Eco-Materials Processing and Design VIII

<ul><li>A Study Regarding the Diminutive Effect of Emission of Indoor Air Pollutant (HCHO, TVOC) from After-Treatment Materials such as Ceramic and Catalyst</li><li>A Textile Waste Water Treatment System Using Photocatalytic Reactor and Catalyst Recycle Unit</li><li>Adhesion Improving of TiO₂-Coated Fabrics</li><li>Ag-Doped TiO₂ Immobilized on Al₂O₃ Bead as Oxidation Catalyst</li><li>Antenna Mechanism and De-Aggregation Concept: Novel Mechanistic Principles for Photocatalysis</li><li>Catalytic Decomposition of Methane: Effect of Various Factors on Catalytic Properties</li><li>Characterization and Wettability of TiO₂ Films Deposited by Mid-Frequency Magnetron Reactive Sputtering</li><li>Characterization of Flame-Generated TiO₂ Deposited Activated Carbon Fibers (ACF)</li><li>Control of Organic Micropollutants Using Dual Functional Adsorbent/Catalyst System</li><li>Crystalline Phases and Particle Characteristics of the Combustion-Synthesized TiO₂ Nanoparticles </li><li>Design of Rotational Particle Structure with Negative Poisson's Ratio Using Numerical Method</li><li>Effect of Deformation Temperature and Strain on Recrystallization Behavior of a Nb Micro-Alloyed Steel</li><li>Effects of Dye Mixing on Photocatalytic Splitting of H₂O into H₂ and O₂ on KTaO₃</li><li>Emergence Change of Carbon Dioxide from Artificial Skin by Titania Photocatalyst</li><li>Enhanced Photocatalytic Activities of Ta₂O₅ and Nitrogen Co-Doped TiO₂ under Visible Light Irradiation</li><li>Growth and Microstructure of Gallium Phosphide Nanowires Synthesized by the CVD Method Using Copper Oxide as a Catalyst</li><li>High-Aspect-Ratio Titanium Oxide Nanotubes Anodized in KH₂PO₄/NH₄F/Citric Acid Electrolytes</li><li>Hydrothermal Synthesis of Nanosized TiO₂ Using Basic Peptizing Agents and their Photocatalytic Activity on the Decomposition of Orange II</li><li>Improved Adhesion to ABS Plastics by a Photocatalytic Reaction</li><li>Inhibition Effects of Inorganic and Polymer Coagulants on Acidogenic Fermentation </li><li>A Study for Synthesis of Nanobelt and Nanowire Nickel Powders by Wet Chemical Method</li><li>Nano-Al₂O₃ Reinforced Fe-Cr-Ni Composites Fabricated by Reactive Hot Pressing </li><li>NO_x and SO_x Removal by Low Temperature Plasma-Photocatalysts Hybrid System</li><li>Performance of Photocatalytic Microfiltration with Hollow Fiber Membrane</li><li>Phase Transformation of TiO₂ in the Preparation of Pearlescent Pigment</li><li>Photocatalytic Activity of Doped NaTaO₃ and NaNbO₃ : (Y, La, Nd, Sm) Sol Gel on Degradation of Rhodamine B by UV Irradiation</li><li>Photocatalytic and Photoelectrochemical Properties of Nitrogen-Substituted TiO₂ Thin Films Prepared by an RF Magnetron Sputtering Deposition Method</li><li>Photocatalytic Degradation of NO₂^- by Fe³⁺-Doped TiO₂ Nano Particles Prepared by Sol-Gel Method</li><li>Photocatalytic Degradation of Organics Diluted in Water Using TiO₂ Loaded on Fluoride-Modified Mesoporous Silica</li><li>Preparation of CeO₂ Nanophotocatalyst Using Precipitation Method</li><li>Preparation of Mesostructured Carbon (MSC) for Removal of Natural Organic Matter (NOM) in Aqueous Solution</li><li>Preparation of TiO₂/SiO₂ Hybrid Hardcoatings on Stainless Steel and its Photocatalytic Effect </li><li>Removal of Heavy Metal Ions from Aqueous Solution by Manganese Dioxide-Coated Polypropylene Granules: An Implication of Rainwater Runoff Treatment</li><li>Removing Algae with Pt-Doped TiO₂ Coatings on Foamed Glass</li><li>Suspension Stability of BaTiO₃ Nanoparticles under Electrical Applied Field</li><li>Synthesis of Titania Nanoparticles via Spark Discharge Method Using Air as a Carrier</li><li>Synthesis, Preparation and Catalytic Activities of V-Doped TiO₂ Gel Coating on Porous ?-Al₂O₃ Beads </li><li>The Effect of Isothermal Heat Treatment on the Rolling Contact Fatigue of Carburized Low Carbon Microalloyed Steel</li><li>Mechanism of PVC's Solid-Phase Photocatalytic Degradation Enhanced by Plasma</li><li>Titania Coating of Wasted Silica Particles and their Photocatalytic Property</li><li>Visible Light Response of ZrO₂ by Nitriding and its Photocatalytic Activity</li><li>Visible-Light Activity of N-Doped TiO₂ Powders and their Applications</li><li>XPS Investigation of Passive Layer on Copper-Bearing Antibacterial Ferrite Stainless Steel</li><li>Effect of Sn-Addition on the Bonding Strength between Casting Au-Pt-Cu Alloy and SiO₂-Based Porcelain</li><li>A Study on Boiling Heat Transfer Augmentation of Heating Process Using Ultrasonic Vibrations</li><li>A Study on High Temperature Oxidation of Titanium Alloys in Solid State Bonding Process</li><li>Affinity of Cd and Ni on IDA Immobilized Magnetic Beads with Different Lengths of Spacer Arms </li><li>Antimicrobial Characteristics of Metal Deposited ACF Filters</li><li>Application of Inclined Cooling Plate to Fabrication of Semi-Solid Cast Iron </li><li>Application of Platinum and Titanium Materials as an Electrode for Hygiene Purpose </li><li>Axial Compression and Bending Characteristics of CFRP Hat Shaped Member According to Orientation Angle</li><li>Comparison of Intensity Method and Counting Method in Measurement of Fiber Orientation Angle Distribution Using Image Processing</li><li>Deformation Behavior of Functionally Graded Ti-Ni Shape Memory Alloys</li><li>Deposition and Characterization of D-Gun Sprayed WC-Co Coating with Self-Lubricating Property</li><li>Development of Eco-Flux Laminated Strip for Air Atmosphere Brazing</li><li>Development of Miniaturized Micro Metal Forming Manufacturing System</li><li>Distribution and Shape of the Pores in Water Permeable Concrete</li><li>Dome-Shaped High Power Transformer for Driving A 61 W T5 Lamp</li><li>Effect of Aging on Damping Capacity of AZ91 Alloy</li><li>Effect of Annealing on the Mechanical Property and Machinability of Free-Cutting Phosphor Bronze Alloy</li><li>Effect of Annealing Treatment on Solid State Recycled Magnesium Alloy AZ91D</li><li>Effect of Cr on the High Temperature Corrosion of Al₃Ti-Cr Alloys in SO₂ Atmosphere</li><li>Effect of Dam Design on the Fluid Flow in T-Shaped Continuous Casting Tundish</li><li>Effect of Load on the Abrasive Wear of Silica-Filled Epoxy Resin Composites</li><li>Effect of Product Quality on Life Cycle Assessment in Aluminum Die Casting Process</li><li>Effect of Rare Earth on the Microstructure and Performance of SnAgCuRE Solder</li><li>Effect of the Size of the Reinforcement Phased on the Properties of Silica-Filled Composites </li><li>Effect of Thermo-Mechanical Processing on Microstructure and Elastic Modulus of Metastable Ti-Nb-Si Alloys for Biomedical Application</li><li>Effects of Homogenization Treatment on Thermoelectric Properties of Ba₈Al₁₆Si₃₀</li><li>Effects of Isothermal Heating Process and Rare Earth Elements Addition on the Mechanical Properties of Semi-Solid Formed Mg-5%Zn Alloys</li><li>Effects of Manganese on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Processed by Differential Speed Rolling</li><li>Effects of Processing Factors on the Mechanical Properties of PBO Filament/ Epoxy Composite Materials</li><li>Effects of RPM, Bath Temperature and Anodizing Time in Anodizing for Mg-Al Alloy under Constant Current </li><li>Effects of Samarium on Microstructure and Mechanical Properties of Mg-Al-Ca Alloys </li><li>Electromagnetic Absorption Behaviors of Ferromagnetic Fe-Cr Alloy Powder and Polymer Composites in the Radio Frequency Range</li><li>Electromagnetic Properties of Bi System Superconductor</li><li>Evaluation of Indentation Test for Measuring Young's Modulus of Cancellous Bone </li><li>Evaluations of Microstructure and Hydrogenation Properties on Mg₂NiHx Hydrogen Absorbing Alloys by Hydrogen Induced Mechanical Alloying </li><li>Evolution of Al Alloy Melt Foam Pore Structure in Foaming Process</li><li>Extrudability Improvement of 7000 Series Al Wrought Alloys by Thixoextrusion</li><li>Fabrication of Lotus-Type Porous Ni-(15, 28 and 31) at.% Al Alloys by Unidirectional Solidification in Hydrogen Atmosphere </li><li>Finite Element Analysis for Precision Forging Process of United Transfer Driven Parking Gear</li><li>Formation of Boride Eutectic with Addition of Boron in Mod. 12Cr-1Mo Steels</li><li>Glass-Polydimethysiloxane Hybrid Microthermostat for Restriction Enzyme Digestion </li><li>Hertzian Indentation Damage Behavior of Highly Porous Silicon Nitrides</li><li>High Temperature Corrosion of Ti₃AlC₂ in Ar-1%SO₂ Atmosphere</li><li>Hollow Amorphous Formation via Oxidation of Al Nanoparticles at Low Temperatures</li><li>Hybrid Tooling Using High Speed Cutting and Ceramic Filled SLA (StereoLithography Apparatuses) Technologies</li><li>Identification of Phases in the Wide-Gap Region Brazed with BNi-3 Filler Metal Powder Using Electron Backscatter Diffraction</li><li>Influence of Interlayer on the Corrosion Behavior of Multilayered WC-Ti_1-xAl_xN Coatings in Deaerated 3.5% Sodium Chloride Solution</li><li>Influence of Particles on Cell Structure of Al-Mg Alloys Foamed by Melt Foaming Method</li><li>Influence of Process Parameters on the Adhesive Strength of CrN Coatings </li><li>Influence of Reheating Profile on Microstructural Evolution of 2024 Al Wrought Alloy for Thixoextrusion</li><li>Influence of the Ball Diameter, Material and Taper Design on Transferred Stresses of Ceramic THR</li><li>Influence of Zircon Addition on Thermal Shock Resistance of ZTA for Plasma Reactors</li><li>In-Situ Joining of Combustion Synthesized Ni3Al Intermetallic Compounds with AZ91D Mg Alloy</li><li>In-Situ Synthesis of Co_p/Cu Coating by Laser Cladding </li><li>Investigation of Thermal Shock Behaviors for Machinable SiC/h-BN Ceramic Composites</li><li>Mechanical Properties and Formability of AZ31 Magnesium Alloy Processed by Differential Speed Rolling</li><li>Microstructural Evolution and Crystal Orientation of Electromagnetically Stirred Al Alloy in the Semi-Solid State</li><li>Microstructure Analysis and Characterization of Li(Ni_1-xCo_x)O₂ Thin Film Prepared by Li Diffusion on Ni-Co Alloy Substrates for Cathode Application</li><li>Microstructure and Formability of Different-Speeds Rolled AZ31 Mg Sheet</li><li>Microstructure and High Temperature Mechanical Properties of Inconel 617</li><li>Microstructure and Mechanical Properties of Si₃N₄/hBN Composites Prepared by Hot-Pressing Using Nitrided Si₃N₄ Powders</li><li>Noncombustible Magnesium Alloy Processed by Rotary-Die Equal Channel Angular Pressing Method</li><li>Passive-Active Transition Behavior of 304 Stainless Steel</li><li>Prediction of Temperature Distribution during Curing Thick Thermoset Composite Laminates</li><li>Processing and Properties of Al Based Amorphous/Crystalline Alloy Composites</li><li>Processing, Microstructure and Mechanical Properties of Hybrid Materials with Al-Mg Alloy and its Composites</li><li>Product Geometry for Process Parameter during Rotary Swaging Process as Chipless Forming Process</li><li>Recycling of 6061 Aluminum Alloy Cutting Chips Using Hot Extrusion and Hot Rolling</li><li>Research on High-Purified Lignin Thermoplastics</li><li>Residual Stress Measurement of Plasma Sprayed Coating Layers in ZrO₂</li><li>Strength of AZ31 Alloys Subject to Severe Deformation by ECAP and DSR</li><li>Structure-Mechanical Properties Correlation in a Hydrogenated Ti-Based In-Situ Amorphous Matrix Composite</li><li>Studies on Rheological Property and Miscibility of Lignosulfonate/Polystyrene Blends</li><li>Study on the Application of Infrared Thermovision Camera for Efficiency Analysis of Solar Cell</li><li>Study on the Microstructure of Polycrystalline Silicon Films Treated with Line Shaped Electron Beam</li><li>Study on the Oxidation and Electrical Resistivity of Reaction-Bonded Silicon Carbide at High Temperature</li><li>Surface Modification of a Dental Ti by Blasted Coating of Bio-Active Calcium Phosphate</li><li>Synergistic Effect of Hybrid Filler Contained Composites on Thermal Conductivity</li><li>The Behavior of Phase Transformation Characteristics and Ageing on Alloying Method of CuZnAl Shape Memory Alloy</li><li>The Influence of Microstructure on the Friction Properties of Carbon/Carbon Composites </li><li>Ti-Ca-P Films Formed by RF Magnetron Sputtering Method Using Dual Targets</li><li>Fabrication and Characterization of Slag Fiber by Melt Extraction</li><li>A Study of Alternative Construction Materials for Slag Derived from Steel Making Industry</li><li>A Study on Thermal Stabilization of Spent Foundry Sand</li><li>A Window of Opportunity: Designing Carbon Nanomaterials for Environmental Safety and Health</li><li>Application in Up-Flow Filtration of Filter Material for Urban Stormwater Control </li><li>Application of Gypsum Granule as a Capping Material to Reduce Phosphorus Release from Sediment of Lake Paldang</li><li>Beneficial Reuse of Coal Fly-Ash as Porous Reactive Aggregates for Removal of Hydrogen Sulfide</li><li>Changing Morphology and Crystal Structure in Ettringite by Trivalent Chromium</li><li>Characteristic of Carbonation Reaction from Municipal Solid Waste Incinerator Bottom Ash as a Function of Water Content and their Effect on the Stabilization of Copper and Lead</li><li>Conversion of Used Glass Bottles to Porous Materials by Using Hydrothermal Technique</li><li>Design of Glass-Ceramic Matrix by Modification of Microstructure for High Strength LTCC Application</li><li>Development of Artificial Soil Using Sewage Sludge</li><li>Dielectric Properties of Sol Infiltrated Lead Zirconate Titanate Ferroelectric Thick Films</li><li>Effect of Grinding and Extraction of Lignocellulosic Fiber on Oil Sorption</li><li>Effect of Magnetic Separation in Heavy Metals of Municipal Solid Waste Incineration Bottom Ash</li><li>Efficiency of Gypsum as a Capping Material for the Capturing of Phosphorus Release from Contaminated Lake Sediments</li><li>Evaluation of Capping Materials for the Stabilization of Contaminated Sediments</li><li>Evaporation and Stabilization of Heavy Metals with Colloid/Interface Properties in EAF Dust-Clay Bodies</li><li>Filtration Treatment of Pollutants in Urban Runoff Using Expanded Polypropylene Media</li><li>Grain Size and Orientation Control in Lead-Free (Bi,La)₄Ti₃O₁₂ Thin Film Deposited by Spin-On Method for High Density FeRAM Device</li><li>Impact Sound Reduction Analysis of Concrete Slab Containing Artificial Lightweight Aggregates Fabricated Using a Sewage Sludge</li><li>Investigation of Plasticity Index of Clay Bodies Including Bottom Ashes from the Power Plant</li><li>Performance of Bismuth Oxide in the Cathaphoretic Epoxy Primers</li><li>Preparation and Standardization of Method for Valuable Metals Analysis in Seawaters</li><li>Preparation of Adsorbent from Mine Residues</li><li>Properties of Artificial Aggregate for Orchid Culture Fabricated from Solid Wastes</li><li>Properties of Waste Derived Mullite</li><li>Quality Characteristics of MSWI Ash Melted Slag by Crystallization</li><li>Recovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium Silicate</li><li>Recycling of Waste Rock as a Filler to Prevent Ground Subsidence</li><li>Reliability Evaluation of Underfill Encapsulated Pb-Free Flip Chip Package under Thermal Shock Test</li><li>Remodeling Techniques of Water Storage Tanks and Residual Chlorine Remaining Devices</li><li>Soft Ground Improvements Using Natural Fiber</li><li>Structural and Electrical Properties of Lead Zirconate Titanate Thick Films Fabricated by Screen-Printing Method</li><li>Utilization of Waste Tires to Reduce Railroad Vibration</li><li>Solid State Foaming and Free-Forming of Closed Pore Utilizing the Superplasticity of Zirconia Ceramics</li><li>A Study on Supercooling Characteristics of Clathrate Compounds with Concentration of TMA</li><li>Apatite Formation on Silicon Suboxide Film Prepared by Pulsed Metal Vacuum Arc Depositon</li><li>Apatite Formation on Surface of Plasma-Sprayed TiO₂ Coating by Sulfuric Acid Treatment</li><li>Application of Cr-X-N Thin Film to Improve the Tribological Properties of Environment Friendly Hydraulic Components</li><li>Application of Filtration System to Control Urban Non-Point Pollution</li><li>Bi-Axial Stretchable Electrode Based on the Thin PDMS Substrate for the Biomedical Applications</li><li>Characteristics of Calcium Trisulphoaluminate Hydrates for Rapid Hardening of Cement Composites</li><li>Characteristics of Silica Aerogel Composites Synthesized by Ambient Drying Method</li><li>Characterization and Fabrication of Nano-Sized Patterns and Microfluidic Channels Derived from Polyvinylsilazane via Soft Lithographic Technique</li><li>Characterization of Automobile Shredder Residues for Chlorine Content and Estimation of it's Circulation in Cement Kiln</li><li>Characterization of Nano-Rod ZnWO₄ Prepared by Surfactant-Assisting Solvothermal Reaction</li><li>Chemical and Electrical Properties of ZnS Deposited with DEZ and H₂S by Atomic Layer Deposition Method</li><li>Crystal Growth of Aragonite Precipitated Calcium Carbonate by Seeded Method</li><li>Crystal Growth of KNbO₃ by Solution-Dropping Method</li><li>Decomposition Characteristic of Carbon Tetrafluoride Using 2.45GHz Microwave at Various Gases</li><li>Degradation of Azo Dyes by the Reduction and Oxidation with Nano Sized Zero Valented Iron</li><li>Direct Electroless Copper Plating on Polyimide for FPCB Applications</li><li>Effect of Particle Size on Biocompatibility of Plasma-Sprayed Hydroxyapatite Coatings</li><li>Effect of pH on the Dispersion Stability of Aqueous Ferric Oxide Suspension</li><li>Effect of Platinum Pre-Coating on Isothermal Oxidation Behavior of MCrAlY Coating by Plasma Spray Process</li><li>Effect of Zirconia on the Physical Properties of Cordierite Honeycomb Filter</li><li>Effects of Post-Annealing on the Electrical and Optical Properties of ZnO Thin Films Grown on Al₂O₃ Substrates by Atomic Layer Epitaxy</li><li>Effect of Several Factors on the Synthesis of Calcium Hydroxide Prepared by Spray Drying Method Using Limestone</li><li>Effects of Y₂O₃ on the Piezoelectric Properties of PSN-PMN-PZT Composition under Various Alternating Electric Fields</li><li>Fabrication and Evaluation of the Novel Elastomer Based Nanocomposite with Pressure Sensing Function</li><li>Fabrication and Thermoelectric Properties of p-Type Si_0.8Ge_0.2 Alloy Doped with Boron</li><li>Fabrication of Al₂O₃ Microtubes Using Carbon Fibers and Al/ Al₂O₃ Mixed Powder in Solid-Vapor Reaction (SVR) Process</li><li>Field Effect Transistor with ZnS Active Layer on ITO/Glass Substrate</li><li>Growth Behavior of Carbon Tips Grown by Electron Beam Induced Deposition Method</li><li>Hot-Pressed AlN/BN Composite with Excellent Mechanical and Thermal Properties</li><li>Microstructural and Mechanical Properties of Polymer-Based Scaffolds Reinforced by Hydroxyapatite</li><li>Oxidation of IG-11 Graphite by Air and CO₂ Gas</li><li>Parameters Affecting the Structure and Yield of Carbon Nanotubes in CVD Method</li><li>Phase Transformation of Nanocrystalline CdS Synthesized by Solvothermal Reaction</li><li>Porous Scaffold of n-HA/PA66/CS for Tissue Regeneration</li><li>Preparation and Characterization of Alumina Nanoparticles from Alkoxides and Na (AOT) Surfactant</li><li>Preparation and Characterization of n-HA/Chitosan Scaffold Prepared by a New Method of Emulsion-Foaming/Freeze-Drying Process</li><li>Preparation of Nano-Hydroxyapatite/Polyamide6 Composite Porous Scaffold for Bone Tissue Engineering</li><li>Preparation of Nano-Size PbTiO₃ Particles and its Characteristics on the Adsorption of Organic Acids</li><li>Preparation of Nano-Sized Ag Metal Colloid by an Advanced Wet-Process Using 3-Mercapto-Propionic Acid</li><li>Preparation of Properties of Biodegradable Membranes Using Natural Polymer/Clay Nanocomposite for the Application of Dehumidification</li><li>Properties of Organic/Inorganic Hybrid Material Synthesized from Acrylic Resin and Silane-Terminated CS</li><li>Properties of Sol-Gel Coating Film from Colloidal Silica-Silane Sol</li><li>Properties of Transparent Color Coating Glass Fabricated by Sol-Gel Technology</li><li>Sintering and Mechanical Properties of Alumina Ceramics Prepared by Nanosize Alumina</li><li>Spark Plasma Sintering Behavior of Fe-TiC Composite Materials Fabricated by Mechanical Alloying</li><li>Stability Enhancement for Cold Field Emitter for Reliable Operation of the Micro-Column System</li><li>Study on Indium Tin Oxide Films Deposited Using Different Conductive ITO Targets by DC Magnetron Sputtering</li><li>Study on Non-Destructive Testing of Aerial Complex Material by DSPI</li><li>Study on Silver-Containing HA Coatings Prepared by Vacuum Plasma Spraying</li><li>Study on the Precise Alignment of Micro-Lenses in the Microcolumn by Using the Laser Diffraction Pattern</li><li>A Study on Vacuum Plasma Spraying Tungsten Coatings</li><li>Supercritical Impregnation of Organic Phase Change Materials into Polyester Fiber</li><li>Surface Modification of Li (Co_1/3Mn_1/3Ni_{1/ 3})O₂ Fine Powders Using Aqueous Al₂O₃ Sol</li><li>Synthesis and Characterization of Ag-Pd Nanoparticles by a Reverse Micelle Process</li><li>Synthesis and Characterization of CoFe₂O₄ Nanoparticles by Glycothermal Process</li><li>Synthesis and Characterization of Nano-Size CoAl₂O₄ Spinel Powder Using Sol-Gel Process</li><li>Synthesis and Characterization of Sr_1-xLa_xFe_12-yCo_yO₁₉ Nanoparticles Prepared by a Sol-Gel Method Using Propylene Oxide</li><li>Recovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium Silicate</li><li>Synthesis of Precipitated Calcium Carbonate Using a Limestone and its Application in Paper Filler and Coating Color</li><li>The Behavior of Automobile Shredder Residue Chips in a Precalciner for Cement Manufacturing Process</li><li>The Effect of Applied Pressure on the Nonlinear Behavior of ZnO Based Ceramics</li><li>The Effect of Processing Additives on Dispersion and Rheological Properties of Freeze Casting Alumina/Zirconia and Mullite/Zirconia Slurries</li><li>The Influence of Preparation Condition on Nano-Hydroxyapatite Prepared in Different Solvent</li><li>Preparation of CuO Nanopowder in Aqueous Solution by Applying Ultrasonic and its CO Gas Sensitivity</li><li>The Study on the Application of FLEC Test in Indoor Building Materials</li><li>Thermal Properties and Microstructure of Zirconia/Monazite-Type LaPO₄ Composites for Powder Preparation Methods</li><li>Thermal Properties of Water-Absorbing and Surface Modified Porous Pavements</li><li>Thermoelectric Characteristics of the Electrodeposited (Bi,Sb)₂Te₃ Films with Variation of the Electrodeposition Current Density</li><li>Thermoelectric Properties of Skutterudite CoSb₃ Prepared by Encapsulated Induction Melting</li><li>Thick-Film CO₂ Sensors Based on NASICON Synthesized by a Sol-Gel Process</li><li>Two Types of Phase Separation and Crystal Nucleation-Growth Mechanisms for Machinable Glass Ceramic</li><li>Preparation of Si-B-C System Powder Using Silicon, Boron, and Boron Carbide</li><li>Dependence of the Dielectric Properties of Pt/ZrO₂/Si Capacitors Prepared by RF-Magnetron Sputtering on the Oxygen Partial Pressure and the Annealing Temperature</li><li>Fabrication of n-HA/CS Porous Scaffold Carrying Ampicillin-Loaded Microspheres</li><li>A Study on the Electrochemical Properties of PEO-Carbon Composite Polymer Electrolytes for Lithium/Sulfur Battery</li><li>Characteristics of Fluorine-Doped Tin Oxide Thin Films on Poly Ethylene Terephthalate (PET) Substrate</li><li>Cu/GDC Cermet Anodes by Sintering via Surface Modification with MgO Sol</li><li>Cycling Performance of LiFePO₄ as the Cathode Materials for Lithium Polymer Batteries</li><li>Densification and Dielectric Properties of Glass/Ceramic Composites Sintered with Various Borosilicate Glass</li><li>Design of Manufacturing Process of Oxygen-Free High Conductivity Copper Using Mahalanobis-Distance Outlier Detection Method</li><li>Development of Honeycomb-Type Solid Oxide Fuel Cell Consisting of LaGaO₃ Electrolyte</li><li>Effect of Metal Additives (Co and Ni) on the Electrochemical Properties of Lithium/FeS₂ Batteries </li><li>Electrically Conducting Silk Fibroin Microspheres by Incorporation of Multiwalled Carbon Nanotubes on their Surfaces</li><li>Electrochemical Influence of Collagen Piezoelectric Effect in Bone Healing</li><li>Electrochemical Properties of Perovskite Cathode for Solid Oxide Fuel Cell</li><li>Evaluation on Some Metallic Alloys for SOFC Interconnect</li><li>Experimental Study on the Effects of the Performance of Polymer Electrolyte Membrane Fuel Cell</li><li>Influence of Hydrogen Sulfide in Fuel on Electric Power of Solid Oxide Fuel Cell</li><li>In-Situ Gold Nanoparticle Generation Using a Small-Sized Ceramic Heater with a Local Heating Area</li><li>Intermediate Temperature Steam Electrolysis Using Doped Lanthanum Gallate Solid Electrolyte (2) Effects of CeO₂ Interlayer on Activity</li><li>Modeling of Electrochemical-Mechanical Deformations of Ionic Polymer Metal Composite</li><li>Nano Composite Membranes of Sulfonated Poly (Ether Ketone)/ Poly (Ether Sulfone) Copolymer and SiO₂ for Fuel Cell Application</li><li>Nanoporous Titania by Embossing with PMMA Nanopoles Made from Nanoporous Alumina Template</li><li>Novel Pt-Tm/Carbon Nanocomposite for the Catalyst of Direct Methanol Fuel Cell</li><li>Observation of Effective Micro-Organisms Attached on Porous Ceramics</li><li>Preparation and Characterization of High-Power Anode Materials Using Soft Carbon Precursors for Lithium Ion Battery</li><li>Preparation of High Lithium-Ion Conductive Ceramic</li><li>Properties of Coating Films Synthesized from Colloidal Silica and Methyltrimethoxysilane</li><li>Properties of Sol-Gel Coating Film Synthesized from Nano Boehmite and Methyltrimethoxysilane</li><li>Recovery of Nickel from Anode Materials of Spent Ni-MH Batteries and its Catalytic Property for CH₄ Dry Reforming</li><li>Solvent Effect on Ion Hopping of Solid Polymer Electrolyte</li><li>Strengthening of Water Glass Based Aerogel by TEOS</li><li>Structural and Electrochemical Properties of a Si/C/Cu Film Anode Electrode</li><li>Study on the Electrical Properties of Direct-Patternable SBT Films Formed by Photochemical Metal-Organic Deposition</li><li>Synthesis and Characterization of Multi-Sulfonated Poly(Aryl Ether Ketone)s Proton Exchange Membranes</li><li>Synthesis and Sintering of La_0.8Sr_0.2CrO₃ for the Separator of SOFC</li><li>The Discharge Properties of Nickel Sulfide Thin Film Prepared from Sulfidation of Nickel Foil</li><li>The Effects of Oxygen Partial Pressure on Interface States and Ferroelectric Properties of PZT/PbO/Si (MFIS) Structures</li><li>Electrochemical and Optical Properties of WO₃ Prepared by Sol-Gel Coating</li></ul>