Eco-Materials Processing and Design XII

Preface, Organizing Committee and Sponsors
A. Materials for Environment Preservation, Energy Conservation and New Energy
Barium-Free Glass-Ceramic Sealants from the System CaO-MgO-B2O3-Al2O3-SiO2 for Application in the SOFC
Fuel Gases from Gasification Process of Glass Fiber/Epoxy Composite Waste
A Study on the Characteristics of the Polycrystalline Silicon Annealed by the SHG Nd:YAG Laser
Adsorption Mechanism of Copper(II) Ions on Expansion-Treated Rice Husk
Photoemission and Energy Gap of CdS Synthesized by Solid State Microwave-Plasma
Cu (II)-Containing Micro-Arc Oxidation Ceramic Layers on Aluminum: Formation, Composition, and Catalytic Properties
Effects of Annealing Conditions on Morphology and Permeability of Palladium Membrane
Fixed-Bed Column Study for Zn (II) Removal from Solution Using Expanding Rice Husk
Graft Copolymerization of Soybean Protein Isolate and Methyl Methacrylate
Nano Composite Membranes of Sulfonated Poly(ether sulfone) Containing 4,4-Bis(4-hydroxylphenyl)valeric Acid and SiO2 for PEMFC
Preliminary Studies on the Preparation of New-Style White Mud / KGM Membrane
Preparation and Characterization of Sulfonated Imide-Grafted Poly(ethersulfone)s
Fabrication of Bi0.5Na0.5ZrO3 Powder by Mixed Oxide Method
Preparation, Electrochemical Properties and Cytotoxicity Assessment of Nanosized CuO/La2O3/CeO2 Composite for the Decomposition of Gaseous Ammonia
Sol-Gel Derived La0.56Sr0.4Co0.2Fe0.8O3-? Cathodes for IT-SOFC Applications
Study on the Reaction of Acetylated Konjac Glucomannan and EVA during Processing
Synthesis and Thermoelectric Properties of Co4-XFeXSb12-YSnY Skutterudites
Synthesis and Thermoelectric Properties of Undoped Half-Heusler Zr-Co-Sb Alloy Processed by Mechanically Alloying and Hot Pressing
The Adsorption of Cd(II) Ions on Sodium Hydroxide-Treated Bamboo Powder
The Studies of Adsorption of Heavy Metal Ions of Lead andCopper by Distillers' Grains
The Properties of ZnO Nanorods for Organic-Inorganic Solar Cell Fabricated by Wet Chemical Method
Effect of Membrane Material Properties on Efficiency of Membrane Distillation
B. Materials Processing Technologies for Reduction of Environmental Impact
Influences of Atomizing Pressure on Properties and Microstructure at Brazed Joint of Lead-Free Solder Powder
Analysis of Fiber Filter Media after 6 Years of Use as a First Flush Filter
Application of Acid Modified CuO/Al2O3 Nanostructured Catalysts and its Cytotoxicity Assessment for Enhanced CH4-SCR Performance
Catalytic Oxidation of Toluene over Fe2O3/Al2O3 Catalyst
Characterization of CuO/ZnO/Al2O3 Catalyst for Methanol Synthesis
Comparison of Sonochemistry Method and Sol-Gel Method for the Fabrication of TiO2 Powder
Environmentally Benign Microwave-Assisted Sonogashira Preparation of Aromatic Compounds
Adsorption Studies of Nitrobenzene onto Aminated Lignin
Immobilization of Iron Tetrasulfophthalocyanine on MCF-NH2 and MCM-41 Mesoporous Silicas
Photocatalytic Activities of Transition Metal-Doped TiO2 Nano-Powders by Sonochemical Method and their Physicochemical Properties
Photocatalytic Decolorization of Methylene Blue by Ferric Stearate, Ferrocene and NiDBC under Sunlight Irradiation
Reaction Synthesis of TiAl/Ti2AlC In Situ Composites
Relationship between Chemical Composition and the Amount of Phosphorus Adsorbed
Separation of Cobalt from Zinc Sulfate Solution by Novel Oxidant
Study on the Roller-Bending Simulation to Promote Productivity in the HINGE STRAP Forming System
Texture Development in Cold Rolled and Annealed Ta
Theoretical Study for the Interaction of Chitosan and Sulfate
Effect of Annealing on the Properties of Surface Nanocrystallized CP-Ti
Structure and Dielectric Properties of Bi0.5K0.5TiO3-SrTiO3 Lead-Free Ceramics
C. Eco-Materials Processing and Design
Effect of Microcrystalline Cellulose from Banana Stem Fiber on Mechanical Properties and Crystallinity of PLA Composite Films
Size Reduction of Gold Nanoparticles by Pulsed Laser Ablation and Re-Irradiation in Water Media
Reactive Compatibilization of Polylactide, Thermoplastic Starch and Poly(butylene adipate-co-terephthalate) Biodegradable Ternary Blend Films
Structure and Mechanical Properties of AlCrN Thin Films Deposited by Magnetron Sputtering
Processing and Properties of Amorphous Magnesium-Based Eco-Materials
Effect of Artificial Aging on Aluminum Extrusion Alloy for Automobile Bumper
A Study of Photo and Photocatalytic Degradation of Arylamine with Respect to Design of Organic Light-Emitting Diode
Effect of Sodium Carbonate Addition on the Property and Formation of Terracotta Panel
Analysis of Laser and Resistance Spot Weldments on Press-Hardened Steel
Control of Microstructure and Texture for Mechanical Properties of Mg-Al-Zn Alloys
Cu Particles Deposition onto MWCNTs by Chemical Reaction
Debundling of Single Walled Carbon Nanotubes by HPC in 1-Propanol and Water
Development of Novel Filter Materials for the Treatment of First-Flush Rainwater
Eco-Glass Based on Thailand Quartz Sands and Bismuth Oxide
Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3/TiAl In-Situ Composites
Effects of Fabricated Method on the Coefficient of Friction of Al2O3-15 wt% ZrO2-3 wt% Solid Lubricant Composites
Effect of Particle Size Distribution on the Workability of Alumina-Based Castable Refractories
Effect of Heat Treatment Temperature and Atmosphere on Micro Structure of Polyphenylcarbosilane
Effects of Physical Melt Treatments on Microstructural Evolution and Anodizing Characteristics of Al-Si Casting Alloys
Evaluation of Crack Sensitivity and Gap Bridging Ability during Laser Butt Welding of Aluminum 5J32 and 6K21 Alloys
Preparation and Hydrogen Permeation on Al2O3-CuO-ZnO (ACZ)/Co Membrane by Hot Press Sintering (HPS)
Fabrications and Evaluations of Hydrogen Permeation on Al2O3-CuO-ZnO(ACZ)/Pd Coated Membrane
Fabrications and Evaluations of Hydrogen Capacities on MgHX-Transition Metal Oxide(TMO) Composites by Mechanical Alloying
Improvement of Strength of Lotus-Type Porous Aluminum through ECAE Process
Influence of Raw Materials on the Preparation of Terracotta Panel
Influence of Volume Fraction of Bainite on Mechanical Properties of X80 Pipeline Steel with Excellent Deformability
Mechanical Behaviors and Texture Development of the Extruded Magnesium AZ31 Alloys
Pigment Printing of Natural Dye from Red Mangrove Bark on Silk Fabrics
Pollutant Decomposition in Micro Porous Ceramics Made Out of Volcanic Rocks
Strength Enhancement of Bottom Ash-Based Concretes Using Metakaolin
Study on the Artificial Lightweight Aggregate by Using Reject Ash, Dredged Soil, and Ferrous Materials
Synthesis and Formation Mechanism of Mn-Doped Zn2SiO4 Brown Pigment
Synthesis of Co-Doped Tialite Ceramic Pigments and Coloring in Glazes
Synthesis of Perovskite Brown Pigments
D. High Performance Materials Including Nano-Materials for the Environment
Effects of Strain Rate in Cold-Rolled Pure Copper Produced by Different Rolling Processes
Preparation of SiC Whiskers by Microwave Heating
Synthesis and Characterization of Block Copolymer from Natural Rubber, Toluene-2,4-Diisocyanate and Poly(?-aprolactone) Diol-Based Polyurethane
Synthesis and Characterization of Triglyceride-Based Copolymer from Soybean Oil
Effect of MgO Coating on the Hydration Resistance of MgO-CaO Clinkers
Preparation of Ca-?-Sialon-SiC Multiphase Ceramics from Gasification Slag
Rubber Blend of 80/20 NR/SBR Reinforced with Nanosilica and PS-Encapsulated Nanosilica
Electrochemical Synthesis of Sensitive Layer of Polyaniline/Multi Wall Carbon Nanotube Composite
A Homogeneous Solidification Criterion for Undercooled Ni-20at%Pb Hypermonotectic Melts
Research on the Optimization of Ni/Si Atomic Ratio for Cu-Ni-Si Alloys with High Strength and High Electrical Conductivity
Oxidation Behavior of As-Forged Fe-25wt%Cr Alloys at 1100 degreesC in Air
Hydrogen Variation in Molten Steel during LF Refining
Microstructure and Magnetic Properties of Undercooled Fe-50at%Ni Alloys
Artificial Neural Network to Predict the Hot Deformation Behavior of Super 13Cr Martensitic Stainless Steel
Oxidation Behaviors of Pure Ti Thermal Plasma Spray Coated Mo-Si-B Alloys
Esterification of Chemical Functional Single-Wall Carbon Nanotubes
Development of Carbon Nanotube - Reinforced Silk and Cannabis Fibers by an Electrophoretic Deposition Method
Constitutive Equation Development for Large Strain Rate Deformation Processing of 2205 Duplex Stainless Steels
Investigation of Fabrication and Microstructure of the Fe3Al/Al2O3 Composites by Hot-Pressing Process
Effect of Ag Addition on the Microstructure and Mechanical Properties of High Conductivity Cu-1Cr-Mg-P Alloy
Fabrication and Cytotoxicity Studies of the TiO2 Doped with Copper-Based Nanocomposite Particles
Effect of Alloying Elements on the Corrosion Wear Behaviors of Low Chromium Cast Iron
Using GA-ANN to Optimize Heat Treatment Technological Parameters of Super-Martensitic Stainless Steel
Effect of Heat Treatment on the Microstructural Characteristics of IN738 Turbine Blade
Effect of Oxide Additives on Catalysis and Microstructure of RBSN Using Low-Purity Silicon Powder as Raw Materials
Growth of Flower-Like AIN by Combustion Synthesis Assisted with Mechanical Activation
A Study on Mechanical and Tribological Properties of Hot Pressed Al2O3/ZrO2/h-BN/TiO2 Composites
Separability of Fe from Cyanide Tailing by Magnetic Roasting
Studies on Corrosion Behavior of S-165 and HP Supermartensitic Stainless Steels in Cl- Environment
Synthesis and Characterization of Flower-Sphere MoS2
Synthesis of High-Purity Ti3SiC2 by Infiltration-Sintering
Synthesis of Ti(C,N)/Al2O3 by Mechanically Induced Self-Propagating Reactive Synthesis
Investigation of Thermal Sprayed Stainless Steel/WC-12wt%Co Nanocomposite Coatings
Ultrasound-Enhanced Electrochemical Preparation of Atomic Oxidants
Effect of Annealing on Ag-Doped Submicron Silica Powder Prepared with Modified Stoeber Method
Influencing of Ca-Based Sorbent on the Sulfur Retention
E. Hybrid Materials and Composites for ECO Society
Effect of Melt Treatment on Forming and Brazing Characteristics of 4343/3003/4343 Aluminum Clad Sheet
Comparative Study on the Effects of Different Molecular Weight Polyethylene Powders in Soil
Study on Microstructure and Impact Strength of Nano-SiO2 Toughened Epoxy Resin Composites
Surface and Mechanical Properties of Cellulose Micro-Fiber Reinforced Recycle Polyethylene Film
Pulsed Electric Current Sintering of the Al2O3 - 15wt% ZrO2 Nanocomposites with 3wt% of Different Solid Lubricants
The Effects of Aging Treatment on the Strength and Conductivity of Cu-Ag-Zr-Co Alloy
Laboratory Evaluation of Ultraviolet Radiation for Asphalt Pavement Performance in Desert Regions
F. Photocatalysis for a Better Environment and Clean Energy
Doted Titania(B) Nanobelts with Anatase Nanocrystals for Improved Photocatlytic Activity
Preparation of Nanocrystalline W-Doped TiO2 Powders and their Photocatalytic Properties under Visible Light Irradiation
Pyrolysis Characteristics and Kinetics of Low Rank Coal
Visible Light Responsive Titanium Dioxide Photocatalysts Prepared by Ultraviolet Irradiation
Fabrication and Properties of Carbon Fibre-Basalt Fibre/Epoxy Resin Composites
G. Dye-Sensitized Solar Cells for the Utilization of Solar Energy
Improved Photoelectrode of Dye-Sensitized Solar Cell Using a ZnO/Zn2TiO4
Effect of Nickel Oxide Thin Films on Photoconversion Efficiency in Zinc Oxide Dye-Sensitized Solar Cells
H. Bio-Inspired Materials for a Better Life and other Novel Materials
Influence of Ring Length on Electric Field Distribution in CdZnTe Frisch-Ring Detector
A Novel Antimicrobial Nano-Composite Porous Material for Bone Repair
Effects of Ca2+ Concentration on Calcium Carbonate Crystallization in Lignin Solution System
Mechanical Properties of Dysprosia (Dy2O3) Added Al2O3 ZrO2 HA Composite
The Influence of Polyethylene Film on the Concentration of CO2 in the Soil
The Synthesis of Magnetic Nano-Sized Iron Oxide from Liquid Solution by Adding Organic Components
I. Porous Materials
Microstructure and Strength Properties of AZ31 Mg Alloy Foams
TEM Analysis on Nanovoid Formation in Annealed Amorphous Oxides
Anisotropic Tensile Deformation of Lotus-Type Porous Copper
Micro-Porous Alumina Membrane Prepared by Dip Coating Using Latex Binder
Preparation of Adsorbent from Blue Coke Powder and its Application in Coking Wastewater
Preparation of the Multi-Layer Copper and Nickel Foam by Electrodeposition
J. Synthesis and Properties of Semiconducting Materials and their Related Areas
Effect of X-Ray Irradiation on the Current of P-N Diode
Enhancement of Sensor Response by Au Nanoparticles Doping on ZnO Tetrapod Sensor
Defects Study by Activation Energy Profile for Lowering Leakage Current in P-N Junction
Geometrical Dependency of Wiggler Characteristics in the Miniaturized Free Electron Laser Module
A Study on Adhesive Properties of a Damascene Electroplated Cu Composite Sheet
Effect of Ball Milling of Composite Additives on the Microstructure and Electrical Properties of ZnO Varistors
Fabrication of LaNiO3 Thin Film on the Si-Substrate by Sol-Gel Process
Fabrication and Precise Alignment of Electron Lenses in the Microcolumn Using the Laser Diffraction Pattern
Preparation of Fluorine Doped Tin Oxide Film by Ultrasonic Spray Pyrolysis
Structural Properties and Microstructures of SrTiO3/SrTi1-xNbxO3 Superlattices Grown by Ion Beam Deposition
Synthesis of Nanosized TiO2-SiO2 Particles in Microemulsions Stabilized by Anionic Surfactants
K. Others
Development of Multiple Water Quality Measurement Devices
Establishment of Waternode Stations for Water Quality Monitoring by IP-USN
Field Application of Particle Filtration with EPP (Expanded Polypropylene) Engineered Media of Road Runoff
Field Application of the Pelletized Fibrous Filter Device
Multistage Soil Filter System for Rainwater Collection and Use
Nutrient Removal Using BauxsolTM for Treated Wastewater Reuse