Advanced Materials Science and Technology II

Load Support Improvement on Superhydrophobic Surface in Lubricated-MEMS Using Numerical InvestigationApplication of Serpentine Flux Path Method into a Magnetorheological Valve by FEMM SimulationFluctuation Theorem Application on 2-D Granular Materials ConfigurationsNumerical Investigation of the Plastic Contact Deformation between Hemispheres: Variation of Radii Ratio and Normal LoadsOptimization of Solvent System and Polymer Concentration for Synthesis of Polyvinyl Alcohol (PVA) Fiber Using Rotary Forcespinning TechniqueA Symbolic Computation of the Gravity Effect on the Electromagnetic Properties of MaterialsNumerical Solutions to Fast Transient Pipe Flow ProblemsLongitudinal Profiles of Atom Laser Propagation in a Cigar-Shaped TrapPerformance Simulation on a Magnetorheological Valve Module Using Three Different Commercial Magnetorheological FluidThe Effect of a Hydrophobic Coating Material on Friction in a Micro-Slider Bearing: A Numerical AnalysisTheoretical Studies of the Effects of Magnetic Field on the Phase Transition of Swollen Liquid Crystal ElastomersInvestigation on the Elastic Modulus of Rubber-Like Materials by Straight Blade Indentation Using Numerical AnalysisEstimation of Van der Waals Interaction Using FTIR SpectroscopyInvestigation on the Effect of B2O3 Additive on Microstructure and Magnetic Properties of Barium HexaferriteCharacterization of Main-Chain Liquid Crystal Elastomers by Using Differential Scanning Calorimetry (DSC) MethodTransition Insulator-Metal and Antiferromagnetic-Paramagnetic Cu Doped in La0.47Ca0.53MnO3The Effect of KOH Activation in Synthesis and Characterization of Zeolitic Imidazolate Frameworks-8 (ZIF-8) Templated Mesoporous CarbonThe Effect of Low Vacuum Curing to Physical and Magnetic Properties of Bonded Magnet Pr-Fe-BThe Effect of Powder Particle Size on the Structural and Magnetic Properties of Bonded NdFeB MagnetPoly(aniline-co-m-aminobenzoic acid): A Novel Ester Vapor Sensor and its Thin Film Deposition on Silane Functionalized SAM Glass SurfacePreparation, Characterization and Catalytic Activity of Sulfated Zirconia by Varied Sol-Gel MethodSynthesis of LiCoxMn2-xO4 by Low Temperature Solid-State Reaction for Cathode MaterialTexture Analysis of the Hot Rolling Austenitic Cr-Ni Steel Using Neutron Diffraction MethodThe Effect of Milling Time and Sintering Temperature on Synthesis of PbTiO3 by Mechanical AlloyingMicrostructure of AA7075 Based Composite by Accumulative Roll Bonding ProcessAluminum-Carbon Metal Matrix Composites: Effect of Carbon Fiber and Aspect Ratio on the Mechanical PropertiesCrystalline Characterization and Dielectric Constant of Barium Strontium Titanates Prepared by Solid State ReactionDevelopment of Geopolymer from Fly Ash and Metallurgical SlagMagneto-Conductance Effect of Natural Porphyrin Thin Films Fabricated by Spin Coated MethodThe Effect of Mixing Time on the Morphology and Mechanical Properties of Imperatacylindrica CelluloseThermoelectric Properties Enhancement of NaCo2O4 through Ca Atom Partial Substitution on Na AtomThe Influence of Alkali Treatments on Tensile Strength and Surface Morphology of Cellulose MicrofibrilsThe Effect of Glycerol and Oil Palm Empty Fruit Bunches Microcrystalline Cellulose Loading on Tensile Properties and Water Absorption of Cassava Starch CompositeBenefeciation of Derived Bovine Bone Waste Hydroxyapatite Obtained from Meatballs Sellers and its CharacterizationPreliminary Study on the Biocompatibility of Stainless Steel 316L and UHMWPE MaterialA Bipolar Artificial Hip Joint Design for Contact Impingement ReductionChitosan Membrane with Blending of Rice Hull Ash Silica and Polyethylene Glycol for Cu(II) Adsorption in Aqueous SolutionSynthesis of Biodegradable Plastic Films from Oil Palm Empty Fruit Bunch CelluloseThe Influence of Heat and Two Stages Precipitation in the Process of Natural Polymer Purification from the Byproduct of Bioethanol Process Base on Empty Palm Fruit BunchPreparation of Chitosan-Alginate/PES Pervaporation Membranes for Bioethanol DehydrationThe Influence of Adding Bio Inhibitor Sarang Semut (Myrmecodia pendans) to Carbon Steel API 5L Grade B in Solution of HCl 1 MThe Effect of Sandblasting and Electropolishing on the Surface Roughness and Corrosion Rate of AISI 316L Stainless SteelThe Effect of the Wall Thickness on Wear of an UHMWPE Acetabular LinerSputtering of Titanium in Co-Cr-Mo Alloys for Orthopedic Implant MaterialsComparison between Conventional and Ultrasonic Preparation of Chitosan from Shrimp Shells WasteSynthesis of Isopropyl Esters from Jatropha Curcas Oil at Short Time ReactionEffect of Acidic and Basic Environment to the Degradation Behavior of PLGA Nanocapsules for Biomedical ApplicationEvolution of ZnO Nanoflower-Like Structure Formation and Growth during Synthesis and Paste PreparationStudy on Morphology of Electrospun SiOC FibersThe Influence of ZnO Components on the Photocatalytic Activity of Fe3O4-CuO-ZnO NanocompositesSynthesis of Sulfur-Doped Carbon Dots by Simple Heating MethodFabrication of PVA Fibers Loaded with Fe3O4 Nano Particles Using ElectrospinnerPhysical Properties and Photocatalytic Activity of Fe- and Co-Doped ZnO Nanoparticles Synthesized via Surfactant Modified Co-PrecipitationFabrication of Carbon Nanomaterial Using Arc-Discharge in Liquid Method for Battery ApplicationSynthesis and Fabrication of Nanoparticle-Based Thin Layer of Natural PorphyrinEffect of Temperature on Silver Nanorods Synthesized by Polyol MethodInfluence of Grain Size to Resistivity Relaxation of La0.7Sr0.3MnO3 NanoparticlesPhotocatalytic Decolorization of Malachite Green in the Presence of Fe3O4/TiO2/CuO NanocompositesSynthesis and Characterization of Al2O3 Nanoparticles and Water-Al2O3 Nanofluids for Nuclear Reactor CoolantEffect of the Concentration of Zinc Oxide Nano Fluid for Enhancing the Performance of Stirling EngineFabrication of Poly(acrylonitrile)/PAN Nanofiber Using a Drum Collector Electrospinning System for Water Purification ApplicationPhotocatalytic Degradation of Methylene Blue Using TiO2/Carbon Nanoparticles Fabricated by Electrical Arc Discharge in Liquid MediumTransition Metal (Ni, Cr)-Doped ZnO Assisted CTAB Performance on Decolorization of Organic DyesPhotocatalytic Degradation of Methylene Blue and Methyl Orange with Fe-Doped ZnO Nanoparticles Modified with Natural Zeolite and Montmorillonite: Comparative StudyThermal Characterization of Bacterial Cellulose/Polyvinyl Alcohol NanocompositeEffect of Catalyst Preparation Method on the Characteristics of Carbon Nanospheres as Anode Materials of Lithium Secondary Batteries
In Vitro Release Characteristics of Hydrophobic Breast Cancer Drug Loaded Poly Lactic-co-Glycolic Acid (PLGA) NanoparticlesMontmorillonite Incorporated in Cr Doped ZnO Nanoparticles for Degradation of Organic Dyes in Water under UV Light IrradiationCo-Sensitization Promoted Light Harvesting Capability of Dye-Sensitized Solar Cell (DSSC) Using Anthocyanin-Based DyeThe Effect of Addition of Indigenous Silica Powder from Lampung on the Concrete Performance after 1 Year Curing TimeUtilization of Fly Ash for a Support Layer of Pervaporation MembraneThe Effect of Sokka Clay on the Tensile and Burning Properties of rPP/Clay CompositeHot and Cold of Pressing Effect on ECAP-Parallel Channel Composite Based on Al/ANF MaterialReducing Energy Consumption through Innovative Glass Layering Construction with Polyethylene Bubble Wrap at 2nd Floor Dean Faculty RoomEffect of Drying Time on Mechanical Properties of Natural Rubber Products Filled with Modified Kaolin Prepared from Latex DippingHigh Temperature Oxidation of the Hot Rolled ZrNbMoGe Alloy for Fuel Cladding Material of Pressurized Water ReactorSensitivity Improvement of Conducting Polymer Based Sensor to Vehicle Emission Gas by Using Imprinting MethodHighly Oriented ZnO:Al Thin Films as an Alternative Transparent Conducting Oxide (TCO) for Windows Layer of Solar CellsPhysical and Chemical Modification of Sorghum Flour for the Potential Substitute of Wheat FlourPotential Implementation of Electronic Waste Based Magnetite Powder for Magnetorheological ElastomersShellac Coated Hydroxyapatite (HA) Scaffold for Increasing Compression StrengthUse of Natural Silica Sand as a Component for Prospective Fuel Cell Sealing MaterialsEffect of Aging on Mechanical Properties of Natural Rubber Latex Products Filled with Alkanolamide-Modified Cassava Peel Waste Powder (CPWP)Apparent Activation Energy in High Frequency Microwave Sintering of Alumina CeramicHeating Time Dependent Pore Size of Porous Composite from Waste GlassIdentification of Carbon Dots in Waste Cooking Oil