Functionally Graded Materials VII

<ul><li>The Activities of FGM on New Application</li><li>New Progress of Metal-Based Functionally Graded Plasma-Facing Materials in China</li><li>Industrial Applications of FGM Solutions</li><li>Design and Fabrication of Symmetric FGM Plates</li><li>Design and Densification of W-Mo Functionally Graded Materials with Smooth Changes of Composition by Co-Sedimentation</li><li>Functionally Graded Hardmetals with a Continuously Graded Symmetrical Profile</li><li>Large-Size-WC/Co Functionally Graded Materials Fabricated by Spark Plasma Sintering (SPS) Method</li><li>Fabrication of WC-Co Cemented Carbides with Gradient Distribution of WC Grain Size and Co Composition by Tape Casting</li><li>Design and Thermal Shock Performance of W/Cu Functionally Graded Material used as Plasma Facing Component</li><li>Fabrication and Properties of Axisymmetric WC/Co Functionally Graded Hard Metal via Microwave Sintering</li><li>The Anisotropy of Nanocomposite Nd₉Fe_84.5Nb_0.5B₆ Melt Spun Ribbons</li><li>Gradient Ni-Cr-Mo-Nb Surface Alloying Layer</li><li>Study on the Arc-Added Glow Discharge Plasma Non-Hydrogen Carburizing on Titanium Alloy Surfaces</li><li>Functionally Graded Boron Carbide-Aluminum Composites</li><li>Preparation of Flier-Plate Materials with Graded Impedance Used for Hypervelocity Launching</li><li>Oxidation Resistance of TiAl-Inconel625 Graded Alloying Layer</li><li>Thermal Shock Resistance and Ablation Behaviour of Titanium Diboride-Copper-Nickle FGM via SHS</li><li>Friction and Wear Properties of Functionally Graded Aluminum Matrix Composites</li><li>Characterization of Interface between Particles in Al Powder Compacts by Pulse Electric Current Sintering</li><li>Formation of Niobium Aluminide Layers on Niobium Plate by Arc Surface Alloying</li><li>Development of Shape Memory Alloy Fiber Reinforced Smart FGMs</li><li>Improvement of Diffusion Bonding Joint by Ar Ion Bombardment</li><li>Graded Machinable Ceramics: Concept and Practice</li><li>Graded Ceramics for Improved Contact-Damage Resistance</li><li>Surface Modification Technique of Structural Ceramics: Ion Implantation-Assisted Multi-Arc Ion Plating</li><li>Hardness and Tribological Properties of Silicon Nitride Ceramics Implanted by Titanium Ions with MEVVA Sources</li><li>Preparation of Core-Shell Type Particles by Injection Method</li><li>Hydrolysis Mechanism and Method to Improve Water Resistance of Long-After-Glow Phosphor</li><li>Mechanism of Forming the Nanocrystalline Mg,Al-Hydrotalcite and its Crystal Processing under Hydrothermal Conditions</li><li>Effect of Si⁴⁺ Doping on the Thermal Property and Thermal Decomposition Mechanism of Nanocrystalline Mg,Al-Hydrotalcite</li><li>Modification of Photophysical Properties of WO₃ by Doping Different Metals</li><li>Characterization of Plasma Facing SiC/C Functionally Graded Material</li><li>Thick Plate-Shaped Al₂O₃/ZrO₂ Composites with Continuous Gradient Processed by Electrophoretic Deposition</li><li>Microstructures and Toughening Behaviors of Lined Al₂O₃-ZrO₂ Multiphase Ceramics in SHS Composite Pipes</li><li>Optimization Sintering of Zirconia/Alumina Functionally Graded Material</li><li>Design and Preparation of Al₂TiO₅/Al₂O₃ FGM</li><li>Farbrication and Properties of Machinable Al₂O₃/LaPO₄ Composites and FGMs</li><li>Fabrication and Microstructure of MoSi₂/Al₂O₃ Functionally Graded Material</li><li>Fabrication and Properties of TiC/Ti₃SiC₂ Composites and FGMs</li><li>Design and Fabrication of Machinable Al₂O₃/h-BN Composites and FGMs</li><li>Effective Thermal Conductivity of MoSi₂/Oxide Composites</li><li>The Fabrication of TiCN-Based Functionally Graded Cermets by Spark Plasma Sintering</li><li>Formation of Graded and Fine-Grained Structures upon Hot Deformation of SHS Products</li><li>Microstructure and Oxidation Resistance of Carbon/Carbon Composites Coated with Si₃N₄-Si/MoSi₂-SiC Multi-Layers by Slurry Coating and Post Heat-Treatment Process</li><li>Study on the Adsorption Properties of Al-Pillared Montmorillonites</li><li>Influence of Processing Condition on the Ceramics-Lined Pipes by Gravitational Thermit SHS Method</li><li>Fabrication of Al₂O₃-PSZ~Fe-Ni Functionally Graded Pipes</li><li>Modeling and Fabrication of Functionally Graded Materials by the Combustion Synthesis Technique</li><li>Thermal Stress Simulation in TiB₂-Cu Functionally Graded Materials</li><li>Preparation of Cu/SiC FGM by Coating Method and SPS Sintering</li><li>Fabrication of Short-C_f/SiC Functionally Graded Materials</li><li>Al/SiCp Functionally Graded Metal-Matrix Composites Produced by Centrifugal Casting: Effect of Particle Grain Size on Reinforcement Distribution</li><li>Evaluation of Al/SiC Wetting Characteristics in Functionally Graded Metal-Matrix Composites by Synchrotron Radiation Microtomography</li><li>Experimental and Theoretical Investigation of R-Curve Behaviour in Al/Al₂O₃ Functionally Graded Materials</li><li>Multi-Billet Extrusion of Multi-Layer Composite Pipes Composed of Stainless Steel and Partially Stabilized Zirconia</li><li>Tensile Properties of Nanostructured FGMs Produced by Spark Plasma Sintering</li><li>Mechanism, Prosperities and Microstructure of Titanium Carbide-Iron Metal-Ceramic from Ilmenite by in Situ Carbothermic Reduction</li><li>Effects of FGM Interlayer on Joining Aluminum Nitride Ceramics to Copper</li><li>Multi-Layer Film Metallization of AlN Ceramic and its Sealing to Metal</li><li>Bonding of Copper to Aluminum Nitride Substrate Using Active Alloy Interlayer</li><li>Study on Mechanisms of SHS Transient Liquid Phase Bonding between Ceramics and Metal in the Composite Pipes</li><li>Thermal Conductivity of LTCC</li><li>Direct Evaluation of Three-Dimensional Platelet Orientation in Functionally Graded Model-Material Fabricated by a Centrifugal Solid-Particle Method</li><li>Development of Functionally Graded Implant and Dental Post for Bio-Medical Application</li><li>Hydroxyapatite Graded Coatings Made through Subsonic Thermal Spraying</li><li>Bioactivity of Plasma Sprayed Wollastonite Coatings in Simulated Body Fluid</li><li>Fabrication of Ti-O Gradient Biomedical Film on Ti6Al4V by DC Glow Plasma Oxidizing</li><li>Surface Modification of Biodegradable PLGA Scaffold with Chitosan for Cell Culture</li><li>A New Method for Protein Immobilization on the Surface of Poly-I-Lactic Acid Film</li><li>Preparation and Biological Evaluations of Heparinized PLLA Films</li><li>Preparation of SiC-Based Thermoelectric Device by Spark Plasma Sintering</li><li>Thermoelectric Properties on n-Type Si_xGe_1-x Graded Materials Containing Fullerite and Nanometer Carbon Tube</li><li>Optimization and Properties of Graded Pseudo-Binary Alloy (PbTe)_1-x-(SnTe)_x Prepared by Spark Plasma Sintering</li><li>Preparation and Interface Analysis of the Segmented CoSb₃/Bi₂Te₃ Thermoelectric Materials</li><li>Effect of FGMs on Thermoelectric Cooling Properties of Bismuth Telluride</li><li>Improvement of Thermoelectric Properties for n-Type PbTe by Adding Ge</li><li>Graded Design of Carrier Concentration in PbTe by Heat-Treatment</li><li>Developing Mechanically and Chemically Stable Contacts between Bi₂Te₃ and FeSi₂</li><li>Piezoelectric Ceramic/Metal Bending Actuators with Functionally Graded Microstructures</li><li>Development of Piezoelectric Ceramic Actuators with Graded Porosity</li><li>Preparation and Dielectric Property of Strontium-Lead Titanate Functionally Graded Ceramics</li><li>Characterization of (Ba,Sr)TiO₃ Functionally Graded Dielectric Ceramics Fabricated from Chemical Coprecipitated Nano-Particles</li><li>Fabrication of Cu/PZT Functionally Graded Actuators by Spark Plasma Sintering</li><li>Design of Functionally Graded Materials towards RAM and their Microwave Reflectivity</li><li>Investigation on Pyroelectric Effect of Multi-Component PMN-PT Ferroelectric Ceramics</li><li>Control of Magnetic Gradient in Magnetically Graded Materials Fabricated by Martensitic Transformation Technique</li><li>Proton Conductivity of Compositionally Graded Proton Conducting Oxides</li><li>Thermal, Mechanical Properties and Ionic Conductivity of (PEO)₁₆LiClO₄ Electrolytes with Different Shape ZnO</li><li>Gradient Ni/SDC Anodes for Solid Oxide Fuel Cells by Tape Casting</li><li>Linearization of the Characteristics of a FGM Thermal Sensor Made from ?-FeSi₂</li><li>Electrothermal Driving Mechanism for SMA Spring Actuators</li><li>Design and Optimization of Flier-Plate Materials with Wave Impedance Gradient</li><li>Effect of Magnetic Field on the Preparation of Silver Halide Emulsion in Gelatin</li><li>Experimental and Theoretical Studies of Photocatalytic Water Splitting on Mixed Oxide Semiconductors</li><li>Photophysical and Photocatalytic Properties of New Photocatalysts CaIn_0.5M_0.5O₃ (M = Nb, Ta)</li><li>Synthesis, Structure and Photocatalytic Property of a New Hydrogen Evolving Photocatalyst Bi₂InTaO₇</li><li>Development of Novel Spinel-Type Photocatalysts for Hydrogen Generation by Solar Energy Conversion</li><li>Research of Alumina and Brazing Filler Metal Interface</li><li>Rheological Properties of Polyacrylate Thickening Agent</li><li>Preparation of Graded-Index Polymer Optical Fiber Preform</li><li>Structure Study of Polymer Gradient Materials</li><li>Rheological Properties of Polyacrylate Thickening Agent by Model Experiments</li><li>Factors of Refractive Index Distribution of GI POF Preform</li><li>The Influence of Bond Coat and Oxide Layer on the Debonding of Graded Coatings</li><li>Formation Kinetics and Properties of CrNx/H13 Functionally Graded Coating Fabricated by PVD</li><li>Preparation of Functionally Graded Coating on AlN Surface by Molten Salt Reaction</li><li>Behavior of Ti Coating in CBN/Ti/Vitrified Bond Gradient Materials</li><li>TiN Coating Deposited by ARC Method</li><li>Al₂O₃-Al₂Cu₃Coating Produced by SHS Reactive Spraying</li><li>Thermal Shock Resistance of Ceramic/Metal Gradient Thermal Barrier Coating</li><li>Analysis and Measurement of Thermal Residual Stresses in Ceramic/Metal Gradient Thermal Barrier Coatings</li><li>Study on Plasma-Carburization Process of Ni-Base Self-Fluxing Alloy Coating</li><li>The Fabrication and Characteristics of Sr_1-xBa_xBi₄Ti₄O₁₅ Functionally Graded Thin Films by Sol-Gel Method</li><li>Synthesis of Nanocrystalline Magnetite (Fe₃O₄) Films by Self-Reduction Sol-Gel Route</li><li>A New Application of Pulsed Laser Deposition to Produce Functional Graded Material Thin Films</li><li>Investigation of Al₂O₃ Coating with FGMs Structure by SHS</li><li>Preparation and Optical Properties of Strontium-Barium-Bismuth Titanate Graded Thin Films</li><li>Tetrahedral Amorphous Carbon Films Prepared by Filtered Catholic Vacuum Arc Deposition</li><li>Fabrication of the Volatile Corrosion Film with FGMs Structure</li><li>The Strength of Functionally Graded Joints: Crack Paths and Residual Stress for Cracks Perpendicular to the Gradient</li><li>Development of Functionally Gradient Materials</li><li>An Interface Crack between a Functionally Graded Coating and a Homogeneous Substrate under Thermo-Mechanical Loading</li><li>Two-Cracks Propagation Problem in a Functionally Graded Material Plate under Thermal Loads</li><li>Energy Release Rate of Functionally Graded Materials with Interface Edge-Cracks under Uniform Temperature Change</li><li>Fractal Discrimination of Toughness/Fragileness on In-Situ FGM of Aluminum Base by Centrifugal Casting</li><li>Analysis of a Mode III Crack in a Functionally Gradient Piezoelectric Material</li><li>Estimate of Crack Speed in Functionally Graded Material Based on T* Crack</li><li>Surface Cracking of Functionally Graded Materials with Arbitrarily Distributed Properties</li><li>Impact Characteristic Analysis of Ceramic/Metal FGM</li><li>Dynamic Fracture of a Functionally Graded Coating</li><li>Cohesive Model for Thin Graded Film/Substrate Interfacial Cleavage Fracture</li><li>FEM Simulations and Optimization about Residual Stresses in Coating Structures with Functionally Graded Materials Layer</li><li>Transient and Residual Stresses in a Hollow Cylinder of Functionally Graded Materials</li><li>Heat Transfer and Thermal Stress Analysis of Ceramic/Metal Gradient Cylinder Model</li><li>Finite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual Reduction</li><li>Thermal Elastic-Plastic Limit Analysis and Optimal Design for Composite Cylinders of Ceramic/Metal Functionally Graded Materials</li><li>Computational Micromechanics Analysis of the Functionally Graded Materials under Thermal Shock Loading</li><li>Stress Analysis in Multilayered FGM Plates under Thermal Shock</li><li>Thermal Stress Research on the Functionally Gradient Material</li><li>Analysis of Gradient Forming Design for FGM of Axisymmetrical Geometries with Thermal Stress Relaxation</li><li>Development and Experimental Validation of a Numerical Thermal Model for the Evaluation of the Depth of Laser Treated Zone in the Laser Transformation Hardening Process</li><li>Optimization of Material Composition of FGM Coating under Thermal Loading by Micro Genetic Algorithms</li><li>Axisymmetric Post-Buckling of a Functionally Graded Circular Plate Subjected to Uniformly Distributed Radial Compression</li><li>Using the Adjoint Equation Method to Optimize FGM Thermoelastic Structures</li><li>Elastic and Plastic Analyses of Functionally Graded Elements</li><li>Assessment on Anisotropic Properties of Particle-Dispersed Composites with Debonded Interface</li><li>On Deformations of a Spherically Isotropic Hollow Sphere of a Functionally Graded Material</li><li>Formation of Graded Mechanical Properties in Turnouts</li><li>Simulation of Particle Trajectories and Statistical Analysis in Twin-Screw Extruders</li><li>Numerical Simulation of Twin-Screw Extrusion with Wall Slip</li><li>Development of Ceramic/Metal Gradient Thermal Barrier Coating Design Software</li><li>Efficient Reformulation of the Higher-Order Theory for FGMs</li><li>The Heterogeneous Constitutive Theory of the Generalized Functionally Graded Materials Structure</li><li>Emission Control of Electromagnetic Wave by Using Diamond Photonic Crystals with Graded Lattice Spacing</li><li>The Optimization Design on Metal/Ceramic FGM Armor with Neural Net and Conjugate Gradient Method</li><li>An Investigation into Application of Ceramic-Metal FGM Plating to Small High Speed Gasoline Engines</li><li>Researches on Hypervelocity Launching by Flier-Plate Materials with Graded Impedance</li><li>Solar Excited Laser Using FGM Concept for Space Energy Network</li><li>An Examination of the Design of a kW-Range 3-Stage Cascade-Type Thermoelectric Power Generation Device Composed of HB-Type Thermoelectric Modules</li><li>Design of Functionally Graded Wood-Based Board for Floor Heating System with Higher Energy Efficiency</li><li>New Visible Light Driven Semiconductor Photocatalysts and their Applications as Functional Eco-Materials</li></ul>