IUMRS International Conference in Asia
IUMRS-ICA 2016
Published on 19. July 2017
Book
Paperback/Softback
2586 pages
978-3-0357-1151-6 (ISBN)
Description
This is the proceedings of the selected papers presented at IUMRS International Conference in Asia (IUMRS-ICA) held in Qingdao, China, Oct. 20-24, 2016. IUMRS-ICA is one of the most important series conferences of International Union of Materials Research Societies (IUMRS).
This is the proceedings of the selected papers presented at IUMRS International Conference in Asia (IUMRS-ICA) held in Qingdao, China, Oct. 20-24, 2016. IUMRS-ICA is one of the most important series conferences of International Union of Materials Research Societies (IUMRS).
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 129 mm
Weight
4720 gr
ISBN-13
978-3-0357-1151-6 (9783035711516)
DOI
10.4028/b-inYm4D
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Software
07/2017
Trans Tech Publications Ltd
€696.45
Shipment within 10-20 days
E-Book
06/2017
Trans Tech Publications Ltd
€211.86
Available for download
Person
Ed. Yafang Han
Content
<ul><li>Chapter 1.1: Highly Efficient Structural Alloys</li><li>Effect of Trace Element Hf on the Precipitation Process and Recrystallization Resistance of Al-Er-Zr Alloys</li><li>Hot Deformation Behavior and Constitutive Equation of 5E61 Aluminum Alloy</li><li>Effect of Deformation Temperature on Texture Evolution of TLM Titanium Alloy</li><li>Effect of A-EMS above Liquidus Temperature on Structure Refinement of Al-11%Zn-3%Mg-1%Cu-0.13%Zr Alloy</li><li>Microstructure, Mechanical and Corrosion Properties of 5E61 Alloy</li><li>The Effect of the Erbium Content on the Microstructure and Mechanical Property of 6061 Aluminum Alloys</li><li>Thermal Stability of Nanocrystalline Ti6Al4V Produced by Surface Mechanical Attrition Treatment</li><li>Effect of Homogenization Temperature on the Microstructure and Property of 6061 Aluminum Alloy with Erbium</li><li>Microstructure and Mechanical Properties of Mg-Er-Zn Alloys with LPSO Phase</li><li>Effect of Cooling Rate on Hot Tearing Behavior of Mg-9Al-1Zn-0.8Ce Alloy</li><li>Effect of Nd Addition on the Microstructure, Mechanical and Corrosion Properties of Mg-Zn-Y-Nd Alloys</li><li>Numerical Simulation and Experimental Verification of Microstructure Evolution during the Seamless Tube Extrusion of Semi-Continuous Casting AZ31 Magnesium Alloy</li><li>Influence of Initial Microstructure on the Hot Working Flow Stress of Mg-3Al-1Zn Alloy</li><li>Effect of Rare-Earth Element Y on the Microstructure and Mechanical Properties of the Mg-6.0wt.%Zn-0.5wt.%Zr Alloy</li><li>Microstructure and Mechanical Property of Mg-Sn-Al Wrought Magnesium Alloys</li><li>Effects of Electromagnetic Stirring Frequency on the Microstructure and Mechanical Properties of Al-7Si-0.42 Mg-0.1Cu Alloy by Semi-Solid Processing</li><li>Protective Ability of Graphite Powder on Molten AZ91D Magnesium Alloy</li><li>Microstructure Evolution of the Mg-3Zn-0.5Er Alloy during Hot Rolling</li><li>Effect of Nd Content and Heat Treatment on Microstructure and Mechanical Properties of Mg-Zn-Nd Alloy</li><li>Effects of Al-Ti-B-Sr Master Alloy on the Microstructure and Mechanical Properties of A356 Alloy</li><li>Effect of Hot Deformation Parameters on Flow Behavior and Microstructure of Ti-6Al-4V-0.2O Alloy</li><li>Microstructure Evolution of Mg-4.5Zn-0.75Er Alloy Containing I-Phase during Hot Compression</li><li>Microstructure Evolution and Properties of 7A56 Aluminum Alloy by Homogenization</li><li>Numerical Simulation of the Forming Limit of Superplastic AZ31B Magnesium Alloy Sheet</li><li>Microstructure and Properties of Rolled Magnesium Alloy Thick Plate at Different Positions</li><li>A High Strength and Toughness Mg-Y-Ni Alloy with a Long-Period Stacking Ordered Structure</li><li>Improvement of Mechanical Properties and Corrosion Resistance by Deformation Induced Precipitation in Al-Zn-Mg-Cu Alloy</li><li>Effects of Extrusion Ratio on Microstructures and Properties of Al-Cu-Mg-Ag-Ce-Er Alloy Wires</li><li>Dynamic Compression Properties of Ti-6Al-4V Titanium Alloy Extruded Sections</li><li>Improvement of ADC12 Alloy by Optimizing CSP Process Parameters via Multiple Nonlinear Regression Analysis</li><li>Precipitation Kinetics Analysis of the Cooling Process Following the Solid Solution Treatment of 7B50 Aluminum Alloy</li><li>Effect of Melt Overheating Treatment on the Melt Structure and Solidified Structures of Al<sub>75</sub>Bi<sub>9</sub>Sn<sub>16</sub> Immiscible Alloy</li><li>Analysis of Twinning Behavior of Ti-2V Alloy Compressed at High Strain Rate</li><li>Improvement of Mechanical Properties and <i>In Vitro</i> Degradation Resistance of Biodegradable Mg-1.5Zn-0.6Zr-0.2Sc Alloy by Extrusion</li><li>Effect of Cooling Rates on the Solidification and Microstructure of Rapidly Solidified Mg<sub>70.8</sub>Zn<sub>28</sub>Nd<sub>1.2</sub> Quasicrystal Alloy</li><li>Effects of A-EMS on Microstructure and Mechanical Properties of DC Casting Al-10Si-1.1Ni Alloy</li><li>Influence of Yb Modification on the Microstructure and Mechanical Properties of A356.2 Aluminum Alloy</li><li>Microstructure of As-Cast 7085 Aluminum Alloy by Homogenization</li><li>Microstructure Evolution and Mechanical Properties of AZ61 Mg Alloy Processed by Two-Pass Friction Stir Processing</li><li>Microstructure and Mechanical Properties of ZK60 Magnesium Alloy Prepared by Multi-Pass Friction Stir Processing</li><li>Effect of TiB on the Nucleation and Growth of ? Phase in Ti-6Al-4V-0.1B Alloy</li><li>Constitutive Equation and Dynamic Softening Behavior of 7A55 Aluminum Alloy during Compression at Elevated Temperatures</li><li>Microstructure Evolution and Mechanical Properties of Extruded Mg-Al-Zn-Sn Alloy Sheets</li><li>Microstructure and Creep Behaviors of As-Cast Mg-Zn-Er Alloys</li><li>Dynamic Recrystallization of Mg-8Gd-3Y-1Nd-0.5Zr Alloy during Hot Deformation</li><li>Properties of Argon Gas Atomized Ti-43Al-9V-Y Alloy Powders</li><li>Fabrication and Properties of Gas Atomized Gamma Titanium Aluminide Powders and PM Processing</li><li>Microstructure and Properties of Al-Cu-Mn Alloy with Y, Zr and (Y+Zr)</li><li>Microstructure and Mechanical Properties of TC4 Titanium Alloy Subjected to High Static Magnetic Field</li><li>Influence of Precipitation Hardening on the Sliding Wear Behavior of a Cu-Zn-Al-Mn-Si Based Brass Alloy</li><li>Effects of La Microalloying on Microstructure Evolution of Pure Copper</li><li>Effects of La and Ce Mixed Rare Earth on Microstructure and Properties of Al-Mg-Si Aluminum Alloy</li><li>Evolution of LPSO Structure of Mg-11Gd-4Y-2Zn-0.5Zr Alloy during Hot Compression Deformation at Different Temperatures</li><li>Effect of Heat Treatment on Microstructure Evolution and Mechanical Behavior of SKLB3 Alloy</li><li>Constitutive Equations for 6061 Aluminum Alloy at Elevated Temperature</li><li>Dielectric Characteristics of (Ca<sub>0.2</sub>Sr<sub>0.8</sub>)<sub>3</sub>(Zr<sub>x</sub>Ti<sub>1-x</sub>)<sub>2</sub>O<sub>7</sub> Ceramics at Microwave Frequencies</li><li>Chapter 1.2: High-Temperature Alloys</li><li>Effect of Hot Isostatic Pressing on Microstructures and Mechanical Properties of IN738LC Superalloy</li><li>Effect of a High Magnetic Field on the Microstructure of Directionally Solidified NiAl-Cr(Mo)-Si Near-Eutectic Alloy at Different Withdrawal Rates</li><li>Microstructures of Low Angle Boundaries of a Third Generation Single Crystal Superalloy DD9</li><li>High Temperature Rupture Life of Nickel-Based Superalloy under Directional Solidification with High Temperature Gradient</li><li>Effect of Alloying Elements on Volume Fraction of ?' Phase in Power Metallurgy Nickel-Base Superalloy</li><li>First-Principles Investigation of Phase Stability, Elastic and Thermodynamic Properties in L1<sub>2</sub> Co<sub>3</sub>(Al,Mo,Ta) Phase</li><li>Effect of Solution Treatment Temperature on the Grain Growth Behavior of Fine Grained FGH96 Superalloy</li><li>Effect of Trace Ce and B Additions on the Mechanical Properties of Nb-3Si-22Ti Alloys</li><li>Effect of Cold Working and Aging Treatment on the Mechanical Properties of Co-Ni Alloy</li><li>Oxidation Behavior of a Disk Powder Metallurgy Superalloy</li><li>Effects of HIP Process on the Microstructure and Mechanical Properties of a Cast Superalloy</li><li>Influence of Heat Treatment Temperature on the Microstructures and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy</li><li>Investment Casting Defects of a Turbine Nozzle Made by K465 Alloy</li><li>Influences of W and Al on the Microstructure and Stress-Rupture Property of Re-Free Ni-Based Single Crystal Superalloys</li><li>Effect of Low-Angle Boundary on Microstructure and Stress Rupture Property of a Third Generation Single Crystal Superalloy DD10</li><li>Characteristics of Microscopic Inclusions and their Influence on Fatigue Crack Propagation in FGH96 Superalloy</li><li>Microstructure Evolution and Stress Rupture Properties of DD6 Single Crystal Superalloy after Overheating</li><li>Stabilities of Microstructure and Mechanical Properties during Long-Term Aging on FGH95 Superalloy</li><li>Hot Deformation Behavior of AA-FGH720Li Superalloy</li><li>The Precipitation Behavior of ?' Phase in Single Crystal Ni-Based DD6 Superalloy for Turbine Blade</li><li>Microstructure and Property Calculation of Three Typical Second Generation Single Crystal Superalloys</li><li>Effect of Heating Temperature on Microstructure of Directionally Solidified Ni-43Ti-7Al Alloy</li><li>Effect of Annealing on Microstructure and Tensile Properties of Ti-6.5Al-2Sn-4Zr-2Mo-2Nb-1W-0.2Si Alloy</li><li>Hot Deformation Behavior and Processing Map of a New High-Temperature Titanium Alloy</li><li>Microstructure and Mechanical Properties of Ti62421S High Temperature Titanium Alloy with Different Heat Treatments</li><li>Effect of Near-Isothermal Forging Temperature on the Microstructure and Mechanical Properties of Near ? High Temperature Titanium Alloy</li><li>Effect of Rare Earth Er on the Microstructure and Mechanical Properties of High Temperature Titanium Alloys</li><li>Effect of Forging Processes on the Microstructure and Mechanical Properties of High Temperature Titanium Alloy Containing Erbium</li><li>Temperature Memory Effect of Ti-Ni-Hf-Y High Temperature Shape Memory Alloy</li><li>Effect of Y<sub>2</sub>O<sub>3</sub> Coating on the Interface and Mechanical Properties of SiC Fiber Reinforced GH4738 Composites</li><li>Chapter 1.3: High-Entropy Alloys</li><li>Periodic Maximum Entropy Random Structure Models for High-Entropy Alloys</li><li>Microstructure and Properties of the Co<sub>2</sub>NiWV<sub>0.5</sub>Mo<sub>1.5</sub>, Co<sub>2</sub>NiWV<sub>0.5</sub>Mo<sub>2</sub>, and Co<sub>2</sub>NiWV<sub>1.0</sub>Mo<sub>2</sub> Multi-Principal Elements Alloys</li><li>AlCrFeNi High-Entropy Coating Fabricated by Mechanical Alloying and Hot Pressing Sintering</li><li>Microstructure and Mechanical Properties of VTaTiMoAl<sub>x</sub> Refractory High Entropy Alloys</li><li>
<i>In Situ</i> Laser Synthesis of High Entropy Alloy Coating on Ti-6Al-4V Alloy: Characterization of Microstructure and Properties</li><li>Chapter 1.4: Metallic Glasses and Amorphous Materials</li><li>Evolution and Performance of Porous Structure on the Surface of Fe<sub>76</sub>Si<sub>7.2</sub>B<sub>9.6</sub>P<sub>7.2</sub> Amorphous Ribbon</li><li>Non-Isothermal Crystallization Kinetics of Mg<sub>61</sub>Zn<sub>35</sub>Ca<sub>4</sub> Glassy Alloy</li><li>Microstructure and Corrosion Behavior of Ti-Ni Based Bulk Metallic Glass Composites</li><li>Effect of B2 Phase Transformation on the Mechanical Behavior of CuZr-Based Bulk Metallic Glass Composites</li><li>Diffusion of Ce-Al Melts Measured by Sliding Cell Technique</li><li>Properties of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub>/Fe<sub>76</sub>Si<sub>9</sub>B<sub>10</sub>P<sub>5</sub> Bulk Soft Magnetic Composites by Annealing Treatment</li><li>Effect of Laser Shock Peening on the Surface Morphology of Metallic Glasses</li><li>Electrical Resistance Relaxation in La<sub>55</sub>Al<sub>25</sub>Ni<sub>10</sub>Cu<sub>10</sub> Bulk Metallic Glass</li><li>Co-Based Bulk Metallic Glasses with Good Soft-Magnetic Properties and High Strength</li><li>Chapter 1.5: Conventional and Special Steels</li><li>Influence of Service Time on the Microstructure and High Temperature Mechanical Properties of T23 Boiler Tube</li><li>Critical Crack Tip Opening Displacement for X70 and X80 Steels - A Parametric Study</li><li>Fatigue Crack Growth Rate of High Strength Pipe Steels</li><li>The Microstructure Stability of Super304H Steel Aging at 750 degreesC</li><li>Numerical Study of the Crack-Front Constraint for SENT Specimens of X80 Pipeline Steel</li><li>Effect of Steel Properties on Buckling Pressure of Corroded Pipelines</li><li>The Effect of Twice Thermal Cycle on the Microstructure and Mechanical Properties of Coarse Grain Region in X80 Pipeline Steel</li><li>Estimation of Fracture Toughness <i>J</i><sub>IC</sub> by Miniature Specimen Hydraulic Bulge Test</li><li>Crack Arrest Toughness of High Grade Gas Pipeline</li><li>Effect of Aging Temperature on Microstructure and Properties of V Alloyed High Manganese Austenitic Steel</li><li>Low Temperature Mechanical Properties of Power Transmission Tower Steel</li><li>Hot Ductility of 20Cr13 Steel at High Temperature</li><li>Effect of Precipitates on Austenite Grain Growth Behavior in a Low-Carbon Nb-V Microalloyed Steel</li><li>Research on Mechanical Properties and Wear Behavior at Extremely Low Temperature of a 16Cr-6Ni Austenitic Steel</li><li>Hot Deformation and Dynamic Recrystallization Behavior of Fe-8Mn-6Al-0.2C Steel</li><li>Effect of Pre-Existing Martensite on Bainitic Transformation in Low-Temperature Bainite Steel</li><li>Deformation Behaviors and Constitutive Model of DP1000 under Different Strain Rates</li><li>Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications</li><li>Corrosion Resistance of a Gradient Surface with Cr Alloying on Low-Carbon Steel</li><li>Modeling the Precipitation Kinetics of Cementite in Bainite in 0.17% Carbon Steel</li><li>Tribocorrosion Behaviors of D40 Steel in Artificial Seawater</li><li>Effects of Interstitial Nitrogen Atoms on Atomic Oxygen Adsorption on Fe (001) Surface from <i>Ab Initio</i> Calculations</li><li>Chapter 1.6: Metallic Composites and Compounds</li><li>Numerical Simulation on Filling Process of SiCp/A357 Composites</li><li>Comparison of Residual Stress Measured by Diffraction Method and Matrix Etching Method in SiC Fiber Reinforced Titanium Matrix Composites</li><li>Preparation of AlB<sub>12</sub>-Type Al-B Alloys</li><li>Reciprocating Wear Resistance of PTAW Deposited WC/Ni-Based Composite Overlays</li><li>Analyzing Hysteresis and Thermal Expansion Coefficient of M40/AZ91D during Thermal Cycling</li><li>Process and Properties of Ultrafine Silver-Coated Electrolytic Copper Powders</li><li>Effect of Boron on Microstructure and Properties of Sn-1.0Ag-0.5Cu Low-Silver Lead-Free Solder</li><li>Progress on Preparation, Microstructure and Property of Graphene Reinforced Aluminum Matrix Composite</li><li>Microstructure and Damping Capacity of AlN<sub>p</sub>/Mg-Al Composites with Different Particle Contents</li><li>Preparation and Electrical Conductivity of PANI Coated Nickel Fiber</li><li>Diffusion Bonding in Fabrication TA2 Sheets Enhanced Aluminum Foam Sandwich</li><li>Effect of Spark Plasma Sintering Temperature on the Consolidation of SiC Fiber Reinforced Titanium Alloy Matrix Composites</li><li>Morphology of Intermetallic Compound and Interface Bonding State in Pure Al/Steel Clad Plates after 645 degreesC/1h Diffusion Annealing</li><li>Research Progress on Plastic Processing Techniques of Particulate Reinforced Aluminium Matrix Composites</li><li>Processing and Electrical Properties of Nano-Al<sub>2</sub>O<sub>3</sub>/Cu Composites</li><li>Effect of Si Content of Matrix Alloy on the Microstructure and Properties of Sip/Al-Si-Mg Composites Prepared by Pressure Infiltration Method</li><li>Effect of Mechanical Stirring and Air Pressure on the Fluidity of SiCp/A357 Composites</li><li>Fabrication and Properties of <i>In Situ</i> B<sub>13</sub>P<sub>2</sub> Reinforced Cu-Based Composites</li><li>Effect of Annealing Treatment on the Mechanical Properties of Cu-Ni-Si/Al-Mg-Si Clad Composite Wires</li><li>
<i>In Situ</i> Observation of Diffusion Behavior and Microstructural Evolution on Interfaces in Al/Cu Bimetal</li><li>Elastic Properties, Phonon Focusing and Electronic Structures of Typical Long-Period Superstructures Al<sub>5</sub>Ti<sub>2</sub> and Al<sub>11</sub>Ti<sub>5</sub></li><li>Thermodynamic Calculation of Phase Equilibria in the Mn-RE (RE=Nd, Gd, Dy) Binary Systems</li><li>Thermodynamic Calculation of the Rare Earth Permanent Magnets: Fe-RE (RE=Ho, Er, Tm, Sm) Binary Systems</li><li>Chapter 2.1: Processing Technologies of Structural Materials</li><li>Microstructure Characterization of AZ31B Mg Alloy Welds Processed by Nd:YAG Laser Welding</li><li>Effects of Ultrasonic Impact Treatment on the Residual Stress and Microstructure of TA15 Welded Joint</li><li>Application of State of the Art Assessment for Pipeline Girth Weld</li><li>Metal Magnetic Memory Testing of Welded Joints under Fatigue Load</li><li>Microstructure and Mechanical Properties of X80 Girth Welds with Different Welding Processes</li><li>Mechanical Properties of Micro-Zones of X80 Pipeline Welding Joints</li><li>Fracture and Crack Propagation Behavior of 560 MPa Microalloyed Pipeline Steel under Different Cooling Schedules</li><li>Failure Analysis of Dissimilar Steel Weld Cracking on High and Medium Pressure Guide Pipe</li><li>Microstructure Characterization of Inertial Friction Welding Zone for Nickel-Based Superalloy FGH96</li><li>Welding Performance of Several New Rare Earth Tungsten Electrodes</li><li>Abnormal Grain Growth on the Surface of Cold-Rolled AA1235 Aluminum Plate during the Annealing Process</li><li>The Optimal Selection of Extrusion Parameters of As-Cast TC27 Titanium Alloy Based on Processing-Map</li><li>Microstructure Evolution of Hot-Extruded Cu-15Ni-8Sn Alloy with Different Extrusion Ratios</li><li>A Predictive Model of Hot Rolling Flow Stress by Multivariate Adaptive Regression Spline</li><li>Effect of Solution Treatment on Microstructure and Mechanical Properties of Hot-Extruded Cu-15Ni-8Sn Alloy</li><li>Numerical Simulation on Filling Optimization of Copper Rotor for High Efficient Electric Motors in Die Casting Process</li><li>Filling of Microarray Fabricated by Micro Powder Injection Molding</li><li>Finite Element Simulation of Chain-Die Forming U Profiles with Variable Cross-Section</li><li>Defect Formation Mechanism and Influence of Processing Parameters on Surface Quality of Copper Clad Steel Composite Wires Prepared by Core-Cladding Continuous Casting</li><li>Preparation of Micro-Hole with Large Aspect Ratio</li><li>Effects of Austenitizing Temperature and Cooling Rate on the Mechanical Properties of 36MnVS4 Steel for Automobile Engine Connecting Rod</li><li>Influence of Cooling Rate and Chemical Composition on Phase Transformation and Hardness of C70S6 Steel</li><li>Common Defect Analysis for Large Section Special Steel Forging</li><li>Manufactured Process of High Strength and High Electrical Conductivity Cu-Cr-Zr-Mg Alloy Bars</li><li>Preparation and Fundamental Research of Continuous Through-Porous Pure Aluminum Flat Pipes by Depoling Continuous Casting</li><li>Grain Refinement Mechanism and Effective Nucleation Phase of Al-5Ti-1B Master Alloy</li><li>Effect of High Density Electropulsing Current on Microstructure and Mechanical Properties of Fe-6.5wt.%Si Alloy Sheet</li><li>Microstructure and Magnetic Properties of (Nd<sub>1-2x</sub>Pr<sub>x</sub>Y<sub>x</sub>)<sub>2.28</sub>Fe<sub>13.58</sub>B<sub>1.14</sub> Melt-Spun Alloys</li><li>Effect of Bonding Temperature on Microstructure Development during Transient Liquid Phase Bonding of Ti<sub>2</sub>AlNb Alloy Using Ti-Zr-Cu Based Filler Alloy</li><li>Floating Behavior of Entrapped Gas in Semi-Solid Metal</li><li>Effect of Residual Stress and Microstructures on 316 Stainless Steel Treated by LSP</li><li>Pore Structure Analysis of Large Size Gasar Cu Ingot Prepared by Bridgman Method</li><li>Crack Formation Mechanism of High Silicon Steel during Twin-Roll Strip Casting</li><li>Microstructure and Properties of 1060Al/AZ31/1060Al Composite Plates Fabricated by Explosive Welding</li><li>Numerical Simulation of Temperature Field and Microstructure of a Wide Copper Plate during Warm Mold Continuous Casting</li><li>An Effective Method to Fabricate 5083 Aluminum Alloy with Excellent Corrosion Resistance</li><li>Simulation Analysis of Aluminum Circular Tube in a Two-Stage Porthole Dies Extrusion Process</li><li>Influence of Post Heat Treatment on Microstructure and Mechanical Property of Ti6Al4V Parts Produced by Selective Laser Melting</li><li>Comparison of Microstructure and Mechanical Properties of Aluminum Components Manufactured by CMT</li><li>Numerical Simulation of Hot Die Forging Process of Ti-6Al-4V Alloy Blade</li><li>Strengthening Effects of Single Particle with Different Mechanical Property on Ultra-Thin Rolling of AA1235 Aluminum Alloys</li><li>Effects of Uniaxial Strain on the Structures of Vacancy Clusters in FCC Metals</li><li>A Description of Preferential Sites for Vacancy Formation on Grain Boundaries in Copper by Structural Unit Model</li><li>Chapter 2.2: Technologies and Materials for Coatings</li><li>TiN-Al Composite Coatings on A356 Alloy by Mechanical Alloying</li><li>Ceria Coatings Prepared by Sol-Gel Approach on AZ91 Magnesium Alloy</li><li>Grain Size and Adhesion Strength of the V<sub>8</sub>C<sub>7</sub> Coatings Produced <i>In Situ</i></li><li>Substrate Bias Dependent Microstructure and Properties of TC17 Titanium Alloy Coatings Deposited by Magnetron Sputtering</li><li>Electrodepositing Process of Ni-W-P/Graphene Composite Coatings</li><li>Wear and Corrosion Behaviours of FeCrNiSi Alloy Coatings by Laser Cladding</li><li>Influence of Impurities on the Microstructure and Thermal Shock Resistance of YSZ Coatings</li><li>Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings</li><li>NbN Thin Film of Alternating Textures</li><li>Optimization of MAO Process Parameters and Effect of Subsequent Sealing Treatment on Corrosion Resistance of Aluminum Alloy</li><li>Deposition and Characterization of C-NbN/NbCN Multilayers on Si(100) Substrates</li><li>Fracture Toughness of Tungsten Carbide Reinforced Fe-Matrix Surface Composites</li><li>Microstructure and Properties of TiC Steel-Bonded Carbide Used Fe/Mo Pre-Alloyed Powder as Binder</li><li>Effect of WC and Co on the Microstructure and Properties of TiC Steel-Bonded Carbide</li><li>Selective Electrolytic Corrosion Behaviours of WC in WC-Co Cemented Carbide</li><li>New Equipment for Production of Super Hard Spherical Tungsten Carbide and other High-Melting Compounds Using the Method of Plasma Atomization of Rotating Billet</li><li>Preparation and Microstructure, Mechanical, Tribological Properties of Niobium Carbide Films</li><li>Deposition and Characterization of Reactive Magnetron Sputtered Tungsten Carbide Films</li><li>Effect of Micron-Scale SiO<sub>2</sub> Surface Coating on the Strength of Chemically Strengthened Glass</li><li>Structure Stability and Mechanical Property of Y<sub>2</sub>O<sub>3</sub> Thin Films Deposited by Reactive Magnetron Sputtering</li><li>Thermomechanical and Thermal Gradient Mechanical Fatigue Lifetime of Thermal Barrier Coating Systems</li><li>Preparation and Properties of Heat-Dissipation Coating Filled with Carbon-Based Filler</li><li>Preparation and Characterization of a Novel Hydrogel-Based Fouling Release Coating</li><li>Preparation and Properties of Silicone Based Self-Deicing Coating</li><li>Preparation and Properties of a Self-Deicing Coating Based on Layered Double Hydroxide</li><li>Synthesis and Characterization of Magnetic Al/NiO Composite Pigments with Low Infrared Emissivity</li><li>Thermodynamic Analysis of Ni-Al-WC System during Self-Propagating High Temperature Synthesis</li><li>Preparation of Continuous Al<sub>2</sub>O<sub>3</sub>/Y<sub>2</sub>O<sub>3</sub> Coating on Carbon Fiber by a Novel Aqueous Plasma Electrolysis</li><li>The Effect of Mill Addition of Quartz Glass on Thermal Shock Resistance of Sheet Steel Enamels</li><li>Chapter 3.1: Ceramics, Ferromagnetic Alloys and Materials</li><li>Effects of La Doping on Microstructure and Ferroelectric Properties of BLTN Lead-Free Ceramics</li><li>Synthesis and Characterization of Si<sub>3</sub>N<sub>4 </sub>Nanopowder by RF Induction Thermal Plasma</li><li>Preparation of (K,Na)NbO<sub>3</sub> Powders with Wide Grain Size Distribution</li><li>Effect of Molten NaCl on the Synthesis of Ti<sub>3</sub>SiC<sub>2</sub> Powders</li><li>Negative Thermal Sensitivity of La<sub>1-x</sub>Sr<sub>x</sub>FeO<sub>3</sub> Films Prepared by Screen-Printing Method</li><li>Synthesis and High-Frequency Absorption Property of Flower-Like Nickel-Ferrite Composites</li><li>Dependence of Peak Frequency of Microwave Absorption for Co<sub>2</sub>Z Composite on the Thickness</li><li>Effect of Magnetic Orientation on the Microwave Absorption Properties for Planar-Anisotropy Ce<sub>2</sub>Fe<sub>17</sub>N<sub>3-? </sub>Powders/Silicone Composite</li><li>High Permeability of Z-Type Ferrite Sheets Directional Array</li><li>Synthesis of Uniform Barium Ferrite Powders by Co-Precipitation Method</li><li>Dielectric and Magnetic Properties of Cermets with Iron-Aluminum Dual Metallic Particles</li><li>Synthesis and Thermoelectric Properties of ZnO/Cu<sub>2</sub>SnSe<sub>3</sub> Composites</li><li>Microstructure and Distribution of Low Content Elements in AlNiCo 9</li><li>Preparation of Anisotropic Nd-Lean Nd-Fe-B Magnets with Improved Coercivity</li><li>Dielectric and Conduction Properties of Lu<sub>3</sub>NbO<sub>7</sub> Transparent Ceramic</li><li>Effects of Annealing on Ferroelectric, Optical and Electrically Controlled Light Scattering Properties of PLZT Transparent Ceramics</li><li>Fabrication of High Purity MgO Ceramic Targets by Hot-Isostatic Pressing</li><li>Dielectric Performance of (Pb<sub>1-x</sub>Sr<sub>x</sub>)Nb<sub>2</sub>O<sub>6</sub>-NaNbO<sub>3</sub> Thin Film Materials System: Substitution Effects</li><li>Microstructure of Silicon Nitride Fibers at Elevated Temperatures</li><li>Combustion Synthesis: A Rapid Way for Preparing Bulk Cu<sub>2</sub>SnSe<sub>3</sub> Thermoelectric Materials</li><li>Combustion Synthesis of ?-SiAlON Using 3D Ball Milling</li><li>Effect of Bimodal Granularity Distribution on the Properties of Silica-Based Ceramic Cores</li><li>Permeability Test Method of the Material for Graphite Pressure Vessel</li><li>Chapter 3.2: Semiconductors and Materials for Micro- and Optoelectronics</li><li>Surface Modification of Graphene Oxide with Pyrene Derivatives and their Photo-Switching Behaviors</li><li>Transmission Loss of Membrane-Type Acoustic Metamaterial with Negative Effective Mass</li><li>Complex Permittivity and Permeability Spectra of Nickel/Polyphenylene Sulfide Composite in Radio Frequency Range</li><li>Multi-Walled Carbon Nanotube-Alumina Nanocomposites with Dielectric Resonance-Induced Negative Permittivity Behavior</li><li>High Frequency Electrical and Magnetic Properties of Al/Epoxy Composites Prepared by Insulation Coating Process</li><li>Viscosity and Structure of KDP Aqueous Solution</li><li>Viscosity of Potassium Dihydrogen Phosphate Aqueous Solution within Magnetic Field</li><li>Effects of Deposition Rate on the Structural, Morphological and Optical Properties of Brookite TiO<sub>2</sub> Films Prepared by MOCVD</li><li>Structural, Electrical and Optical Properties of Ternary Al<sub>2</sub><i><sub>x</sub></i>In<sub>2(1-</sub><sub>x</sub><sub>)</sub>O<sub>3</sub> Films Prepared by Metal Organic Chemical Vapor Deposition</li><li>Effect of Doping Concentrations on Properties of Nb Doped ZnO (NZO) Ceramics Targets</li><li>Power-Efficient Phase Change Memory Using Silicon Carbide as a Buffer Layer</li><li>Growth of Single-Crystalline Tris-(8-Hydroxyquinoline) Gallium Uniform Sub-Microrods and their Optical Properties</li><li>Preparation and the Photoluminescence Properties of Er<sup>3+</sup>-Doped MoS<sub>2</sub> Thin Films</li><li>Stability of Sb<sub>2</sub>Te Crystalline Films for Phase Change Memory</li><li>Carbon-Doped Sb-Rich Ge-Sb-Te Phase Change Material for High Speed and High Thermal Stability Phase Change Memory Applications</li><li>Enhanced Fluorescence Emission of Bonding Type Rare Earth Complexes Eu(MAA)<sub>3</sub>Phen</li><li>Structure and Electrochemical Performance of Melamine/Graphene Aerogel Composite for Supercapacitors</li><li>Synthesis and Fluorescence Properties of a Terbium Complex with Ferrocenylazobenzoic Acid in Nanoparticles</li><li>Surface Plasmon Resonance Effect of the MoS<sub>2</sub>/Ag System</li><li>Amorphous NiCoPt/Ce<sub>2</sub>O<sub>3</sub> Nanoparticles as Highly Efficient Catalyst for Hydrogen Generation from Hydrous Hydrazine</li><li>A New Green Approach for Recovery of Metallic Tungsten through Electrolysis of Tungsten Carbide Scrap Anode in Molten Salts</li><li>Removal of NOx by Cement Raw Meal and Biochar Admixture</li><li>Preparation and Adsorption Properties of Fe/Chitosan/Fly Ash Composite</li><li>A Novel Way to Modify PTFE Membrane into Hydrophilicity</li><li>Modification of Nano Spherical-Like MnO<sub>x</sub>/TiO<sub>2</sub> Catalysts with F-Doped</li><li>Experimental Study on Preparation and Operating Conditions over a Promising Monolithic Catalysts for NO<sub>x</sub> Removal: MnO<sub>x</sub>/TiO<sub>2</sub>/Cordierite</li><li>Catalytic Activity of Fe-SBA-15 Prepared by Evaporation-Induced Self-Assembly (EISA) Method</li><li>Freeze-Drying Graphene Aerogels and their Adsorption Ability towards Organic Reagents</li><li>Effect of Sintering Temperature on the Structure and Properties of Attapulgite-Based Nanofibrous Membranes</li><li>Fabrication and Stability of CoAl<sub>2</sub>O<sub>4</sub> Ceramic Pigment for 3D Printing</li><li>Investigation on NaCl Structure and Properties in External Electric Field</li><li>Sensing Mechanism of SnO<sub>2</sub> (110) Surface to NO<sub>2</sub>: Density Functional Theory Calculations</li><li>Chapter 3.3: Building Materials and Construction Technologies</li><li>CO<sub>2</sub> Emission Analysis of Light Aggregate Concrete Block in China</li><li>Energy Consumption Analysis of Building with Typical External Thermal Insulation System</li><li>Effect and Mechanism of Sodium Fluosilicate on Setting Time of Cement</li><li>Influence of Triethanolamine on Strength Development and Hydration of Cementitious Systems Blended with Titanium Slag</li><li>Effect of Anhydrite on the Early Hydration Performance of Rapid Setting and Hardening Belite Sulfoaluminate Cement</li><li>Hardening Performance and Mechanism of Fluosilicate Surface Treatment Agent on Cement-Based Materials</li><li>Putting Cement to Sleep with Sucrose and Waking it up with Ca(OH)<sub>2</sub></li><li>Influence of Triethanolamine on the Properties of Cement-Based Materials</li><li>Effects of Aging on the Low Temperature Properties of Asphalt Binder and its Mixture</li><li>Environment Impact Analysis of Four Different Cement Production Strategies</li><li>Ecological Design of New Type Aluminum-Plastic Composite Panel Based on LCA</li><li>Influence of Quality and Replacement Rate of Recycled Coarse Aggregate on the Frost Resistance of Recycled Concrete</li><li>Influence of Preparation Process on the Performance of Strain Hardening Cementitious Composite</li><li>Effect of Testing Factors on Rietveld Quantitative Analysis of Cement-Matrix Materials</li><li>Water Erosion Resistance Performance of the Pervious Recycled Concrete</li><li>Electromagnetic Shielding Effectiveness of Nickel Fiber-Reinforced Cement Composites</li><li>Properties of the Concrete for the Slab Ballastless Track of CRTS III</li><li>Application of Polycarboxylate Superplasticizer in the Concrete</li><li>Bending Analysis of Functionally Graded Beam Resting on Elastic Foundation by Meshless SPH Method</li><li>Chapter 3.4: Composites and Polymers</li><li>Microstructure and Properties of C-S-H/PCE Nanocomposites</li><li>Preparation and Characterization of Silk Fibroin Based Antibacterial Biotextiles as Wound Dressing</li><li>Dielectric Behavior of Barium Titanate/Carbon Fibers Composites</li><li>Effect of Heat-Treatment on the Properties of PBO Fibers</li><li>Organic Functionalization and Properties of ZnO Nanosheets with Polymer Containing N-Vinyl Carbazole</li><li>Effects of Co, Zr Additions on the Magnetic Properties of Nanocomposite Nd<sub>2</sub>Fe<sub>14</sub>B/?-Fe Magnets</li><li>Impregnation Behavior of Polyamide 6 in Carbon Fibers and the Properties of their Composites</li><li>Dielectric Properties of Epoxy/Anhydride System in Long-Term Storage</li><li>Effects of Poly(Ethylene Glycol) Segment on Physical and Chemical Properties of Poly(Ether Ester) Elastomers</li><li>Structure and Compressive Property of Heterocyclic Aramid Fiber</li><li>Preparation PET Hybrided Materials by <i>In Situ</i> Polymerization for Delustered Fibers</li><li>Copolymerization Modification of PPTA with 2,5-Furandicarboxylic Acid: Towards High-Performance Material with Enhanced Solubility</li><li>Solution Blow Spun High Performance Co-Polyimide Nanofibers</li><li>Rheological Behaviors of Graphene Oxide/Polyacrylonitrile Spinning Solutions</li><li>Continuous Production of Hollow Hydrogel Fibers with Graphene Inner Wall</li><li>Electroplating of Copper on the Continuous Carbon Fibers</li><li>Effect of Draw Ratio on the Microstructure of Silk Fibroin/Graphene Oxide Hybrid Fibers</li><li>Gamma Irradiation Assisted Synthesis of Ag/rGO Composites and their Surface Properties</li><li>Effect of Surface Treatment on the Mechanical Performance of PPTA-Pulp Reinforced Rubber Composites in Supercritical Carbon Dioxide Fluid</li><li>Crystallization Behavior of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) with WS<sub>2</sub> as Nucleating Agent</li><li>Processability and Thermal Property of Poly(Phenylene Sulfide)/Graphene Nanoplatelets Nanocomposites and their Fibers</li><li>Preparation and Characterization of Antibacterial Nylon 6 Fiber</li><li>Photo-Induced Charge Generation of TiO<sub>2</sub> Nanotube Modified with Polymer Containing C<sub>60</sub> under Irradiation of Visible Light and its Applications</li><li>Preparation of Nano Cu-ZnO/PET Fiber for Antibacterial Application</li><li>Fully Biodegradable Films Based on Functionalized Natural Polyphenol/Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) as a Potential Material for Food Packaging</li><li>Nanocomposites of Carbon Nanotube/Polyaniline with Pending Calix[8]Arene and their External Stimuli Response Properties</li><li>High Temperature Resistance of Polyborosilazane/Epoxy Resin Curing System</li><li>Curing Process and Heat-Resistance of Polyethersulfone Toughened Epoxy Resins</li><li>Effect of Different Factors on the Fibrillation Degree of Lyocell Fiber Based on Homogenization Treatment</li><li>Cellulose/Paraffin Composite Fibers for Thermal Energy Storage and Temperature Regulation</li><li>Preparation and Environmental Resistance of Dual-Wavelength Polypropylene Fluorescent Anti-Counterfeiting Fibers</li><li>Preparation and Properties of Copolyesters Fiber with Flame Retardant and Anti-Droplet by <i>In Situ</i> Polymerization</li><li>Functionalization of ?-ZrP by 1,2-Epoxypropane for Further Modification</li><li>Polyaniline Nanofibers Prepared with Binary Oxidant at the Presence of Para-Phenylenediamine</li><li>Preparation and Characterization of Stimuli-Responsive Poly(N-Isopropylacrylamide)/Ca-Alginate Hydrogel Fiber by Microfluidic Spinning</li><li>Doxorubicin Loading Capacity of Shell Cross-Linked Micelles with pH-Responsive Core as Anticancer Drug Delivery Nanocarriers</li><li>Synthesis of Biotinylated pH-Sensitive Glycopolymer with Different Architectures</li><li>Electromagnetic Shielding Effect of Aluminum Foam in 10~500 kV Electrical Substations</li><li>Effects of Multi-Walled Carbon Nanotubes on the Properties of Acrylonitrile Butadiene Styrene Nanocomposites Potentially Used for Fused Deposition Modeling</li><li>Effects of External Heat Radiation on Combustion and Toxic Gas Release of Flame Retardant Cables</li><li>Thermal Aging Effects on Fire Performance of the Cross-Linked Polyethylene Insulated Cable</li><li>Online Measuring Method of Interlaminar Cracks of Laminated Composite Based on Image Processing Technology</li><li>Chapter 3.5: Materials and Technologies in Chemical Engineering</li><li>Allocation of the Environmental Impact in Iron and Steel Industry</li><li>Life Cycle Assessment of Cathode Copper Production</li><li>Comparative Life Cycle Assessment of Chinese Radial Passenger Vehicle Tire</li><li>Materials Flow Analysis of Metallic Titanium in China</li><li>Substance Flow Analysis of Rare Earth Lanthanum in China</li><li>Thermal Decomposition Characteristics and Drying Process of Municipal Sludge</li><li>Extraction of the RO Phase from Steel Slag</li></ul>
<i>In Situ</i> Laser Synthesis of High Entropy Alloy Coating on Ti-6Al-4V Alloy: Characterization of Microstructure and Properties</li><li>Chapter 1.4: Metallic Glasses and Amorphous Materials</li><li>Evolution and Performance of Porous Structure on the Surface of Fe<sub>76</sub>Si<sub>7.2</sub>B<sub>9.6</sub>P<sub>7.2</sub> Amorphous Ribbon</li><li>Non-Isothermal Crystallization Kinetics of Mg<sub>61</sub>Zn<sub>35</sub>Ca<sub>4</sub> Glassy Alloy</li><li>Microstructure and Corrosion Behavior of Ti-Ni Based Bulk Metallic Glass Composites</li><li>Effect of B2 Phase Transformation on the Mechanical Behavior of CuZr-Based Bulk Metallic Glass Composites</li><li>Diffusion of Ce-Al Melts Measured by Sliding Cell Technique</li><li>Properties of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub>/Fe<sub>76</sub>Si<sub>9</sub>B<sub>10</sub>P<sub>5</sub> Bulk Soft Magnetic Composites by Annealing Treatment</li><li>Effect of Laser Shock Peening on the Surface Morphology of Metallic Glasses</li><li>Electrical Resistance Relaxation in La<sub>55</sub>Al<sub>25</sub>Ni<sub>10</sub>Cu<sub>10</sub> Bulk Metallic Glass</li><li>Co-Based Bulk Metallic Glasses with Good Soft-Magnetic Properties and High Strength</li><li>Chapter 1.5: Conventional and Special Steels</li><li>Influence of Service Time on the Microstructure and High Temperature Mechanical Properties of T23 Boiler Tube</li><li>Critical Crack Tip Opening Displacement for X70 and X80 Steels - A Parametric Study</li><li>Fatigue Crack Growth Rate of High Strength Pipe Steels</li><li>The Microstructure Stability of Super304H Steel Aging at 750 degreesC</li><li>Numerical Study of the Crack-Front Constraint for SENT Specimens of X80 Pipeline Steel</li><li>Effect of Steel Properties on Buckling Pressure of Corroded Pipelines</li><li>The Effect of Twice Thermal Cycle on the Microstructure and Mechanical Properties of Coarse Grain Region in X80 Pipeline Steel</li><li>Estimation of Fracture Toughness <i>J</i><sub>IC</sub> by Miniature Specimen Hydraulic Bulge Test</li><li>Crack Arrest Toughness of High Grade Gas Pipeline</li><li>Effect of Aging Temperature on Microstructure and Properties of V Alloyed High Manganese Austenitic Steel</li><li>Low Temperature Mechanical Properties of Power Transmission Tower Steel</li><li>Hot Ductility of 20Cr13 Steel at High Temperature</li><li>Effect of Precipitates on Austenite Grain Growth Behavior in a Low-Carbon Nb-V Microalloyed Steel</li><li>Research on Mechanical Properties and Wear Behavior at Extremely Low Temperature of a 16Cr-6Ni Austenitic Steel</li><li>Hot Deformation and Dynamic Recrystallization Behavior of Fe-8Mn-6Al-0.2C Steel</li><li>Effect of Pre-Existing Martensite on Bainitic Transformation in Low-Temperature Bainite Steel</li><li>Deformation Behaviors and Constitutive Model of DP1000 under Different Strain Rates</li><li>Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications</li><li>Corrosion Resistance of a Gradient Surface with Cr Alloying on Low-Carbon Steel</li><li>Modeling the Precipitation Kinetics of Cementite in Bainite in 0.17% Carbon Steel</li><li>Tribocorrosion Behaviors of D40 Steel in Artificial Seawater</li><li>Effects of Interstitial Nitrogen Atoms on Atomic Oxygen Adsorption on Fe (001) Surface from <i>Ab Initio</i> Calculations</li><li>Chapter 1.6: Metallic Composites and Compounds</li><li>Numerical Simulation on Filling Process of SiCp/A357 Composites</li><li>Comparison of Residual Stress Measured by Diffraction Method and Matrix Etching Method in SiC Fiber Reinforced Titanium Matrix Composites</li><li>Preparation of AlB<sub>12</sub>-Type Al-B Alloys</li><li>Reciprocating Wear Resistance of PTAW Deposited WC/Ni-Based Composite Overlays</li><li>Analyzing Hysteresis and Thermal Expansion Coefficient of M40/AZ91D during Thermal Cycling</li><li>Process and Properties of Ultrafine Silver-Coated Electrolytic Copper Powders</li><li>Effect of Boron on Microstructure and Properties of Sn-1.0Ag-0.5Cu Low-Silver Lead-Free Solder</li><li>Progress on Preparation, Microstructure and Property of Graphene Reinforced Aluminum Matrix Composite</li><li>Microstructure and Damping Capacity of AlN<sub>p</sub>/Mg-Al Composites with Different Particle Contents</li><li>Preparation and Electrical Conductivity of PANI Coated Nickel Fiber</li><li>Diffusion Bonding in Fabrication TA2 Sheets Enhanced Aluminum Foam Sandwich</li><li>Effect of Spark Plasma Sintering Temperature on the Consolidation of SiC Fiber Reinforced Titanium Alloy Matrix Composites</li><li>Morphology of Intermetallic Compound and Interface Bonding State in Pure Al/Steel Clad Plates after 645 degreesC/1h Diffusion Annealing</li><li>Research Progress on Plastic Processing Techniques of Particulate Reinforced Aluminium Matrix Composites</li><li>Processing and Electrical Properties of Nano-Al<sub>2</sub>O<sub>3</sub>/Cu Composites</li><li>Effect of Si Content of Matrix Alloy on the Microstructure and Properties of Sip/Al-Si-Mg Composites Prepared by Pressure Infiltration Method</li><li>Effect of Mechanical Stirring and Air Pressure on the Fluidity of SiCp/A357 Composites</li><li>Fabrication and Properties of <i>In Situ</i> B<sub>13</sub>P<sub>2</sub> Reinforced Cu-Based Composites</li><li>Effect of Annealing Treatment on the Mechanical Properties of Cu-Ni-Si/Al-Mg-Si Clad Composite Wires</li><li>
<i>In Situ</i> Observation of Diffusion Behavior and Microstructural Evolution on Interfaces in Al/Cu Bimetal</li><li>Elastic Properties, Phonon Focusing and Electronic Structures of Typical Long-Period Superstructures Al<sub>5</sub>Ti<sub>2</sub> and Al<sub>11</sub>Ti<sub>5</sub></li><li>Thermodynamic Calculation of Phase Equilibria in the Mn-RE (RE=Nd, Gd, Dy) Binary Systems</li><li>Thermodynamic Calculation of the Rare Earth Permanent Magnets: Fe-RE (RE=Ho, Er, Tm, Sm) Binary Systems</li><li>Chapter 2.1: Processing Technologies of Structural Materials</li><li>Microstructure Characterization of AZ31B Mg Alloy Welds Processed by Nd:YAG Laser Welding</li><li>Effects of Ultrasonic Impact Treatment on the Residual Stress and Microstructure of TA15 Welded Joint</li><li>Application of State of the Art Assessment for Pipeline Girth Weld</li><li>Metal Magnetic Memory Testing of Welded Joints under Fatigue Load</li><li>Microstructure and Mechanical Properties of X80 Girth Welds with Different Welding Processes</li><li>Mechanical Properties of Micro-Zones of X80 Pipeline Welding Joints</li><li>Fracture and Crack Propagation Behavior of 560 MPa Microalloyed Pipeline Steel under Different Cooling Schedules</li><li>Failure Analysis of Dissimilar Steel Weld Cracking on High and Medium Pressure Guide Pipe</li><li>Microstructure Characterization of Inertial Friction Welding Zone for Nickel-Based Superalloy FGH96</li><li>Welding Performance of Several New Rare Earth Tungsten Electrodes</li><li>Abnormal Grain Growth on the Surface of Cold-Rolled AA1235 Aluminum Plate during the Annealing Process</li><li>The Optimal Selection of Extrusion Parameters of As-Cast TC27 Titanium Alloy Based on Processing-Map</li><li>Microstructure Evolution of Hot-Extruded Cu-15Ni-8Sn Alloy with Different Extrusion Ratios</li><li>A Predictive Model of Hot Rolling Flow Stress by Multivariate Adaptive Regression Spline</li><li>Effect of Solution Treatment on Microstructure and Mechanical Properties of Hot-Extruded Cu-15Ni-8Sn Alloy</li><li>Numerical Simulation on Filling Optimization of Copper Rotor for High Efficient Electric Motors in Die Casting Process</li><li>Filling of Microarray Fabricated by Micro Powder Injection Molding</li><li>Finite Element Simulation of Chain-Die Forming U Profiles with Variable Cross-Section</li><li>Defect Formation Mechanism and Influence of Processing Parameters on Surface Quality of Copper Clad Steel Composite Wires Prepared by Core-Cladding Continuous Casting</li><li>Preparation of Micro-Hole with Large Aspect Ratio</li><li>Effects of Austenitizing Temperature and Cooling Rate on the Mechanical Properties of 36MnVS4 Steel for Automobile Engine Connecting Rod</li><li>Influence of Cooling Rate and Chemical Composition on Phase Transformation and Hardness of C70S6 Steel</li><li>Common Defect Analysis for Large Section Special Steel Forging</li><li>Manufactured Process of High Strength and High Electrical Conductivity Cu-Cr-Zr-Mg Alloy Bars</li><li>Preparation and Fundamental Research of Continuous Through-Porous Pure Aluminum Flat Pipes by Depoling Continuous Casting</li><li>Grain Refinement Mechanism and Effective Nucleation Phase of Al-5Ti-1B Master Alloy</li><li>Effect of High Density Electropulsing Current on Microstructure and Mechanical Properties of Fe-6.5wt.%Si Alloy Sheet</li><li>Microstructure and Magnetic Properties of (Nd<sub>1-2x</sub>Pr<sub>x</sub>Y<sub>x</sub>)<sub>2.28</sub>Fe<sub>13.58</sub>B<sub>1.14</sub> Melt-Spun Alloys</li><li>Effect of Bonding Temperature on Microstructure Development during Transient Liquid Phase Bonding of Ti<sub>2</sub>AlNb Alloy Using Ti-Zr-Cu Based Filler Alloy</li><li>Floating Behavior of Entrapped Gas in Semi-Solid Metal</li><li>Effect of Residual Stress and Microstructures on 316 Stainless Steel Treated by LSP</li><li>Pore Structure Analysis of Large Size Gasar Cu Ingot Prepared by Bridgman Method</li><li>Crack Formation Mechanism of High Silicon Steel during Twin-Roll Strip Casting</li><li>Microstructure and Properties of 1060Al/AZ31/1060Al Composite Plates Fabricated by Explosive Welding</li><li>Numerical Simulation of Temperature Field and Microstructure of a Wide Copper Plate during Warm Mold Continuous Casting</li><li>An Effective Method to Fabricate 5083 Aluminum Alloy with Excellent Corrosion Resistance</li><li>Simulation Analysis of Aluminum Circular Tube in a Two-Stage Porthole Dies Extrusion Process</li><li>Influence of Post Heat Treatment on Microstructure and Mechanical Property of Ti6Al4V Parts Produced by Selective Laser Melting</li><li>Comparison of Microstructure and Mechanical Properties of Aluminum Components Manufactured by CMT</li><li>Numerical Simulation of Hot Die Forging Process of Ti-6Al-4V Alloy Blade</li><li>Strengthening Effects of Single Particle with Different Mechanical Property on Ultra-Thin Rolling of AA1235 Aluminum Alloys</li><li>Effects of Uniaxial Strain on the Structures of Vacancy Clusters in FCC Metals</li><li>A Description of Preferential Sites for Vacancy Formation on Grain Boundaries in Copper by Structural Unit Model</li><li>Chapter 2.2: Technologies and Materials for Coatings</li><li>TiN-Al Composite Coatings on A356 Alloy by Mechanical Alloying</li><li>Ceria Coatings Prepared by Sol-Gel Approach on AZ91 Magnesium Alloy</li><li>Grain Size and Adhesion Strength of the V<sub>8</sub>C<sub>7</sub> Coatings Produced <i>In Situ</i></li><li>Substrate Bias Dependent Microstructure and Properties of TC17 Titanium Alloy Coatings Deposited by Magnetron Sputtering</li><li>Electrodepositing Process of Ni-W-P/Graphene Composite Coatings</li><li>Wear and Corrosion Behaviours of FeCrNiSi Alloy Coatings by Laser Cladding</li><li>Influence of Impurities on the Microstructure and Thermal Shock Resistance of YSZ Coatings</li><li>Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings</li><li>NbN Thin Film of Alternating Textures</li><li>Optimization of MAO Process Parameters and Effect of Subsequent Sealing Treatment on Corrosion Resistance of Aluminum Alloy</li><li>Deposition and Characterization of C-NbN/NbCN Multilayers on Si(100) Substrates</li><li>Fracture Toughness of Tungsten Carbide Reinforced Fe-Matrix Surface Composites</li><li>Microstructure and Properties of TiC Steel-Bonded Carbide Used Fe/Mo Pre-Alloyed Powder as Binder</li><li>Effect of WC and Co on the Microstructure and Properties of TiC Steel-Bonded Carbide</li><li>Selective Electrolytic Corrosion Behaviours of WC in WC-Co Cemented Carbide</li><li>New Equipment for Production of Super Hard Spherical Tungsten Carbide and other High-Melting Compounds Using the Method of Plasma Atomization of Rotating Billet</li><li>Preparation and Microstructure, Mechanical, Tribological Properties of Niobium Carbide Films</li><li>Deposition and Characterization of Reactive Magnetron Sputtered Tungsten Carbide Films</li><li>Effect of Micron-Scale SiO<sub>2</sub> Surface Coating on the Strength of Chemically Strengthened Glass</li><li>Structure Stability and Mechanical Property of Y<sub>2</sub>O<sub>3</sub> Thin Films Deposited by Reactive Magnetron Sputtering</li><li>Thermomechanical and Thermal Gradient Mechanical Fatigue Lifetime of Thermal Barrier Coating Systems</li><li>Preparation and Properties of Heat-Dissipation Coating Filled with Carbon-Based Filler</li><li>Preparation and Characterization of a Novel Hydrogel-Based Fouling Release Coating</li><li>Preparation and Properties of Silicone Based Self-Deicing Coating</li><li>Preparation and Properties of a Self-Deicing Coating Based on Layered Double Hydroxide</li><li>Synthesis and Characterization of Magnetic Al/NiO Composite Pigments with Low Infrared Emissivity</li><li>Thermodynamic Analysis of Ni-Al-WC System during Self-Propagating High Temperature Synthesis</li><li>Preparation of Continuous Al<sub>2</sub>O<sub>3</sub>/Y<sub>2</sub>O<sub>3</sub> Coating on Carbon Fiber by a Novel Aqueous Plasma Electrolysis</li><li>The Effect of Mill Addition of Quartz Glass on Thermal Shock Resistance of Sheet Steel Enamels</li><li>Chapter 3.1: Ceramics, Ferromagnetic Alloys and Materials</li><li>Effects of La Doping on Microstructure and Ferroelectric Properties of BLTN Lead-Free Ceramics</li><li>Synthesis and Characterization of Si<sub>3</sub>N<sub>4 </sub>Nanopowder by RF Induction Thermal Plasma</li><li>Preparation of (K,Na)NbO<sub>3</sub> Powders with Wide Grain Size Distribution</li><li>Effect of Molten NaCl on the Synthesis of Ti<sub>3</sub>SiC<sub>2</sub> Powders</li><li>Negative Thermal Sensitivity of La<sub>1-x</sub>Sr<sub>x</sub>FeO<sub>3</sub> Films Prepared by Screen-Printing Method</li><li>Synthesis and High-Frequency Absorption Property of Flower-Like Nickel-Ferrite Composites</li><li>Dependence of Peak Frequency of Microwave Absorption for Co<sub>2</sub>Z Composite on the Thickness</li><li>Effect of Magnetic Orientation on the Microwave Absorption Properties for Planar-Anisotropy Ce<sub>2</sub>Fe<sub>17</sub>N<sub>3-? </sub>Powders/Silicone Composite</li><li>High Permeability of Z-Type Ferrite Sheets Directional Array</li><li>Synthesis of Uniform Barium Ferrite Powders by Co-Precipitation Method</li><li>Dielectric and Magnetic Properties of Cermets with Iron-Aluminum Dual Metallic Particles</li><li>Synthesis and Thermoelectric Properties of ZnO/Cu<sub>2</sub>SnSe<sub>3</sub> Composites</li><li>Microstructure and Distribution of Low Content Elements in AlNiCo 9</li><li>Preparation of Anisotropic Nd-Lean Nd-Fe-B Magnets with Improved Coercivity</li><li>Dielectric and Conduction Properties of Lu<sub>3</sub>NbO<sub>7</sub> Transparent Ceramic</li><li>Effects of Annealing on Ferroelectric, Optical and Electrically Controlled Light Scattering Properties of PLZT Transparent Ceramics</li><li>Fabrication of High Purity MgO Ceramic Targets by Hot-Isostatic Pressing</li><li>Dielectric Performance of (Pb<sub>1-x</sub>Sr<sub>x</sub>)Nb<sub>2</sub>O<sub>6</sub>-NaNbO<sub>3</sub> Thin Film Materials System: Substitution Effects</li><li>Microstructure of Silicon Nitride Fibers at Elevated Temperatures</li><li>Combustion Synthesis: A Rapid Way for Preparing Bulk Cu<sub>2</sub>SnSe<sub>3</sub> Thermoelectric Materials</li><li>Combustion Synthesis of ?-SiAlON Using 3D Ball Milling</li><li>Effect of Bimodal Granularity Distribution on the Properties of Silica-Based Ceramic Cores</li><li>Permeability Test Method of the Material for Graphite Pressure Vessel</li><li>Chapter 3.2: Semiconductors and Materials for Micro- and Optoelectronics</li><li>Surface Modification of Graphene Oxide with Pyrene Derivatives and their Photo-Switching Behaviors</li><li>Transmission Loss of Membrane-Type Acoustic Metamaterial with Negative Effective Mass</li><li>Complex Permittivity and Permeability Spectra of Nickel/Polyphenylene Sulfide Composite in Radio Frequency Range</li><li>Multi-Walled Carbon Nanotube-Alumina Nanocomposites with Dielectric Resonance-Induced Negative Permittivity Behavior</li><li>High Frequency Electrical and Magnetic Properties of Al/Epoxy Composites Prepared by Insulation Coating Process</li><li>Viscosity and Structure of KDP Aqueous Solution</li><li>Viscosity of Potassium Dihydrogen Phosphate Aqueous Solution within Magnetic Field</li><li>Effects of Deposition Rate on the Structural, Morphological and Optical Properties of Brookite TiO<sub>2</sub> Films Prepared by MOCVD</li><li>Structural, Electrical and Optical Properties of Ternary Al<sub>2</sub><i><sub>x</sub></i>In<sub>2(1-</sub><sub>x</sub><sub>)</sub>O<sub>3</sub> Films Prepared by Metal Organic Chemical Vapor Deposition</li><li>Effect of Doping Concentrations on Properties of Nb Doped ZnO (NZO) Ceramics Targets</li><li>Power-Efficient Phase Change Memory Using Silicon Carbide as a Buffer Layer</li><li>Growth of Single-Crystalline Tris-(8-Hydroxyquinoline) Gallium Uniform Sub-Microrods and their Optical Properties</li><li>Preparation and the Photoluminescence Properties of Er<sup>3+</sup>-Doped MoS<sub>2</sub> Thin Films</li><li>Stability of Sb<sub>2</sub>Te Crystalline Films for Phase Change Memory</li><li>Carbon-Doped Sb-Rich Ge-Sb-Te Phase Change Material for High Speed and High Thermal Stability Phase Change Memory Applications</li><li>Enhanced Fluorescence Emission of Bonding Type Rare Earth Complexes Eu(MAA)<sub>3</sub>Phen</li><li>Structure and Electrochemical Performance of Melamine/Graphene Aerogel Composite for Supercapacitors</li><li>Synthesis and Fluorescence Properties of a Terbium Complex with Ferrocenylazobenzoic Acid in Nanoparticles</li><li>Surface Plasmon Resonance Effect of the MoS<sub>2</sub>/Ag System</li><li>Amorphous NiCoPt/Ce<sub>2</sub>O<sub>3</sub> Nanoparticles as Highly Efficient Catalyst for Hydrogen Generation from Hydrous Hydrazine</li><li>A New Green Approach for Recovery of Metallic Tungsten through Electrolysis of Tungsten Carbide Scrap Anode in Molten Salts</li><li>Removal of NOx by Cement Raw Meal and Biochar Admixture</li><li>Preparation and Adsorption Properties of Fe/Chitosan/Fly Ash Composite</li><li>A Novel Way to Modify PTFE Membrane into Hydrophilicity</li><li>Modification of Nano Spherical-Like MnO<sub>x</sub>/TiO<sub>2</sub> Catalysts with F-Doped</li><li>Experimental Study on Preparation and Operating Conditions over a Promising Monolithic Catalysts for NO<sub>x</sub> Removal: MnO<sub>x</sub>/TiO<sub>2</sub>/Cordierite</li><li>Catalytic Activity of Fe-SBA-15 Prepared by Evaporation-Induced Self-Assembly (EISA) Method</li><li>Freeze-Drying Graphene Aerogels and their Adsorption Ability towards Organic Reagents</li><li>Effect of Sintering Temperature on the Structure and Properties of Attapulgite-Based Nanofibrous Membranes</li><li>Fabrication and Stability of CoAl<sub>2</sub>O<sub>4</sub> Ceramic Pigment for 3D Printing</li><li>Investigation on NaCl Structure and Properties in External Electric Field</li><li>Sensing Mechanism of SnO<sub>2</sub> (110) Surface to NO<sub>2</sub>: Density Functional Theory Calculations</li><li>Chapter 3.3: Building Materials and Construction Technologies</li><li>CO<sub>2</sub> Emission Analysis of Light Aggregate Concrete Block in China</li><li>Energy Consumption Analysis of Building with Typical External Thermal Insulation System</li><li>Effect and Mechanism of Sodium Fluosilicate on Setting Time of Cement</li><li>Influence of Triethanolamine on Strength Development and Hydration of Cementitious Systems Blended with Titanium Slag</li><li>Effect of Anhydrite on the Early Hydration Performance of Rapid Setting and Hardening Belite Sulfoaluminate Cement</li><li>Hardening Performance and Mechanism of Fluosilicate Surface Treatment Agent on Cement-Based Materials</li><li>Putting Cement to Sleep with Sucrose and Waking it up with Ca(OH)<sub>2</sub></li><li>Influence of Triethanolamine on the Properties of Cement-Based Materials</li><li>Effects of Aging on the Low Temperature Properties of Asphalt Binder and its Mixture</li><li>Environment Impact Analysis of Four Different Cement Production Strategies</li><li>Ecological Design of New Type Aluminum-Plastic Composite Panel Based on LCA</li><li>Influence of Quality and Replacement Rate of Recycled Coarse Aggregate on the Frost Resistance of Recycled Concrete</li><li>Influence of Preparation Process on the Performance of Strain Hardening Cementitious Composite</li><li>Effect of Testing Factors on Rietveld Quantitative Analysis of Cement-Matrix Materials</li><li>Water Erosion Resistance Performance of the Pervious Recycled Concrete</li><li>Electromagnetic Shielding Effectiveness of Nickel Fiber-Reinforced Cement Composites</li><li>Properties of the Concrete for the Slab Ballastless Track of CRTS III</li><li>Application of Polycarboxylate Superplasticizer in the Concrete</li><li>Bending Analysis of Functionally Graded Beam Resting on Elastic Foundation by Meshless SPH Method</li><li>Chapter 3.4: Composites and Polymers</li><li>Microstructure and Properties of C-S-H/PCE Nanocomposites</li><li>Preparation and Characterization of Silk Fibroin Based Antibacterial Biotextiles as Wound Dressing</li><li>Dielectric Behavior of Barium Titanate/Carbon Fibers Composites</li><li>Effect of Heat-Treatment on the Properties of PBO Fibers</li><li>Organic Functionalization and Properties of ZnO Nanosheets with Polymer Containing N-Vinyl Carbazole</li><li>Effects of Co, Zr Additions on the Magnetic Properties of Nanocomposite Nd<sub>2</sub>Fe<sub>14</sub>B/?-Fe Magnets</li><li>Impregnation Behavior of Polyamide 6 in Carbon Fibers and the Properties of their Composites</li><li>Dielectric Properties of Epoxy/Anhydride System in Long-Term Storage</li><li>Effects of Poly(Ethylene Glycol) Segment on Physical and Chemical Properties of Poly(Ether Ester) Elastomers</li><li>Structure and Compressive Property of Heterocyclic Aramid Fiber</li><li>Preparation PET Hybrided Materials by <i>In Situ</i> Polymerization for Delustered Fibers</li><li>Copolymerization Modification of PPTA with 2,5-Furandicarboxylic Acid: Towards High-Performance Material with Enhanced Solubility</li><li>Solution Blow Spun High Performance Co-Polyimide Nanofibers</li><li>Rheological Behaviors of Graphene Oxide/Polyacrylonitrile Spinning Solutions</li><li>Continuous Production of Hollow Hydrogel Fibers with Graphene Inner Wall</li><li>Electroplating of Copper on the Continuous Carbon Fibers</li><li>Effect of Draw Ratio on the Microstructure of Silk Fibroin/Graphene Oxide Hybrid Fibers</li><li>Gamma Irradiation Assisted Synthesis of Ag/rGO Composites and their Surface Properties</li><li>Effect of Surface Treatment on the Mechanical Performance of PPTA-Pulp Reinforced Rubber Composites in Supercritical Carbon Dioxide Fluid</li><li>Crystallization Behavior of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) with WS<sub>2</sub> as Nucleating Agent</li><li>Processability and Thermal Property of Poly(Phenylene Sulfide)/Graphene Nanoplatelets Nanocomposites and their Fibers</li><li>Preparation and Characterization of Antibacterial Nylon 6 Fiber</li><li>Photo-Induced Charge Generation of TiO<sub>2</sub> Nanotube Modified with Polymer Containing C<sub>60</sub> under Irradiation of Visible Light and its Applications</li><li>Preparation of Nano Cu-ZnO/PET Fiber for Antibacterial Application</li><li>Fully Biodegradable Films Based on Functionalized Natural Polyphenol/Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) as a Potential Material for Food Packaging</li><li>Nanocomposites of Carbon Nanotube/Polyaniline with Pending Calix[8]Arene and their External Stimuli Response Properties</li><li>High Temperature Resistance of Polyborosilazane/Epoxy Resin Curing System</li><li>Curing Process and Heat-Resistance of Polyethersulfone Toughened Epoxy Resins</li><li>Effect of Different Factors on the Fibrillation Degree of Lyocell Fiber Based on Homogenization Treatment</li><li>Cellulose/Paraffin Composite Fibers for Thermal Energy Storage and Temperature Regulation</li><li>Preparation and Environmental Resistance of Dual-Wavelength Polypropylene Fluorescent Anti-Counterfeiting Fibers</li><li>Preparation and Properties of Copolyesters Fiber with Flame Retardant and Anti-Droplet by <i>In Situ</i> Polymerization</li><li>Functionalization of ?-ZrP by 1,2-Epoxypropane for Further Modification</li><li>Polyaniline Nanofibers Prepared with Binary Oxidant at the Presence of Para-Phenylenediamine</li><li>Preparation and Characterization of Stimuli-Responsive Poly(N-Isopropylacrylamide)/Ca-Alginate Hydrogel Fiber by Microfluidic Spinning</li><li>Doxorubicin Loading Capacity of Shell Cross-Linked Micelles with pH-Responsive Core as Anticancer Drug Delivery Nanocarriers</li><li>Synthesis of Biotinylated pH-Sensitive Glycopolymer with Different Architectures</li><li>Electromagnetic Shielding Effect of Aluminum Foam in 10~500 kV Electrical Substations</li><li>Effects of Multi-Walled Carbon Nanotubes on the Properties of Acrylonitrile Butadiene Styrene Nanocomposites Potentially Used for Fused Deposition Modeling</li><li>Effects of External Heat Radiation on Combustion and Toxic Gas Release of Flame Retardant Cables</li><li>Thermal Aging Effects on Fire Performance of the Cross-Linked Polyethylene Insulated Cable</li><li>Online Measuring Method of Interlaminar Cracks of Laminated Composite Based on Image Processing Technology</li><li>Chapter 3.5: Materials and Technologies in Chemical Engineering</li><li>Allocation of the Environmental Impact in Iron and Steel Industry</li><li>Life Cycle Assessment of Cathode Copper Production</li><li>Comparative Life Cycle Assessment of Chinese Radial Passenger Vehicle Tire</li><li>Materials Flow Analysis of Metallic Titanium in China</li><li>Substance Flow Analysis of Rare Earth Lanthanum in China</li><li>Thermal Decomposition Characteristics and Drying Process of Municipal Sludge</li><li>Extraction of the RO Phase from Steel Slag</li></ul>