Material Sciences and Technology

<ul><li>Preface</li><li>Chapter 1: Analytical Chemistry</li><li>Crystallization Behavior of Heat-Treated Basalt Fiber</li><li>Preparation and Characterization of Highly Monodisperse Vinyl Functionalized Silica Spheres by Sol-Gel Method</li><li>Pseudo-Elastic Behavior of NiTi SMA under the Quasi-Static and the Impact Cyclic Tests</li><li>Calculation for Precise Determination of Adsorption Equilibrium Isotherms of Pollutants on Soil and Bio-Sorbents</li><li>FT-IR Studies of Acid Properties of Physically Mixed Mo/HZSM-5 Catalysts for Methane Dehydroaromatization</li><li>Measurement and Correlation of Solubilities and Surface Tension of Caffeine in Water</li><li>The Microscopic Mechanism of Compton Scattering of Some Saline Solutions</li><li>Phase Structure of Acrylic Fibers Processed with Ionic Liquid as Solvent</li><li>Feed Rate on Velocity Field of Liquid Film in a Wiped Film Molecular Distillatory</li><li>Some Properties and Detection Methods of Paper Sludge</li><li>Theoretical Investigation of Mechanism by Oxidizing Material for Carbon Dioxide Reforming of Methane over Platinum Catalyst</li><li>Structural Study of Bisphenol-A Benzoxazine by Tandem Mass Analysis</li><li>Study on the Structure and Surface Acoustic Wave Properties of KDP and ADP Crystals</li><li>Chapter 2: Physical Chemistry</li><li>Modeling of Nitrogen Adsorption Process in a 5A Zeolite Pellet</li><li>Isobaric Vapor-Liquid Equilibria for the System Containing Acetic Acid at 101.3kPa</li><li>Study on Thermophysical Properties of Partially Oxidized Polymer Derived SiC Composites</li><li>Asymmetric Heat Transfer of Deformation on Frictional Surface of Mechanical Seals</li><li>Effect Factors of SHS Combustion System in Thermit Welding</li><li>The Diffusion Kinetics Equation of Microwave-Assisted Extraction</li><li>Fire Performances, Hot Properties and Decomposition Kinetics of Sb₂O₃/DBDPE/RTV</li><li>The Permeation and Swelling Behaviors between DMC, DEC, PC, EC and P(VDF-<i>co</i>-HFP)</li><li>Thermal Properties of Carbon/Epoxy Resin Composites Based on the Template of Artificial Sponge</li><li>The Study of Fe-Based Broad Amorphous Ribbon's Variable-Temperature Kinetics</li><li>Irreversible Thermodynamic Description of Domain Occurrences in Ferroics</li><li>Auto-Ignition Temperature Data for Selected Ketones</li><li>Effect of Particle Size on the Zener Limit: A Monte Carlo Simulation Approach</li><li>Comparative Experimental Study on Performance of Corrugated Tube and Straight Tube Heat Exchanger</li><li>Fire and Thermal Hazard Analyses of Industrial Zeolite Catalysis for Phenol Production</li><li>Chapter 3: Organic Chemistry</li><li>Thermal Stabilization of ?-Al₂O₃ with Modification of Polyethylene Glycol by Reverse Precipitation Method</li><li>Synthesis and Characterization of a Novel Hyperbranched Poly(Diethynylbenzene-Silane)</li><li>Thermal and Oxidation Behavior of Boron-Silicon-Containing Arylacetylene Polymer</li><li>Kinetics of Epoxidation of Vegetable Oils Catalyzed by Formic Acid, Peroxophosphatotungstate and Methyltrioxorhenium</li><li>The Microwave Synthesis and Photocatalytic Activity of Silver Vanadate</li><li>Purification of Acetonitrile</li><li>Methodology for the Study of Vacuum Gas Oil Hydrocracking Catalysts in a Batch Reactor - Coupling of GC-2D Data with Vapour-Liquid Equilibrium</li><li>Synthesis of 5-Acetylacenaphthene Using Silica-Supported Phosphotungstic Heteropoly Acid as an Efficient and Reusable Catalyst</li><li>Preparation of Poly (aryl ether) Anion Ionomers with N-Methyl Imidazolium Groups</li><li>The Effect of CaCl₂ on the Solution Behavior of Aromatic Polysulfonamide in Dimethylformamide</li><li>Characterization and Antioxidant Activities of Polysaccharides from <i>Fructus corni</i></li><li>Effect of pH on the Phosphorous Components in Tetra-Hydroxymethyl Phosphonium Chloride Solution</li><li>Synthesis of Wood Lignin-Urea-Formaldehyde Resin Adhesive</li><li>Chapter 4: Inorganic Chemistry</li><li>Thermal Treatment of New Inorganic Thermal Insulation Board Based on Expanded Perlite</li><li>Qⁿ Distribution in Silicates: Alkali Silicate Glasses and Melts</li><li>Preparation of Precursor of LiNi_0.5Mn_1.5O₄ with High Density by Two-Dryness Co-Precipitation Method</li><li>Effect of Synthesis Time on Microscopic Characteristics of 12CaO?7Al₂O₃</li><li>Preparation of Carbon Micro-Spheres from Liquefaction Products of Lignite with NaOH-Methanol</li><li>Chapter 5: Catalytical Chemistry</li><li>Synthesis of (R)-(-)-Mandelic Acid Ethyl Ester by Asymmetric Reduction of Ethyl Benzoylformate with Yeast Cells</li><li>Hierarchical Control Based Virtual Coordinated Synchronization of Chemical Auto Catalytic Reaction Networks</li><li>Preparation, Characterization of Co₃O₄ Nano-Particles and its Catalytic Effect on the Combustion of Fuel Rich Propellants</li><li>Preparation of Pt-Sn-K/Al₂O₃ Catalysts and its Catalytic Performance in Propane Dehydrogenation</li><li>One-Pot Synthesis of 1-Benzoylpyrene over Heteropoly Acid Catalysts</li><li>Preparation and Catalytic Properties of Zn-HMS Molecular Sieves</li><li>Comparative Study of p-nitrophenyl picolinate Hydrolysis Catalyzed by Bis(O,O'-di(2-phenylalkyl)dithiophosphate) nickel(II)</li><li>The Reaction Scheme of Partial Oxidation of Methane to Synthesis Gas over Metallic Ni Catalyst</li><li>A Study on Catalytic Hydrolysis of Corncob by Formic Acid</li><li>Study on Making Low Density Printing Paper with Aspen BECMP as the Main Pulp</li><li>Chapter 6: Biochemistry</li><li>Kinetic Resolution of Ethyl-2-hydroxy-4-phenylbutyrate with Lipase AK as Catalyst</li><li>Abnormal Structural Strength of Topocomposites</li><li>Effect of Aging Treatment on Mechanical Properties and Electrical Conductivity of Cu-5.7%Cr <i>In Situ</i> Composite Produced by Equal Channel Angular Pressing</li><li>Study on the Optimization of Extraction Technology of Flavonoids in<i> Clerodendrum inerme</i>(L.) Gaertn. Roots</li><li>The Application of Cellular Automata in the Dumping Site Analysis</li><li>Physical Properties and Antimicrobial Activities of Soy Protein Isolate Edible Films Incorporated with Essential Oil Monomers</li><li>Puri?cation and Characterization of a Yam Glycoprotein Isolated by Alkaline Extraction from Yam Tuber</li><li>Antitumor Activity and Possible Mechanism of Crude Polysaccharides from <i>Discorea bulbifera</i> L. on the Mice Bearing U14 Cervical Carcinoma</li><li>Effect of the Chitosan on the Proliferation of the Microencapsulated <i>Escherichia coli</i></li><li>Effect of Antimycin A on the Glycolytic Flux in <i>Aspergillus niger</i></li><li>Development of a New Adhesive Reagent for Shell Mold Having High Adhesive Strength</li><li>Levitated Drop Microreactors for Biochemical Kinetics</li><li>Biomimetic Pattern Recognition Method for Breast Cancer Using Gene Expression Data</li><li>Preparation of N, O-carboxymethyl chitosan-Human-Like Collagen Microspheres for Drug Delivery</li><li>Comparative Evaluation of the Chemical Composition of Essential Oil from Different Parts of <i>Ficus microcarpa</i></li><li>Comparative Evaluation of Total Flavonoid Contents in Different Parts of <i>Ficus microcarpa</i></li><li>Auto-Catalytic Ethanol Pulping of Corncob Acid Hydrolyzed Residua</li><li>Preparation and Characterization of Cefradine/Montmorillionite Composites</li><li>Chapter 7: Applied Chemistry</li><li>The Reduction Mechanism of Biomass Roasting of Goethite Ores</li><li>Separation Test of Refractory Lead-Zinc Ore from Myanmar</li><li>Incoherent UV/VIS Lasers Assisted Surface Relief Grating Formation</li><li>Synthesis and Size Control of Monodisperse Silica Sol Nanospheres via a Modified Stoeber Method</li><li>Discussion and Analysis on the Fungus, Humidity and Salt Fog Environmental Test</li><li>Separation of Gallium from Aluminum in Fly Ash Digested Solution by Soda-Lime Sintering Process</li><li>Hemicellulose-Based Porous Hydrogel for Methylene Blue Adsorption</li><li>Effect of Electrochemical Synthesis Conditions on Capacitor Performance of Polyaniline Electrodes</li><li>Selective Leaching Nickel from the Pre-Reduced Limonitic Laterite Ore at Atmospheric Pressure</li><li>Calcium Doping Effects on the Electrochemical Properties of LiFePO₄/C Cathode Materials for Lithium-Ion Batteries</li><li>The Impact of Offset Paper on Ink Transfer Rate and Ink Absorption Rate</li><li>Development of Technology of Suspension Polymerization of Propylene at "Tomskneftekhim" Company</li><li>Rapid and Efficient Coupling Reaction of Azo Dyes in a Continuous-Flow Microreactor</li><li>Spark Mixtures for Fireworks</li><li>Modernization of Production of High-Purity Quartz Groats from Natural Quartz</li><li>Response Surface Methodology (RSM) for Wastewater Flocculation by a Novel (AlCl₃-PAM) Hybrid Polymer</li><li>Hydroprocessing of Crude Palm Oil to Bio-Diesel Using Mesoporous Catalysts</li><li>Study on the Extraction Technique of Poly-methoxyflavonoids from Citrus Peels by Using Response Surface Methodology</li><li>The Effect of Oxygen-Functional Groups on the Water Resistance of Lignite Briquette</li><li>Production of Biodiesel in Supercritical Methanol and Related Correlation on Phase Equilibrium</li><li>Epoxy Resins Treated with Novel Silicon-Containing Flame Retardant</li><li>Flame Retardant Epoxy Resins Containing Bisaryl Diphosphates Oligomer</li><li>Mechanism and Application Performance of Slow-Release Polycarboxylate Superplasticizer</li><li>Synthesis and Properties of Lightweight Geopolymer using Ash from Thermal Power Plants</li><li>Preparation of SiO₂/PEG Shear Thickening System by Centrifugal Dispersion</li><li>Preparation of Cationic Polyacrylamide Flocculant and its Application in the Treatment of Coal Slurry Wastewater</li><li>The Analyses of Lignin Structure and Molecular Weight Distributions of Small Fractions from Hardwood Dissolved Alkali Lignin</li><li>Study on Properties of Porous Ecological Concrete for Plant-Growing in China</li><li>The Axial Distribution of Gas Hold-Up and Solid Concentration in Slurry Reactor and its Effect to the Design of Slurry Reactor</li><li>Effect of Relax Heat Treatment on the Performance of PET Fibers of HMLS</li><li>Investigation on the Effect of Properties of the Filler on the Efficiency of the Separation of Water-Petroleum Emulsions</li><li>Methods for Improving Slurry Ability of Yangchangwan Bituminous Coal</li><li>PIV Measurement of the Fluidized Particles' Velocity Field in a Cylindrical Spouted Bed</li><li>The Application Research of Concentration & Denitration Technology in Advanced Reprocessing Process</li><li>Application of Low Carbon Acid Compound Deplugging Technology</li><li>Study on Spectra and Mg-O Bond-Length of NaMg₃Al(MoO₄)₅: Cr³⁺ Crystal at Low Temperature</li><li>Effect of Atmosphere and Holding Time on the Quality of Surface and Mechanical Properties of the Cold-Rolling Plate of Fe-42% Ni (4J42)</li><li>The Research of Oil-Shale-Dreg in Preparing Petroleum Proppant</li><li>The Polyetherification Modified Reaction on Silicone Oil</li><li>PVA-SA Immobilized White-Rot Fungus to Treat Papermaking Wastewater</li><li>Scaling Mechanism of Heat Exchanger for Spent Sulfuric Acid Concentrating in Titania Production</li><li>Process of Kraft Pulping of Fast-Growing Poplar and Defibration Point</li><li>Study on the Photoelectric Properties of CdSe/MS Composite Film and its Potential Application in Biosensor Field</li><li>Shear Property of Pb-Free Solder Joint According to Temperature Condition by SP and FEM</li><li>Chapter 8: Nanomaterials</li><li>Producing PVP Nanofibers by Electrospinning in N₂</li><li>Surface Nanocrystallization of Nickel Produced by High-Current Pulsed Electron Beam Irradiation</li><li>Ultrasound-Aided Fabrication of Carbonated Silicon-Substituted HA Nanopowder and its Configuration Characterization</li><li>Preparation and Photocatalytic Activities of ?-Fe₂O₃/Sb-doped SnO₂ (ATO) Nanocomposites</li><li>Size and Shape Separation of Ag Nanoparticles by a Continuous Density Gradient Centrifugation</li><li>A Novel Disinfection Material-Nano Ag Particle Impregnated Media</li><li>Effect of Nanofiber Diameter on Filtration Efficiency</li><li>A Mild Method Prepared Carboxy Carbon Nanocage</li><li>InGaAs Nanoflowers Grown by MOCVD</li><li>Fabrication of Microporous PVDF Particles by an Emulsion Method and Control of Pore Structure</li><li>Humidity Sensor Chips Based on Gold Nanoparticles/PVA/Carbon Black Composite Film</li><li>Enhanced Magnetoelectricity and Large Phonon Abnormality of Feather-Like CoFe₂O₄-BaTiO₃ Nanostructures</li><li>Enhanced Magnetic Properties and Spin-Phonon Coupling of Single-Crystalline BiFeO₃ Nanorods Prepared by Hydrothermal Technique</li><li>The Phase Structure of Novel Polycarbonate-Based Polyurethane-Organoclay Nanocomposites</li><li>Chapter 9: Materials Science</li><li>Preparation and Anti-Flame Capability of Expandable Graphite</li><li>Submerged Culture Optimisation for Triterpenoids Production by<i> Inonotus obliquus</i> Using Response Surface Methodology</li><li>Synthesis of Micro-Mesoporous Titanium-Silicon Molecular Sieve by Dual Templates Method</li><li>Effect of Dopants on the Microwave Magnetic Characteristics of FeCoBM-Al₂O₃ Soft Magnetic Thin Films</li><li>Composite and Real Hardnesses of Thin Coatings</li><li>Application of Composite Materials to Large Marine Hatch Cover</li><li>Electrical Studies on PZT Ceramic</li><li>Preparation and Characterization of Zn_1-XMn_xO Thin Films on SiO₂ Substrates</li><li>Synthesis of Tb³⁺-Doped Ca-Deficient Hydroxyapatite and its Photoluminescence for White Light-Emitting Diode Application</li><li>Electrical Resistance Properties of Cement/Carbon Fiber Composite</li><li>Tribological and Corrosive Properties of Tin/AlN Multilayer Film</li><li>Modernization of "Polimir" Process of High-Pressure Polyethylene Production at "Tomskneftekhim" Company</li><li>Coupled Thermo-Mechanical FEA of Three-Roll Cross Rolling Process for Rings with Small-Hole and Deep Groove</li><li>Mixed Conducting Ceramic Capillary Membranes for Catalytic Membrane Reactors: Performance of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-? Capillaries</li><li>The Synthesis and Electrochemical Performance of LiV₃O₈ Cathode with Lanthanum-Doped</li><li>Novel Anion Exchange Membranes from Poly(aryl ether)s with Quaternary Guanidinium Groups</li><li>Synthesis of the Cu/Flokite Catalysts and their Performances for Catalytic Wet Peroxide Oxidation of Phenol</li><li>Producing Microporous PMMA with Supercritical CO₂ and the Research on its Properties</li><li>Poly(amic acid) Treatment on BaTiO₃ and Effect on the Dielectric Properties of BaTiO₃/Polyimide Composites</li><li>Low-Temperature Sintering Lead-Free Barium Titanate-Based X7P Ceramics with Bi₂O₃ Dopant and ZnO-B₂O₃ Flux Agent</li><li>Relaxor Properties and Tunability of Electron-Irradiated Thin Poly(vinlidene fluoride-trifluoroethylene) Copolymer Film</li><li>Modification Process of Carbon Fiber Reinforcement for Aluminum Matrix Composite</li><li>An Investigation of Absorption Spectra of Li₂GeO₃: Cr³⁺ Crystal</li><li>Ultrafiltration Treatment and Physical Properties of Ammonia Sulfite Pulping Liquor of Wheat Straw</li><li>Influence of Cr Valence State on Dielectric-Temperature Stability of Barium Titanate Ceramics</li><li>Study on the Characteristics of ThioPP Thin Films for Low-? Applications</li><li>An Analysis on the Effect of Fiber Entanglement in the Hydroentangled Nonwovens and the Initial Research of Influencing Factor</li><li>Chapter 10: Metal</li><li>Rapid Fabrication and Characterization of Micropores on Pure Nickel Surface by High-Current Pulsed Electron Beams Irradiation</li><li>Influence of Zn Content on the Microstructure and Properties of As-Annealed Al-Mn-Si Alloys</li><li>Influence of Aging Temperature on Microstructure and Creep Properties of Hot Continuous Rolled Ti-6Al-4V Alloy</li><li>Epoxy Resin Modified with PEDOT/PSS and Corrosion Protection of Steel</li><li>A Polycrystal Plasticity Model and its Application in Deep Drawing of a FCC Metal</li><li>Preparation and Oxygen Permeability of ReBaCo₂O_5+? (Re = Pr, Nd, Y) Ceramic Membranes</li><li>Anisotropy in Cold Deep Drawing of CP-Ti Sheet</li><li>Simulation of Ductile Fracture in an Aluminum Alloy Using Various Criteria</li><li>Effect of Strain Rate on Mechanical Behavior of Extruded AZ31B Magnesium Alloy under Tensile Deformation</li><li>Effects of Cooling Methods on Microstructure and Lattice Parameters of FGH95 Superalloy</li><li>Enhanced Ferromagnetism in Zn_0.99Fe_0.01O Modified by High Pressure</li><li>Surface Modification of Pure Titanium by High Current Pulsed Electron Beam</li><li>Anisotropy of Mechanical Properties and Microstructure Evolutions of Tensile AZ80 Magnesiumat Room Temperature</li><li>Pore Size Dependence of Compressive Behavior and Energy Absorption Properties of Porous Copper</li><li>Influence of Substituting La with Pr on Electrochemical Characteristics of RE-Mg-Ni-Based A₂B₇-Type Alloys Prepared by Melt Spinning</li><li>Electrochemical Cycle Stability and Kinetics of the As-Cast and Spun La_0.75?xZr_xMg_0.25Ni_3.2Co_0.2Al_0.1 (x = 0-0.2) Alloys</li><li>Preparation and Characterization of MWCNTs-TiO₂: Ce/Fe Photocatalyst</li><li>Dephosphorization Ability Estimation of Fe_tO-Rich Demanganization Slag during Hot Metal Pre-Treatment</li><li>Evaluation of A-TIG Flux on Dissimilar Welds between Mild Steel and Stainless Steel</li><li>Preparation of Al/SiO₂ Composite Coatings on the Surface of Aluminum Alloy through Atmospheric Plasma Spraying</li><li>Simulation Analysis of Springback for Lead Frame Copper Alloy</li><li>Improving the Properties of Magnetic Bearing Shaft Material by HVOF Coating of WC-Metal Powder and Laser Heat Treatment</li><li>Influence of Carbon Content on the Solid-State Shrinkage and Expansion of Carbon Steel</li><li>The Oxidation of Co-5Si Alloys in 1 atm of Pure O₂ at 700 and 800 degreesC</li><li>Oxidation Behavior of Ternary Co-10Cr-5Al Alloys at 700 and 800 degreesC</li><li>Hot Compressive Behavior of Ti-3.0Al-3.7Cr-2.0Fe Titanium Alloy at Different Strain Rates</li><li>Fabrication and Damping Properties of Porous Cu</li><li>Preparation and Characterization of Blackening Films in Steel Surface</li><li>Chapter 11: Application of Modeling</li><li>Simulation of the Mixing in a Novel Fully Wiped Co-Rotating Non-Twin Screws</li><li>3-D Coupled Thermo-Mechanical FE Modelling and Simulation of Combined Ring Rolling</li><li>Modeling and Calculation of Initial Ignition Gas Pressure Flow through the Rigid Porous Media in 100 mm Ignition Simulator</li><li>Molecular Dynamics Simulation of the Mechanical Properties of NR/TPI</li><li>Mass Transfer Model for Coated Urea Particle in Controlling-Release Process</li><li>The Chemical Kinetic Numerical Computation and Kinetic Model Parameters Estimating of Parallel Reactions with Different Reaction Orders</li><li>Multiscale Computational Model of Nitride Semiconductor Nanostructures</li><li>Molecular Dynamic Simulation for Co Cluster Deposition on Si Substrate</li><li>Heat Transfer of Bottom Tubes in Delayed Coking Furnace: Simulation and Measurement</li><li>Data Collection for Power Generator Condition Monitoring by Chemical ?Analysis of Cooling Gas</li><li>Simulation of Vacuum Rotating Dryer to Dry Caffeine Colloid</li><li>Numerical Investigation of Hydrodynamic Behaviors in Gas-Solid Magnetic Fluidized Beds</li><li>Second-Order Kinetic Model for the Sorption of Cu(II) Ions in Aqueous Solutions of Zeolite NaA</li><li>Flash-Point Prediction of Binary Partially Miscible Aqueous-Organic Mixtures from UNIFAC Group Contribution Methods</li><li>Numerical Simulation of Natural Convection in a Two-Dimensional Enclosure Filled with Nanofluids</li><li>The Detectable Radius of an Oil Well Considering Pressure Gauge Resolution Ratio</li></ul>