Eco-Materials Processing and Design XII

<ul><li>Preface, Organizing Committee and Sponsors</li><li>A. Materials for Environment Preservation, Energy Conservation and New Energy</li><li>Barium-Free Glass-Ceramic Sealants from the System CaO-MgO-B₂O₃-Al₂O₃-SiO₂ for Application in the SOFC</li><li>Fuel Gases from Gasification Process of Glass Fiber/Epoxy Composite Waste</li><li>A Study on the Characteristics of the Polycrystalline Silicon Annealed by the SHG Nd:YAG Laser</li><li>Adsorption Mechanism of Copper(II) Ions on Expansion-Treated Rice Husk</li><li>Photoemission and Energy Gap of CdS Synthesized by Solid State Microwave-Plasma</li><li>Cu (II)-Containing Micro-Arc Oxidation Ceramic Layers on Aluminum: Formation, Composition, and Catalytic Properties</li><li>Effects of Annealing Conditions on Morphology and Permeability of Palladium Membrane</li><li>Fixed-Bed Column Study for Zn (II) Removal from Solution Using Expanding Rice Husk</li><li>Graft Copolymerization of Soybean Protein Isolate and Methyl Methacrylate</li><li>Nano Composite Membranes of Sulfonated Poly(ether sulfone) Containing 4,4-Bis(4-hydroxylphenyl)valeric Acid and SiO₂ for PEMFC</li><li>Preliminary Studies on the Preparation of New-Style White Mud / KGM Membrane</li><li>Preparation and Characterization of Sulfonated Imide-Grafted Poly(ethersulfone)s</li><li>Fabrication of Bi_0.5Na_0.5ZrO₃ Powder by Mixed Oxide Method</li><li>Preparation, Electrochemical Properties and Cytotoxicity Assessment of Nanosized CuO/La₂O₃/CeO₂ Composite for the Decomposition of Gaseous Ammonia</li><li>Sol-Gel Derived La_0.56Sr_0.4Co_0.2Fe_0.8O_3-? Cathodes for IT-SOFC Applications</li><li>Study on the Reaction of Acetylated Konjac Glucomannan and EVA during Processing</li><li>Synthesis and Thermoelectric Properties of Co_4-XFe_XSb_12-YSn_Y Skutterudites</li><li>Synthesis and Thermoelectric Properties of Undoped Half-Heusler Zr-Co-Sb Alloy Processed by Mechanically Alloying and Hot Pressing</li><li>The Adsorption of Cd(II) Ions on Sodium Hydroxide-Treated Bamboo Powder</li><li>The Studies of Adsorption of Heavy Metal Ions of Lead andCopper by Distillers' Grains</li><li>The Properties of ZnO Nanorods for Organic-Inorganic Solar Cell Fabricated by Wet Chemical Method</li><li>Effect of Membrane Material Properties on Efficiency of Membrane Distillation</li><li>B. Materials Processing Technologies for Reduction of Environmental Impact</li><li>Influences of Atomizing Pressure on Properties and Microstructure at Brazed Joint of Lead-Free Solder Powder</li><li>Analysis of Fiber Filter Media after 6 Years of Use as a First Flush Filter</li><li>Application of Acid Modified CuO/Al₂O₃ Nanostructured Catalysts and its Cytotoxicity Assessment for Enhanced CH₄-SCR Performance</li><li>Catalytic Oxidation of Toluene over Fe₂O₃/Al₂O₃ Catalyst</li><li>Characterization of CuO/ZnO/Al₂O₃ Catalyst for Methanol Synthesis</li><li>Comparison of Sonochemistry Method and Sol-Gel Method for the Fabrication of TiO₂ Powder</li><li>Environmentally Benign Microwave-Assisted Sonogashira Preparation of Aromatic Compounds</li><li>Adsorption Studies of Nitrobenzene onto Aminated Lignin</li><li>Immobilization of Iron Tetrasulfophthalocyanine on MCF-NH2 and MCM-41 Mesoporous Silicas</li><li>Photocatalytic Activities of Transition Metal-Doped TiO₂ Nano-Powders by Sonochemical Method and their Physicochemical Properties</li><li>Photocatalytic Decolorization of Methylene Blue by Ferric Stearate, Ferrocene and NiDBC under Sunlight Irradiation</li><li>Reaction Synthesis of TiAl/Ti₂AlC <i>In Situ</i> Composites</li><li>Relationship between Chemical Composition and the Amount of Phosphorus Adsorbed</li><li>Separation of Cobalt from Zinc Sulfate Solution by Novel Oxidant</li><li>Study on the Roller-Bending Simulation to Promote Productivity in the HINGE STRAP Forming System</li><li>Texture Development in Cold Rolled and Annealed Ta</li><li>Theoretical Study for the Interaction of Chitosan and Sulfate</li><li>Effect of Annealing on the Properties of Surface Nanocrystallized CP-Ti</li><li>Structure and Dielectric Properties of Bi_0.5K_0.5TiO₃-SrTiO₃ Lead-Free Ceramics</li><li>C. Eco-Materials Processing and Design</li><li>Effect of Microcrystalline Cellulose from Banana Stem Fiber on Mechanical Properties and Crystallinity of PLA Composite Films</li><li>Size Reduction of Gold Nanoparticles by Pulsed Laser Ablation and Re-Irradiation in Water Media</li><li>Reactive Compatibilization of Polylactide, Thermoplastic Starch and Poly(butylene adipate-co-terephthalate) Biodegradable Ternary Blend Films</li><li>Structure and Mechanical Properties of AlCrN Thin Films Deposited by Magnetron Sputtering</li><li>Processing and Properties of Amorphous Magnesium-Based Eco-Materials</li><li>Effect of Artificial Aging on Aluminum Extrusion Alloy for Automobile Bumper</li><li>A Study of Photo and Photocatalytic Degradation of Arylamine with Respect to Design of Organic Light-Emitting Diode</li><li>Effect of Sodium Carbonate Addition on the Property and Formation of Terracotta Panel</li><li>Analysis of Laser and Resistance Spot Weldments on Press-Hardened Steel</li><li>Control of Microstructure and Texture for Mechanical Properties of Mg-Al-Zn Alloys</li><li>Cu Particles Deposition onto MWCNTs by Chemical Reaction</li><li>Debundling of Single Walled Carbon Nanotubes by HPC in 1-Propanol and Water</li><li>Development of Novel Filter Materials for the Treatment of First-Flush Rainwater</li><li>Eco-Glass Based on Thailand Quartz Sands and Bismuth Oxide</li><li>Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al₂O₃/TiAl <i>In-Situ</i> Composites</li><li>Effects of Fabricated Method on the Coefficient of Friction of Al₂O₃-15 wt% ZrO₂-3 wt% Solid Lubricant Composites</li><li>Effect of Particle Size Distribution on the Workability of Alumina-Based Castable Refractories</li><li>Effect of Heat Treatment Temperature and Atmosphere on Micro Structure of Polyphenylcarbosilane</li><li>Effects of Physical Melt Treatments on Microstructural Evolution and Anodizing Characteristics of Al-Si Casting Alloys</li><li>Evaluation of Crack Sensitivity and Gap Bridging Ability during Laser Butt Welding of Aluminum 5J32 and 6K21 Alloys</li><li>Preparation and Hydrogen Permeation on Al₂O₃-CuO-ZnO (ACZ)/Co Membrane by Hot Press Sintering (HPS)</li><li>Fabrications and Evaluations of Hydrogen Permeation on Al₂O₃-CuO-ZnO(ACZ)/Pd Coated Membrane</li><li>Fabrications and Evaluations of Hydrogen Capacities on MgH_X-Transition Metal Oxide(TMO) Composites by Mechanical Alloying</li><li>Improvement of Strength of Lotus-Type Porous Aluminum through ECAE Process</li><li>Influence of Raw Materials on the Preparation of Terracotta Panel</li><li>Influence of Volume Fraction of Bainite on Mechanical Properties of X80 Pipeline Steel with Excellent Deformability</li><li>Mechanical Behaviors and Texture Development of the Extruded Magnesium AZ31 Alloys</li><li>Pigment Printing of Natural Dye from Red Mangrove Bark on Silk Fabrics</li><li>Pollutant Decomposition in Micro Porous Ceramics Made Out of Volcanic Rocks</li><li>Strength Enhancement of Bottom Ash-Based Concretes Using Metakaolin</li><li>Study on the Artificial Lightweight Aggregate by Using Reject Ash, Dredged Soil, and Ferrous Materials</li><li>Synthesis and Formation Mechanism of Mn-Doped Zn₂SiO₄ Brown Pigment</li><li>Synthesis of Co-Doped Tialite Ceramic Pigments and Coloring in Glazes</li><li>Synthesis of Perovskite Brown Pigments</li><li>D. High Performance Materials Including Nano-Materials for the Environment</li><li>Effects of Strain Rate in Cold-Rolled Pure Copper Produced by Different Rolling Processes</li><li>Preparation of SiC Whiskers by Microwave Heating</li><li>Synthesis and Characterization of Block Copolymer from Natural Rubber, Toluene-2,4-Diisocyanate and Poly(?-aprolactone) Diol-Based Polyurethane</li><li>Synthesis and Characterization of Triglyceride-Based Copolymer from Soybean Oil</li><li>Effect of MgO Coating on the Hydration Resistance of MgO-CaO Clinkers</li><li>Preparation of Ca-?-Sialon-SiC Multiphase Ceramics from Gasification Slag</li><li>Rubber Blend of 80/20 NR/SBR Reinforced with Nanosilica and PS-Encapsulated Nanosilica</li><li>Electrochemical Synthesis of Sensitive Layer of Polyaniline/Multi Wall Carbon Nanotube Composite</li><li>A Homogeneous Solidification Criterion for Undercooled Ni-20at%Pb Hypermonotectic Melts</li><li>Research on the Optimization of Ni/Si Atomic Ratio for Cu-Ni-Si Alloys with High Strength and High Electrical Conductivity</li><li>Oxidation Behavior of As-Forged Fe-25wt%Cr Alloys at 1100 degreesC in Air</li><li>Hydrogen Variation in Molten Steel during LF Refining</li><li>Microstructure and Magnetic Properties of Undercooled Fe-50at%Ni Alloys</li><li>Artificial Neural Network to Predict the Hot Deformation Behavior of Super 13Cr Martensitic Stainless Steel</li><li>Oxidation Behaviors of Pure Ti Thermal Plasma Spray Coated Mo-Si-B Alloys</li><li>Esterification of Chemical Functional Single-Wall Carbon Nanotubes</li><li>Development of Carbon Nanotube - Reinforced Silk and Cannabis Fibers by an Electrophoretic Deposition Method</li><li>Constitutive Equation Development for Large Strain Rate Deformation Processing of 2205 Duplex Stainless Steels</li><li>Investigation of Fabrication and Microstructure of the Fe₃Al/Al₂O₃ Composites by Hot-Pressing Process</li><li>Effect of Ag Addition on the Microstructure and Mechanical Properties of High Conductivity Cu-1Cr-Mg-P Alloy</li><li>Fabrication and Cytotoxicity Studies of the TiO₂ Doped with Copper-Based Nanocomposite Particles</li><li>Effect of Alloying Elements on the Corrosion Wear Behaviors of Low Chromium Cast Iron</li><li>Using GA-ANN to Optimize Heat Treatment Technological Parameters of Super-Martensitic Stainless Steel</li><li>Effect of Heat Treatment on the Microstructural Characteristics of IN738 Turbine Blade</li><li>Effect of Oxide Additives on Catalysis and Microstructure of RBSN Using Low-Purity Silicon Powder as Raw Materials</li><li>Growth of Flower-Like AIN by Combustion Synthesis Assisted with Mechanical Activation</li><li>A Study on Mechanical and Tribological Properties of Hot Pressed Al₂O₃/ZrO₂/h-BN/TiO₂ Composites</li><li>Separability of Fe from Cyanide Tailing by Magnetic Roasting</li><li>Studies on Corrosion Behavior of S-165 and HP Supermartensitic Stainless Steels in Cl^- Environment</li><li>Synthesis and Characterization of Flower-Sphere MoS₂</li><li>Synthesis of High-Purity Ti₃SiC₂ by Infiltration-Sintering</li><li>Synthesis of Ti(C_,N)/Al₂O₃ by Mechanically Induced Self-Propagating Reactive Synthesis</li><li>Investigation of Thermal Sprayed Stainless Steel/WC-12wt%Co Nanocomposite Coatings</li><li>Ultrasound-Enhanced Electrochemical Preparation of Atomic Oxidants</li><li>Effect of Annealing on Ag-Doped Submicron Silica Powder Prepared with Modified Stoeber Method</li><li>Influencing of Ca-Based Sorbent on the Sulfur Retention</li><li>E. Hybrid Materials and Composites for ECO Society</li><li>Effect of Melt Treatment on Forming and Brazing Characteristics of 4343/3003/4343 Aluminum Clad Sheet</li><li>Comparative Study on the Effects of Different Molecular Weight Polyethylene Powders in Soil</li><li>Study on Microstructure and Impact Strength of Nano-SiO₂ Toughened Epoxy Resin Composites</li><li>Surface and Mechanical Properties of Cellulose Micro-Fiber Reinforced Recycle Polyethylene Film</li><li>Pulsed Electric Current Sintering of the Al₂O₃ - 15wt% ZrO₂ Nanocomposites with 3wt% of Different Solid Lubricants</li><li>The Effects of Aging Treatment on the Strength and Conductivity of Cu-Ag-Zr-Co Alloy</li><li>Laboratory Evaluation of Ultraviolet Radiation for Asphalt Pavement Performance in Desert Regions</li><li>F. Photocatalysis for a Better Environment and Clean Energy</li><li>Doted Titania(B) Nanobelts with Anatase Nanocrystals for Improved Photocatlytic Activity</li><li>Preparation of Nanocrystalline W-Doped TiO₂ Powders and their Photocatalytic Properties under Visible Light Irradiation</li><li>Pyrolysis Characteristics and Kinetics of Low Rank Coal</li><li>Visible Light Responsive Titanium Dioxide Photocatalysts Prepared by Ultraviolet Irradiation</li><li>Fabrication and Properties of Carbon Fibre-Basalt Fibre/Epoxy Resin Composites</li><li>G. Dye-Sensitized Solar Cells for the Utilization of Solar Energy</li><li>Improved Photoelectrode of Dye-Sensitized Solar Cell Using a ZnO/Zn₂TiO₄</li><li>Effect of Nickel Oxide Thin Films on Photoconversion Efficiency in Zinc Oxide Dye-Sensitized Solar Cells</li><li>H. Bio-Inspired Materials for a Better Life and other Novel Materials</li><li>Influence of Ring Length on Electric Field Distribution in CdZnTe Frisch-Ring Detector</li><li>A Novel Antimicrobial Nano-Composite Porous Material for Bone Repair</li><li>Effects of Ca²⁺ Concentration on Calcium Carbonate Crystallization in Lignin Solution System</li><li>Mechanical Properties of Dysprosia (Dy₂O₃) Added Al₂O₃ ZrO₂HA Composite</li><li>The Influence of Polyethylene Film on the Concentration of CO₂ in the Soil</li><li>The Synthesis of Magnetic Nano-Sized Iron Oxide from Liquid Solution by Adding Organic Components</li><li>I. Porous Materials</li><li>Microstructure and Strength Properties of AZ31 Mg Alloy Foams</li><li>TEM Analysis on Nanovoid Formation in Annealed Amorphous Oxides</li><li>Anisotropic Tensile Deformation of Lotus-Type Porous Copper</li><li>Micro-Porous Alumina Membrane Prepared by Dip Coating Using Latex Binder</li><li>Preparation of Adsorbent from Blue Coke Powder and its Application in Coking Wastewater</li><li>Preparation of the Multi-Layer Copper and Nickel Foam by Electrodeposition</li><li>J. Synthesis and Properties of Semiconducting Materials and their Related Areas</li><li>Effect of X-Ray Irradiation on the Current of P-N Diode</li><li>Enhancement of Sensor Response by Au Nanoparticles Doping on ZnO Tetrapod Sensor</li><li>Defects Study by Activation Energy Profile for Lowering Leakage Current in P-N Junction</li><li>Geometrical Dependency of Wiggler Characteristics in the Miniaturized Free Electron Laser Module</li><li>A Study on Adhesive Properties of a Damascene Electroplated Cu Composite Sheet</li><li>Effect of Ball Milling of Composite Additives on the Microstructure and Electrical Properties of ZnO Varistors</li><li>Fabrication of LaNiO₃ Thin Film on the Si-Substrate by Sol-Gel Process</li><li>Fabrication and Precise Alignment of Electron Lenses in the Microcolumn Using the Laser Diffraction Pattern</li><li>Preparation of Fluorine Doped Tin Oxide Film by Ultrasonic Spray Pyrolysis</li><li>Structural Properties and Microstructures of SrTiO₃/SrTi_1-xNb_xO₃ Superlattices Grown by Ion Beam Deposition</li><li>Synthesis of Nanosized TiO₂-SiO₂ Particles in Microemulsions Stabilized by Anionic Surfactants</li><li>K. Others</li><li>Development of Multiple Water Quality Measurement Devices</li><li>Establishment of Waternode Stations for Water Quality Monitoring by IP-USN</li><li>Field Application of Particle Filtration with EPP (Expanded Polypropylene) Engineered Media of Road Runoff</li><li>Field Application of the Pelletized Fibrous Filter Device</li><li>Multistage Soil Filter System for Rainwater Collection and Use</li><li>Nutrient Removal Using Bauxsol^TM for Treated Wastewater Reuse</li></ul>