Chinese Ceramics Communications II

Hydrogen Fluoride Adsorption Ability of some Inorganic CompoundsInfluence of Salt Aid on Combustion Synthesis of Nanocrystalline CeO2 PowdersPreparation and Properties of the ZnO Nanopowder with Chemical Liquid-Phase MethodPreparation of SiO2 Encapsulated ZnO Nanopowders by Sol-Gel MethodPreparation of Flower-Like ZnO Micro-Sphere Powders and their Surface Wettability ModificationPreparation of ZnO Nanopowders by One-Step Hydrothermal SynthesisPreparation of Nano-TiO2 in Inverse Micro-Emulsion System with Compound SurfactantEffect of TiCl4 Concentration and Acidity on Size and Phase of TiO2 Nanopowders Prepared by Non-Hydrolytic Sol-Gel MethodPreparation of TiO2 Nanopowders by Solvothermal SynthesisSolvothermal Synthesis and Photocatalysis of SnO2 Nanocrystal MicrospheresHydrothermal Synthesis of Walnut-Like a-Ni(OH)2 Architectures and their In Situ Thermal Convention to NiOPreparation and Photoluminescence of In2O3 Nanofibers by ElectrospinningFabrication of Porous Structured SnO2/In2O3 Composite by Solid-Phase Reactive SinteringPreparation of ZrO2 Spherical Nanoparticles Used for Photonic CrystalSynthesis and Characterization of 3Y-TZP by Gel Solid-State MethodPreparation and Characterization of Porous Acicular Mullite CeramicsSynthesis of Platelet Alumina PowdersLow-Temperature Combustion Synthesis of Cordierite Powder and its CharacteristicSynthesis of SrTiO3 Powders by Gel Solid State Reaction MethodPreparation and Characterization of Monodispersed BaTiO3 Nanocrystals Using One-Step Solvothermal MethodBarium Zirconium Titanate Powders Prepared by Sol?Gel MethodPreparation of Zn3Nb2O8 by Chemical Co-PrecipitationPreparation of ZnNb2O6 Powders by Molten Salt MethodSynthesis of Multiferroic BiFeO3 Powders by Sol-Gel Auto-CombustionSynthesis and Photocatalytic Properties of Bi2Ti2O7 Nano-PowdersPreparation of LiMn2O4 by a Solution Combustion Synthesis Using Acetic Salts and Acetic Acid as Starting MaterialsPreparation of Lithium Orthosilicate Ceramic Pebbles by Molten Spray Method ProcessPreparation and Characteristics of Pr1.2Sr0.8NiO4-Sm0.2Ce0.8O1.9 Composite Powders for Solid Oxide Fuel Cell Cathode ApplicationsPreparation of Lanthanum Molybdate Powers by Sol-GelFabrication of Bi-2223 Powders Using Sol-Gel MethodPreparation and Characterization of Fused Silica Micro-Powders and CeramicsProperties of SnO-B2O3-SiO2 Lead-Free Glass PowderCharacterization of Ultrafine Glassy Powder for Al-Si-Ca-P-O-F Polynary System by Sol-Gel MethodBismuth Ferrite Nanopowders Prepared by Sol-GelTechnological Conditions and Magnetic Properties of Y-Type Hexaferrite Prepared by Chemical Co-Precipitation MethodPreparation and Surface Modification of Fe3O4 Nano-Magnetic PowdersExperimental Study of Property of Magnetic Nanoparticle Prepared in Different TemperaturesSynthesis, Characterization and the Growth Formation of Spindle-Like CdS NanostructuresHydrothermal Synthesis, Photoluminescence Property and Superhydrophobicity of In(OH)3Preparing Fluorhydroxyapatite by Aqueous Precipitation MethodExperimental Study on Transition Heat Adjustment of CaCl2?6H2OFabrication of Spherical Thermal-Conductive Silicon Nitride PowderPorous Silicon Nitride Prepared by Cold Isostatic PressureFabrication of Aluminium Nitride by Electrophoretic DepositionPhase Assembly of Ti2SnC PowdersPreparation and Performance Characterization of Active Coal Gangue Powder (ACGP) Used for Cement AdmixtureEffect of Bentonite on Properties of Fly Ash-Based Porous CeramicsPreparation and Characterization of Meso-Porous Alumina SpheresPreparation of Highly Permeable Al2O3 Hollow Fiber Membrane via Phase Inversion Method with Ethanol as External CoagulantPreparation and Characterization of Porous Alumina Insulation Materials by Gel-FoamingSynthesis, Characterization and Optical Property of Uniform Bi2S3 NanorodsPreparation and Characterization of Alumina Nanofibers by Gas-Solid Reaction MethodSynthesis and Photoelectrocatalytic Property of Two-Nonmetal-Codoped TiO2 Nanotube Arrays with High Aspect RatioIron-Zircon Pigments Prepared by Non-Hydrolytic Sol-Gel Method at Low TemperatureEffect of Modification Powders on Low Alloy Cast SteelRF Plasma Synthesis of Nickel Nanoparticles from Liquid PrecursorNano-Au/C Catalysts for the Selective Oxidation of Glucose into GluconateEffects of AgNO3 Concentration on the Preparation of Nano-SilverPreparing Flake Silver Powder by High-Energy Ball MillingPreparation of Micro-Sized Silver Powder Utilized in Paste for Solar Cell Grid ElectrodePreparation of Flake Silver Coated over Copper PowderPreparation of Ultrafine Tungsten-Based Alloy Powders by GNP-Reduction MethodPreparation of Cu-Zn Alloy by Different High Energy Ball MillingPreparation and Property of Al87Ce3Ni8.5Mn1.5 Nanophase Amorphous CompositesDispersion Properties of Li1.075Nb0.625Ti0.45O3 Powders in Aqueous MediaA Calcination Technology for Ultrafine La3NbO7 Powder Prepared by Sol-Gel ProcessInfluence of Lanthanum on Microstructure and Dielectric Properties of Barium Titanate Ceramics by Solid State ReactionLow Temperature Sintering and Microwave Dielectric Properties of Ba4Nd9.33Ti18O54 Ceramics Doped with Crystallizable GlassStructure and Piezoelectric Properties of (K,Na)NbO3 Ceramics Fabricated from Microwave Hydrothermal Synthesized PowdersEffect of Low-Temperature Frit on the Sintering Behavior and Properties of 0.95K0.49Na0.51NbO3-0.05LiSbO3 Lead-Free PiezoceramicsElectrical Characteristics and Microstructures of Eu2O3-Doped Bi4Ti3O12 Thin FilmsElectrical Characteristics and Microstructures of Ce2O3-Doped Bi4Ti3O12 CeramicsFerroelectric Properties and Microstructures of La2O3-Doped Bi4Ti3O12 CeramicsFerroelectric Properties of Bismuth Titanate Ceramics by Dy3+/V5+ SubstitutionFerroelectric Properties of Bi3.25La0.75Ti2.97V0.03O12Electrical Characteristics and Microstructures of Gd-Doped Bi4Ti3O12 CeramicsElectrical Characterization and Microstructures of La-Doped Bi4Ti3O12 Thin FilmsElectrical Characteristics and Microstructures of Dy-Doped Bi4Ti3O12 CeramicsStudy on (n+n) Type Acetone Gas SensorPreparation and Gas-Sensing Properties of CdFe2O4 Semiconductor MaterialsSpark Plasma Sintering of Two Commercial Al2O3 PowdersFabrication of Al3Bc3-Based Porous Ceramics by Pressureless SinteringInfluence of Clay Materials on Acicular Mullite Porous CeramicPreparation of High Thermal Expansion Coefficient Glass-Ceramics in Li2O-ZnO-SiO2 SystemSpectral Transmittance of Six All-Ceramic Core Materials after Veneering CeramicEffect of Background Color on In-Ceram and Cercon All-Ceramic Core MaterialInfluence of Preparation Parameters on the New NSR Catalyst Support MaterialPreparation and Characterization of the Typical Pt-NSR CatalystStudy on the Dispersion of Graphite as Pore FormerFormation of Carbon with One-Dimensional Nanostructure on the Surface of Graphite Coated by Ni-SaltStructure Analysis of Type-A Zeolites Molecular Sieve Prepared from StelleriteInteraction between Hydroxyapatite and CollagenThe Compatibility of Magnesium Hydroxide Whiskers in Organic PhaseEffect of CTBN on Properties of Oxide Graphene/Epoxy Resin CompositesPreparation and Properties of Oxidized Graphene (OG)/Epoxy Resin (EP) Composite via Ultrasonic OscillationMicrostructures and Properties of Woodceramics Prepared from Bagasse and Epoxy Resin CompositePreparation and Characterization of AlOOH/Polyimide Nanocomposite MembraneThermodynamic Analysis of Aluminum Oxide-Coated Titanium DidoxideThermodynamic Analysis of Doped Titanium Dioxide Powders by Coprecipitation-Coating ProcessCrystal Structure and Thermal Expansion of Ge-Doped Mn3CuNOptical Properties of Mg(OH)2 Using First-Principles MethodCASTEP Calculation of Surface Property of Mullite Composites and Analysis of Crystal Growth HabitInvestigation on ABS Hydrophobic and Oleophobic ProcessesInfluencing Factors on the Determination of Corundum Particle Parameters by SEM and Image AnalysisObservation Technique of Internal Microstructure of Micro-Powder by Electron Microscopy
In Vivo Stability and Biodistribution of Quantum Dots by Inductively Coupled Plasma-Atomic Emission SpectrometryThe Efficiency Change of Spiral Classifier with Different Overflow Discharge MethodsDrying Kinetics of Granules in a Fluidized Bed DryerDrying Model of Paste Materials in Fluidized Bed with Inert Particles and Immersed Heating TubesInfluences of Different Calcination Ambiences on Phase Composition, Morphologies of Ceramic Coatings on Ti?6Al?4V Alloy by Micro-Arc OxidationPreparation of Barium Titanate Powders by Gel-Solid Reaction