THERMEC 2011 Supplement

Effect of Dimensional Variation on Induction Process Parameters Using 2D SimulationConsolidation of Ti Powder by a Compression Rotation Shearing System at Room Temperature - Effect of Pivot Rotation Speed on ConsolidationRheo-Extrusion of Hypereutectic Al-14.8Si-4.5Cu-1.1Mg AlloyIdentification of Iron Rusts on Rail by X-Ray Diffraction and Vibrational AnalysisHRTEM Observation of Alpha-Phase in Al Added 60/40 Cu-Zn AlloyNondestructive Structure Test of Cam-Shaft Using both Eddy Current and X-RaysSimulation of Grain Growth of Materials Produced by Severe Plastic DeformationInfluence of HPT or Rolling on Age-Hardening in Al-Mg-Si AlloysSubmicrocrystalline Structures and Tensile Behaviour of Stainless Steels Subjected to Large Strain Deformation and Subsequent AnnealingFunctional Properties of Nanostructured Ti-Ni SMA Produced by a Combination of Cold, Warm Rolling and AnnealingDebonding Characterization of SMA/Polymer Morphing StructuresDesign of Active Bias Sma Actuators for Morphing Wing ApplicationsCharacterization of Piezo Fiber-Based Sensors Responses in Multifunctional CompositesAging Behavior of Al-Mg-Ge Alloys with Different Mg2Ge ContentsCold Workability, Mechanical Properties, Pseoudoelastic and Shape Memory Response of Silver Added Ti-5Cr AlloysMartensite Variant Reorientation of NiMnGa/Silicone Composites Containing Polystyrene Foam ParticlesInfluence of the Hot Rolling Process on the Mechanical Behaviour of Martensitic SteelVery Hard Synchrotron X-Ray Radiation as an Advanced Characterization Method Applied to Advanced High-Strength SteelsDeformation Induced Pearlite Transformation and Spheroidization: Effect of Alloying AdditionsMicrostructure and Deformation Behavior of a Hot Forged 9%Cr Creep Resistant SteelEffect of Microstructure on Formation of Ductile Fracture Surface in Steel PlateMicrostructure Characterization of White Layer Formed by Hard Turning and Wire Electric Discharge Machining in High Carbon Steel (AISI 52100)Precipitation of Si and its Influence on Mechanical Properties of Type 441 Stainless SteelEffects of Hot-Forging Process on Combination of Strength and Toughness in Ultra High-Strength TRIP-Aided Martensitic SteelsThe Crystal Structure of the ß'-Phase Including Ag in Al-Mg-Si-Ag AlloyCarbon Distribution and the Influence on the Tempering Behaviour in a Hot-Work Tool Steel Aisi H11Systematic Approach to Clarify the Mechanism of Dynamic Transformation in Fe-6Ni-0.1C Alloy'Quenching and Partitioning' - An In Situ Approach to Characterize the Process Kinetics and the Final Microstructure of TRIP-Assisted SteelEvolution of Microstructure and Mechanical Properties during Annealing of Cold Rolled Fe-24Mn-3Al-2Si-1Ni-0.06C Twip SteelTopological Analysis of Martensite Morphology in Dual-Phase SteelsStructural Changes in a 304-Type Austenitic Stainless Steel Processed by Multiple Hot RollingBubble Structures, Fishscaling Resistance and Adhesion of Vitreous Enamel to Low Carbon SteelINCONEL 718 Recrystallization in the Delta Supersolvus DomainMicrostructural Evolution of Compacted Graphite Iron under Thermo-Mechanical Fatigue ConditionsInterparticle Liquid Film Formation during Spark Plasma Sintering of Inconel 718 SuperalloyInvestigation of the Substructure Evolution within Grains of Different Orientations during Recrystallization in a Commercial Al AlloyEffect of Electric Field Treatment on Vacancy of Inconel 718 Superalloy at 1073 KMicropatterning Polymer Materials to Improve EndothelializationSuperhydrophobic Surface Elaboration Using Plasma Polymerization of Hexamethyldisiloxane (HMDSO)Effect of Different Aluminium Surface Treatments on Ice Adhesion StrengthPreparation of Photocatalytic TiO2 Filter by Chemical Surface Treatment from Ti Non-Woven FabricCharacterization of Microwave Plasma for Polymer Surface Modification Using FTIR Emission SpectroscopyFormation of Fe-Al Intermetallic Compound Film on Carbon Steel by Shot Peening and Heat TreatmentTribological Characterization of Electroless Nickel-Boron CoatingsBiology Inspired Superhydrophobic SurfacesOxidation Resistance of Al-Rich Aluminide Coating on TiAl Based Alloy by Thermal Spray and Diffusion TreatmentMicrostructural Control of a Zn-Al Eutectoid Alloy by Hot-RollingFormation of Deformation-Induced Divorced Eutectoid Pearlite above the Ae1Thermomechanical Processing of a Nb-Microalloyed Steel in a Controlled-Forging TreatmentSolid Freeform Fabrication of Al-Li 2199 via Controlled-Short-Circuit-MIG WeldingDegradation Mechanism of Tungsten Electrode for Fusing JoiningFriction Stir Welding of Al-Li AA2199: Parameters, Precipitates and Post Weld Heat TreatmentDetermination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V AlloyBrazing of Cemented Carbides at Lower TemperaturesTEM Observation of Cu and Ag Addition Al-Mg-Si AlloysBehavior of Hydrogen in Electrolytically Charged AluminumVariation of Aging Behaviour for TM-Addition Al-Mg-Si AlloysBehavior of Hydrogen Invasion in Aluminum Alloys from Different EnvironmentsSilk Fibroin: A Promising BiomaterialFatigue Crack Propagation Rates and Local Texture Relationship in 2099-T83 Al-Li AlloyStudy of Cellular Adhesion by Means of Micropillar Surface TopologiesThe Role of Collagen Type I on Hematopoietic and Mesenchymal Stem Cells Expansion and DifferentiationOn the Interface between Plasma Fluorocarbon Films and 316L Stainless Steel Substrates for Advanced Coated StentsMonitoring Compliance and Elastic Modulus in a Bioreactor for Optimal Control of Vascular Tissue GrowthRheological Studies of an Injectable Radiopaque Hydrogel for Embolization of Abdominal Aortic AneurysmsFabrication of Artificial Intervertebral Spacer by Functionally Graded ZirconiaFabrication and Characterization of Porous Implant Products with Aligned Pores by EBM Method for Biomedical ApplicationUltrasonic Setup for Testing Hydrogels: Preliminary Experiments on Collagen GelsThe Effect of Dynamical Strain on the Maturation of Collagen-Based Cell-Containing Scaffolds for Vascular Tissue EngineeringWhy Mechanical Properties of Collagen Scaffolds Should Be Tested in a Pseudo-Physiological Environment?Influence of Mixing Parameters on the Density and Compaction Behavior of Carbon Anodes Used in Aluminum ProductionPolysaccharides Grafting on Fluorocarbon Films Deposited by Plasma on 316L Stainless Steel for Long Term Stable StentSynthesis and Characterisation of New Superelastic and Low Elastic Modulus Ti-Nb-X Alloys for Biomedical ApplicationDevelopment of a Targeted Drug Delivery System: Monoclonal Antibodies Adsorption onto Bonelike Hydroxyapatite Nanocrystal SurfaceThermal Treatment Effects on Biopolymer Multilayered Thin FilmsImprovement of Collagen Hydrogel Scaffolds Properties by the Addition of Konjac GlucomannanInvestigating the Potential of TiB2-Based Composites with Ti and Fe Additives as Wettable CathodeMicrostructure and Superconductive Property of MgB2/Al Composite MaterialsMicrostructure of the New Route Wire Fabrication of V3Ga Compound Superconducting Wire Using High Ga Content Cu-Ga/V Precursor Composite MaterialFabrication of W-12wt%Cu Composites by Powder Metallurgy Method: Activated SinteringFabrication and Reaction Mechanism of In Situ TiC and TiB2 Reinforced Mg Matrix CompositesRecovery Behaviour at the Inter-Alloy Region of a Cold Rolled Clad Aluminum AlloyMicrostructure Evolution in a P911 Steel under Creep ConditionsRole of Delamination Fracture for Enhanced Impact Toughness in 0.05 %P Doped High Strength Steel with Ultrafine Elongated Grain StructureEffect of Die Temperature on Tensile Property of Rheocast Phosphor BronzeThe Brittle-to-Ductile Transition Behaviour in Fe-Al Single Crystalline AlloysStudy of Self-Compacting Fly Ash Concrete Using Silica Fume AdmixtureMicrostructure, Mechanical and Corrosion Behaviour of AN AA2024-T3 FSW JointImproving Friction Stir Welding between Copper and 304L Stainless SteelDissimilar Friction Stir Welding of 2014 to 6061 Aluminum AlloysMicrostructure Characterization of Friction Stir Spot Welded TRIP SteelMicrostructure Control and Mechanical Properties of 7075 Aluminum Alloy by Means of Multi-Pass Friction Stir ProcessingAl-Li Alloy 2099-T83 Extrusions: Static Mechanical Properties, Microstructure and TextureThe Effects of Heat Treatment and Cold Working on the Microstructure of Aluminum Alloys Welded by Friction Stir Welding (FSW) TechniqueInvestigation of Friction Stir Welding of Stainless Steel Using a Stop-Action-TechniqueInfluence of Post Weld Heat Treatment on Microstructure and Mechanical Properties of Friction Stir-Welded 2014Al-T6 AlloyCatalytic Properties of TiNi Foils for Methanol DecompositionStrengthening by Addition of Refractory Elements to Ni3(Si,Ti) Intermetallic AlloysDuctilization of a Ni3(Si,Ti) Intermetallic Alloy by Addition of Interstitial Type ElementsDiscontinuous and Continuous Precipitation during Aging in Mg-Al System AlloysHRTEM Observation of the Age Hardening Precipitates in Mg-Gd-Sc Alloys, with Different Gd ConcentrationsMicrostructure Observation of AM60 Magnesium Alloy Solidified by Rapidly QuenchThe Development of Novel Textures in Rare Earth Element Containing Magnesium AlloysEffect of Grain Refinement on Residual Strain and Hot Tearing in B206 Aluminum AlloyHRTEM Observation of Early Stage of Precipitation in Mg-Gd-Y AlloysEffect of Zn Content on Aging Behavior of Binary Mg-Zn AlloysEffect of Zn Contents on Microstructure in AZ-Series Magnesium AlloysEvolution of as-Cast Microstructure of Mg-Al Alloys with Solute Content and Cooling RateElectrochemical Behavior of Mg-6mass%Al Alloy Corroded in Na2SO4 and NaCl SolutionsEffect of Grain Size on Microstructure and Aging Behavior in AM60 Magnesium AlloyEffect of Al and Mn Contents on Microstructure in AM-Series Magnesium AlloysCrystallographic Orientation Relationship between Discontinuous Precipitates and the Matrix in AM-Series AlloysMorphological and Crystallographic Characterizations of the Ca-Mg-Zn Intermetallics Appearing in Ternary Diffusion CouplesMicrostructure Evolution in an Al-Cu-Mg-Ag Alloy during ECAP at 300°CNumerical Simulation of Solidification Behavior and Grain Structure for Multi-Crystalline Silicon Casting and its Experimental VerificationSimulation of Phase Transformation by Analysis of First Derivative of Dilatation Using Avrami Equation during Continuous Cooling in Low Carbon SteelsInfluence of Microstructural Inhomogenities on Internal Stress and Strain Distributions during CreepThe Influence of Alloying Elements on Grain Boundary and Bulk Cohesion in Aluminum Alloys: Ab Initio StudyEffects of Minor Elements X(X=Mo, Ni, Ti) on Aympotic Behavior along Peak Top of the Major Elenet in Fe-Cr Type AlloysOn the Onset of Dynamic Recrystallization in SteelsStudy of Micro Droplet Impingement Process of Molten Lead-Free Solder by Inkjet Printing ProcessMulti-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced CoolingEffect of Mo and Ni on Phase Separation in Fe-Cr=Mo-Ni Quaternary AlloysGrain Boundary Embrittlement of Fe Induced by P Segregation: First-Principles Tensile TestsAnalysis on Behavior of Hydrogen in Ion-Plated Pure AluminumFE Simulation of Metal Orthogonal Cutting Processes Based on 3D Adaptive Remeshing ProcedureSurface Modification and Functionalization of Oxide Nanoparticles for Superhydrophobic ApplicationsMicrostructural and Mechanical Characterization of Multilayered Iron ElectrodepositsTemperature Changes during Deformation of Polycrystalline and Nanocrystalline NickelHighly Sensitive Pure and Pd-Doped LaFeO3 Nanocrystalline Perovskite-Based Sensor Prepared by High Energy Ball MillingSynthesis and Characterization of Organic-Inorganic Layered Perovskite Compounds Using Fullerene DerivativesPreparation of Nanostructured Superhydrophobic Copper and Aluminum SurfacesSynthesis and Characterization of Polythiophenes Having Phosphonate Ester GroupsDirect Patterning by Inkjet Printing 3-Mercaptopropionic Capped Nano Silver SuspensionSurface Modification of Al Components Using Spark Plasma SinteringThe Ca-Rich Corner of the Al-Ca-Zn SystemStructure and Magnetic Properties of Mn-Zn Ferrite Synthesized by Glycine-Nitrate Auto-Combustion ProcessCorrosion Behaviour of Nanocrystalline Zn-Ni and Zn-Ni-Co ElectrodepositsCrystallographic Features of the A-Type and CE-Type Antiferromagnetic States in the Simple-Perovskite Manganite System Sr1-xNdxMnO3Fabrication of Organic-Inorganic Nano-Hybrid Materials Containing Oligothiophene DerivativesDisclosing the Mechanical Properties of Green Calcium-Silicate-Hydrates by Statistical Nanoindentation TechniquesStrain Hardening in Polycrystalline and Nanocrystalline NickelPresence of the Ferroelectric Monoclinic State in the Mixed Ferroelectric System Ba(Ti1-xZrx)O3Thermal Conductivity and Electrical Resistivity in Polycrystalline and Nanocrystalline NickelNeutron Diffraction Investigations of a CuAlBe Shape Memory AlloyEvaluation of Residual Stress in SPR Joint by Neutron DiffractionInvestigation on Properties of Bentonite Type in Cold Bonded Pelletization of Flue DustStudies on Shielded Active Gas Forge Welded API 5CT L80 Material at Different Cooling RatesAssessment of Mechanical Parameters of PMMA Used in Human BodyMicrostructure Investigation of Aluminide Coatings after Platinum Modification Deposited by CVD Method on Inconel 713 LC Ni-Base Superalloy