THERMEC 2011 Supplement

Preface and Committees
Chapter 1: Aerospace Structural Metallic Materials/Ti Alloys
Consolidation of Ti Powder by a Compression Rotation Shearing System at Room Temperature - Effect of Pivot Rotation Speed on Consolidation
Fatigue Crack Propagation Rates and Local Texture Relationship in 2099-T83 Al-Li Alloy
Chapter 2: Aluminium Alloys
Influence of Mixing Parameters on the Density and Compaction Behavior of Carbon Anodes Used in Aluminum Production
Recovery Behaviour at the Inter-Alloy Region of a Cold Rolled Clad Aluminum Alloy
Al-Li Alloy 2099-T83 Extrusions: Static Mechanical Properties, Microstructure and Texture
Effect of Grain Refinement on Residual Strain and Hot Tearing in B206 Aluminum Alloy
Microstructure Evolution in an Al-Cu-Mg-Ag Alloy during ECAP at 300 degreesC
Analysis on Behavior of Hydrogen in Ion-Plated Pure Aluminum
The Ca-Rich Corner of the Al-Ca-Zn System
Rheo-Extrusion of Hypereutectic Al-14.8Si-4.5Cu-1.1Mg Alloy
Aging Behavior of Al-Mg-Ge Alloys with Different Mg2Ge Contents
The Crystal Structure of the ?'-Phase Including Ag in Al-Mg-Si-Ag Alloy
Investigation of the Substructure Evolution within Grains of Different Orientations during Recrystallization in a Commercial Al Alloy
Microstructural Control of a Zn-Al Eutectoid Alloy by Hot-Rolling
TEM Observation of Cu and Ag Addition Al-Mg-Si Alloys
Behavior of Hydrogen in Electrolytically Charged Aluminum
Variation of Aging Behaviour for TM-Addition Al-Mg-Si Alloys
Behavior of Hydrogen Invasion in Aluminum Alloys from Different Environments
Chapter 3: Biomaterials
Silk Fibroin: A Promising Biomaterial
Study of Cellular Adhesion by Means of Micropillar Surface Topologies
The Role of Collagen Type I on Hematopoietic and Mesenchymal Stem Cells Expansion and Differentiation
On the Interface between Plasma Fluorocarbon Films and 316L Stainless Steel Substrates for Advanced Coated Stents
Monitoring Compliance and Elastic Modulus in a Bioreactor for Optimal Control of Vascular Tissue Growth
Rheological Studies of an Injectable Radiopaque Hydrogel for Embolization of Abdominal Aortic Aneurysms
Fabrication of Artificial Intervertebral Spacer by Functionally Graded Zirconia
Fabrication and Characterization of Porous Implant Products with Aligned Pores by EBM Method for Biomedical Application
Ultrasonic Setup for Testing Hydrogels: Preliminary Experiments on Collagen Gels
The Effect of Dynamical Strain on the Maturation of Collagen-Based Cell-Containing Scaffolds for Vascular Tissue Engineering
Why Mechanical Properties of Collagen Scaffolds Should Be Tested in a Pseudo-Physiological Environment?
Polysaccharides Grafting on Fluorocarbon Films Deposited by Plasma on 316L Stainless Steel for Long Term Stable Stent
Synthesis and Characterisation of New Superelastic and Low Elastic Modulus Ti-Nb-X Alloys for Biomedical Application
Development of a Targeted Drug Delivery System: Monoclonal Antibodies Adsorption onto Bonelike Hydroxyapatite Nanocrystal Surface
Thermal Treatment Effects on Biopolymer Multilayered Thin Films
Improvement of Collagen Hydrogel Scaffolds Properties by the Addition of Konjac Glucomannan
Chapter 4: Composites
Investigating the Potential of TiB2-Based Composites with Ti and Fe Additives as Wettable Cathode
Microstructure and Superconductive Property of MgB2/Al Composite Materials
Microstructure of the New Route Wire Fabrication of V3Ga Compound Superconducting Wire Using High Ga Content Cu-Ga/V Precursor Composite Material
Fabrication of W-12wt%Cu Composites by Powder Metallurgy Method: Activated Sintering
Fabrication and Reaction Mechanism of In Situ TiC and TiB2 Reinforced Mg Matrix Composites
Chapter 5: Energy Materials
Microstructure Evolution in a P911 Steel under Creep Conditions
Chapter 6: Fracture and Mechanical Behaviour
Role of Delamination Fracture for Enhanced Impact Toughness in 0.05 %P Doped High Strength Steel with Ultrafine Elongated Grain Structure
Effect of Die Temperature on Tensile Property of Rheocast Phosphor Bronze
The Brittle-to-Ductile Transition Behaviour in Fe-Al Single Crystalline Alloys
Study of Self-Compacting Fly Ash Concrete Using Silica Fume Admixture
Chapter 7: Friction Stirr Processing
Microstructure, Mechanical and Corrosion Behaviour of AN AA2024-T3 FSW Joint
Improving Friction Stir Welding between Copper and 304L Stainless Steel
Dissimilar Friction Stir Welding of 2014 to 6061 Aluminum Alloys
Microstructure Characterization of Friction Stir Spot Welded TRIP Steel
Microstructure Control and Mechanical Properties of 7075 Aluminum Alloy by Means of Multi-Pass Friction Stir Processing
The Effects of Heat Treatment and Cold Working on the Microstructure of Aluminum Alloys Welded by Friction Stir Welding (FSW) Technique
Investigation of Friction Stir Welding of Stainless Steel Using a Stop-Action-Technique
Influence of Post Weld Heat Treatment on Microstructure and Mechanical Properties of Friction Stir-Welded 2014Al-T6 Alloy
Chapter 8: Fuel Cells & Hydrogen Storage Technologies
Catalytic Properties of TiNi Foils for Methanol Decomposition
Chapter 9: Intermetallics
Strengthening by Addition of Refractory Elements to Ni3(Si,Ti) Intermetallic Alloys
Ductilization of a Ni3(Si,Ti) Intermetallic Alloy by Addition of Interstitial Type Elements
Chapter 10: Magnesium Alloys
Discontinuous and Continuous Precipitation during Aging in Mg-Al System Alloys
HRTEM Observation of the Age Hardening Precipitates in Mg-Gd-Sc Alloys, with Different Gd Concentrations
Microstructure Observation of AM60 Magnesium Alloy Solidified by Rapidly Quench
The Development of Novel Textures in Rare Earth Element Containing Magnesium Alloys
HRTEM Observation of Early Stage of Precipitation in Mg-Gd-Y Alloys
Effect of Zn Content on Aging Behavior of Binary Mg-Zn Alloys
Effect of Zn Contents on Microstructure in AZ-Series Magnesium Alloys
Evolution of as-Cast Microstructure of Mg-Al Alloys with Solute Content and Cooling Rate
Electrochemical Behavior of Mg-6mass%Al Alloy Corroded in Na2SO4 and NaCl Solutions
Effect of Grain Size on Microstructure and Aging Behavior in AM60 Magnesium Alloy
Effect of Al and Mn Contents on Microstructure in AM-Series Magnesium Alloys
Crystallographic Orientation Relationship between Discontinuous Precipitates and the Matrix in AM-Series Alloys
Morphological and Crystallographic Characterizations of the Ca-Mg-Zn Intermetallics Appearing in Ternary Diffusion Couples
Chapter 11: Modelling & Simulation
Effect of Dimensional Variation on Induction Process Parameters Using 2D Simulation
Numerical Simulation of Solidification Behavior and Grain Structure for Multi-Crystalline Silicon Casting and its Experimental Verification
Simulation of Phase Transformation by Analysis of First Derivative of Dilatation Using Avrami Equation during Continuous Cooling in Low Carbon Steels
Influence of Microstructural Inhomogenities on Internal Stress and Strain Distributions during Creep
The Influence of Alloying Elements on Grain Boundary and Bulk Cohesion in Aluminum Alloys: Ab Initio Study
Effects of Minor Elements X(X=Mo, Ni, Ti) on Aympotic Behavior along Peak Top of the Major Elenet in Fe-Cr Type Alloys
On the Onset of Dynamic Recrystallization in Steels
Study of Micro Droplet Impingement Process of Molten Lead-Free Solder by Inkjet Printing Process
Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling
Effect of Mo and Ni on Phase Separation in Fe-Cr=Mo-Ni Quaternary Alloys
Grain Boundary Embrittlement of Fe Induced by P Segregation: First-Principles Tensile Tests
FE Simulation of Metal Orthogonal Cutting Processes Based on 3D Adaptive Remeshing Procedure
Chapter 12: Nanostructured Materials
Surface Modification and Functionalization of Oxide Nanoparticles for Superhydrophobic Applications
Microstructural and Mechanical Characterization of Multilayered Iron Electrodeposits
Temperature Changes during Deformation of Polycrystalline and Nanocrystalline Nickel
Highly Sensitive Pure and Pd-Doped LaFeO3 Nanocrystalline Perovskite-Based Sensor Prepared by High Energy Ball Milling
Synthesis and Characterization of Organic-Inorganic Layered Perovskite Compounds Using Fullerene Derivatives
Preparation of Nanostructured Superhydrophobic Copper and Aluminum Surfaces
Synthesis and Characterization of Polythiophenes Having Phosphonate Ester Groups
Direct Patterning by Inkjet Printing 3-Mercaptopropionic Capped Nano Silver Suspension
Surface Modification of Al Components Using Spark Plasma Sintering
Structure and Magnetic Properties of Mn-Zn Ferrite Synthesized by Glycine-Nitrate Auto-Combustion Process
Corrosion Behaviour of Nanocrystalline Zn-Ni and Zn-Ni-Co Electrodeposits
Crystallographic Features of the A-Type and CE-Type Antiferromagnetic States in the Simple-Perovskite Manganite System Sr1-xNdxMnO3
Fabrication of Organic-Inorganic Nano-Hybrid Materials Containing Oligothiophene Derivatives
Disclosing the Mechanical Properties of Green Calcium-Silicate-Hydrates by Statistical Nanoindentation Techniques
Strain Hardening in Polycrystalline and Nanocrystalline Nickel
Presence of the Ferroelectric Monoclinic State in the Mixed Ferroelectric System Ba(Ti1-xZrx)O3
Thermal Conductivity and Electrical Resistivity in Polycrystalline and Nanocrystalline Nickel
Chapter 13: Neutron Scattering & X-Rays Studies of Advanced Materials
Neutron Diffraction Investigations of a CuAlBe Shape Memory Alloy
Evaluation of Residual Stress in SPR Joint by Neutron Diffraction
Identification of Iron Rusts on Rail by X-Ray Diffraction and Vibrational Analysis
HRTEM Observation of Alpha-Phase in Al Added 60/40 Cu-Zn Alloy
Nondestructive Structure Test of Cam-Shaft Using both Eddy Current and X-Rays
Chapter 14: Severe Plastic Deformation
Simulation of Grain Growth of Materials Produced by Severe Plastic Deformation
Influence of HPT or Rolling on Age-Hardening in Al-Mg-Si Alloys
Submicrocrystalline Structures and Tensile Behaviour of Stainless Steels Subjected to Large Strain Deformation and Subsequent Annealing
Chapter 15: Smart/Intelligent Materials & Processes
Functional Properties of Nanostructured Ti-Ni SMA Produced by a Combination of Cold, Warm Rolling and Annealing
Debonding Characterization of SMA/Polymer Morphing Structures
Design of Active Bias Sma Actuators for Morphing Wing Applications
Characterization of Piezo Fiber-Based Sensors Responses in Multifunctional Composites
Cold Workability, Mechanical Properties, Pseoudoelastic and Shape Memory Response of Silver Added Ti-5Cr Alloys
Martensite Variant Reorientation of NiMnGa/Silicone Composites Containing Polystyrene Foam Particles
Chapter 16: Steels
Influence of the Hot Rolling Process on the Mechanical Behaviour of Martensitic Steel
Very Hard Synchrotron X-Ray Radiation as an Advanced Characterization Method Applied to Advanced High-Strength Steels
Deformation Induced Pearlite Transformation and Spheroidization: Effect of Alloying Additions
Microstructure and Deformation Behavior of a Hot Forged 9%Cr Creep Resistant Steel
Effect of Microstructure on Formation of Ductile Fracture Surface in Steel Plate
Microstructure Characterization of White Layer Formed by Hard Turning and Wire Electric Discharge Machining in High Carbon Steel (AISI 52100)
Precipitation of Si and its Influence on Mechanical Properties of Type 441 Stainless Steel
Effects of Hot-Forging Process on Combination of Strength and Toughness in Ultra High-Strength TRIP-Aided Martensitic Steels
Carbon Distribution and the Influence on the Tempering Behaviour in a Hot-Work Tool Steel Aisi H11
Systematic Approach to Clarify the Mechanism of Dynamic Transformation in Fe-6Ni-0.1C Alloy
'Quenching and Partitioning' - An In Situ Approach to Characterize the Process Kinetics and the Final Microstructure of TRIP-Assisted Steel
Evolution of Microstructure and Mechanical Properties during Annealing of Cold Rolled Fe-24Mn-3Al-2Si-1Ni-0.06C Twip Steel
Topological Analysis of Martensite Morphology in Dual-Phase Steels
Structural Changes in a 304-Type Austenitic Stainless Steel Processed by Multiple Hot Rolling
Bubble Structures, Fishscaling Resistance and Adhesion of Vitreous Enamel to Low Carbon Steel
Investigation on Properties of Bentonite Type in Cold Bonded Pelletization of Flue Dust
Chapter 17: Superalloys
INCONEL 718 Recrystallization in the Delta Supersolvus Domain
Microstructural Evolution of Compacted Graphite Iron under Thermo-Mechanical Fatigue Conditions
Interparticle Liquid Film Formation during Spark Plasma Sintering of Inconel 718 Superalloy
Effect of Electric Field Treatment on Vacancy of Inconel 718 Superalloy at 1073 K
Chatper 18: Surface Engineering/Coatings
Micropatterning Polymer Materials to Improve Endothelialization
Superhydrophobic Surface Elaboration Using Plasma Polymerization of Hexamethyldisiloxane (HMDSO)
Effect of Different Aluminium Surface Treatments on Ice Adhesion Strength
Preparation of Photocatalytic TiO2 Filter by Chemical Surface Treatment from Ti Non-Woven Fabric
Characterization of Microwave Plasma for Polymer Surface Modification Using FTIR Emission Spectroscopy
Formation of Fe-Al Intermetallic Compound Film on Carbon Steel by Shot Peening and Heat Treatment
Tribological Characterization of Electroless Nickel-Boron Coatings
Biology Inspired Superhydrophobic Surfaces
Oxidation Resistance of Al-Rich Aluminide Coating on TiAl Based Alloy by Thermal Spray and Diffusion Treatment
Chapter 19: Thermomechanical Processing: Steels
Formation of Deformation-Induced Divorced Eutectoid Pearlite above the Ae1
Thermomechanical Processing of a Nb-Microalloyed Steel in a Controlled-Forging Treatment
Chapter 20: Welding & Joining
Solid Freeform Fabrication of Al-Li 2199 via Controlled-Short-Circuit-MIG Welding
Degradation Mechanism of Tungsten Electrode for Fusing Joining
Friction Stir Welding of Al-Li AA2199: Parameters, Precipitates and Post Weld Heat Treatment
Determination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V Alloy
Brazing of Cemented Carbides at Lower Temperatures
Studies on Shielded Active Gas Forge Welded API 5CT L80 Material at Different Cooling Rates
Assessment of Mechanical Parameters of PMMA Used in Human Body
Microstructure Investigation of Aluminide Coatings after Platinum Modification Deposited by CVD Method on Inconel 713 LC Ni-Base Superalloy