
Advanced Materials Engineering and Technology IV
Trans Tech Publications Ltd (Publisher)
Published on 20. June 2016
Book
Paperback/Softback
638 pages
978-3-0357-1020-5 (ISBN)
Description
The International Conference on Advanced Material Engineering & Technology (ICAMET 2015) is the premier forum for the presentation of new advances and research results in the fields of Advanced Material Engineering and Technology. This book covers the entire range of basic and applied aspects of the synthesis and characterization, modelling, processing and application of advanced engineering materials including construction materials, coating, semiconductor and biotechnology.
The International Conference on Advanced Material Engineering & Technology (ICAMET 2015) is the premier forum for the presentation of new advances and research results in the fields of Advanced Material Engineering and Technology. This book covers the entire range of basic and applied aspects of the synthesis and characterization, modelling, processing and application of advanced engineering materials including construction materials, coating, semiconductor and biotechnology.
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 32 mm
Weight
1200 gr
ISBN-13
978-3-0357-1020-5 (9783035710205)
DOI
10.4028/b-lJhCE1
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions

Mohd Mustafa Al Bakri Abdullah | Liyana Jamaludin | Rafiza Abd Razak
Advanced Materials Engineering and Technology IV
Software
06/2016
Trans Tech Publications Ltd
€351.09
Shipment within 10-20 days

Mohd Mustafa Al Bakri Abdullah | Liyana Jamaludin | Rafiza Abd Razak
Advanced Materials Engineering and Technology IV
E-Book
05/2016
Trans Tech Publications Ltd
€211.86
Available for download
Persons
Eds. Mohd Mustafa Al Bakri Abdullah, Liyana Jamaludin, Rafiza Abd Razak, Muhammad Faheem Mohd Tahir
Content
<ul><li>Preface, Committees</li><li>Chapter 1: Materials and Technologies for Soldering and Packaging in Electronics</li><li>Intermetallic Study on the Modified Sn-3.5Ag-1.0Cu-1.0Zn Lead Free Solder</li><li>Solderability and Interfacial Intermetallic Compound (IMC) Growth of Sn-Cu-Ni Solder with Additions of Germanium</li><li>The Effects of Zinc Addition on the Microstructure, Melting Point and Microhardness of Sn-0.7Cu Lead-Free Solder Fabricated via Powder Metallurgy Method</li><li>Properties of Aluminum Matrix Composite (AMCs) for Electronic Packaging</li><li>Effects of Wetting Behavior on Gallium Addition in In-Zn Solder Alloy</li><li>The Alloying and Aging Effects on the Wettability and Intermetallic Bonding of the Sn-Zn-Cu-Bi Soldering Alloy on a Cu Substrate</li><li>Nanoindentation Study on Heat Treated Gold Wire Bonding</li><li>Directional Growth Behaviour of Intermetallic Compound of Sn3.0Ag0.5Cu/ImSn Subjected to Thermal Cycling</li><li>Nanoindentation of Sn3.0Ag0.5Cu/ENIG Solder Joint after High Temperature Storage</li><li>Solidification of Sn-3Ag-0.5Cu and Sn-0.7Cu-0.05Ni Solders</li><li>Effects of Trace Phosphorus in Sn-Cu-Ni Wave Solder Dross</li><li>Suppression of Cu<sub>3</sub>Sn with Ni in High Cu Containing Sn-Cu Solder Alloys</li><li>Peritectic Reactions and Phase Transformations of Sn-30wt%Cu for High Temperature Pb-Free Soldering Applications</li><li>XPS Analysis of Oxide Films on Lead-Free Solders with Trace Additions of Germanium and Gallium</li><li>Improvement of Sn-0.7Cu Lead Free Solder Joints on Shear Strength with Addition of Titanium Oxide (TiO<sub>2</sub>) Particles</li><li>Surface Roughness and Wettability of SAC/CNT Lead Free Solder</li><li>Wettability of CNT-Doped Solder under Isothermal Aging</li><li>Mechanical Interlocking on Leadframe Surface for Bondability of Au Wedge Bond</li><li>Ultrasonic Vibration in Leadframe for the Bondability for Au Wedge Bond</li><li>Wettability of Soldering Alloys at Heating by Electron Beam</li><li>Mechanical and Electrical Properties of Carbon Nanotubes Based Isotropic Conductive Adhesives</li><li>Chapter 2: Materials for Electronics, Optoelectronics and Electrotechnical Industry</li><li>Effect of Loading Amount of Glucose Precursor on Mesoporous Carbon Surface Area for Supercapacitor Electrode Application</li><li>Effect of Al Excess on the Band Structure of ZnO Using Density Functional Theory</li><li>Microwave Irradiation Assisted Synthesis of Silicon Carbide Nanotubes</li><li>Characterization of Silicon Carbide Nanowhiskers Synthesized by Microwave Heating Using Photoluminescence Spectroscopy and Fourier Transform Infrared Spectroscopy</li><li>Synthesis of Silicon Carbide Nanowhiskers from Graphite and Silica of Different Ratio by Microwave Irradiation Assisted Synthesis</li><li>Effect of Stoichiometry and Sintering Temperature on the Mechanical Properties of Zinc Ferrite (Zn<sub>x</sub>Fe<sub>3-x</sub>O<sub>4</sub>)</li><li>p-Type Conductivity Control in ZnO Films Grown by Molecular-Beam Epitaxy</li><li>Synthesis and Characterization of Ni<sub>0.8</sub>Zn<sub>0.2</sub>Fe<sub>2</sub>O<sub>4 </sub> Nanoparticles by Self-Combustion Technique</li><li>Synthesis of Chlorophyll Thin Film from Noni Leaves via Dip Coating Process</li><li>Properties of Y<sub>3</sub>Fe<sub>5</sub>O<sub>12</sub> (YIG) as Nanocatalyst for Ammonia Formation Produced from Magnetic Induction Method (MIM)</li><li>Response Surface Methodology (RSM) in Fabrication of Nanostructured Silicon</li><li>Chapter 3: Composite and Polymer Materials</li><li>Rigid Polyurethane Foam with Ionic Liquid Modified Multi Walled Carbon Nanotubes Composites</li><li>The Effects of Trans-Polyoctylene Rubber (TOR) on the Cure Characteristics and Swelling Behaviour of Activated Carbon Filled Styrene Butadiene Rubber (SBR) Vulcanizates</li><li>Composite Materials Characterization for Aircraft Application</li><li>The Influence of Blending Methods in Epoxy/PMMA Polymer Blend</li><li>Development of Seamless Pipe Based on Al/Al<sub>2</sub>O<sub>3 </sub> Composite Produced by Stir Casting and Centrifugal Casting</li><li>Effects of Composition and Fe on the Liquid Phase Sintered W-Brass Composites</li><li>Palm Kernel Shell Filled Recycled High-Density Polyethylene: Effect of Filler Loading</li><li>Chapter 4: Materials and Processing Technologies for Mechanical Engineering</li><li>Control of Temperature in Cutting Zone in Machining of Alloyed Case-Hardened Steels by Applying a Ceramic Tool with Wear-Resistant Coatings</li><li>Comparative Evaluation of Properties of Various Tool Materials by Area of Indentation Track in Pendulum Scratch Testing</li><li>Edge Cutting Tools for Machining of Hard-to-Cut Materials</li><li>Specifics of Application of Cutting Ceramics with Functional Coating in Turning of High-Strength Materials</li><li>Influence of Tool Rotational Speed on the Mechanical Properties of Friction Stir Welded Al-Cu-Li Alloy</li><li>Effect of Sensitization Treatment on Corrosion Properties in Austenitic Stainless Steel 304</li><li>Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061 in Mixture of Phosphoric Acid and Oxalic Acid</li><li>The Effect of Sintering Temperature to the Microstructure of PM F75 (Co-Cr-Mo) Alloy</li><li>Two-Step Solution Heat Treatment of AlSiCu Alloy for Improvement of Mechanical Properties</li><li>A New Free-Machining Steel Containing Bismuth and Calcium</li><li>The Effect of Solution Heat Treatment on Incipient Melting of Al<sub>2</sub>Cu Intermetallic Phase in Lightweight Materials</li><li>Ageing Response of Powder Metallurgy AZ91 and AZ91 Reinforced with Multiwall Carbon Nanotube</li><li>Microstructure and Mechanical Properties of Friction Stir Welded AA2195-T0</li><li>Thermal Aging of Dissimilar-Metal Weld Joints for Reactor Pressurized Vessels at Elevated Temperature</li><li>Microstructural Evolution of Austenitic Stainless Steel AISI304 and AISI316 Subjected to High-Temperature Thermal Aging</li><li>Effect of Concentration of Oxalic Acid on the Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061</li><li>Segregation Measurement of Inconel 718 Feedstocks Used in Low-Pressure Metal Injection Molding</li><li>Precision Hole Making on Laminates Composite: Comparison between Drilling and Punching</li><li>Chapter 5: Construction Materials</li><li>Dynamic Increase Factor of High Strength Concrete with Silica Fume at High Strain Rate Loading</li><li>Experimental Study on Internal RH of BFS Mortars at Early Age</li><li>Strength of Portland Cement with Several Composition of Bottom Ash in Different Fineness with Curing Time of 28 Days</li><li>The Barriers and Strategies of Implementing the New Building Material (Fibre Cement Wall) in Malaysia Case Study: Aurum Synergy, Perlis, Malaysia</li><li>Dolomite Quarry Waste as Sand Replacement in Sand Brick</li><li>An Experiment on Bond Properties of Reinforcements Embedded in Ultra High Performance Concrete</li><li>Bond-Slip Relation of Pretensioned Concrete Members for Various Tensioning Forces</li><li>Assessment of Reinforced Concrete Building with Soil Structure Interaction Effect under Vertical Earthquake</li><li>The Temperature Effect to the Concrete due to the Single Strike of High Electric Current</li><li>Indoor Air Quality of Fired Clay Brick Incorporated with Mosaic Sludge</li><li>Leachability of Heavy Metals from Steel Mill Sludge Incorporated in Fired Clay Brick</li><li>Leaching of Heavy Metals Using TCLP and SPLP Method from Fired Clay Brick Incorporating with Mosaic Sludge</li><li>Properties of Steel Mill Sludge Waste Incorporated in Fired Clay Brick</li><li>Experimental Study of Slurry Infiltrated Fiber Reinforced Concrete</li><li>The Chemical Composition and Fineness of Natural Cement at Different Raw Meal Proportion</li><li>Effect of Chromium (II, III) Oxide and Cobalt Oxide on the Colour and Fineness of Cement</li><li>Mechanical Properties of Volcanic Ash Based Geopolymer Concrete</li><li>Potential of Geopolymer Mortar as Concrete Repairing Materials</li><li>Review on Different Types of Geopolymer Concrete Fibres</li><li>Effect of Coal Ash Properties on Compressive Strength of Bottom Ash-Based Geopolymer Concrete</li><li>Microstructure and Mechanical Properties of Ambiently-Cured Blended Coal Ash-Based Geopolymer Concrete</li><li>Effect of NaOH Concentration on Flexural Strength, Phase Formation and Microstructural Development of Kaolin Geopolymer Ceramic</li><li>Effect of Ultra High Molecular Weight Polyethylene (UHMWPE) as Binder and Sintering Temperature in Kaolin Geopolymer Ceramics on Flexural Strength</li><li>The Use of Borax in Deterring Flash Setting of High Calcium Fly Ash Based Geopolymer</li><li>Simulation Behavior of Flexure in Reinforced Concrete Beam with Opening Reinforced with Glass Fiber Reinforced Polymer (GFRP)</li><li>Flexural Behaviour of Patch-Repair Material Made from Unsaturated Polyester Resin (UPR)-Mortar</li><li>Optical Data Support on Flexural Strength of Kaolin Coated Lumber Wood via Geopolymer Technology</li><li>Chapter 6: Biomedical Engineering and Biotechnologies</li><li>Study on a Fractional Model of Filtration Effect of Cigarette Filter Tip</li><li>Preparation and Characterization of Chitosan/Alginate Polyelectrolyte Complex Prepared by Using Calcium Tripolyphosphate Ionic Gelator</li><li>Analysis on Fluid Characteristics in Y-Shape Bifurcate Coronary Artery</li><li>Performance of Newly-Fabricated Modular Surface Plasmon Resonance (mSPR) Sensor</li><li>Simultaneous Saccharification and Co-Fermentation (SSCF) Using Banana and Pineapple Waste as Substrate</li><li>Optimization of Eugenol Ester Using Statistical Approach of Response Surface Methodology</li><li>Facile Synthesis of Activated Carbon from Swamp Taro Stalk via Single Step ZnCl<sub>2</sub> Activation</li><li>Synthesis and Characterization of Biomass Supported Ag, Co and Ag-Co Nanoparticles</li><li>Chapter 7: Materials and Technologies for Textile Industry</li><li>Dyeing of Nylon Fabric with Natural Dye from Cassia Fistula Fruit: A Research on Effect Metal Mordants Concentration</li><li>Dyeing Silk Fabric with Natural Dye from Longan Leaves Using Simultaneous Mordanting Method</li><li>Dyeing Properties of Nylon Fabrics with Mangrove Bark Extract via Mordanting Methods</li><li>Extraction and Tensile Behavior of High Performance <i>Hibiscus tiliceus</i> Fiber</li><li>Printing of Silk Fabric with Reactive Dye Using Flour of Wild Taro Corm as a Resist Printing Paste</li><li>Chapter 8: Materials and Technologies for Recycling and Treatment of Industrial Waste</li><li>Removal of Iron and Manganese Using Cascade Aerator and Limestone Roughing Filter</li><li>Characterization of Alum Crystals Synthesized from Waste Aluminium Beverage Cans</li><li>Removal of Cadmium and Zinc Contaminations in Landfill Leachate by Using Electrocoagulation Process</li><li>Hot Solvent Extraction Method for Recycle Epoxy Resin in Waste Printed Circuit Board with Polyethylene Glycol</li><li>Kinetics and Isotherm Studies on Nd(III) Adsorption onto Xanthated Chitosan</li><li>Tin (Sn) Recovery from Wave Soldering Lead Free Solder Dross via Hydrochloric Acid Leaching and Combustion Treatment</li><li>Removal of Iron (Fe) in Rice Husk via Citric Acid Leaching Treatment</li><li>Acid Treatment of Aluminium Dross: Properties and Application</li><li>Chapter 9: Engineering Research and Design</li><li>Landslide Simulation Using Limit Equilibrium and Finite Element Method</li><li>Correlation of Brillouin Stokes Signals and Optical-Signal-to-Noise-Ratio in Multi-Wavelength Brillouin Fiber Laser with Additional Fiber Bragg Grating</li><li>Mathematical Modelling of Stress-Strain State of Multilayer Shell Molds</li><li>Theoretical Prediction of Crack Formation in Axisymmetric Multilayer Shell Molds</li><li>Structure Characterization of Low Cost Fabricated Soft Material Built Microchannel</li><li>Maximal Predicable Time Scale of Gas Emission about Fully Mechanized Mining Face</li><li>Numerical Simulation of Pressure Loss in Largesize Annulus of Deepwater Drilling Riser</li><li>The Shielding Materials from EM Radiation for Aircraft Fuselage</li><li>SAC-OCDMA over Indoor Optical Wireless Communication (OWC) System Based on Zero Cross Correlation (ZCC) Code</li><li>Optimization of Output Coupling Ratio for Multi-Wavelength Brillouin Fiber Laser Employing FBG and DCF as Gain Medium</li></ul>