Eco-Materials Processing and Design VIII

A Study Regarding the Diminutive Effect of Emission of Indoor Air Pollutant (HCHO, TVOC) from After-Treatment Materials such as Ceramic and CatalystA Textile Waste Water Treatment System Using Photocatalytic Reactor and Catalyst Recycle UnitAdhesion Improving of TiO2-Coated FabricsAg-Doped TiO2 Immobilized on Al2O3 Bead as Oxidation CatalystAntenna Mechanism and De-Aggregation Concept: Novel Mechanistic Principles for PhotocatalysisCatalytic Decomposition of Methane: Effect of Various Factors on Catalytic PropertiesCharacterization and Wettability of TiO2 Films Deposited by Mid-Frequency Magnetron Reactive SputteringCharacterization of Flame-Generated TiO2 Deposited Activated Carbon Fibers (ACF)Control of Organic Micropollutants Using Dual Functional Adsorbent/Catalyst SystemCrystalline Phases and Particle Characteristics of the Combustion-Synthesized TiO2 Nanoparticles Design of Rotational Particle Structure with Negative Poisson?s Ratio Using Numerical MethodEffect of Deformation Temperature and Strain on Recrystallization Behavior of a Nb Micro-Alloyed SteelEffects of Dye Mixing on Photocatalytic Splitting of H2O into H2 and O2 on KTaO3Emergence Change of Carbon Dioxide from Artificial Skin by Titania PhotocatalystEnhanced Photocatalytic Activities of Ta2O5 and Nitrogen Co-Doped TiO2 under Visible Light IrradiationGrowth and Microstructure of Gallium Phosphide Nanowires Synthesized by the CVD Method Using Copper Oxide as a CatalystHigh-Aspect-Ratio Titanium Oxide Nanotubes Anodized in KH2PO4/NH4F/Citric Acid ElectrolytesHydrothermal Synthesis of Nanosized TiO2 Using Basic Peptizing Agents and their Photocatalytic Activity on the Decomposition of Orange IIImproved Adhesion to ABS Plastics by a Photocatalytic ReactionInhibition Effects of Inorganic and Polymer Coagulants on Acidogenic Fermentation A Study for Synthesis of Nanobelt and Nanowire Nickel Powders by Wet Chemical MethodNano-Al2O3 Reinforced Fe-Cr-Ni Composites Fabricated by Reactive Hot Pressing NOx and SOx Removal by Low Temperature Plasma-Photocatalysts Hybrid SystemPerformance of Photocatalytic Microfiltration with Hollow Fiber MembranePhase Transformation of TiO2 in the Preparation of Pearlescent PigmentPhotocatalytic Activity of Doped NaTaO3 and NaNbO3: (Y, La, Nd, Sm) Sol Gel on Degradation of Rhodamine B by UV IrradiationPhotocatalytic and Photoelectrochemical Properties of Nitrogen-Substituted TiO2 Thin Films Prepared by an RF Magnetron Sputtering Deposition MethodPhotocatalytic Degradation of NO2- by Fe3+-Doped TiO2 Nano Particles Prepared by Sol-Gel MethodPhotocatalytic Degradation of Organics Diluted in Water Using TiO2 Loaded on Fluoride-Modified Mesoporous SilicaPreparation of CeO2 Nanophotocatalyst Using Precipitation MethodPreparation of Mesostructured Carbon (MSC) for Removal of Natural Organic Matter (NOM) in Aqueous SolutionPreparation of TiO2/SiO2 Hybrid Hardcoatings on Stainless Steel and its Photocatalytic Effect Removal of Heavy Metal Ions from Aqueous Solution by Manganese Dioxide-Coated Polypropylene Granules: An Implication of Rainwater Runoff TreatmentRemoving Algae with Pt-Doped TiO2 Coatings on Foamed GlassSuspension Stability of BaTiO3 Nanoparticles under Electrical Applied FieldSynthesis of Titania Nanoparticles via Spark Discharge Method Using Air as a CarrierSynthesis, Preparation and Catalytic Activities of V-Doped TiO2 Gel Coating on Porous a-Al2O3 Beads The Effect of Isothermal Heat Treatment on the Rolling Contact Fatigue of Carburized Low Carbon Microalloyed SteelMechanism of PVC?s Solid-Phase Photocatalytic Degradation Enhanced by PlasmaTitania Coating of Wasted Silica Particles and their Photocatalytic PropertyVisible Light Response of ZrO2 by Nitriding and its Photocatalytic ActivityVisible-Light Activity of N-Doped TiO2 Powders and their ApplicationsXPS Investigation of Passive Layer on Copper-Bearing Antibacterial Ferrite Stainless SteelEffect of Sn-Addition on the Bonding Strength between Casting Au-Pt-Cu Alloy and SiO2-Based PorcelainA Study on Boiling Heat Transfer Augmentation of Heating Process Using Ultrasonic VibrationsA Study on High Temperature Oxidation of Titanium Alloys in Solid State Bonding ProcessAffinity of Cd and Ni on IDA Immobilized Magnetic Beads with Different Lengths of Spacer Arms Antimicrobial Characteristics of Metal Deposited ACF FiltersApplication of Inclined Cooling Plate to Fabrication of Semi-Solid Cast Iron Application of Platinum and Titanium Materials as an Electrode for Hygiene Purpose Axial Compression and Bending Characteristics of CFRP Hat Shaped Member According to Orientation AngleComparison of Intensity Method and Counting Method in Measurement of Fiber Orientation Angle Distribution Using Image ProcessingDeformation Behavior of Functionally Graded Ti-Ni Shape Memory AlloysDeposition and Characterization of D-Gun Sprayed WC-Co Coating with Self-Lubricating PropertyDevelopment of Eco-Flux Laminated Strip for Air Atmosphere BrazingDevelopment of Miniaturized Micro Metal Forming Manufacturing SystemDistribution and Shape of the Pores in Water Permeable ConcreteDome-Shaped High Power Transformer for Driving A 61 W T5 LampEffect of Aging on Damping Capacity of AZ91 AlloyEffect of Annealing on the Mechanical Property and Machinability of Free-Cutting Phosphor Bronze AlloyEffect of Annealing Treatment on Solid State Recycled Magnesium Alloy AZ91DEffect of Cr on the High Temperature Corrosion of Al3Ti-Cr Alloys in SO2 AtmosphereEffect of Dam Design on the Fluid Flow in T-Shaped Continuous Casting TundishEffect of Load on the Abrasive Wear of Silica-Filled Epoxy Resin CompositesEffect of Product Quality on Life Cycle Assessment in Aluminum Die Casting ProcessEffect of Rare Earth on the Microstructure and Performance of SnAgCuRE SolderEffect of the Size of the Reinforcement Phased on the Properties of Silica-Filled Composites Effect of Thermo-Mechanical Processing on Microstructure and Elastic Modulus of Metastable Ti-Nb-Si Alloys for Biomedical ApplicationEffects of Homogenization Treatment on Thermoelectric Properties of Ba8Al16Si30Effects of Isothermal Heating Process and Rare Earth Elements Addition on the Mechanical Properties of Semi-Solid Formed Mg-5%Zn AlloysEffects of Manganese on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Processed by Differential Speed RollingEffects of Processing Factors on the Mechanical Properties of PBO Filament/ Epoxy Composite MaterialsEffects of RPM, Bath Temperature and Anodizing Time in Anodizing for Mg-Al Alloy under Constant Current Effects of Samarium on Microstructure and Mechanical Properties of Mg-Al-Ca Alloys Electromagnetic Absorption Behaviors of Ferromagnetic Fe-Cr Alloy Powder and Polymer Composites in the Radio Frequency RangeElectromagnetic Properties of Bi System SuperconductorEvaluation of Indentation Test for Measuring Young?s Modulus of Cancellous Bone Evaluations of Microstructure and Hydrogenation Properties on Mg2NiHx Hydrogen Absorbing Alloys by Hydrogen Induced Mechanical Alloying Evolution of Al Alloy Melt Foam Pore Structure in Foaming ProcessExtrudability Improvement of 7000 Series Al Wrought Alloys by ThixoextrusionFabrication of Lotus-Type Porous Ni-(15, 28 and 31) at.% Al Alloys by Unidirectional Solidification in Hydrogen Atmosphere Finite Element Analysis for Precision Forging Process of United Transfer Driven Parking GearFormation of Boride Eutectic with Addition of Boron in Mod. 12Cr-1Mo SteelsGlass-Polydimethysiloxane Hybrid Microthermostat for Restriction Enzyme Digestion Hertzian Indentation Damage Behavior of Highly Porous Silicon NitridesHigh Temperature Corrosion of Ti3AlC2 in Ar-1%SO2 AtmosphereHollow Amorphous Formation via Oxidation of Al Nanoparticles at Low TemperaturesHybrid Tooling Using High Speed Cutting and Ceramic Filled SLA (StereoLithography Apparatuses) TechnologiesIdentification of Phases in the Wide-Gap Region Brazed with BNi-3 Filler Metal Powder Using Electron Backscatter DiffractionInfluence of Interlayer on the Corrosion Behavior of Multilayered WC-Ti1-xAlxN Coatings in Deaerated 3.5% Sodium Chloride SolutionInfluence of Particles on Cell Structure of Al-Mg Alloys Foamed by Melt Foaming MethodInfluence of Process Parameters on the Adhesive Strength of CrN Coatings Influence of Reheating Profile on Microstructural Evolution of 2024 Al Wrought Alloy for ThixoextrusionInfluence of the Ball Diameter, Material and Taper Design on Transferred Stresses of Ceramic THRInfluence of Zircon Addition on Thermal Shock Resistance of ZTA for Plasma ReactorsIn-Situ Joining of Combustion Synthesized Ni3Al Intermetallic Compounds with AZ91D Mg AlloyIn?Situ Synthesis of Cop/Cu Coating by Laser Cladding Investigation of Thermal Shock Behaviors for Machinable SiC/h-BN Ceramic CompositesMechanical Properties and Formability of AZ31 Magnesium Alloy Processed by Differential Speed RollingMicrostructural Evolution and Crystal Orientation of Electromagnetically Stirred Al Alloy in the Semi-Solid StateMicrostructure Analysis and Characterization of Li(Ni1-xCox)O2 Thin Film Prepared by Li Diffusion on Ni-Co Alloy Substrates for Cathode ApplicationMicrostructure and Formability of Different-Speeds Rolled AZ31 Mg SheetMicrostructure and High Temperature Mechanical Properties of Inconel 617Microstructure and Mechanical Properties of Si3N4/hBN Composites Prepared by Hot-Pressing Using Nitrided Si3N4 PowdersNoncombustible Magnesium Alloy Processed by Rotary-Die Equal Channel Angular Pressing MethodPassive-Active Transition Behavior of 304 Stainless SteelPrediction of Temperature Distribution during Curing Thick Thermoset Composite LaminatesProcessing and Properties of Al Based Amorphous/Crystalline Alloy CompositesProcessing, Microstructure and Mechanical Properties of Hybrid Materials with Al-Mg Alloy and its CompositesProduct Geometry for Process Parameter during Rotary Swaging Process as Chipless Forming ProcessRecycling of 6061 Aluminum Alloy Cutting Chips Using Hot Extrusion and Hot RollingResearch on High-Purified Lignin ThermoplasticsResidual Stress Measurement of Plasma Sprayed Coating Layers in ZrO2Strength of AZ31 Alloys Subject to Severe Deformation by ECAP and DSRStructure?Mechanical Properties Correlation in a Hydrogenated Ti-Based In-Situ Amorphous Matrix CompositeStudies on Rheological Property and Miscibility of Lignosulfonate/Polystyrene BlendsStudy on the Application of Infrared Thermovision Camera for Efficiency Analysis of Solar CellStudy on the Microstructure of Polycrystalline Silicon Films Treated with Line Shaped Electron BeamStudy on the Oxidation and Electrical Resistivity of Reaction-Bonded Silicon Carbide at High TemperatureSurface Modification of a Dental Ti by Blasted Coating of Bio-Active Calcium PhosphateSynergistic Effect of Hybrid Filler Contained Composites on Thermal ConductivityThe Behavior of Phase Transformation Characteristics and Ageing on Alloying Method of CuZnAl Shape Memory AlloyThe Influence of Microstructure on the Friction Properties of Carbon/Carbon Composites Ti-Ca-P Films Formed by RF Magnetron Sputtering Method Using Dual TargetsFabrication and Characterization of Slag Fiber by Melt ExtractionA Study of Alternative Construction Materials for Slag Derived from Steel Making IndustryA Study on Thermal Stabilization of Spent Foundry SandA Window of Opportunity: Designing Carbon Nanomaterials for Environmental Safety and HealthApplication in Up-Flow Filtration of Filter Material for Urban Stormwater Control Application of Gypsum Granule as a Capping Material to Reduce Phosphorus Release from Sediment of Lake PaldangBeneficial Reuse of Coal Fly-Ash as Porous Reactive Aggregates for Removal of Hydrogen SulfideChanging Morphology and Crystal Structure in Ettringite by Trivalent ChromiumCharacteristic of Carbonation Reaction from Municipal Solid Waste Incinerator Bottom Ash as a Function of Water Content and their Effect on the Stabilization of Copper and LeadConversion of Used Glass Bottles to Porous Materials by Using Hydrothermal TechniqueDesign of Glass-Ceramic Matrix by Modification of Microstructure for High Strength LTCC ApplicationDevelopment of Artificial Soil Using Sewage SludgeDielectric Properties of Sol Infiltrated Lead Zirconate Titanate Ferroelectric Thick FilmsEffect of Grinding and Extraction of Lignocellulosic Fiber on Oil SorptionEffect of Magnetic Separation in Heavy Metals of Municipal Solid Waste Incineration Bottom AshEfficiency of Gypsum as a Capping Material for the Capturing of Phosphorus Release from Contaminated Lake SedimentsEvaluation of Capping Materials for the Stabilization of Contaminated SedimentsEvaporation and Stabilization of Heavy Metals with Colloid/Interface Properties in EAF Dust-Clay BodiesFiltration Treatment of Pollutants in Urban Runoff Using Expanded Polypropylene MediaGrain Size and Orientation Control in Lead-Free (Bi,La)4Ti3O12 Thin Film Deposited by Spin-On Method for High Density FeRAM DeviceImpact Sound Reduction Analysis of Concrete Slab Containing Artificial Lightweight Aggregates Fabricated Using a Sewage SludgeInvestigation of Plasticity Index of Clay Bodies Including Bottom Ashes from the Power PlantPerformance of Bismuth Oxide in the Cathaphoretic Epoxy PrimersPreparation and Standardization of Method for Valuable Metals Analysis in SeawatersPreparation of Adsorbent from Mine ResiduesProperties of Artificial Aggregate for Orchid Culture Fabricated from Solid WastesProperties of Waste Derived MulliteQuality Characteristics of MSWI Ash Melted Slag by CrystallizationRecovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium SilicateRecycling of Waste Rock as a Filler to Prevent Ground SubsidenceReliability Evaluation of Underfill Encapsulated Pb-Free Flip Chip Package under Thermal Shock TestRemodeling Techniques of Water Storage Tanks and Residual Chlorine Remaining DevicesSoft Ground Improvements Using Natural FiberStructural and Electrical Properties of Lead Zirconate Titanate Thick Films Fabricated by Screen-Printing MethodUtilization of Waste Tires to Reduce Railroad VibrationSolid State Foaming and Free-Forming of Closed Pore Utilizing the Superplasticity of Zirconia CeramicsA Study on Supercooling Characteristics of Clathrate Compounds with Concentration of TMAApatite Formation on Silicon Suboxide Film Prepared by Pulsed Metal Vacuum Arc DepositonApatite Formation on Surface of Plasma-Sprayed TiO2 Coating by Sulfuric Acid TreatmentApplication of Cr-X-N Thin Film to Improve the Tribological Properties of Environment Friendly Hydraulic ComponentsApplication of Filtration System to Control Urban Non-Point PollutionBi-Axial Stretchable Electrode Based on the Thin PDMS Substrate for the Biomedical ApplicationsCharacteristics of Calcium Trisulphoaluminate Hydrates for Rapid Hardening of Cement CompositesCharacteristics of Silica Aerogel Composites Synthesized by Ambient Drying MethodCharacterization and Fabrication of Nano-Sized Patterns and Microfluidic Channels Derived from Polyvinylsilazane via Soft Lithographic TechniqueCharacterization of Automobile Shredder Residues for Chlorine Content and Estimation of it?s Circulation in Cement KilnCharacterization of Nano-Rod ZnWO4 Prepared by Surfactant-Assisting Solvothermal ReactionChemical and Electrical Properties of ZnS Deposited with DEZ and H2S by Atomic Layer Deposition MethodCrystal Growth of Aragonite Precipitated Calcium Carbonate by Seeded MethodCrystal Growth of KNbO3 by Solution-Dropping MethodDecomposition Characteristic of Carbon Tetrafluoride Using 2.45GHz Microwave at Various GasesDegradation of Azo Dyes by the Reduction and Oxidation with Nano Sized Zero Valented IronDirect Electroless Copper Plating on Polyimide for FPCB ApplicationsEffect of Particle Size on Biocompatibility of Plasma-Sprayed Hydroxyapatite CoatingsEffect of pH on the Dispersion Stability of Aqueous Ferric Oxide SuspensionEffect of Platinum Pre-Coating on Isothermal Oxidation Behavior of MCrAlY Coating by Plasma Spray ProcessEffect of Zirconia on the Physical Properties of Cordierite Honeycomb FilterEffects of Post-Annealing on the Electrical and Optical Properties of ZnO Thin Films Grown on Al2O3 Substrates by Atomic Layer EpitaxyEffect of Several Factors on the Synthesis of Calcium Hydroxide Prepared by Spray Drying Method Using LimestoneEffects of Y2O3 on the Piezoelectric Properties of PSN-PMN-PZT Composition under Various Alternating Electric FieldsFabrication and Evaluation of the Novel Elastomer Based Nanocomposite with Pressure Sensing FunctionFabrication and Thermoelectric Properties of p-Type Si0.8Ge0.2 Alloy Doped with BoronFabrication of Al2O3 Microtubes Using Carbon Fibers and Al/ Al2O3 Mixed Powder in Solid-Vapor Reaction (SVR) ProcessField Effect Transistor with ZnS Active Layer on ITO/Glass SubstrateGrowth Behavior of Carbon Tips Grown by Electron Beam Induced Deposition MethodHot-Pressed AlN/BN Composite with Excellent Mechanical and Thermal PropertiesMicrostructural and Mechanical Properties of Polymer-Based Scaffolds Reinforced by HydroxyapatiteOxidation of IG-11 Graphite by Air and CO2 GasParameters Affecting the Structure and Yield of Carbon Nanotubes in CVD MethodPhase Transformation of Nanocrystalline CdS Synthesized by Solvothermal ReactionPorous Scaffold of n-HA/PA66/CS for Tissue RegenerationPreparation and Characterization of Alumina Nanoparticles from Alkoxides and Na (AOT) SurfactantPreparation and Characterization of n-HA/Chitosan Scaffold Prepared by a New Method of Emulsion-Foaming/Freeze-Drying ProcessPreparation of Nano-Hydroxyapatite/Polyamide6 Composite Porous Scaffold for Bone Tissue EngineeringPreparation of Nano-Size PbTiO3 Particles and its Characteristics on the Adsorption of Organic AcidsPreparation of Nano-Sized Ag Metal Colloid by an Advanced Wet-Process Using 3-Mercapto-Propionic AcidPreparation of Properties of Biodegradable Membranes Using Natural Polymer/Clay Nanocomposite for the Application of DehumidificationProperties of Organic/Inorganic Hybrid Material Synthesized from Acrylic Resin and Silane-Terminated CSProperties of Sol-Gel Coating Film from Colloidal Silica-Silane SolProperties of Transparent Color Coating Glass Fabricated by Sol-Gel TechnologySintering and Mechanical Properties of Alumina Ceramics Prepared by Nanosize AluminaSpark Plasma Sintering Behavior of Fe-TiC Composite Materials Fabricated by Mechanical AlloyingStability Enhancement for Cold Field Emitter for Reliable Operation of the Micro-Column SystemStudy on Indium Tin Oxide Films Deposited Using Different Conductive ITO Targets by DC Magnetron SputteringStudy on Non-Destructive Testing of Aerial Complex Material by DSPIStudy on Silver-Containing HA Coatings Prepared by Vacuum Plasma SprayingStudy on the Precise Alignment of Micro-Lenses in the Microcolumn by Using the Laser Diffraction PatternA Study on Vacuum Plasma Spraying Tungsten CoatingsSupercritical Impregnation of Organic Phase Change Materials into Polyester FiberSurface Modification of Li (Co1/3Mn1/3Ni1/ 3)O2 Fine Powders Using Aqueous Al2O3 SolSynthesis and Characterization of Ag-Pd Nanoparticles by a Reverse Micelle ProcessSynthesis and Characterization of CoFe2O4 Nanoparticles by Glycothermal ProcessSynthesis and Characterization of Nano-Size CoAl2O4 Spinel Powder Using Sol-Gel ProcessSynthesis and Characterization of Sr1-xLaxFe12-yCoyO19 Nanoparticles Prepared by a Sol-Gel Method Using Propylene OxideRecovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium SilicateSynthesis of Precipitated Calcium Carbonate Using a Limestone and its Application in Paper Filler and Coating ColorThe Behavior of Automobile Shredder Residue Chips in a Precalciner for Cement Manufacturing ProcessThe Effect of Applied Pressure on the Nonlinear Behavior of ZnO Based CeramicsThe Effect of Processing Additives on Dispersion and Rheological Properties of Freeze Casting Alumina/Zirconia and Mullite/Zirconia SlurriesThe Influence of Preparation Condition on Nano-Hydroxyapatite Prepared in Different SolventPreparation of CuO Nanopowder in Aqueous Solution by Applying Ultrasonic and its CO Gas SensitivityThe Study on the Application of FLEC Test in Indoor Building MaterialsThermal Properties and Microstructure of Zirconia/Monazite-Type LaPO4 Composites for Powder Preparation MethodsThermal Properties of Water-Absorbing and Surface Modified Porous PavementsThermoelectric Characteristics of the Electrodeposited (Bi,Sb)2Te3 Films with Variation of the Electrodeposition Current DensityThermoelectric Properties of Skutterudite CoSb3 Prepared by Encapsulated Induction MeltingThick-Film CO2 Sensors Based on NASICON Synthesized by a Sol-Gel ProcessTwo Types of Phase Separation and Crystal Nucleation-Growth Mechanisms for Machinable Glass CeramicPreparation of Si-B-C System Powder Using Silicon, Boron, and Boron CarbideDependence of the Dielectric Properties of Pt/ZrO2/Si Capacitors Prepared by RF-Magnetron Sputtering on the Oxygen Partial Pressure and the Annealing TemperatureFabrication of n-HA/CS Porous Scaffold Carrying Ampicillin-Loaded MicrospheresA Study on the Electrochemical Properties of PEO-Carbon Composite Polymer Electrolytes for Lithium/Sulfur BatteryCharacteristics of Fluorine-Doped Tin Oxide Thin Films on Poly Ethylene Terephthalate (PET) SubstrateCu/GDC Cermet Anodes by Sintering via Surface Modification with MgO SolCycling Performance of LiFePO4 as the Cathode Materials for Lithium Polymer BatteriesDensification and Dielectric Properties of Glass/Ceramic Composites Sintered with Various Borosilicate GlassDesign of Manufacturing Process of Oxygen-Free High Conductivity Copper Using Mahalanobis-Distance Outlier Detection MethodDevelopment of Honeycomb-Type Solid Oxide Fuel Cell Consisting of LaGaO3 ElectrolyteEffect of Metal Additives (Co and Ni) on the Electrochemical Properties of Lithium/FeS2 Batteries Electrically Conducting Silk Fibroin Microspheres by Incorporation of Multiwalled Carbon Nanotubes on their SurfacesElectrochemical Influence of Collagen Piezoelectric Effect in Bone HealingElectrochemical Properties of Perovskite Cathode for Solid Oxide Fuel CellEvaluation on Some Metallic Alloys for SOFC InterconnectExperimental Study on the Effects of the Performance of Polymer Electrolyte Membrane Fuel CellInfluence of Hydrogen Sulfide in Fuel on Electric Power of Solid Oxide Fuel CellIn-Situ Gold Nanoparticle Generation Using a Small-Sized Ceramic Heater with a Local Heating AreaIntermediate Temperature Steam Electrolysis Using Doped Lanthanum Gallate Solid Electrolyte (2) Effects of CeO2 Interlayer on ActivityModeling of Electrochemical-Mechanical Deformations of Ionic Polymer Metal CompositeNano Composite Membranes of Sulfonated Poly (Ether Ketone)/ Poly (Ether Sulfone) Copolymer and SiO2 for Fuel Cell ApplicationNanoporous Titania by Embossing with PMMA Nanopoles Made from Nanoporous Alumina TemplateNovel Pt-Tm/Carbon Nanocomposite for the Catalyst of Direct Methanol Fuel CellObservation of Effective Micro-Organisms Attached on Porous CeramicsPreparation and Characterization of High-Power Anode Materials Using Soft Carbon Precursors for Lithium Ion BatteryPreparation of High Lithium-Ion Conductive CeramicProperties of Coating Films Synthesized from Colloidal Silica and MethyltrimethoxysilaneProperties of Sol-Gel Coating Film Synthesized from Nano Boehmite and MethyltrimethoxysilaneRecovery of Nickel from Anode Materials of Spent Ni-MH Batteries and its Catalytic Property for CH4 Dry ReformingSolvent Effect on Ion Hopping of Solid Polymer ElectrolyteStrengthening of Water Glass Based Aerogel by TEOSStructural and Electrochemical Properties of a Si/C/Cu Film Anode ElectrodeStudy on the Electrical Properties of Direct-Patternable SBT Films Formed by Photochemical Metal-Organic DepositionSynthesis and Characterization of Multi-Sulfonated Poly(Aryl Ether Ketone)s Proton Exchange MembranesSynthesis and Sintering of La0.8Sr0.2CrO3 for the Separator of SOFCThe Discharge Properties of Nickel Sulfide Thin Film Prepared from Sulfidation of Nickel FoilThe Effects of Oxygen Partial Pressure on Interface States and Ferroelectric Properties of PZT/PbO/Si (MFIS) StructuresElectrochemical and Optical Properties of WO3 Prepared by Sol-Gel Coating