Material Sciences and Technology

Preface
Chapter 1: Analytical Chemistry
Crystallization Behavior of Heat-Treated Basalt Fiber
Preparation and Characterization of Highly Monodisperse Vinyl Functionalized Silica Spheres by Sol-Gel Method
Pseudo-Elastic Behavior of NiTi SMA under the Quasi-Static and the Impact Cyclic Tests
Calculation for Precise Determination of Adsorption Equilibrium Isotherms of Pollutants on Soil and Bio-Sorbents
FT-IR Studies of Acid Properties of Physically Mixed Mo/HZSM-5 Catalysts for Methane Dehydroaromatization
Measurement and Correlation of Solubilities and Surface Tension of Caffeine in Water
The Microscopic Mechanism of Compton Scattering of Some Saline Solutions
Phase Structure of Acrylic Fibers Processed with Ionic Liquid as Solvent
Feed Rate on Velocity Field of Liquid Film in a Wiped Film Molecular Distillatory
Some Properties and Detection Methods of Paper Sludge
Theoretical Investigation of Mechanism by Oxidizing Material for Carbon Dioxide Reforming of Methane over Platinum Catalyst
Structural Study of Bisphenol-A Benzoxazine by Tandem Mass Analysis
Study on the Structure and Surface Acoustic Wave Properties of KDP and ADP Crystals
Chapter 2: Physical Chemistry
Modeling of Nitrogen Adsorption Process in a 5A Zeolite Pellet
Isobaric Vapor-Liquid Equilibria for the System Containing Acetic Acid at 101.3kPa
Study on Thermophysical Properties of Partially Oxidized Polymer Derived SiC Composites
Asymmetric Heat Transfer of Deformation on Frictional Surface of Mechanical Seals
Effect Factors of SHS Combustion System in Thermit Welding
The Diffusion Kinetics Equation of Microwave-Assisted Extraction
Fire Performances, Hot Properties and Decomposition Kinetics of Sb2O3/DBDPE/RTV
The Permeation and Swelling Behaviors between DMC, DEC, PC, EC and P(VDF-co-HFP)
Thermal Properties of Carbon/Epoxy Resin Composites Based on the Template of Artificial Sponge
The Study of Fe-Based Broad Amorphous Ribbon's Variable-Temperature Kinetics
Irreversible Thermodynamic Description of Domain Occurrences in Ferroics
Auto-Ignition Temperature Data for Selected Ketones
Effect of Particle Size on the Zener Limit: A Monte Carlo Simulation Approach
Comparative Experimental Study on Performance of Corrugated Tube and Straight Tube Heat Exchanger
Fire and Thermal Hazard Analyses of Industrial Zeolite Catalysis for Phenol Production
Chapter 3: Organic Chemistry
Thermal Stabilization of ?-Al2O3 with Modification of Polyethylene Glycol by Reverse Precipitation Method
Synthesis and Characterization of a Novel Hyperbranched Poly(Diethynylbenzene-Silane)
Thermal and Oxidation Behavior of Boron-Silicon-Containing Arylacetylene Polymer
Kinetics of Epoxidation of Vegetable Oils Catalyzed by Formic Acid, Peroxophosphatotungstate and Methyltrioxorhenium
The Microwave Synthesis and Photocatalytic Activity of Silver Vanadate
Purification of Acetonitrile
Methodology for the Study of Vacuum Gas Oil Hydrocracking Catalysts in a Batch Reactor - Coupling of GC-2D Data with Vapour-Liquid Equilibrium
Synthesis of 5-Acetylacenaphthene Using Silica-Supported Phosphotungstic Heteropoly Acid as an Efficient and Reusable Catalyst
Preparation of Poly (aryl ether) Anion Ionomers with N-Methyl Imidazolium Groups
The Effect of CaCl2 on the Solution Behavior of Aromatic Polysulfonamide in Dimethylformamide
Characterization and Antioxidant Activities of Polysaccharides from Fructus corni
Effect of pH on the Phosphorous Components in Tetra-Hydroxymethyl Phosphonium Chloride Solution
Synthesis of Wood Lignin-Urea-Formaldehyde Resin Adhesive
Chapter 4: Inorganic Chemistry
Thermal Treatment of New Inorganic Thermal Insulation Board Based on Expanded Perlite
Qn Distribution in Silicates: Alkali Silicate Glasses and Melts
Preparation of Precursor of LiNi0.5Mn1.5O4 with High Density by Two-Dryness Co-Precipitation Method
Effect of Synthesis Time on Microscopic Characteristics of 12CaO?7Al2O3
Preparation of Carbon Micro-Spheres from Liquefaction Products of Lignite with NaOH-Methanol
Chapter 5: Catalytical Chemistry
Synthesis of (R)-(-)-Mandelic Acid Ethyl Ester by Asymmetric Reduction of Ethyl Benzoylformate with Yeast Cells
Hierarchical Control Based Virtual Coordinated Synchronization of Chemical Auto Catalytic Reaction Networks
Preparation, Characterization of Co3O4 Nano-Particles and its Catalytic Effect on the Combustion of Fuel Rich Propellants
Preparation of Pt-Sn-K/Al2O3 Catalysts and its Catalytic Performance in Propane Dehydrogenation
One-Pot Synthesis of 1-Benzoylpyrene over Heteropoly Acid Catalysts
Preparation and Catalytic Properties of Zn-HMS Molecular Sieves
Comparative Study of p-nitrophenyl picolinate Hydrolysis Catalyzed by Bis(O,O'-di(2-phenylalkyl)dithiophosphate) nickel(II)
The Reaction Scheme of Partial Oxidation of Methane to Synthesis Gas over Metallic Ni Catalyst
A Study on Catalytic Hydrolysis of Corncob by Formic Acid
Study on Making Low Density Printing Paper with Aspen BECMP as the Main Pulp
Chapter 6: Biochemistry
Kinetic Resolution of Ethyl-2-hydroxy-4-phenylbutyrate with Lipase AK as Catalyst
Abnormal Structural Strength of Topocomposites
Effect of Aging Treatment on Mechanical Properties and Electrical Conductivity of Cu-5.7%Cr In Situ Composite Produced by Equal Channel Angular Pressing
Study on the Optimization of Extraction Technology of Flavonoids in Clerodendrum inerme(L.) Gaertn. Roots
The Application of Cellular Automata in the Dumping Site Analysis
Physical Properties and Antimicrobial Activities of Soy Protein Isolate Edible Films Incorporated with Essential Oil Monomers
Puri?cation and Characterization of a Yam Glycoprotein Isolated by Alkaline Extraction from Yam Tuber
Antitumor Activity and Possible Mechanism of Crude Polysaccharides from Discorea bulbifera L. on the Mice Bearing U14 Cervical Carcinoma
Effect of the Chitosan on the Proliferation of the Microencapsulated Escherichia coli
Effect of Antimycin A on the Glycolytic Flux in Aspergillus niger
Development of a New Adhesive Reagent for Shell Mold Having High Adhesive Strength
Levitated Drop Microreactors for Biochemical Kinetics
Biomimetic Pattern Recognition Method for Breast Cancer Using Gene Expression Data
Preparation of N, O-carboxymethyl chitosan-Human-Like Collagen Microspheres for Drug Delivery
Comparative Evaluation of the Chemical Composition of Essential Oil from Different Parts of Ficus microcarpa
Comparative Evaluation of Total Flavonoid Contents in Different Parts of Ficus microcarpa
Auto-Catalytic Ethanol Pulping of Corncob Acid Hydrolyzed Residua
Preparation and Characterization of Cefradine/Montmorillionite Composites
Chapter 7: Applied Chemistry
The Reduction Mechanism of Biomass Roasting of Goethite Ores
Separation Test of Refractory Lead-Zinc Ore from Myanmar
Incoherent UV/VIS Lasers Assisted Surface Relief Grating Formation
Synthesis and Size Control of Monodisperse Silica Sol Nanospheres via a Modified Stoeber Method
Discussion and Analysis on the Fungus, Humidity and Salt Fog Environmental Test
Separation of Gallium from Aluminum in Fly Ash Digested Solution by Soda-Lime Sintering Process
Hemicellulose-Based Porous Hydrogel for Methylene Blue Adsorption
Effect of Electrochemical Synthesis Conditions on Capacitor Performance of Polyaniline Electrodes
Selective Leaching Nickel from the Pre-Reduced Limonitic Laterite Ore at Atmospheric Pressure
Calcium Doping Effects on the Electrochemical Properties of LiFePO4/C Cathode Materials for Lithium-Ion Batteries
The Impact of Offset Paper on Ink Transfer Rate and Ink Absorption Rate
Development of Technology of Suspension Polymerization of Propylene at "Tomskneftekhim" Company
Rapid and Efficient Coupling Reaction of Azo Dyes in a Continuous-Flow Microreactor
Spark Mixtures for Fireworks
Modernization of Production of High-Purity Quartz Groats from Natural Quartz
Response Surface Methodology (RSM) for Wastewater Flocculation by a Novel (AlCl3-PAM) Hybrid Polymer
Hydroprocessing of Crude Palm Oil to Bio-Diesel Using Mesoporous Catalysts
Study on the Extraction Technique of Poly-methoxyflavonoids from Citrus Peels by Using Response Surface Methodology
The Effect of Oxygen-Functional Groups on the Water Resistance of Lignite Briquette
Production of Biodiesel in Supercritical Methanol and Related Correlation on Phase Equilibrium
Epoxy Resins Treated with Novel Silicon-Containing Flame Retardant
Flame Retardant Epoxy Resins Containing Bisaryl Diphosphates Oligomer
Mechanism and Application Performance of Slow-Release Polycarboxylate Superplasticizer
Synthesis and Properties of Lightweight Geopolymer using Ash from Thermal Power Plants
Preparation of SiO2/PEG Shear Thickening System by Centrifugal Dispersion
Preparation of Cationic Polyacrylamide Flocculant and its Application in the Treatment of Coal Slurry Wastewater
The Analyses of Lignin Structure and Molecular Weight Distributions of Small Fractions from Hardwood Dissolved Alkali Lignin
Study on Properties of Porous Ecological Concrete for Plant-Growing in China
The Axial Distribution of Gas Hold-Up and Solid Concentration in Slurry Reactor and its Effect to the Design of Slurry Reactor
Effect of Relax Heat Treatment on the Performance of PET Fibers of HMLS
Investigation on the Effect of Properties of the Filler on the Efficiency of the Separation of Water-Petroleum Emulsions
Methods for Improving Slurry Ability of Yangchangwan Bituminous Coal
PIV Measurement of the Fluidized Particles' Velocity Field in a Cylindrical Spouted Bed
The Application Research of Concentration & Denitration Technology in Advanced Reprocessing Process
Application of Low Carbon Acid Compound Deplugging Technology
Study on Spectra and Mg-O Bond-Length of NaMg3Al(MoO4)5: Cr3+ Crystal at Low Temperature
Effect of Atmosphere and Holding Time on the Quality of Surface and Mechanical Properties of the Cold-Rolling Plate of Fe-42% Ni (4J42)
The Research of Oil-Shale-Dreg in Preparing Petroleum Proppant
The Polyetherification Modified Reaction on Silicone Oil
PVA-SA Immobilized White-Rot Fungus to Treat Papermaking Wastewater
Scaling Mechanism of Heat Exchanger for Spent Sulfuric Acid Concentrating in Titania Production
Process of Kraft Pulping of Fast-Growing Poplar and Defibration Point
Study on the Photoelectric Properties of CdSe/MS Composite Film and its Potential Application in Biosensor Field
Shear Property of Pb-Free Solder Joint According to Temperature Condition by SP and FEM
Chapter 8: Nanomaterials
Producing PVP Nanofibers by Electrospinning in N2
Surface Nanocrystallization of Nickel Produced by High-Current Pulsed Electron Beam Irradiation
Ultrasound-Aided Fabrication of Carbonated Silicon-Substituted HA Nanopowder and its Configuration Characterization
Preparation and Photocatalytic Activities of ?-Fe2O3/Sb-doped SnO2 (ATO) Nanocomposites
Size and Shape Separation of Ag Nanoparticles by a Continuous Density Gradient Centrifugation
A Novel Disinfection Material-Nano Ag Particle Impregnated Media
Effect of Nanofiber Diameter on Filtration Efficiency
A Mild Method Prepared Carboxy Carbon Nanocage
InGaAs Nanoflowers Grown by MOCVD
Fabrication of Microporous PVDF Particles by an Emulsion Method and Control of Pore Structure
Humidity Sensor Chips Based on Gold Nanoparticles/PVA/Carbon Black Composite Film
Enhanced Magnetoelectricity and Large Phonon Abnormality of Feather-Like CoFe2O4-BaTiO3 Nanostructures
Enhanced Magnetic Properties and Spin-Phonon Coupling of Single-Crystalline BiFeO3 Nanorods Prepared by Hydrothermal Technique
The Phase Structure of Novel Polycarbonate-Based Polyurethane-Organoclay Nanocomposites
Chapter 9: Materials Science
Preparation and Anti-Flame Capability of Expandable Graphite
Submerged Culture Optimisation for Triterpenoids Production by Inonotus obliquus Using Response Surface Methodology
Synthesis of Micro-Mesoporous Titanium-Silicon Molecular Sieve by Dual Templates Method
Effect of Dopants on the Microwave Magnetic Characteristics of FeCoBM-Al2O3 Soft Magnetic Thin Films
Composite and Real Hardnesses of Thin Coatings
Application of Composite Materials to Large Marine Hatch Cover
Electrical Studies on PZT Ceramic
Preparation and Characterization of Zn1-XMnxO Thin Films on SiO2 Substrates
Synthesis of Tb3+-Doped Ca-Deficient Hydroxyapatite and its Photoluminescence for White Light-Emitting Diode Application
Electrical Resistance Properties of Cement/Carbon Fiber Composite
Tribological and Corrosive Properties of Tin/AlN Multilayer Film
Modernization of "Polimir" Process of High-Pressure Polyethylene Production at "Tomskneftekhim" Company
Coupled Thermo-Mechanical FEA of Three-Roll Cross Rolling Process for Rings with Small-Hole and Deep Groove
Mixed Conducting Ceramic Capillary Membranes for Catalytic Membrane Reactors: Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-? Capillaries
The Synthesis and Electrochemical Performance of LiV3O8 Cathode with Lanthanum-Doped
Novel Anion Exchange Membranes from Poly(aryl ether)s with Quaternary Guanidinium Groups
Synthesis of the Cu/Flokite Catalysts and their Performances for Catalytic Wet Peroxide Oxidation of Phenol
Producing Microporous PMMA with Supercritical CO2 and the Research on its Properties
Poly(amic acid) Treatment on BaTiO3 and Effect on the Dielectric Properties of BaTiO3/Polyimide Composites
Low-Temperature Sintering Lead-Free Barium Titanate-Based X7P Ceramics with Bi2O3 Dopant and ZnO-B2O3 Flux Agent
Relaxor Properties and Tunability of Electron-Irradiated Thin Poly(vinlidene fluoride-trifluoroethylene) Copolymer Film
Modification Process of Carbon Fiber Reinforcement for Aluminum Matrix Composite
An Investigation of Absorption Spectra of Li2GeO3: Cr3+ Crystal
Ultrafiltration Treatment and Physical Properties of Ammonia Sulfite Pulping Liquor of Wheat Straw
Influence of Cr Valence State on Dielectric-Temperature Stability of Barium Titanate Ceramics
Study on the Characteristics of ThioPP Thin Films for Low-? Applications
An Analysis on the Effect of Fiber Entanglement in the Hydroentangled Nonwovens and the Initial Research of Influencing Factor
Chapter 10: Metal
Rapid Fabrication and Characterization of Micropores on Pure Nickel Surface by High-Current Pulsed Electron Beams Irradiation
Influence of Zn Content on the Microstructure and Properties of As-Annealed Al-Mn-Si Alloys
Influence of Aging Temperature on Microstructure and Creep Properties of Hot Continuous Rolled Ti-6Al-4V Alloy
Epoxy Resin Modified with PEDOT/PSS and Corrosion Protection of Steel
A Polycrystal Plasticity Model and its Application in Deep Drawing of a FCC Metal
Preparation and Oxygen Permeability of ReBaCo2O5+? (Re = Pr, Nd, Y) Ceramic Membranes
Anisotropy in Cold Deep Drawing of CP-Ti Sheet
Simulation of Ductile Fracture in an Aluminum Alloy Using Various Criteria
Effect of Strain Rate on Mechanical Behavior of Extruded AZ31B Magnesium Alloy under Tensile Deformation
Effects of Cooling Methods on Microstructure and Lattice Parameters of FGH95 Superalloy
Enhanced Ferromagnetism in Zn0.99Fe0.01O Modified by High Pressure
Surface Modification of Pure Titanium by High Current Pulsed Electron Beam
Anisotropy of Mechanical Properties and Microstructure Evolutions of Tensile AZ80 Magnesiumat Room Temperature
Pore Size Dependence of Compressive Behavior and Energy Absorption Properties of Porous Copper
Influence of Substituting La with Pr on Electrochemical Characteristics of RE-Mg-Ni-Based A2B7-Type Alloys Prepared by Melt Spinning
Electrochemical Cycle Stability and Kinetics of the As-Cast and Spun La0.75?xZrxMg0.25Ni3.2Co0.2Al0.1 (x = 0-0.2) Alloys
Preparation and Characterization of MWCNTs-TiO2: Ce/Fe Photocatalyst
Dephosphorization Ability Estimation of FetO-Rich Demanganization Slag during Hot Metal Pre-Treatment
Evaluation of A-TIG Flux on Dissimilar Welds between Mild Steel and Stainless Steel
Preparation of Al/SiO2 Composite Coatings on the Surface of Aluminum Alloy through Atmospheric Plasma Spraying
Simulation Analysis of Springback for Lead Frame Copper Alloy
Improving the Properties of Magnetic Bearing Shaft Material by HVOF Coating of WC-Metal Powder and Laser Heat Treatment
Influence of Carbon Content on the Solid-State Shrinkage and Expansion of Carbon Steel
The Oxidation of Co-5Si Alloys in 1 atm of Pure O2 at 700 and 800 degreesC
Oxidation Behavior of Ternary Co-10Cr-5Al Alloys at 700 and 800 degreesC
Hot Compressive Behavior of Ti-3.0Al-3.7Cr-2.0Fe Titanium Alloy at Different Strain Rates
Fabrication and Damping Properties of Porous Cu
Preparation and Characterization of Blackening Films in Steel Surface
Chapter 11: Application of Modeling
Simulation of the Mixing in a Novel Fully Wiped Co-Rotating Non-Twin Screws
3-D Coupled Thermo-Mechanical FE Modelling and Simulation of Combined Ring Rolling
Modeling and Calculation of Initial Ignition Gas Pressure Flow through the Rigid Porous Media in 100 mm Ignition Simulator
Molecular Dynamics Simulation of the Mechanical Properties of NR/TPI
Mass Transfer Model for Coated Urea Particle in Controlling-Release Process
The Chemical Kinetic Numerical Computation and Kinetic Model Parameters Estimating of Parallel Reactions with Different Reaction Orders
Multiscale Computational Model of Nitride Semiconductor Nanostructures
Molecular Dynamic Simulation for Co Cluster Deposition on Si Substrate
Heat Transfer of Bottom Tubes in Delayed Coking Furnace: Simulation and Measurement
Data Collection for Power Generator Condition Monitoring by Chemical ?Analysis of Cooling Gas
Simulation of Vacuum Rotating Dryer to Dry Caffeine Colloid
Numerical Investigation of Hydrodynamic Behaviors in Gas-Solid Magnetic Fluidized Beds
Second-Order Kinetic Model for the Sorption of Cu(II) Ions in Aqueous Solutions of Zeolite NaA
Flash-Point Prediction of Binary Partially Miscible Aqueous-Organic Mixtures from UNIFAC Group Contribution Methods
Numerical Simulation of Natural Convection in a Two-Dimensional Enclosure Filled with Nanofluids
The Detectable Radius of an Oil Well Considering Pressure Gauge Resolution Ratio