Advances in Abrasive Technology XIX

<ul><li>Preface, Committees, Sponsors</li><li>Chapter 1: Abrasive Machining</li><li>Fabrication of Nanotwinned Surface on a Nickel Alloy Using a Developed Diamond Panel with Tips Array</li><li>Simulation Research for the Effect of KDP Crystal Defect and Initial Internal Stress on Sawing Stress</li><li>Effects of Electricity Parameters on Surface Quality of Reaction Bonded Silicon Carbide Ceramic with Electrical Discharge Diamond Grinding</li><li>A Mechanical Model of Diamond Wire Sawing of Steel Structures</li><li>Grinding of Riblets on Curved Paths</li><li>New Evaluation Method of Polishing Pad Property for Estimating Edge Roll-Off of Silicon Wafer</li><li>Development of a Novel Shell Shaping Method with CFRTP: Forming Experiment Using Localized Heating in Processing Point</li><li>Effects of Cutting Atmosphere on High-Speed End Milling Process for Titanium Alloy Ti6Al4V</li><li>Influence of Wheel Position Parameters on Flute Profile of Micro-Drill</li><li>Development of a PCD Burnishing Tool and its Burnishing Performance</li><li>Adaptive Grinding Strategy Development</li><li>Optimization of the Removal Function of Dual-Rotation Magnetorheological Finishing</li><li>A Novel Method for Grinding Wheel Setting Based on Acoustic Emissions</li><li>Centrifugal Internal Grinding by Assembled Wheel with Radially Mobile Segments</li><li>Stochastic Simulation of Tape Grinding for Wafer-Like Workpiece</li><li>Grinding Characteristics of Waspaloy with High-Speed Reciprocation Grinding</li><li>Cylindrical Grinding by Structured Wheels</li><li>Cutting Performance of PCD Tools Improved by Ultraviolet-Ray Irradiation Polishing</li><li>Grinding of Cermets with Cup-Wheels</li><li>Chapter 2: Finishing, Lapping and Polishing</li><li>Effect of Media Degradation on Finishing Characteristics in Abrasive Flow Machining</li><li>Surface Finishing on Arc-Shaped Inner Surface by Ultraviolet Assisted Polishing</li><li>Mirror-Like Surface Finishing of PCD by Fixed Abrasive Polishing</li><li>Feasibility of Magnetocaloric Application in the Machining Processes</li><li>Study on Ultraprecision Polishing of Sapphire - Effects of Crystal Orientation on Polishing Characteristics</li><li>Experimental Research of Cluster Magnetorheological Finishing on Anodic Oxide Film of Aluminum</li><li>A Novel TEM Sample Preparation by Using Micro Magnetorheological Finishing</li><li>Experimental Research on Dressing Parameters of the Plate in Planetary Double-Sided Grinding Process</li><li>Estimation of Unsteady and Steady Polishing Force in Magnetic Abrasive Finishing Using a Permanent Magnet End-Mill Tool</li><li>Chapter 3: Grinding Wheel and Abrasive Grain Technologies</li><li>Research Status of the Pendulum High-Speed Single Grain Test</li><li>Effect of Li₂O, K₂O and ZnO on Vitrified Bond Composites for CBN Grinding Wheels</li><li>Preparation and Test of Conventional Composite Abrasives Using Recycled Alumina Grains</li><li>Wear of Monolayer Brazed Diamond Beads in Wire Sawing of Granite</li><li>Chapter 4: Abrasive Jet Machining</li><li>A New Look into the Loose Particle Impact Process for Ductile Materials</li><li>Modeling of Kerf Profile Generated in Multi-Layered Laminate Composites with Abrasive Waterjet</li><li>Chapter 5: Micro/Nano-Machining</li><li>Drilling of Rod End Faces Using Micro-Cutting Tools</li><li>Critical Feed/Tooth Value Providing Finest Machined Roughness by Peripheral Cutting with Micro Endmills</li><li>Chapter 6: Brittle Material Machining</li><li>Basic Study on Ductile-Mode Grinding of Optical Glass Lenses with Rubber Bonded Diamond Wheels</li><li>Ultrasonic-Vibration-Assisted Micromachining of Sapphire</li><li>Experimental Research on High Speed Grinding of Silicon Nitride Ceramic Spindle</li><li>Chapter 7: Truing, Dressing and ELID</li><li>Analysis of the Temperature Field of the Diamond Wheel Dressed Using Laser Assisted Ultrasonic-Vibration Combined Dressing Method</li><li>Development of a New Truing Device Based on Electro-Contact Discharge Machining for Metal Bond Grinding Wheels</li><li>Laser-Profiling of Metal-Bonded Diamond Grinding Wheels</li><li>Chapter 8: EDM, Ultrasonic Machining and Laser Machining</li><li>Fundamental Investigation of Ultrasonic Assisted Pulsed Electrochemical Grinding of Ti-6Al-4V</li><li>Pulse Laser Irradiation Control Method for Blind Via-Hole Drilling of Printed Wiring Boards Based on High-Speed Camera Monitoring</li><li>Characterisation of the Femtosecond Laser Micro-Grooving Process for Germanium Substrates</li><li>Ultrasonic 3D Shape Milling for Acrylic Resin Optical Products</li><li>Machinability Improvement on High Speed Ultrasonic Turning - The Effect of Tool Oscillating Direction and Tool Chip Shape</li><li>Effects of Grinding Fluid Excited by Ultrasonic Vibration</li><li>Experimental Investigation and Optimization in Rotary Ultrasonic Drilling of C/C Composites</li><li>Chapter 9: Surface Integrity and Materials Characterization</li><li>Nanotwinned Surface on a Ternary Titanium Alloy with Increased Hardness Induced under Nanoindentations</li><li>Deformation Twinning of Molecular Dynamics Simulation in a Ternary Titanium Alloy under Nanoindentation</li><li>Mechanical Property and Characterization on Diamond Films Deposited on WC-Co Substrates</li><li>Analysis of Element Diffusion between Alloy Cast Iron and WC/Co Cemented Carbides</li><li>Relaxation of Thermal Residual Stress in Laser Irradiated Fused Silica by Annealing Process</li><li>Multi-Scale Topography Analysis of Multi-Axis Machined Surfaces Based on Dual-Tree Complex Wavelet Transform</li><li>Oxide Film Generation during Titanium Alloy Turning in Oxygen-Enriched Atmosphere</li><li>Study on Influential Factors of Grinding Surface Residual Stress in Dry for Controlling Workpiece Surface Integrity</li><li>Preparation and Research on Microwave Plasma Chemical Vapor Deposition Diamond Films on SiC Substrate</li><li>Chapter 10: Tribology in Machining</li><li>Quantitative Analysis of the Micro Friction of Single Crystal Silicon</li><li>Study on Tribological Property of Nano-TiO₂ Additive Oil-in-Water Lubricant during Hot Rolling</li><li>Chapter 11: CMP and Semiconductor Wafer Processing</li><li>Chemical Mechanical Polishing on Extremely Low Expansion Glass Ceramic Wafers</li><li>Effects of Relative Velocity on Grinding Performances under Si Wafer Rotary Grinding</li><li>Processing Single Crystal SiC with Semi-Consolidated Polishing Film</li><li>Experiment on Chemical Magnetorheological Finishing of SiC Single Crystal Wafer</li><li>Environment-Friendly Chemical Mechanical Polishing Slurry for SiC Wafer</li><li>Chapter 12: Advanced Cutting Technology</li><li>Proposed Stable Machining Condition Search Method Based on Machined Surface Information after End Milling</li><li>Characteristic of Tool Wear in Small End Milling of Nickel-Titanium Alloy</li><li>Study on the Difference of Machinability between Iron-Based Sintered Materials and Steel Materials</li><li>Study on High Speed Milling of Steam Turbine Blade Materials - Difference in Cutting Characteristics by Alloying Elements of Stainless Steel</li><li>Study on High Speed Milling of Steam Turbine Blade Materials - Differences in Cutting Characteristics of Titanium Alloy and Stainless Steel</li><li>Experimental Investigation of Heat Partition Ratio for the Cutting Tool at a Cutting Speed Ranging from 38 to 6500 m/min</li><li>Identification of Aluminum Alloy Flow Stress to Determine FEM Analysis Constitutive Equation for Machining Material</li><li>Investigation of cBN Electroplated End-Mill Shape for CFRP Machining</li><li>An Advanced Support Method of Aircraft Skin Mirror Milling - Fluid Lubricating Support</li><li>Development of the Axial Splitting Process for Small Diameter Brass Tubes</li><li>Experimental Research on Small-Diameter Deep-Hole Drilling of Austenite Stainless Steel</li><li>Effect of Cutting Speed on the Face Milling of CFRP Using a PCD Tool</li><li>Tapping Performance by Use of Strong Alkali Ion Water</li><li>Surface Roughness and Topography Analysis in Precision Milling of 3J33 Maraging Steel</li><li>Chapter 13: Machine Tools and Systems, Tooling Processing</li><li>Spin Turning of Hardened Steel Using a Rod Tool Made of Cemented Carbide and On-Machine Forming of Rod Tool</li><li>Development of Automatic Servo Tuning Function in Rotary Axis with DDM for Machine Tools and its Performance for Stable Machining</li><li>Chapter 14: In-Process Measurement and Monitoring, Metrology</li><li>Monitoring Method of Process Temperature and Vibration of Rotating Machining Tool with a Wireless Communication Holder System</li><li>Estimation of Machining Error Caused by Deflection of Tool Using Cutting Force in Ball End Milling of Inclined Surface</li><li>Quadrant Protrusion Measurement of Ultra-Precision Machine Tool by Real-Time Position Capturing Method</li><li>High Speed Measuring of a Grinding Tool Surface Topography by a Voronoi Diagram</li><li>Nanopatterning on Nano-Polycrystalline Diamond and Cubic Boron Nitride Using Focused Ion Beam and Heat Treatment to Fabricate Textured Cutting Tools</li></ul>