricated by a Novel Soaking Method</li><li>Properties and Microstructure of Mullite-Based Iron Nanocomposite</li><li>High-Toughness Tetragonal Zirconia/Alumina Nano-Ceramics</li><li>Microstructures and Mechanical Properties of Fine-Scale Fibrous Alumina / Zirconia Bi-Phase Composite Fabricated by Co-Extrusion Process</li><li>Nanocomposite Formation in the Fe₃O₄-M (M=Al, Ti) Systems by Mechanical Alloying</li><li>Fabrication of ?-Sialon Nano-Ceramics </li><li>Fabrication and Evaluation of ?-SiAlON Nanoceramics</li><li>Fabrication and Properties of Machinable AlN-BN Ceramic Nanocomposites</li><li>Electrical Properties of AlN-SiC Ceramics</li><li>Fabrication of Electronic Conductive Silicon Nitride Ceramics by Convenient Powder Metallurgical Process</li><li>Effect of Oxynitride Grain Boundary Phase on Toughening of Silicon Nitride Ceramics</li><li>Electrically Conductive Aluminum Nitride Ceramics Containing In-Situ Synthesized Boron Carbonitride</li><li>Fabrication of Conductive Alumina by Gelcasting and Reduction Sintering</li><li>Preparation and Electrical Properties of Carbon Nanotubes Dispersed Zirconia Nanocomposites</li><li>Synthesis and Densification of CNTs/Fe/Al₂O₃ Nanocomposite Powders by Chemical Vapor Deposition</li><li>Preparation of Organic/Inorganic Nanocomposites with Microwave Process</li><li>Fabrication of Yttria Stabilized Tetragonal Zirconia Polycrystals Containing TiNi Intermetallic Compounds</li><li>Synthesis of Monodispersed Inorganic-Organic Hybrid Particles from Phenyltriethoxysilane</li><li>Evaluation of Thermal Stability of Porous Material by Sintering Stress</li><li>Preparation and Properties of Porous Alumina Ceramics with Oriented Pores</li><li>Fabrication and Characteristic of Porous Alumina Developed with SiC Nano-Fiber or Nano-Whisker</li><li>Preparation of Ceramic Honeycomb Filter Supported Zeolite Membrane Modules by Microwave-Assisted In-Situ Crystallization</li><li>In-Situ Formation and Coating of Cordierite Whiskers on Cordierite Based Honeycomb Support</li><li>Fabrication of Porous Ni-ZrO₂ for SOFC Using NiO-ZrO₂ Composite Powders</li><li>Synthesis and Application of Nano Porous La_0.6Sr_0.4CoO_3-? on an Oxygen Separation Membrane</li><li>Durability of Ceramic Filter for Hot Gas Cleaning</li><li>Macroporous Ceramics Coated with Mesoporous Layer for Enzyme Encapsulation</li><li>Preparation of Bimodal Porous Apatite Ceramics through Slip Casting Using Fine Hydroxyapatite Powders</li><li>Fabrication of Uniformly Nano-Sized Macroporous Silica Structure Using Templates</li><li>Fabrication of Large Ceramic Components with Controlled Microstructure by Powder Thermoset Molding</li><li>Mineral Sand as a Low Cost Source of Nanomaterials</li><li>Fabrication and Characterization of Zeolite-Carbon Composite from Industrial Wastes</li><li>Evaluation of Energy Consumption in Ceramic Fabrication Process for Alumina Ceramics with Diverse Particle Sizes</li><li>Fabrication of Al₂O₃ Ceramics by Environmentally Friendly Process</li><li>Characteristics of Wall and Floor Tiles Using Waste Glass</li><li>Honeycomb Supports, Filters and Catalysts for Cleaner Environment</li><li>Preparation of Porous Hydroxyapatite Using Extrusion of PAN</li><li>Synthesis and Characterization of Calcium Phosphate-AMP Layered Materials</li><li>Finite Element Analysis on Proof Testing of Ceramic Ball Heads for Total Hip Replacements: Trauma Loading Considerations</li><li>Application of Zeolites on Cellulose Fiber</li><li>Formation of Hydroxyapatite from Mechanochemically Treated ?-Tricalcium Bis (Orthophosphate)</li><li>Transmission Electron Microscopic Study on Thermal Decomposition Process of Calcium-Deficient Hydroxyapatite</li><li>Dissolution and Mechanical Properties of Sintered Hydroxyapatite Immersed in Water</li><li>Correlation of Physical Properties of Inorganic Carrier and Microbial Survival Rate</li><li>Luminescence Properties of Rare-Earth Doped ?-SiAlONs</li><li>Effects of Sn²⁺ Co-Doping on the Photoluminescence of Eu³⁺ Ion in Strontium Phosphate</li><li>Synthesis of WO₃ Electrochromic Sensor by Sol-Gel Method and Characterization of Its Electrochemical and Optical Properties</li><li>Thermoelectric Properties of Al-Doped ZnO Prepared by Electrical Field-Assist Sintering</li><li>Photocatalytic Activity of Titania and Zirconia-Doped Titania Nanocrystals Prepared by Surfactant-Assisted Templating Method</li><li>Comparison of Adsorption Capability and Photocatalytic Activity for Methylene Blue Decomposition of LiInO₂ with NaInO₂</li><li>The Preparation of Visible Light-Responsive TiO₂ Thin Films by Applying a RF-Magnetron Sputtering Deposition Method and Their Photocatalytic Reactivity for the Decomposition of Water with a Separate Evolution of H₂ and O₂</li><li>The Intelligent Catalyst: Pd-Perovskite Having the Self-Regenerative Function in a Wide Temperature Range</li><li>The Self-Regenerative "Intelligent" Catalyst for Automotive Emissions Control </li><li>Removal of Heavy Metal Ions from Aqueous Pb-EDTA and Cu-EDTA Solutions Using Nanosized ZnO Powders by Solution-Combustion Method</li><li>Synthesis of Solution-Combusted ZnO Nanopowder and Its Application to Gold Recovery</li><li>Effect of Additives on Dielectric Loss of AlN Ceramics</li><li>Dielectric and Piezoelectric Properties of xPb(Ni_1/3Nb_2/3)O₃ - yPb(Mn_1/3Nb_1/3Sb_1/3)O₃- (1-x-y)Pb(Zr_0.48Ti_0.52)O₃ Ceramics</li><li>Effect of Sintering Temperature on Structure, Piezoelectric and Ferroelectric Properties of (Na_0.5Bi_0.5)_0.90Ba_0.10TiO₃ Ceramic</li><li>Thermodynamic and Dielectric Properties of MgSiN₂ Ceramics</li><li>Ultrasonic Spray Nozzle System with Piezoelectric Ceramics for Water Treatment Applications</li><li>Pressure Sensing Using Electrostatic Capacitance</li><li>Preparation and Evaluation of Metal/Ceramic Nanocomposites for High Frequency Inductive Devices</li><li>Microstructural and Electrical Characterisation of La_xBa_1-xTi_1-xY_xO₃ (0? x? 0.50) Ceramics</li><li>A Structural Consideration of a Solid Solution La₄Ni_3-xMn_xO₁₀</li><li>Extraction of Crystal Structures Based on Euclidean Voronoi Diagram and Angle Distributions among Atoms</li><li>Sintering and Electronic Conducting Properties of La_0.8Ca_0.2CrO₃ Perovskite-Type Complex Oxides Synthesized by Different Methods</li><li>Magnetic and Electronic Properties of Transition Metal Doped ?-SiC - A Diluted Magnetic Semiconductor</li><li>Development of Ferrite Magnetic Materials with High Strength by a Low-Temperature Sintering Method</li><li>Processing and Mechanical Properties of Microcellular Ceramics</li><li>Preparation and Properties of a Novel Anode of Interpenetrating Phase Composite Structure</li><li>Fabrication and Fuel Cell Properties of Gd-Doped CeO₂ Micro-Tube Ceramics Reactors Prepared by Gel Precursor</li><li>Preparation of YSZ Electrolyte for SOFC by Electron Beam PVD</li><li>Effect of Alumina Additions on Mechanical and Electrical Properties of 8mol% Yttria-Stabilized Zirconia Prepared by Spark Plasma Sintering</li><li>Sealing Behavior of Visco-Elastic Composite Seals for SOFC Applications</li></ul>