Functionally Graded Materials VII

The Activities of FGM on New ApplicationNew Progress of Metal-Based Functionally Graded Plasma-Facing Materials in ChinaIndustrial Applications of FGM SolutionsDesign and Fabrication of Symmetric FGM PlatesDesign and Densification of W-Mo Functionally Graded Materials with Smooth Changes of Composition by Co-SedimentationFunctionally Graded Hardmetals with a Continuously Graded Symmetrical ProfileLarge-Size-WC/Co Functionally Graded Materials Fabricated by Spark Plasma Sintering (SPS) MethodFabrication of WC-Co Cemented Carbides with Gradient Distribution of WC Grain Size and Co Composition by Tape CastingDesign and Thermal Shock Performance of W/Cu Functionally Graded Material used as Plasma Facing ComponentFabrication and Properties of Axisymmetric WC/Co Functionally Graded Hard Metal via Microwave SinteringThe Anisotropy of Nanocomposite Nd9Fe84.5Nb0.5B6 Melt Spun RibbonsGradient Ni-Cr-Mo-Nb Surface Alloying LayerStudy on the Arc-Added Glow Discharge Plasma Non-Hydrogen Carburizing on Titanium Alloy SurfacesFunctionally Graded Boron Carbide-Aluminum CompositesPreparation of Flier-Plate Materials with Graded Impedance Used for Hypervelocity LaunchingOxidation Resistance of TiAl-Inconel625 Graded Alloying LayerThermal Shock Resistance and Ablation Behaviour of Titanium Diboride-Copper-Nickle FGM via SHSFriction and Wear Properties of Functionally Graded Aluminum Matrix CompositesCharacterization of Interface between Particles in Al Powder Compacts by Pulse Electric Current SinteringFormation of Niobium Aluminide Layers on Niobium Plate by Arc Surface AlloyingDevelopment of Shape Memory Alloy Fiber Reinforced Smart FGMsImprovement of Diffusion Bonding Joint by Ar Ion BombardmentGraded Machinable Ceramics: Concept and PracticeGraded Ceramics for Improved Contact-Damage ResistanceSurface Modification Technique of Structural Ceramics: Ion Implantation-Assisted Multi-Arc Ion PlatingHardness and Tribological Properties of Silicon Nitride Ceramics Implanted by Titanium Ions with MEVVA SourcesPreparation of Core-Shell Type Particles by Injection MethodHydrolysis Mechanism and Method to Improve Water Resistance of Long-After-Glow PhosphorMechanism of Forming the Nanocrystalline Mg,Al-Hydrotalcite and its Crystal Processing under Hydrothermal ConditionsEffect of Si4+ Doping on the Thermal Property and Thermal Decomposition Mechanism of Nanocrystalline Mg,Al-HydrotalciteModification of Photophysical Properties of WO3 by Doping Different MetalsCharacterization of Plasma Facing SiC/C Functionally Graded MaterialThick Plate-Shaped Al2O3/ZrO2 Composites with Continuous Gradient Processed by Electrophoretic DepositionMicrostructures and Toughening Behaviors of Lined Al2O3-ZrO2 Multiphase Ceramics in SHS Composite PipesOptimization Sintering of Zirconia/Alumina Functionally Graded MaterialDesign and Preparation of Al2TiO5/Al2O3 FGMFarbrication and Properties of Machinable Al2O3/LaPO4 Composites and FGMsFabrication and Microstructure of MoSi2/Al2O3 Functionally Graded MaterialFabrication and Properties of TiC/Ti3SiC2 Composites and FGMsDesign and Fabrication of Machinable Al2O3/h-BN Composites and FGMsEffective Thermal Conductivity of MoSi2/Oxide CompositesThe Fabrication of TiCN-Based Functionally Graded Cermets by Spark Plasma SinteringFormation of Graded and Fine-Grained Structures upon Hot Deformation of SHS ProductsMicrostructure and Oxidation Resistance of Carbon/Carbon Composites Coated with Si3N4-Si/MoSi2-SiC Multi-Layers by Slurry Coating and Post Heat-Treatment ProcessStudy on the Adsorption Properties of Al-Pillared MontmorillonitesInfluence of Processing Condition on the Ceramics-Lined Pipes by Gravitational Thermit SHS MethodFabrication of Al2O3-PSZ~Fe-Ni Functionally Graded PipesModeling and Fabrication of Functionally Graded Materials by the Combustion Synthesis TechniqueThermal Stress Simulation in TiB2-Cu Functionally Graded MaterialsPreparation of Cu/SiC FGM by Coating Method and SPS SinteringFabrication of Short-Cf/SiC Functionally Graded MaterialsAl/SiCp Functionally Graded Metal-Matrix Composites Produced by Centrifugal Casting: Effect of Particle Grain Size on Reinforcement DistributionEvaluation of Al/SiC Wetting Characteristics in Functionally Graded Metal-Matrix Composites by Synchrotron Radiation MicrotomographyExperimental and Theoretical Investigation of R-Curve Behaviour in Al/Al2O3 Functionally Graded MaterialsMulti-Billet Extrusion of Multi-Layer Composite Pipes Composed of Stainless Steel and Partially Stabilized ZirconiaTensile Properties of Nanostructured FGMs Produced by Spark Plasma SinteringMechanism, Prosperities and Microstructure of Titanium Carbide-Iron Metal-Ceramic from Ilmenite by in Situ Carbothermic ReductionEffects of FGM Interlayer on Joining Aluminum Nitride Ceramics to CopperMulti-Layer Film Metallization of AlN Ceramic and its Sealing to MetalBonding of Copper to Aluminum Nitride Substrate Using Active Alloy InterlayerStudy on Mechanisms of SHS Transient Liquid Phase Bonding between Ceramics and Metal in the Composite PipesThermal Conductivity of LTCCDirect Evaluation of Three-Dimensional Platelet Orientation in Functionally Graded Model-Material Fabricated by a Centrifugal Solid-Particle MethodDevelopment of Functionally Graded Implant and Dental Post for Bio-Medical ApplicationHydroxyapatite Graded Coatings Made through Subsonic Thermal SprayingBioactivity of Plasma Sprayed Wollastonite Coatings in Simulated Body FluidFabrication of Ti-O Gradient Biomedical Film on Ti6Al4V by DC Glow Plasma OxidizingSurface Modification of Biodegradable PLGA Scaffold with Chitosan for Cell CultureA New Method for Protein Immobilization on the Surface of Poly-I-Lactic Acid FilmPreparation and Biological Evaluations of Heparinized PLLA FilmsPreparation of SiC-Based Thermoelectric Device by Spark Plasma SinteringThermoelectric Properties on n-Type SixGe1-x Graded Materials Containing Fullerite and Nanometer Carbon TubeOptimization and Properties of Graded Pseudo-Binary Alloy (PbTe)1-x-(SnTe)x Prepared by Spark Plasma SinteringPreparation and Interface Analysis of the Segmented CoSb3/Bi2Te3 Thermoelectric MaterialsEffect of FGMs on Thermoelectric Cooling Properties of Bismuth TellurideImprovement of Thermoelectric Properties for n-Type PbTe by Adding GeGraded Design of Carrier Concentration in PbTe by Heat-TreatmentDeveloping Mechanically and Chemically Stable Contacts between Bi2Te3 and FeSi2Piezoelectric Ceramic/Metal Bending Actuators with Functionally Graded MicrostructuresDevelopment of Piezoelectric Ceramic Actuators with Graded PorosityPreparation and Dielectric Property of Strontium-Lead Titanate Functionally Graded CeramicsCharacterization of (Ba,Sr)TiO3 Functionally Graded Dielectric Ceramics Fabricated from Chemical Coprecipitated Nano-ParticlesFabrication of Cu/PZT Functionally Graded Actuators by Spark Plasma SinteringDesign of Functionally Graded Materials towards RAM and their Microwave ReflectivityInvestigation on Pyroelectric Effect of Multi-Component PMN-PT Ferroelectric CeramicsControl of Magnetic Gradient in Magnetically Graded Materials Fabricated by Martensitic Transformation TechniqueProton Conductivity of Compositionally Graded Proton Conducting OxidesThermal, Mechanical Properties and Ionic Conductivity of (PEO)16LiClO4 Electrolytes with Different Shape ZnOGradient Ni/SDC Anodes for Solid Oxide Fuel Cells by Tape CastingLinearization of the Characteristics of a FGM Thermal Sensor Made from ?-FeSi2Electrothermal Driving Mechanism for SMA Spring ActuatorsDesign and Optimization of Flier-Plate Materials with Wave Impedance GradientEffect of Magnetic Field on the Preparation of Silver Halide Emulsion in GelatinExperimental and Theoretical Studies of Photocatalytic Water Splitting on Mixed Oxide SemiconductorsPhotophysical and Photocatalytic Properties of New Photocatalysts CaIn0.5M0.5O3 (M = Nb, Ta)Synthesis, Structure and Photocatalytic Property of a New Hydrogen Evolving Photocatalyst Bi2InTaO7Development of Novel Spinel-Type Photocatalysts for Hydrogen Generation by Solar Energy ConversionResearch of Alumina and Brazing Filler Metal InterfaceRheological Properties of Polyacrylate Thickening AgentPreparation of Graded-Index Polymer Optical Fiber PreformStructure Study of Polymer Gradient MaterialsRheological Properties of Polyacrylate Thickening Agent by Model ExperimentsFactors of Refractive Index Distribution of GI POF PreformThe Influence of Bond Coat and Oxide Layer on the Debonding of Graded CoatingsFormation Kinetics and Properties of CrNx/H13 Functionally Graded Coating Fabricated by PVDPreparation of Functionally Graded Coating on AlN Surface by Molten Salt ReactionBehavior of Ti Coating in CBN/Ti/Vitrified Bond Gradient MaterialsTiN Coating Deposited by ARC MethodAl2O3-Al2Cu3 Coating Produced by SHS Reactive SprayingThermal Shock Resistance of Ceramic/Metal Gradient Thermal Barrier CoatingAnalysis and Measurement of Thermal Residual Stresses in Ceramic/Metal Gradient Thermal Barrier CoatingsStudy on Plasma-Carburization Process of Ni-Base Self-Fluxing Alloy CoatingThe Fabrication and Characteristics of Sr1-xBaxBi4Ti4O15 Functionally Graded Thin Films by Sol-Gel MethodSynthesis of Nanocrystalline Magnetite (Fe3O4) Films by Self-Reduction Sol-Gel RouteA New Application of Pulsed Laser Deposition to Produce Functional Graded Material Thin FilmsInvestigation of Al2O3 Coating with FGMs Structure by SHSPreparation and Optical Properties of Strontium-Barium-Bismuth Titanate Graded Thin FilmsTetrahedral Amorphous Carbon Films Prepared by Filtered Catholic Vacuum Arc DepositionFabrication of the Volatile Corrosion Film with FGMs StructureThe Strength of Functionally Graded Joints: Crack Paths and Residual Stress for Cracks Perpendicular to the GradientDevelopment of Functionally Gradient MaterialsAn Interface Crack between a Functionally Graded Coating and a Homogeneous Substrate under Thermo-Mechanical LoadingTwo-Cracks Propagation Problem in a Functionally Graded Material Plate under Thermal LoadsEnergy Release Rate of Functionally Graded Materials with Interface Edge-Cracks under Uniform Temperature ChangeFractal Discrimination of Toughness/Fragileness on In-Situ FGM of Aluminum Base by Centrifugal CastingAnalysis of a Mode III Crack in a Functionally Gradient Piezoelectric MaterialEstimate of Crack Speed in Functionally Graded Material Based on T* CrackSurface Cracking of Functionally Graded Materials with Arbitrarily Distributed PropertiesImpact Characteristic Analysis of Ceramic/Metal FGMDynamic Fracture of a Functionally Graded CoatingCohesive Model for Thin Graded Film/Substrate Interfacial Cleavage FractureFEM Simulations and Optimization about Residual Stresses in Coating Structures with Functionally Graded Materials LayerTransient and Residual Stresses in a Hollow Cylinder of Functionally Graded MaterialsHeat Transfer and Thermal Stress Analysis of Ceramic/Metal Gradient Cylinder ModelFinite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual ReductionThermal Elastic-Plastic Limit Analysis and Optimal Design for Composite Cylinders of Ceramic/Metal Functionally Graded MaterialsComputational Micromechanics Analysis of the Functionally Graded Materials under Thermal Shock LoadingStress Analysis in Multilayered FGM Plates under Thermal ShockThermal Stress Research on the Functionally Gradient MaterialAnalysis of Gradient Forming Design for FGM of Axisymmetrical Geometries with Thermal Stress RelaxationDevelopment and Experimental Validation of a Numerical Thermal Model for the Evaluation of the Depth of Laser Treated Zone in the Laser Transformation Hardening ProcessOptimization of Material Composition of FGM Coating under Thermal Loading by Micro Genetic AlgorithmsAxisymmetric Post-Buckling of a Functionally Graded Circular Plate Subjected to Uniformly Distributed Radial CompressionUsing the Adjoint Equation Method to Optimize FGM Thermoelastic StructuresElastic and Plastic Analyses of Functionally Graded ElementsAssessment on Anisotropic Properties of Particle-Dispersed Composites with Debonded InterfaceOn Deformations of a Spherically Isotropic Hollow Sphere of a Functionally Graded MaterialFormation of Graded Mechanical Properties in TurnoutsSimulation of Particle Trajectories and Statistical Analysis in Twin-Screw ExtrudersNumerical Simulation of Twin-Screw Extrusion with Wall SlipDevelopment of Ceramic/Metal Gradient Thermal Barrier Coating Design SoftwareEfficient Reformulation of the Higher-Order Theory for FGMsThe Heterogeneous Constitutive Theory of the Generalized Functionally Graded Materials StructureEmission Control of Electromagnetic Wave by Using Diamond Photonic Crystals with Graded Lattice SpacingThe Optimization Design on Metal/Ceramic FGM Armor with Neural Net and Conjugate Gradient MethodAn Investigation into Application of Ceramic-Metal FGM Plating to Small High Speed Gasoline EnginesResearches on Hypervelocity Launching by Flier-Plate Materials with Graded ImpedanceSolar Excited Laser Using FGM Concept for Space Energy NetworkAn Examination of the Design of a kW-Range 3-Stage Cascade-Type Thermoelectric Power Generation Device Composed of HB-Type Thermoelectric ModulesDesign of Functionally Graded Wood-Based Board for Floor Heating System with Higher Energy EfficiencyNew Visible Light Driven Semiconductor Photocatalysts and their Applications as Functional Eco-Materials